Fix range hood fan power targeting and kimchi mode write validation

- _speed_zero_is_off now keys off the hood resource's own
  settableMinFanSpeed/supportedFanSpeed fields instead of asking whether
  the device has any power resource at all, so a combi appliance's cavity
  /power/0 can no longer be toggled off by turning off just the vent fan.
- async_turn_on() no longer resets an already-running fan to its lowest
  speed when called without a percentage.
- _has_separate_power() reads through the O(1) resource cache instead of
  copying the full resource snapshot on every property access.
- _kimchi_mode_write rejects values the compartment didn't advertise in
  supportMode instead of writing them blind.
- kimchi_ripening_status no longer lowercases its value, since it has no
  enum catalog entry to translate the lowercased token back through.
- Documented why KIMCHI_DOOR_GENERIC isn't deduped against the /doors/vs/0
  aggregate fallback on the one fixture that reports both.

Adds regression tests for the combi-appliance power targeting, the
already-on turn_on no-op, kimchi mode write validation, and a kimchi
select display/write casing round-trip; a translation-coverage guard for
kimchi_zone_mode codes mirroring the existing AC preset one.

tests/test_fridge_capabilities.py

@@ -241,25 +241,85 @@ class TestKimchiZone:
 
     def test_write_derives_path_from_href(self):
         desc = fridge.KIMCHI_ZONE.entities[0]
+        rep = {'x.com.samsung.da.supportMode': ['KIMCHI_STORAGE_COLD']}
         path, body = desc.write_fn(
-            'KIMCHI_STORAGE_COLD', {}, href='/status/kimchi/middle/vs/0')
+            'KIMCHI_STORAGE_COLD', rep, href='/status/kimchi/middle/vs/0')
         assert path == ['status', 'kimchi', 'middle', 'vs', '0']
         assert body == {'x.com.samsung.da.currentMode': 'KIMCHI_STORAGE_COLD'}
 
     def test_write_without_href_is_rejected(self):
         desc = fridge.KIMCHI_ZONE.entities[0]
-        assert desc.write_fn('KIMCHI_STORAGE_COLD', {}) is None
+        rep = {'x.com.samsung.da.supportMode': ['KIMCHI_STORAGE_COLD']}
+        assert desc.write_fn('KIMCHI_STORAGE_COLD', rep) is None
 
-    def test_ripening_status_is_lowercased(self):
+    def test_write_rejects_value_outside_supportmode(self):
+        """A value the compartment never advertised is rejected rather than
+        written blind -- this write path is unconfirmed against real
+        hardware (module docstring above KIMCHI_ZONE), so a bad value here
+        is a food-safety-adjacent outcome, not just a cosmetic one."""
+        desc = fridge.KIMCHI_ZONE.entities[0]
+        rep = {'x.com.samsung.da.supportMode': ['KIMCHI_STORAGE_COLD']}
+        assert desc.write_fn(
+            'KIMCHI_STORAGE_WARM', rep, href='/status/kimchi/middle/vs/0',
+        ) is None
+
+    def test_ripening_status_passes_through_device_value(self):
+        """No device_class='enum' catalog entry exists for this sensor, so
+        lowercasing it would only make the raw device token un-translatable
+        by HA -- pass the device's own casing straight through instead."""
         desc = next(e for e in fridge.KIMCHI_ZONE.entities if e.key == 'ripening_status')
-        assert desc.value_fn('Off') == 'off'
-        assert desc.value_fn(None) is None
+        assert desc.value_fn('Off') == 'Off'
 
     def test_door_reuses_open_state_helper(self):
         desc = fridge.KIMCHI_DOOR_GENERIC.entities[0]
         assert desc.rep_fn({'x.com.samsung.da.openState': 'Open'}) is True
         assert desc.rep_fn({'x.com.samsung.da.openState': 'Close'}) is False
 
