Add support for Samsung room air conditioners (ARTIK051_PRAC-class), the
first device whose core controls map onto a single Home Assistant `climate`
entity rather than a scatter of switches/selects/numbers.
- New `climate` platform + `ClimateDesc`: one composite entity that reads
power, HVAC mode, current/target temperature, fan (wind) strength, swing
(wind direction) and the convenient-mode preset across several OCF
resources and writes back to each. On/off folds into HVACMode.OFF /
TURN_ON/OFF; convenient mode folds into preset_mode. The entity binds one
primary resource (/mode/vs/0) and reads its siblings from the coordinator
snapshot, reusing the cross-resource read pattern from number/select.
- New `airconditioner` capability module + by_type registry, routed via the
`_PRAC_` modelNum token. Reuses common ALARMS/ENERGY_METER,
fridge.FIRMWARE_UPDATE and dishwasher.DIAGNOSIS; air purify and auto clean
as config switches; air dust filter status/usage as diagnostics (usage
normalized to a percentage of rated capacity).
- Climate-consumed and all-zero/ambiguous resources (temperature/wind,
/sensors, /humidity) are declared as AC-scoped coverage so every href in
the dump binds or is covered -- no coverage-gap repair.
- Fan/swing modes map onto HA standard constants (auto-localized); the
custom fan `turbo`, presets `quiet/smart/speed`, and the filter-status
enum get translations in strings.json + translations/en.json.
- Scrubbed fixture, golden, and tests: registry routing, zero unbound
hrefs, the climate write contract, and filter-% normalization.
First full dryer dump (issue #14, DV90BB5245AES1) surfaced 5 unbound
hrefs and an "incomplete capability coverage" repair. Handle them and,
while here, make the washer/dryer/dishwasher families consistent instead
of each carrying a bespoke variant of the same controls.
Dryer coverage:
- /power/0, /kidslock/0, /remotectrl/0: bind via the OCF-native + vendor
fallback pairs (prefer the standard OCF resource, fall back to -vs).
- /buzzersound/vs/0: new Buzzer sound select.
- /course/vs/0: cycle select shared with washer/dishwasher; ignore the
/st/dryercourse/vs/0 re-encoding (mirror of /st/washercourse/vs/0).
Consistency / de-duplication:
- Move generic OCF controls (power/kids-lock/remote-control fallback
pairs, energy meter) into common.py; every registry uses them.
- Move shared laundry controls (buzzer, job-beginning-status, and the
/course/vs/0 cycle-select machinery) into laundry.py; washer and
dishwasher stop hand-rolling their own copies.
- Energy meter is now sentinel-aware everywhere: the dead '-500'
instantaneousPower reading no longer shows a misleading 0 W (fixes it
on dryers and dishwashers, matching the earlier washer fix).
- Job-beginning-status reads x.com.samsung.da.currentStatus, the field
every dump actually carries; the dryer sensor was previously blank.
Adds a scrubbed dryer fixture, golden, and capability tests, plus an
.claude/skills/adding-device-support skill capturing the dump-reading,
OCF-vs-vendor, entity-taxonomy, and coverage workflow. Bumps to 0.6.0.
progress_percentage lacked the active-state gate already applied to
progress/cycle_active/finish_time, so it kept showing a stale device value
(e.g. 1%) while idle -- now zeroed the same way. Shared by dryer/dishwasher/
oven via operational.py's OPERATIONAL_STATE.
Also exposes detergent/softener auto-dispense quantity, water hardness/
concentration, and low-reservoir alarms from /course/vs/0's options array,
using the same decode/RMW helpers already used for course selection and
drum-clean tracking. Gated by exists_fn so washer models without these
fields (e.g. the existing test fixture) are unaffected.
Water consumption is unaffected -- common.WATER_METER is already wired
into the washer registry; this reporter's device just doesn't expose
/water/consumption/vs/0.
Washer (#6): instantaneousPower is a dead sentinel ('-500') on every
TP1-class washer dump collected so far, and cumulativePower is absent
outright on at least one model. WASHER_ENERGY_METER now hides both
sensors instead of showing a misleading "0 W"/perpetual "unavailable".
Fridge (#7): temperature sensors/setpoints hardcoded '°F', ignoring the
unit each device actually reports per-reading -- fixed via a new
unit_fn hook read live from the resource. Also corrects
DEFROST_BLOCK_STATUS's polarity (DEFROST_BLOCK_ON means actively
defrosting, not "blocked", confirmed against live dumps) and adds
REFRIGERATION_FALLBACK for /refrigeration/0, closing the last unbound
href surfaced by issue #7's diagnostic dump.
Oven: applies the same live-unit-reading fix defensively to
OVEN_SETPOINT, which shares the same aggregate resource shape.
