AIComfort isn't a distinct thermodynamic operation like Cool/Dry/Heat --
it's an AI-driven overlay on top of the device's own 'Auto' behavior,
confirmed by A-CAWW-TP2-20-COMMON reporting both 'Auto' and 'AIComfort'
as separate, mutually-exclusive entries in /mode/vs/0's supportedModes.
Modeled the idiomatic HA way instead of a flat _DEVICE_TO_HVAC entry:
hvac_mode reports AUTO and a new 'ai_comfort' preset carries the
distinction. Entered/left only via the preset (writes the primary mode
resource, not the convenient one) -- there's no dedicated HVACMode
value for it, so it's not offered in the hvac_mode dropdown directly.
Also adds a once-per-(href, code) warning log when a device-reported
mode has no entry in the relevant map, so a future gap like this one
surfaces in the log instead of silently vanishing -- the exact failure
mode issue #93 called out ("this class of gap is invisible without
diffing against supportedModes").
A-CAWW-TP2-20-COMMON (and likely other CAWW/TP2X-class boards) reports
'AIComfort' as a distinct entry in /mode/vs/0's supportedModes,
alongside 'Auto' (already mapped to HEAT_COOL). _read_modes() silently
drops any code missing from _DEVICE_TO_HVAC, so AIComfort was
unreachable -- one of HA's five other AC hvac_modes, unused by this
device family until now.
The other two gaps in issue #93 are already addressed elsewhere and
not duplicated here:
- Fan-only via the 'Fan' device code, and the WindFree/LongWind/
NanoSleep preset codes, are covered by the still-open PR #91, which
replaces the static preset table with a fully dynamic resolver over
the device's own supportedModes.
- The 'Left_And_Right' -> horizontal swing mapping is already on the
still-open claude/device-support-issue-75-windfree-ac branch.
The TP2X_WATERPURIFIER_20K water purifier reports no oneUiVersion and
its modelNum/description don't match any consumer-prefix or existing
board-family token, so it fell into the unknown-device-type fallback
with only common capabilities. Add a new water_purifier registry,
routed via a 'WATERPURIFIER' modelNum/description fallback rule.
Models dispense settings (type/temperature/capacity/pouring status),
sterilize and filter status, favorite-capacity presets, and the three
water/buzzer locks. Per the adding-device-support skill's "never
hard-code the one dump's values" rule: dispense-capacity bounds and
step come live from the device's own desiredCapacityRange/
capacityResolution fields (range_field/step_fn), not a hardcoded
constant, and the hot-water-temperature control is a select over the
live supportedHotTemperatures list rather than a number with invented
bounds, since only a few discrete temperatures are selectable.
/mode/vs/0 and /automation/waterpurifier/vs/0 are left unmodeled: the
former carries an opaque wizard-workflow token with no coherent
current-value contract, the latter is a static support-flags blob with
no live setting to expose.
Confirmed against the issue #90 diagnostics dump with zero unbound
hrefs. Updates the README's supported-appliance-types table for the
new device type.
The AW06C7155EWAZ window air conditioner (modelNum
TP1X_DA_AC_WAC_01001_0000) reports no oneUiVersion and uses the '_WAC_'
(Window Air Conditioner) modelNum token instead of the '_RAC_'/'_PRAC_'
tokens already handled by for_device_by_model. Add a fallback rule for
that token, routing it to the existing airconditioner registry.
The device's resource surface (mode/convenient/wind/temperature/power/
filter/humidity) is already fully modeled by the airconditioner
capability set, so this is purely a detection-routing fix -- confirmed
against the issue #87 diagnostics dump with zero unbound hrefs.
The ARTIK051_DONGLE_REF firmware family reports the literal string
"Nothing(SVC)" as serialNum on every unit -- non-empty, so the existing
`if not serial` checks in config_flow.py's _probe_and_validate and
coordinator.py's _run_discovery don't catch it. Two such appliances on
one install (a fridge and a freezer, each its own dongle) then collide:
config_flow gives both the same unique_id and rejects the second as
"already configured" (bug 2), and even once that's worked around,
device_serial feeds every entity's unique_id too, so the second
appliance's entities get silently dropped with "does not generate
unique IDs" log lines (bug 4).
