Complete dryer coverage from issue #14 screenshots (DV90BB5245AES1)

Name the two remaining unidentified course codes (0x21 Hygiene Care,
0x4C Air Refresh) by matching the SmartThings app's course-list order
against editCourseList in the reporter's dump.

Also close three entity gaps the screenshots surfaced that v0.6.0
missed: dry level was read-only despite the app exposing a writable
Level 1/2/3 picker; the app's "AI pattern" toggle (AiOption_On/Off)
and "Auto cycle link" toggle (/cycleinterface/vs/0, previously
globally ignored as always-empty on washer dumps) were both unbound.
Scope that ignore to washer.py now that the dryer binds it for real.

custom_components/localthings/registry/by_type/dryer.py

@@ -26,5 +26,6 @@ REGISTRY = DeviceRegistry(
         dryer.DRYER_SETTINGS,
         dryer.DRYER_COURSE,
         dryer.DRYER_DIAGNOSIS,
+        dryer.AUTO_CYCLE_LINK,
     ]),
 )

custom_components/localthings/registry/by_type/washer.py

@@ -15,5 +15,6 @@ REGISTRY = DeviceRegistry(
         common.WATER_METER,
         operational.OPERATIONAL_STATE,
         dishwasher.DIAGNOSIS,
+        washer.CYCLE_INTERFACE_IGNORED,
     ]),
 )

custom_components/localthings/registry/capabilities/dryer.py

@@ -4,13 +4,15 @@ Dryer-specific controls only. The shared laundry surface -- power/kids-lock/
 remote-control fallback pairs, buzzer, energy meter, job-beginning-status, and
 the /course/vs/0 cycle select -- lives in laundry.py.
 
-  /washer/vs/0   -> DRYER_SETTINGS (dryLevel, dryTime, dryerType, wrinklePrevent)
+  /washer/vs/0        -> DRYER_SETTINGS (dryLevel, dryTime, dryerType, wrinklePrevent)
-  /course/vs/0   -> DRYER_COURSE (shared cycle select; see below)
+  /course/vs/0        -> DRYER_COURSE (shared cycle select, plus the AI-pattern
-  /diagnosis/vs/0 -> DRYER_DIAGNOSIS
+                          toggle read off the same options[] array; see below)
+  /diagnosis/vs/0     -> DRYER_DIAGNOSIS
+  /cycleinterface/vs/0 -> AUTO_CYCLE_LINK
 """
 from ..capability import Capability
-from ..entities import SensorDesc, SwitchDesc
+from ..entities import SelectDesc, SensorDesc, SwitchDesc
-from .laundry import cycle_select
+from .laundry import bool_option_switch, cycle_select
 
 
 def _wrinkle_write(p, rep, href=None):
@@ -23,8 +25,15 @@ DRYER_SETTINGS = Capability(
     href='/washer/vs/0',
     poll_tier='warm',
     entities=(
-        SensorDesc(key='dry_level', field='x.com.samsung.da.dryLevel',
+        # supportedDryLevel values (e.g. 'None'/'Less'/'Normal'/'More') are
-                   name='Dry level', icon='mdi:water-percent'),
+        # already human-readable on this device, unlike the combo-unit
+        # numeric-minute codes washer.py's washer_dry_level select needs
+        # translations for -- no translation_key needed here.
+        SelectDesc(key='dry_level', field='x.com.samsung.da.dryLevel',
+                   name='Dry level', icon='mdi:water-percent',
+                   options_field='x.com.samsung.da.supportedDryLevel',
+                   write_fn=lambda p, rep, href=None: (
+                       ['washer', 'vs', '0'], {'x.com.samsung.da.dryLevel': p})),
         SensorDesc(key='dry_time', field='x.com.samsung.da.dryTime',
                    name='Dry time', icon='mdi:timer'),
         SensorDesc(key='dryer_type', field='x.com.samsung.da.dryerType',
@@ -40,15 +49,21 @@ DRYER_SETTINGS = Capability(
 # laundry.cycle_select (options read live from /wm/editcourse/vs/0, written as
 # an RMW on the options array). Course display names live in translations
 # under entity.select.dryer_cycle (Table_03, DV5000-class, captured
-# 2026-05-29). Codes 0x21 and 0x4C appear in the issue #14 DV90BB5245AES1
+# 2026-05-29; codes 0x21/0x4C named from the issue #14 DV90BB5245AES1
-# editCourseList but aren't identified yet -- they render as the raw code
+# SmartThings course-list screenshots on 2026-07-24). The /st/dryercourse/vs/0
-# until named. The /st/dryercourse/vs/0 resource re-encodes the same selected
+# resource re-encodes the same selected course and is ignored (ignored.py) --
-# course and is ignored (ignored.py) -- the mirror of how /st/washercourse/vs/0
+# the mirror of how /st/washercourse/vs/0 is ignored for washers.
-# is ignored for washers.
+#
+# The same options[] array also carries AiOption_On/Off -- the app's "AI
+# pattern" toggle ("Get cycle recommendations based on your usage patterns"),
+# confirmed against the issue #14 screenshots. Same On/Off token shape as
+# washer.py's bubble-soak/pre-wash/intensive toggles; not previously bound.
 DRYER_COURSE = Capability(
     href='/course/vs/0',
     entities=(
         cycle_select(translation_key='dryer_cycle', icon='mdi:tumble-dryer'),
+        bool_option_switch('ai_pattern', 'AI pattern', 'mdi:creation', 'AiOption',
+                            entity_category='config', gate_on_presence=True),
     ),
 )
 