Adds cycles-until-due and last-cleaned sensors decoded from the same
options[] array the course selector already reads (DrumCleanProposal_N -
WashingTimes_N for cycles remaining, DrumCleanLog_<iso> for last-cleaned),
verified byte-for-byte against a live app screenshot ("Potreba cistenia po
37 cykloch" / "Naposledy cistene pred 10 dnami").
x.com.samsung.da.delayStartTime is HH:MM:SS until the cycle starts
(e.g. "01:00" means 1 hour from pressing start), not a time of day. It
was wired up as a time entity with a suspicious hour % 24 wrap -- a
sign it was never really a clock time. Replace with a number entity
(0-24h, 1h steps) that reads/writes the field as elapsed hours.
Maps the fridge/dishwasher hrefs flagged by last session's coverage-gap
Repairs issue: defrost delay (switch) + block status (diagnostic binary
sensor), master ice-maker enable, self-check trigger/status, dishwasher
diagnosis trigger/status, and last-operation-source. Adds fallback
capabilities for /doors, /temperatures, and /icemaker/status that only
bind when the richer per-instance hrefs they duplicate are absent, so
simpler devices without those hrefs still get the data. Everything else
in the original gap list moves to capabilities.ignored (Bixby audio
feedback, inert DR/energy-planner resources, redundant metadata).
Fixes discover() reporting a known href as an unregistered gap whenever
its match_fn declined to bind for that device (e.g. a filter capability
on hardware without that filter) — it's now only a gap when no capability
is registered for the href at all.
Device naming now uses x.com.samsung.da.modelNum (not the OCF /oic/p,d
metadata, which produced inconsistent names like "[dishwasher] Samsung")
to build "Samsung <Type> (<model>)".
Companion to the git-filter-repo pass that just stripped every prior
version of these two files (which carried a real Samsung account email,
Bixby access token/device-ID hash, and real WiFi/BLE MAC addresses) out of
history entirely. This commit reintroduces only the already-redacted
content, so the real values are no longer reachable from any commit.
Dishwasher:
- Revert remote_control to BinarySensorDesc ("Smart Control", read-only)
- Add cycle SelectDesc on /course/vs/0 via options-array RMW (AI Wash,
Pre blast, Self clean, Normal, Express 60, Heavy, Pots and pans,
Delicate, Plastic, Baby Care)
- Add Storm Wash+ and Auto release dry SwitchDescs on /course/vs/0
- Add Sanitize SwitchDesc and Smart Dry SelectDesc on /dishwasher/vs/0
- Add Sound volume NumberDesc (0–15 step 5) on /settings/sound/volume/vs/0
- Add Door LED night brightness, night start/end time to DOOR_LED capability
- Add SOUND_VOLUME capability to laundry module
Stale-state fixes (firmware leaves values set after cycle ends):
- finish_time: suppress when machine state is not active
- progress: return 'Idle' when machine state is not active
- water filter: gate WATER_FILTER capability on filterStatus != 'notused'
Translations:
- Add ICESTATUS_RUN → "Making ice" to strings.json and en.json
Tests:
- Update dishwasher and refrigerator golden fixtures to reflect current entity set
- Remove dead test_project_extrapolates_remaining_time (on_observation removed)
Remove key_fn from Capability — pattern cap keys are now always derived
automatically: strip digits from href segments, join with '_', append
'_' + desc.key. /door/cooler/0 + 'open' -> door_cooler_open.
DOOR_GENERIC entity key: 'open' (not 'door_open'). Remove _door_key helper.
Fridge registry: DOOR_FRIDGE/DOOR_FREEZER replaced by DOOR_GENERIC pattern cap.
Golden baseline: door_fridge_open -> door_cooler_open.
Move device dumps to tests/fixtures/dumps/ (tracked) so tests run in CI
without local-tools/ dependencies.
conftest: _resources_from_dump() prefers /device/0 batch reps; falls
back to flat resources dict. Fixes _parse_device0_batch to include
stub reps (rep={href:...}) as {} so capabilities still bind on
resources with no current data (e.g. /alarms/vs/0 when no alarm active).
test_golden_regression: _new_state_and_uids now uses by_type.for_device
to select per-device-type capabilities + pattern caps.
OVEN_SETPOINT (/temperatures/vs/0) and OVEN_MODE (/mode/vs/0) collide
with fridge hrefs. Remove from ALL; only OVEN_CAVITY (/oven/vs/0) is
oven-unique. Per-device-type registries (v2 plan) will restore them in
the oven-only registry.
Also updates golden baselines to include legitimate new entities added
since original capture (cycle_active, firmware_update, power_switch for
dishwasher; cabinet_light_switch, ice1 for refrigerator).
Generates regression oracle from DISHWASHER and REFRIGERATOR descriptors:
- tests/fixtures/golden/dishwasher.json: 21 state keys, 23 discovery entities
- tests/fixtures/golden/refrigerator.json: 26 state keys, 24 discovery entities
- tests/test_golden_regression.py: parametrized test that will turn green as
Tasks 9-12 port capabilities into the new registry
Marc Billow