Add _is_placeholder_serial (duplicated in both modules rather than
imported, to avoid pulling config_flow into the runtime coordinator's
import graph or vice versa for a two-line check) and treat it the same
as an empty serial: fall back to host/port.
Type detection (bug 1) and the door sensor's field-name gap (bug 3),
also reported in this issue, are already fixed via the
claude/device-support-issue-77-freezer branch, which hit the same
ARTIK051_DONGLE_REF family from a different report -- not duplicated
here.
Five raw course codes were rendering unlabeled because no translation
entry existed for them, confirmed by the reporter selecting each cycle
on the physical appliance and reading back the raw code from the
entity's state:
- washer_cycle_table_02: '52' Eco Cold, '54' Towels, '60' Self Clean+
(a WF50A8600AV/US). '54' shares a display name with the existing '24'
Towels -- a different code on the same table legitimately landing on
the same label, matching the existing '21'/'65' Colors and
'27'/'5E' Rinse+Spin pairs, not a duplicate-in-error.
- dryer_cycle_table_03: '01' Normal, '06' Time dry (a DVE50A8600V/A3,
the same model added in the previous commit's detection fix).
No code changes -- select.py already derives which raw values it
normalizes from the shipped catalog, so labelling a code is purely a
translations/en.json (mirrored to nl.json) addition.
DVE50A8600V/A3 reports description
'DA_WM_TP1_21_COMMON_DVE50A8800_8600/DC92-02835A_0080' -- a paired
listing of two related model numbers (DVE50A8800 and DVE50A8600) joined
by an underscore, rather than the usual single trailing consumer-model
token. for_device_by_model only ever checked the literal last
underscore segment ('8600', which has no recognizable 2-letter prefix
on its own), so the real 'DV' token one segment earlier was never
reached and the device fell back to 'unknown' with only common
capabilities -- no dry level, cycle, or wrinkle-prevent entities.
Replace the single last-segment extraction with _consumer_model_key,
which scans segments from the end and returns the first one that
resolves. Behavior is unchanged for every existing single-token
description (the last segment still matches first); it just keeps
looking when that segment doesn't.
Three gaps reported against an ARTIK051_PRAC_20K WindFree unit vs. the
SmartThings integration:
1. Missing WindFree/motion convenient-mode presets -- left alone here.
PR #91 replaces climate.py's static _DEVICE_TO_PRESET table with a
generic resolver that reads any preset code straight off the unit's
own supportedModes, which already covers this (and more generically
than a per-model dict would) -- adding one here would just conflict.
2. No horizontal oscillation: /wind/direction/vs/0's supportedModes
includes Left_And_Right, which _DEVICE_TO_SWING had no mapping for.
Add it to HA's standard 'horizontal' swing constant.
3. No standalone humidity/current-temperature sensors: the climate card
already reads both internally, but nothing exposed them as entities
for history/automations. Add CURRENT_TEMPERATURE (OCF
/temperature/current/0) with a CURRENT_TEMPERATURE_VS vendor fallback
(same match_fn-gated pair shape as common.py's POWER_GENERIC/
POWER_VS_FALLBACK), and a HUMIDITY sensor reading /humidity/vs/0's
fivepercentHumidity field -- the only one of the three
humidity-shaped fields across /humidity/0 and /humidity/vs/0 that
isn't permanently stuck at 0 on every dump seen.
Regenerates the five existing AC goldens (all pick up
current_temperature_c; most pick up humidity) and adds a dedicated
fixture from the issue's WindFree dump, whose /humidity/vs/0 actually
has live fivepercentHumidity data.
NE63B8411SS reports no oneUiVersion and no /information/vs/0 resource at
all, so neither for_device nor for_device_by_model's modelNum tokens have
anything to key off -- it fell through to the unknown-device fallback,
which also mis-binds /temperatures/vs/0 against fridge.py's setpoint
capability (a collision the oven family's own capabilities are normally
excluded from the global registry specifically to avoid).
