Two Samsung air purifiers of the same model report the identical, well
formed serialNum `BS7SP9AW400114A` (issue #381). Since the entry's
unique_id, the device registry identifiers and every entity unique_id
were all minted from that string, the second unit was refused as already
configured, and would have collided entity-for-entity even if it hadn't
been.
This is the third firmware family to ship an unusable serialNum, after
`Nothing(SVC)` (#83) and the flash-unset sentinel (#189), and the first
one no heuristic can catch: the value is well formed, it's just shared.
`is_placeholder_serial` was a dead end.
So identity moves onto /oic/d's `di`, falling back to /oic/p's `pi`, then
the serial, then the host. `di` is what the protocol already uses to
address the endpoint -- if it were wrong or shared, OCF discovery and the
DTLS association wouldn't work at all -- and it's device-scoped, where
`pi` is platform-scoped and would be shared by a board hosting several
logical devices. Both units in #381 report a distinct `di`. A board that
answers neither resource lands exactly where it did before, so no
existing hardware regresses.
The re-key can't happen in async_migrate_entry: the UUID is only readable
from the device, and an entry can load entirely from its snapshot while
the appliance is off (#295). So v3 -> v4 only records the legacy key, and
the coordinator adopts the UUID on the first live poll, rewriting the
entity registry, the device registry (including subdevice identifiers)
and the entry's unique_id together. Rewriting rather than recreating is
what lets a user keep entity_ids, names, areas, statistics and every
automation that references them.
Three rules keep that adoption from misfiring:
- A poll that reads no UUID never demotes a UUID-keyed entry back onto
its serial, so one failed reconnect doesn't re-key every entity.
- A changed UUID is followed only when the serial still corroborates it
(a factory reset may regenerate `di`) or when the entry was keyed on
its IP, which was never an identity to defend.
- When the identity is rejected as a different appliance, the serial
isn't adopted either -- otherwise the intruder would gain exactly the
corroboration needed to win the next poll.
Also stop redacting `di`/`pi` from diagnostics. They're randomly assigned
per-unit UUIDs, not account data, and blanking them is what made the
first #381 diagnostics download unable to answer the only question it was
requested to answer. The owner-set device name stays redacted.
Fixes#381
Continues narrowing SamsungEntityDescription accesses to the correct
subclass and asserting Optional write_fn/match_fn/exists_fn fields are
set before calling them, per the pattern established in the previous
commit.
Adds [tool.ruff] and [tool.ty] config to pyproject.toml with a curated
ruff rule set (E, F, W, I, UP, B, C4, SIM, RUF, ASYNC, LOG, G, PIE, RET,
PERF, N), pins ruff/ty in requirements-dev.txt, reformats the whole tree
with `ruff format`, and fixes the pre-existing lint and type-check debt
those tools surfaced so both run clean.
Production-code type fixes include: HA's ConfigFlowResult vs. the
generic FlowResult in config_flow.py, narrowing BoundEntity.desc to its
platform-specific subclass (SelectDesc/NumberDesc/SensorDesc/etc.) via
cast() instead of an unchecked annotation, converting HA device_class
strings to their proper enum types, a resolve_registry callback typed
as `object` instead of `DeviceRegistry | None`, and a couple of other
narrow correctness fixes (CA key type validation, an index-out-of-bounds
false positive from an empty-tuple fallback, a bool/dict argument swap).
Test-file fixes are mechanical: narrowing SamsungEntityDescription to
the correct subclass via isinstance()/cast() before accessing
subclass-only fields, and asserting Optional write_fn/unit_fn fields
are set before calling them.
"Unit"/"sub-unit" from #199's multi-indoor-device support wasn't OCF
idiomatic -- OCF calls each component of a composite device a
"subdevice" (see subdeviceIdList), so rename SubUnit -> Subdevice
throughout: the registry module, coordinator state, BoundEntity's
subdevice field, diagnostics keys (subdevices/subdevices_skipped/
subdevice_probes), entity unique_id prefixes (unit1_/sub_<uuid>_ ->
subdevice1_/subdevice_<uuid>_), device-name fallback labels, golden
fixtures, tests, README, and the adding-device-support skill.
Breaking change to entity unique_ids and diagnostics keys, acceptable
since this hasn't been released yet.
Samsung 2-in-1 air conditioners put more than one logical indoor unit
behind a single IP and a single DTLS session. Only the unit the config
entry was set up against was ever discovered; the second one -- a whole
physical appliance the user can see in SmartThings -- had no entities at
all. Two reporters turned out to have two different mechanisms:
ARTIK051_DONGLE_FAC_18K -- indexed siblings. /oic/res registers the
whole tree discoverable and lists three complete parallel resource
sets whose trailing path segment is the index (/mode/vs/0, /mode/vs/1,
...), on OCF-standard and vendor hrefs alike. /device/0's batch
carries only the index-0 hrefs, so a sibling is reachable only through
its own /device/<n> collection.
