feat(subdevices): support multi-indoor-unit systems (#177)
Samsung 2-in-1 air conditioners put more than one logical indoor unit behind a single IP and a single DTLS session. Only the unit the config entry was set up against was ever discovered; the second one -- a whole physical appliance the user can see in SmartThings -- had no entities at all. Two reporters turned out to have two different mechanisms: ARTIK051_DONGLE_FAC_18K -- indexed siblings. /oic/res registers the whole tree discoverable and lists three complete parallel resource sets whose trailing path segment is the index (/mode/vs/0, /mode/vs/1, ...), on OCF-standard and vendor hrefs alike. /device/0's batch carries only the index-0 hrefs, so a sibling is reachable only through its own /device/<n> collection. TP2X_FAC_BORA_21K -- UUID-prefixed tree. /oic/res hides the appliance tree entirely (which is why a direct /device/1 probe returns nothing on this board). /subdevices/vs/0 carries subdeviceIdList instead, and that UUID appears as a literal href prefix; /<uuid>/information/vs/0 was confirmed live to return the wall unit's own model and serial (TP2X_FAC_BORA_RAC_21K) against the master's TP2X_FAC_BORA_21K. The detection signals don't overlap on either board, so no disambiguation is needed -- enumeration checks both and takes what answers. Both patterns are the same thing underneath: a logical unit is a seed collection path to poll plus an href transform between the canonical href the registry knows and the actual on-the-wire href. That is the whole abstraction (SubUnit), applied at four boundaries -- discovery, the coordinator, the adapter, and the platforms. Capabilities, the registry and the climate composite stay written against canonical hrefs and are untouched. Uniqueness comes from a key_prefix inside the flattened state key, so the master unit's keys are byte-identical to every release before this and every existing golden file is an unchanged regression guard. Each sub-unit gets its own device-registry entry linked by via_device and named from its own /information/vs/<n>, so it lands in its own room rather than crowding the master's device page. A sub-unit materializes only when it yields at least one primary (non-diagnostic) entity with a populated value. That gate is not decoration: the reporter's /device/2 is an unused slot that SmartThings shows disabled, yet it answers with a full 14-href batch, and it flattens to exactly one non-None value -- a diagnostic alarm_code derived from an empty /alarms/vs/2. Without the entity-category filter it becomes a phantom third climate card. The rule is deliberately domain-agnostic rather than a list of HVAC hrefs, so a multi-drum washer (#19) gets the same treatment with no new curation. Units that answer but fail the gate are logged and reported in diagnostics, so a genuinely missing unit stays diagnosable from a dump. Enumeration fetches things that must not then be treated as appliance state. A rejected candidate's seed has to be read to evaluate the gate, but only units that pass are polled again, and StateCache has no eviction -- so discovery runs before the first cache apply and those reps are held aside for diagnostics rather than frozen into the cache forever. /multidevice/vs/0 is probed on every device regardless of family, so merging it into the resources dict would have reached discovery on any board whose registry doesn't ignore that href -- only the air conditioner one does -- raising a spurious coverage-gap repair for a washer or fridge whose firmware answers it. It is corroborating metadata (numofsubdevice, confirmed read-only) and now lives beside the resources rather than in them. Diagnostics reports each unit separately: top-level `resources` is this unit's own and only its own, which is what the module docstring and the adding-device-support skill have always claimed it was, and each sibling or rejected candidate carries its own reps canonicalized so a block reads exactly like the master's instead of needing to be de-indexed by hand. Fixtures are real captures. The ARTIK051_DONGLE_FAC_18K one is entirely verbatim, both sibling seeds and the hand-read /multidevice/vs/0 included. The TP2X_FAC_BORA one has a real device0, oic_res and sub-unit /information/vs/0, with the remainder of that unit's tree constructed and documented as such in seeds_note; /<uuid>/device/0 is the one part of that pattern still inferred rather than observed, and can't be tested through the debug panel because a Collection returns a list.
This commit is contained in:
33 files changed
+5277
-125
No files matched your search
@@ -185,6 +185,17 @@ Samsung's firmware occasionally drops the DTLS session briefly — this is norma
|
||||
|
||||
If reconnects become persistent (more than a handful per minute), something's actually wrong. Check the appliance's Wi-Fi link first, then look for a competing DTLS client on the LAN — only one active session per appliance is allowed at a time.
|
||||
|
||||
### Multi-indoor-unit ("2-in-1") air conditioner systems
|
||||
|
||||
Some Samsung installs run more than one indoor unit off a single outdoor unit, all reachable over the *one* IP/DTLS session your config entry connects to (a floor-standing + wall-mounted 2-in-1 is a common shape). The integration discovers any sibling units automatically, once, right after the first successful poll — there's nothing to configure. Each discovered unit gets its own HA device (linked to the main one via "via device") and its own `climate` card, so it lands in its own room in the dashboard instead of being invisible or mixed into the master unit's state.
|
||||
|
||||
Two on-the-wire shapes are supported, both keyed off what the appliance itself reports:
|
||||
|
||||
- **Indexed siblings** — the device answers a `/device/1`, `/device/2`, ... collection alongside its own `/device/0`, mirroring every resource at that index.
|
||||
- **UUID-prefixed tree** — the device reports a sibling's id in `x.com.samsung.da.subdeviceIdList`, and that id doubles as a literal href prefix for the sibling's own resource tree.
|
||||
|
||||
A candidate that answers but never produces any real, user-facing state (an unused slot some installs report alongside a genuine second unit) is silently skipped rather than turned into a phantom entity — check diagnostics' `sub_units`/`sub_units_skipped` blocks if a unit you expect to see isn't showing up, and file an issue with that diagnostics download attached.
|
||||
|
||||
---
|
||||
|
||||
## Contributing
|
||||
|
||||
Reference in new issue
Block a user