Add a resources-based signature to for_device_by_resources(): 'Bake' in
/mode/vs/0's supportedModes is oven/range-exclusive vocabulary, and paired
with the /oven/vs/0 cavity resource it reliably identifies this family
even with no model info at all. Route to 'range' when a cooktop-status
resource is also present, else plain 'oven'.
This board's cooktop half also doesn't expose the per-burner
/cooktop/status/vs/0 array range.py already models -- only the coarser
/cooktopmonitoring/vs/0 summary resource. Add a read-only
COOKTOP_MONITORING capability for it (cooktop running state, warming
center state) rather than leaving it unbound.
Since entity.py started routing named descriptors through the catalog
under desc.key, SamsungEntityDescription.name has been read for its
value nowhere -- only twice as a flag, to decide whether an entity was
translated at all. That left 148 English names duplicated between Python
and translations/en.json with nothing keeping them honest: six had
already drifted, invisibly, because editing the Python side changes
nothing a user sees.
So the field is gone, and translation_key defaults to desc.key. A
descriptor now sets translation_key only to share one catalog entry
across descriptors or to point at a differently-named one, and the
catalog is the only place an entity name exists.
Every descriptor resolves to exactly the translation key, icon, entity
category, enabled-default and gating it did before -- with one
deliberate exception: the hood fan, previously the sole descriptor with
no key at all, now resolves to 'fan'. That is inert, because fan.py sets
_attr_name = None so the entity presents as the device itself.
The three helpers that forwarded a name into a descriptor
(laundry.bool_option_switch, washer._bool_option_switch, air_purifier's
sensor table) lose that parameter. test_translations.py now requires a
catalog entry for every descriptor rather than only translated ones.
Claude-Session: https://claude.ai/code/session_01GiibJZZLWVvyxq7mc7EDNp
PR #68 restated its own translation data in Python: a 60-line
TRANSLATED_SELECT_STATES table of frozensets duplicating every
entity.select.*.state key, a second _TRANSLATED_COURSE_TABLES table
naming which course tables have translations, and a strings.json that
was a 835-line byte-for-byte copy of translations/en.json save 43
[%key:...%] references. Each needed hand-syncing, and one was already
drifting.
Home Assistant loads exactly one file per language for a custom
integration -- translations/<lang>.json. It never reads strings.json and
never resolves [%key:...%]; both belong to Core's build tooling, which
custom integrations don't run through (hassfest skips a missing
strings.json and validates translations/en.json instead). So en.json is
the source, and the new catalog.py reads the keys and states back out of
it for the two decisions Python genuinely has to make:
- select._display() normalizes a raw Samsung option to a lowercase
state key only when the catalog knows it, else leaves the vendor's
casing alone. Derived sets are identical to the removed literals.
- laundry.cycle_select() keys off a device-reported course table only
when that table has an entry, else falls back to the name-only
'cycle' key. Translating Table_00 is now a translations-only change.
Also fixes six names that had already drifted between the Python
descriptors and the catalog, restoring HA's sentence case for two
generic ones (Auto release dry, Bubble soak) and taking the catalog's
wording for the rest, and adds a test so the vestigial descriptor names
can't silently disagree with the UI again.
Claude-Session: https://claude.ai/code/session_01GiibJZZLWVvyxq7mc7EDNp
Six fridge SwitchDesc write_fns built their payload with
`'On' if p else 'Off'`. The switch platform passes the literal
string 'Off' on turn-off, which is truthy, so the guard always
produced 'On' -- turning these switches off silently re-sent On
and they could never be turned off:
- ICEMAKER_NIGHTTIME (ice.night.status)
- STATUS_LOCK helper (devicecontrol + device.sound)
- DEFROST_DELAY (delayDefrost)
- WELCOME_LIGHTING (status)
- CABINET_LIGHT dim (light.dimming.status)
- ICEMAKER_STATUS_FALLBACK (iceMaker)
Compare `p == 'On'` instead, matching the pattern the other
capability files already use. Adds a regression test asserting
every affected write_fn sends 'Off' on 'Off' and 'On' on 'On'.