+    async def test_zone_mode_select_round_trips_through_display_casing(self):
+        """kimchi_zone_mode's displayed value (lowercase, catalog-translated)
+        and the raw device code it writes back can silently drift apart --
+        this is the one place that casing conversion could break. Runs
+        through the real discovery/select pipeline against the tp2x_ref_20k
+        kimchi fixture rather than a hand-built descriptor, so it also
+        catches use_instance_name key derivation going wrong."""
+        from custom_components.localthings.registry.adapter import flatten
+        from custom_components.localthings.registry.by_type import refrigerator
+        from custom_components.localthings.registry.discovery import discover
+        from custom_components.localthings.registry.entities import SelectDesc
+        from custom_components.localthings.select import LocalThingsSelect
+        from tests.conftest import _load_device
+
+        resources = _load_device('refrigerator_tp2x_ref_20k_kimchi')
+        bound = discover(
+            resources, refrigerator.REGISTRY.capabilities,
+            refrigerator.REGISTRY.pattern_capabilities,
+        )
+        mode_bound = next(
+            b for b in bound
+            if isinstance(b.desc, SelectDesc) and b.href == '/status/kimchi/middle/vs/0'
+        )
+
+        class _FakeCoordinator:
+            device_serial = 'TEST-SERIAL'
+
+            def __init__(self, resources, data):
+                self.last_resources = resources
+                self.data = data
+                self.commands = []
+
+            async def async_send_command(self, bound, value):
+                self.commands.append(value)
+
+        coordinator = _FakeCoordinator(resources, flatten(bound, resources))
+        entity = LocalThingsSelect(coordinator, mode_bound)
+
+        assert entity.current_option == 'kimchi_storage_normal'
+        assert 'kimchi_storage_cold' in entity.options
+
+        await entity.async_select_option('kimchi_storage_cold')
+
+        assert coordinator.commands == ['KIMCHI_STORAGE_COLD']
+
 
 class TestArtik051AndTp2xFixturesHaveCompleteCoverage:
     """issue #20 (ARTIK051_REF_17K) and #26 (TP2X_REF_20K) both triggered

tests/test_golden_regression.py

@@ -615,7 +615,7 @@ def test_registry_reproduces_golden_state_keys_for_microwave_me7500d():
     a standalone hood this board has no sibling `/power/0` or
     `/power/vs/0` resource, so fan.py's LocalThingsRangeHoodFan treats
     fan speed 0 as the off state instead of writing a separate power
-    resource -- see its `_has_separate_power` check. This board also has
+    resource -- see its `_speed_zero_is_off` check. This board also has
     no `/temperatures/vs/0` or `x.com.samsung.da.hood.autoOperation`
     field, unlike MW7300B, so `setpoint`/`current_temp_c` and
     `automatic_operation` are correctly absent here."""

tests/test_range_hood_fan.py

@@ -98,12 +98,43 @@ async def test_power_write_falls_back_to_vendor_resource():
 # itself the off state.
 # ---------------------------------------------------------------------------
 
+def test_standalone_hood_has_separate_power():
+    """Explicit converse of the microwave case below: guards the
+    discriminator itself, not just its downstream effects, so a future
+    change to it fails loudly here instead of only via behavioral drift."""
+    entity = _entity(_load_device('range_hood'))
+    assert entity._has_separate_power() is True
+    assert entity._speed_zero_is_off() is False
+
+
 def test_microwave_vent_fan_has_no_separate_power_resource():
     resources = _load_device('microwave_me7500d')
     assert '/power/0' not in resources
     assert '/power/vs/0' not in resources
     entity = _microwave_entity(resources)
     assert entity._has_separate_power() is False
+    assert entity._speed_zero_is_off() is True
+
+
+async def test_combi_microwave_with_cavity_power_still_treats_zero_speed_as_fan_off():
+    """A combi over-the-range microwave can report a /power/0 resource for
+    the cavity while the vent fan still has no power resource of its own
+    (settableMinFanSpeed '0' -- same board shape as microwave_me7500d).
+    _speed_zero_is_off must key off the hood resource itself, not merely
+    "some power resource exists on this device", so turning the fan off
+    writes fan speed rather than the shared cavity power resource."""
+    resources = _load_device('microwave_me7500d')
+    resources['/power/0'] = {'value': True}
+    resources['/hood/fanspeed/vs/0']['x.com.samsung.da.hood.fanSpeed'] = '2'
+    coordinator = _FakeCoordinator(resources)
+    entity = _microwave_entity(resources, coordinator)
+
+    assert entity._has_separate_power() is True
+    assert entity._speed_zero_is_off() is True
+
+    await entity.async_turn_off()
+
+    assert coordinator.commands[-1][1] == ('speed', '0')
 