@@ -60,3 +75,26 @@ DRYER_DIAGNOSIS = Capability(
                    name='Diagnosis', entity_category='diagnostic'),
     ),
 )
+
+# /cycleinterface/vs/0 -- the app's "Auto cycle link" toggle ("automatically
+# set to the best drying cycle by communicating with the washer cycle"; both
+# devices must stay connected). Empty ({}) on every washer dump seen so far,
+# which is why it used to sit in the global ignored.IGNORED list -- the
+# issue #14 dryer dump is the first to populate it. washer.py scopes its own
+# ignore locally now (washer.CYCLE_INTERFACE_IGNORED) to avoid a collision.
+def _auto_cycle_link_write(p, rep, href=None):
+    if p not in ('On', 'Off'):
+        return None
+    return ['cycleinterface', 'vs', '0'], {'x.com.samsung.da.cycleInterfaceEnabled': p}
+
+
+AUTO_CYCLE_LINK = Capability(
+    href='/cycleinterface/vs/0',
+    entities=(
+        SwitchDesc(key='auto_cycle_link', field='x.com.samsung.da.cycleInterfaceEnabled',
+                   name='Auto cycle link', icon='mdi:link-variant',
+                   entity_category='config',
+                   value_fn=lambda v: v == 'On',
+                   write_fn=_auto_cycle_link_write),
+    ),
+)

custom_components/localthings/registry/capabilities/ignored.py

@@ -117,11 +117,15 @@ IGNORED: list[Capability] = [
     # data -- common.ENERGY_METER on /energy/consumption/vs/0 is the only
     # real source for this control.
     Capability(href='/energy/consumption/0'),
-    # Empty ({}) on every washer dump seen so far -- nothing to expose.
-    Capability(href='/cycleinterface/vs/0'),
     # OCF-native duplicate of /drlc/vs/0 above -- same utility-program
     # dependency this integration doesn't support locally.
     Capability(href='/drlc/0'),
+    # NOTE: /cycleinterface/vs/0 used to be listed here as empty ({}) on
+    # every washer dump seen so far. The issue #14 dryer dump populates it
+    # (cycleInterfaceEnabled) as the app's "Auto cycle link" toggle, so it's
+    # now a real capability there (dryer.AUTO_CYCLE_LINK) -- washer.py scopes
+    # its own ignore locally (washer.CYCLE_INTERFACE_IGNORED) to avoid a
+    # global-ignore/real-capability href collision.
     # OCF-native duplicate of /operational/state/vs/0, which is already
     # modeled by operational.OPERATIONAL_STATE (a richer, write-capable
     # capability with start/pause/stop buttons and a delay-start control)

custom_components/localthings/registry/capabilities/washer.py

@@ -354,3 +354,10 @@ WASHER_COURSE = Capability(
                              'IntensiveSetting', 'IntensiveAvailableSet'),
     ),
 )
+
+# /cycleinterface/vs/0 -- washer-to-dryer "Auto cycle link" pairing signal
+# (dryer.AUTO_CYCLE_LINK). Empty ({}) on every washer/combo dump seen so far
+# (plain washers, FlexWash, and washer/dryer combos alike), so it's scoped
+# out here rather than left in the global ignored.IGNORED list, which would
+# collide with the real dryer-side capability.
+CYCLE_INTERFACE_IGNORED = Capability(href='/cycleinterface/vs/0')

custom_components/localthings/strings.json

@@ -115,10 +115,12 @@
           "1e": "Outdoor",
           "1f": "Mixed Load",
           "20": "Iron Dry",
+          "21": "Hygiene Care",
           "23": "Quick Dry 35",
           "24": "Cool Air",
           "25": "Warm Air",
-          "27": "Time Dry"
+          "27": "Time Dry",
+          "4c": "Air Refresh"
         }
       },
       "washer_dosing_quantity": {