Power users can now pick a resource href from a live dropdown, view its
current value, and POST a minimal patch straight to the device -- to pin
down device-specific write behavior without waiting on a new release.
Bypasses the remote-control block and all write_fn/validate_fn logic by
design; the existing remote-control settings toggle moves behind the same
options-flow menu.
Simplification (feedback: this was overcomplicated): drop the
validated_table gate entirely. cycle_select's table_href now just builds
the translation key directly from whatever course table the device
reports (washer_cycle + Table_02 -> washer_cycle_table_02) instead of
comparing against a hardcoded known-good value and falling back to no key
on any mismatch. A table we haven't shipped translations for yet (e.g.
FlexWash's Table_00) still gets a key built for it -- Home Assistant's own
missing-translation handling takes it from there, the same graceful
fallback already relied on for any individual untranslated code within an
existing table. Adding a newly-confirmed table later is just new
strings.json entries, no code change.
Independent (Opus) review of the prior version caught two real issues,
fixed here regardless of the simplification above:
- translation_key was resolved once at entity construction from whatever
coordinator.last_resources held at that moment. Discovery can run while
a sibling resource is still an empty stub (documented precedent: see
_is_included), so a callable translation_key could permanently bake in
a stale value for the entity's lifetime. Moved resolution into a
translation_key property override (Entity.translation_key is a property
upstream, not a plain attribute), re-evaluated against live coordinator
data on every access, matching how options/current_option already work.
- The supportedOptions fallback's "smallest passing K wins" docstring
claimed every larger passing K is an exact multiple of the true one.
False: the shipped dishwasher fixture has passing K=7 (true) alongside
10, 14, and 35, none of which are multiples of 7 -- position 0 always
lands on the same real course code regardless of K, which alone
satisfies the current-course guard for several unrelated splits.
Corrected the reasoning to what's actually true (an empirically-matched
heuristic across six real dumps, not a proof) and added a regression
test locking in the real dishwasher case so this isn't silently lost.
Course codes on the shared /course/vs/0 contract aren't guaranteed
consistent across board generations: washer/combo devices report course
table Table_02, dryer devices Table_03 (x.com.samsung.da.st.courseTable,
previously fully ignored), and every code in washer_cycle/dryer_cycle was
confirmed exclusively against those. FlexWash's older DA_WM_A51 board
reports Table_00 instead -- applying the same translations there risked
showing a wrong name for any code that happens to numerically collide
between tables, not just an untranslated one.
SelectDesc.translation_key can now be a callable (resources -> key or
None), mirroring the existing pattern for `options`. laundry.cycle_select
gains optional table_href/validated_table params: when given, the renamed
washer_cycle_table_02/dryer_cycle_table_03 keys only apply when the
device's own course table matches exactly -- a different table, or no
table id at all, gets no translation_key (raw code display) rather than
a guess. dishwasher's call site is unchanged (static key, unconditional):
no equivalent table-id resource exists in any dump seen, and no evidence
its course codes vary by table the way washer/dryer's do.
entity.py and select.py resolve a callable translation_key once (via
coordinator.last_resources) and reuse that resolved value everywhere
_display() needs it, rather than re-checking the raw descriptor field.
Some DA_WM_TP1/TP2-class boards populate /wm/editcourse/vs/0 without ever
filling in editCourseList itself (issue #1), so the Cycle select never gets
created even though the device clearly has one (confirmed via SmartThings
app screenshots and a currently-selected course).
/course/vs/0's own x.com.samsung.da.supportedOptions turns out to already
carry the course list, just undocumented: a 1-hex-nibble header followed by
one fixed-width record per course, self-indexed by a course-code first byte
rather than positional like editCourseList. Confirmed against six
independent real-world dumps pulled from open and closed GitHub issues.
cycle_options() now falls back to deriving this when editCourseList is
empty, gated on two checks: the derived codes must all be distinct, and
must include whatever course is currently selected. Larger multiples of
the true record width trivially re-pass both checks too (they're just a
sparser sampling of the same table), so the smallest passing width wins
rather than requiring one unambiguous match.