TP2X_FAC_BORA_21K -- UUID-prefixed tree. /oic/res hides the appliance
tree entirely (which is why a direct /device/1 probe returns nothing
on this board). /subdevices/vs/0 carries subdeviceIdList instead, and
that UUID appears as a literal href prefix; /<uuid>/information/vs/0
was confirmed live to return the wall unit's own model and serial
(TP2X_FAC_BORA_RAC_21K) against the master's TP2X_FAC_BORA_21K.
The detection signals don't overlap on either board, so no
disambiguation is needed -- enumeration checks both and takes what
answers.
Both patterns are the same thing underneath: a logical unit is a seed
collection path to poll plus an href transform between the canonical
href the registry knows and the actual on-the-wire href. That is the
whole abstraction (SubUnit), applied at four boundaries -- discovery,
the coordinator, the adapter, and the platforms. Capabilities, the
registry and the climate composite stay written against canonical hrefs
and are untouched.
Uniqueness comes from a key_prefix inside the flattened state key, so
the master unit's keys are byte-identical to every release before this
and every existing golden file is an unchanged regression guard. Each
sub-unit gets its own device-registry entry linked by via_device and
named from its own /information/vs/<n>, so it lands in its own room
rather than crowding the master's device page.
A sub-unit materializes only when it yields at least one primary
(non-diagnostic) entity with a populated value. That gate is not
decoration: the reporter's /device/2 is an unused slot that SmartThings
shows disabled, yet it answers with a full 14-href batch, and it
flattens to exactly one non-None value -- a diagnostic alarm_code
derived from an empty /alarms/vs/2. Without the entity-category filter
it becomes a phantom third climate card. The rule is deliberately
domain-agnostic rather than a list of HVAC hrefs, so a multi-drum
washer (#19) gets the same treatment with no new curation. Units that
answer but fail the gate are logged and reported in diagnostics, so a
genuinely missing unit stays diagnosable from a dump.
Enumeration fetches things that must not then be treated as appliance
state. A rejected candidate's seed has to be read to evaluate the gate,
but only units that pass are polled again, and StateCache has no
eviction -- so discovery runs before the first cache apply and those
reps are held aside for diagnostics rather than frozen into the cache
forever. /multidevice/vs/0 is probed on every device regardless of
family, so merging it into the resources dict would have reached
discovery on any board whose registry doesn't ignore that href -- only
the air conditioner one does -- raising a spurious coverage-gap repair
for a washer or fridge whose firmware answers it. It is corroborating
metadata (numofsubdevice, confirmed read-only) and now lives beside the
resources rather than in them.
Diagnostics reports each unit separately: top-level `resources` is this
unit's own and only its own, which is what the module docstring and the
adding-device-support skill have always claimed it was, and each
sibling or rejected candidate carries its own reps canonicalized so a
block reads exactly like the master's instead of needing to be
de-indexed by hand.
Fixtures are real captures. The ARTIK051_DONGLE_FAC_18K one is entirely
verbatim, both sibling seeds and the hand-read /multidevice/vs/0
included. The TP2X_FAC_BORA one has a real device0, oic_res and
sub-unit /information/vs/0, with the remainder of that unit's tree
constructed and documented as such in seeds_note; /<uuid>/device/0 is
the one part of that pattern still inferred rather than observed, and
can't be tested through the debug panel because a Collection returns a
list.
- _speed_zero_is_off now keys off the hood resource's own
settableMinFanSpeed/supportedFanSpeed fields instead of asking whether
the device has any power resource at all, so a combi appliance's cavity
/power/0 can no longer be toggled off by turning off just the vent fan.
- async_turn_on() no longer resets an already-running fan to its lowest
speed when called without a percentage.
- _has_separate_power() reads through the O(1) resource cache instead of
copying the full resource snapshot on every property access.
- _kimchi_mode_write rejects values the compartment didn't advertise in
supportMode instead of writing them blind.
- kimchi_ripening_status no longer lowercases its value, since it has no
enum catalog entry to translate the lowercased token back through.
- Documented why KIMCHI_DOOR_GENERIC isn't deduped against the /doors/vs/0
aggregate fallback on the one fixture that reports both.
Adds regression tests for the combi-appliance power targeting, the
already-on turn_on no-op, kimchi mode write validation, and a kimchi
select display/write casing round-trip; a translation-coverage guard for
kimchi_zone_mode codes mirroring the existing AC preset one.
Combi microwave units report their vent fan on the same resource shape a
standalone range hood uses, so reuse range_hood.HOOD_FAN directly in the
microwave registry. Unlike a standalone hood, this board has no sibling
/power/0 or /power/vs/0 resource, so LocalThingsRangeHoodFan now falls
back to treating fan speed 0 as the off state when no separate power
resource is present. Also gate HOOD_FAN's automatic_operation sensor on
field presence, since this board doesn't report it.
Marc Billow