custom_components/localthings/translations/en.json

@@ -115,10 +115,12 @@
           "1e": "Outdoor",
           "1f": "Mixed Load",
           "20": "Iron Dry",
+          "21": "Hygiene Care",
           "23": "Quick Dry 35",
           "24": "Cool Air",
           "25": "Warm Air",
-          "27": "Time Dry"
+          "27": "Time Dry",
+          "4c": "Air Refresh"
         }
       },
       "washer_dosing_quantity": {

tests/fixtures/golden/dryer.json

@@ -1,6 +1,8 @@
 {
   "state_keys": [
+    "ai_pattern",
     "alarm_code",
+    "auto_cycle_link",
     "buzzer_sound",
     "child_lock",
     "cycle",

tests/test_dryer_capabilities.py

@@ -39,10 +39,46 @@ def test_no_unbound_hrefs():
 def test_expected_entities_present():
     state = _state()
     for key in ('buzzer_sound', 'cycle', 'power_switch', 'child_lock',
-                'remote_control', 'dry_level', 'wrinkle_prevent', 'energy_kwh'):
+                'remote_control', 'dry_level', 'wrinkle_prevent', 'energy_kwh',
+                'ai_pattern', 'auto_cycle_link'):
         assert key in state, key
 
 
+def test_dry_level_is_a_writable_select():
+    """dryLevel used to be a read-only sensor, but the app's "Dryness"
+    control (issue #14 screenshots) is a Level 1/2/3 picker, and the dump's
+    supportedDryLevel list confirms the device accepts writes -- it should
+    be a select, not a sensor."""
+    desc = next(e for e in dryer.DRYER_SETTINGS.entities if e.key == 'dry_level')
+    assert desc.options_field == 'x.com.samsung.da.supportedDryLevel'
+    assert desc.write_fn is not None
+    assert desc.write_fn('Less', {}) == (
+        ['washer', 'vs', '0'], {'x.com.samsung.da.dryLevel': 'Less'})
+    assert _state()['dry_level'] == 'Normal'
+
+
+def test_ai_pattern_reads_and_writes_options_token():
+    """AiOption_On/Off on /course/vs/0's options[] array is the app's "AI
+    pattern" toggle (issue #14 screenshot: on)."""
+    assert _state()['ai_pattern'] is True
+    desc = next(e for e in dryer.DRYER_COURSE.entities if e.key == 'ai_pattern')
+    opts = ['Course_16', 'AiOption_On']
+    href, payload = desc.write_fn('Off', {'x.com.samsung.da.options': opts})
+    assert href == ['course', 'vs', '0']
+    assert 'AiOption_Off' in payload['x.com.samsung.da.options']
+
+
+def test_auto_cycle_link_bound_to_cycleinterface():
+    """cycleInterfaceEnabled on /cycleinterface/vs/0 is the app's "Auto cycle
+    link" toggle (issue #14 screenshot: off) -- previously globally ignored
+    as always-empty until this dump showed it populated on a dryer."""
+    assert dryer.AUTO_CYCLE_LINK.href == '/cycleinterface/vs/0'
+    assert _state()['auto_cycle_link'] is False
+    desc = next(e for e in dryer.AUTO_CYCLE_LINK.entities if e.key == 'auto_cycle_link')
+    assert desc.write_fn('On', {}) == (
+        ['cycleinterface', 'vs', '0'], {'x.com.samsung.da.cycleInterfaceEnabled': 'On'})
+
+
 def test_job_beginning_status_reads_current_status():
     """The dump carries x.com.samsung.da.currentStatus (not the old
     jobBeginingStatus field the dryer descriptor used to read), so the sensor

tests/test_registry_ignored.py

@@ -68,8 +68,18 @@ class TestWasherIgnoredHrefs:
             '/wm/welcomemsg/vs/0',
             '/wm/personalcourse/vs/0',
             '/energy/consumption/0',
-            '/cycleinterface/vs/0',
             '/drlc/0',
             '/operational/state/0',
         ):
             assert href in ignored_hrefs, f"{href} should be in ignored.IGNORED"
+
+    def test_cycleinterface_is_scoped_to_washer_registry(self):
+        """/cycleinterface/vs/0 is empty on every washer dump but real on the
+        dryer (issue #14's AUTO_CYCLE_LINK), so it's a washer-scoped ignore
+        (washer.CYCLE_INTERFACE_IGNORED) rather than a global one -- a global
+        entry would collide with the dryer's real capability."""
+        from custom_components.localthings.registry.by_type import washer as washer_registry
+        from custom_components.localthings.registry.capabilities.ignored import IGNORED
+
+        assert '/cycleinterface/vs/0' not in {cap.href for cap in IGNORED}
+        assert '/cycleinterface/vs/0' in washer_registry.REGISTRY.capabilities