Also fires on the washer_flexwash fixture, newly creating a Cycle select
there -- unconfirmed against any ground truth for that device (a different,
older board generation with no editCourseList and no screenshots to check
against), flagged for follow-up discussion rather than silently accepted.
Per the five running-state diagnostics dumps (Auto/Sleep/Low/Medium/High)
gathered in the issue thread:
- Blooming_* has no corresponding SmartThings app setting, so it's dropped
entirely rather than kept as an unexplained diagnostic.
- Comode_* reads 'Off' on all five, ruling out the original guess that it
was the fan-speed selector -- still exposed read-only, purpose unconfirmed.
- OptionCode_60282 and the missing humidity sensor are confirmed correct as
already modeled.
- /airflow's speed doesn't map monotonically to the five settings and the
dumps were all captured within one ~30s poll cycle of each other, so it
stays read-only pending a cleaner, time-spaced capture.
FilterProgress is untouched here: an earlier pass on this issue read the
thread as confirming 100 means "fresh" and renamed the sensor to filter_life
to match, but that reading was backwards -- the reporter clarified 100
means fully used and needs replacing, which is what filter_progress (the
already-shipped name) already implies. That rename was caught before
merging and is not part of this change.
New '-CAWW-' modelNum token for multi-indoor-unit commercial AC
installs -- these report no oneUiVersion, same as the other RAC/PRAC
boards. Once routed to the existing airconditioner registry, every
resource in the reporter's dump already binds except one new
SAC-specific installation-topology blob, now ignored.
The remote-control-off write block was device-wide and unconditional:
whenever a device reports remote control off, every write is rejected
with a user-facing error, on the assumption the device would reject it
anyway. Issue #54 reports a washer where that assumption doesn't hold --
default detergent/softener dosing writes through even with remote
control off, since they apply to the built-in programs too, not just a
custom remote-controlled cycle.
Add a per-device options flow (Settings > Devices & Services > this
device > Configure) with a single toggle, stored in entry.options (not
entry.data) so it doesn't affect the device's identity/unique_id.
coordinator.async_send_command reads it ahead of the existing
remote_control_enabled() check; defaults to False everywhere, so devices
that don't touch this option see no change in behavior.
Widening the settle window to tens of seconds (previous commit) made a
real gap much more likely to bite: apply() gated every source,
including 'optimistic', on _is_settling. /course/vs/0 backs several
independent washer selects (cycle, detergent quantity, softener
quantity, ...), so picking a second one while the first write's window
was still open -- routine within a ~43s window -- had its own
optimistic value silently dropped from the cache instead of shown,
recreating the exact "write doesn't seem to apply" symptom the guard
exists to prevent, just for whichever write lost the race.
Let source='optimistic' always bypass the gate; poll/sweep/observe
stay gated as before. mark_write_pending still re-arms the window
right after, so the newer write is protected going forward.
async_send_command's settle guard used DEFAULT_SETTLE_S's fixed few
seconds, which is long enough for fields that update instantly on the
device but not for ones that visibly take a few seconds of internal
validation or hardware movement to catch up. Issue #9's washer packs
cycle/detergent/softener selection into /course/vs/0's shared options[]
array, and that settling time regularly outlasted the fixed window --
same device, same integration, but /washer/vs/0's temperature/spin
fields (plain flags) confirmed instantly while these didn't. The short
window expired before the confirm poll (or the device itself) caught
up, so a stale read landed unprotected and reverted the optimistic
value, only to self-correct again once a later poll saw the real
change -- reading to the user as the write reverting and then
reapplying itself a few seconds later.
Size the window to always outlast the PUT and the confirming refresh's
poll combined, as issues #17/#53 also needed, but without that fix's
early-release mechanism (reverted previously for its own races around
overlapping writes) -- just hold the guard for the full window and let
it expire on its own.
Marc Billow