 
 def test_microwave_vent_fan_off_state_excludes_zero_from_speed_codes():
@@ -153,3 +184,37 @@ async def test_microwave_vent_fan_set_percentage_writes_speed_only():
     await entity.async_set_percentage(100)
 
     assert coordinator.commands == [(entity._bound, ('speed', '4'))]
+
+
+async def test_microwave_vent_fan_turn_on_with_percentage_writes_speed_directly():
+    resources = _load_device('microwave_me7500d')
+    coordinator = _FakeCoordinator(resources)
+    entity = _microwave_entity(resources, coordinator)
+
+    await entity.async_turn_on(percentage=75)
+
+    assert coordinator.commands == [(entity._bound, ('speed', '3'))]
+
+
+async def test_microwave_vent_fan_turn_on_without_percentage_when_already_on_is_a_noop():
+    """A scene or automation calling fan.turn_on on an already-running vent
+    fan must not reset it to the lowest speed."""
+    resources = _load_device('microwave_me7500d')
+    resources['/hood/fanspeed/vs/0']['x.com.samsung.da.hood.fanSpeed'] = '3'
+    coordinator = _FakeCoordinator(resources)
+    entity = _microwave_entity(resources, coordinator)
+
+    await entity.async_turn_on()
+
+    assert coordinator.commands == []
+
+
+async def test_microwave_vent_fan_set_percentage_zero_turns_off():
+    resources = _load_device('microwave_me7500d')
+    resources['/hood/fanspeed/vs/0']['x.com.samsung.da.hood.fanSpeed'] = '2'
+    coordinator = _FakeCoordinator(resources)
+    entity = _microwave_entity(resources, coordinator)
+
+    await entity.async_set_percentage(0)
+
+    assert coordinator.commands[-1][1] == ('speed', '0')

tests/test_translations.py

@@ -210,3 +210,27 @@ def test_every_ac_convenient_mode_code_has_a_preset_label():
             missing.append((path.name, code))
     assert missing == []
 
+
+def test_every_kimchi_zone_supportmode_code_has_a_state_label():
+    """Same guard as the AC preset one above, for KIMCHI_ZONE's
+    kimchi_zone_mode select (fridge.py, issue #26): the write path resolved
+    from options_field is fully dynamic too, so an unlabelled supportMode
+    code across any /status/kimchi/<slot>/vs/0 resource would silently
+    render as its raw device token instead of the translated state.
+    """
+    state_labels = set(
+        _load("en")["entity"]["select"]["kimchi_zone_mode"]["state"]
+    )
+    fixtures_dir = Path(__file__).parent / "fixtures"
+    missing = []
+    for path in sorted(fixtures_dir.glob("*_device.json")):
+        dump = json.loads(path.read_text())
+        for item in dump.get("device0", []):
+            href = item.get("href", "")
+            if not (href.startswith("/status/kimchi/") and href.endswith("/vs/0")):
+                continue
+            for code in item["rep"].get("x.com.samsung.da.supportMode", []):
+                if code.lower() not in state_labels:
+                    missing.append((path.name, href, code))
+    assert missing == []
+