AC: quantize subdevice temperature writes against their own step (Opus review)
async_send_command handed write_fn/validate_fn the raw cache snapshot (real, on-the-wire hrefs), not a subdevice-scoped view. Every other consumer of a full resources dict (exists_fn, rep_fn, is_legacy_board, ...) reads through coordinator.canonical_resources() specifically to avoid this; write_fn/validate_fn didn't, so on a composite AC (issue #177) _temperature_step's resources.get(HREF_TEMP_CONTROL) saw the master's /temperature/control/vs/0 instead of the subdevice's own /temperature/control/vs/1, silently rounding a subdevice's 0.5-degree write to a whole degree. The remote-control gate stays on the raw snapshot -- /remotectrl/* is a shared, MAIN-only resource a subdevice's owned-hrefs-only canonical view would drop entirely. climate.py's target_temperature_step duplicated this same read-in-order logic; pointed it at airconditioner._temperature_step so the read and write paths can't drift again. Also, from the same review: - _quantize_temperature rejects non-finite floats (nan/inf survive float() but raise out of round()/division, escaping write_fn's documented None-on-bad-payload contract). - Deduplicated the quantize-and-check block shared by the temperature_ocf/temperature branches of _climate_write. - Added the /temperatures/vs/0 items[]-fallback test that was previously unreachable (every increment-carrying fixture also has /temperature/control/vs/0, which _temperature_step checks first). - Added a coordinator-level test seeding an indexed subdevice with its own step, distinct from the master's, covering the fix above. - The Towels/Bedding regression test now checks all 7 locale catalogs, not just English -- the bug is a code-mapping error, and test_every_language_mirrors_the_english_catalog only checks key topology, not values.
This commit is contained in:
@@ -58,9 +58,6 @@ from .registry.capabilities.airconditioner import (
|
||||
from .registry.capabilities.airconditioner import (
|
||||
HREF_POWER_VS as POWER_VS_HREF,
|
||||
)
|
||||
from .registry.capabilities.airconditioner import (
|
||||
HREF_TEMP_CONTROL as TEMP_CONTROL_HREF,
|
||||
)
|
||||
from .registry.capabilities.airconditioner import (
|
||||
HREF_TEMP_CURRENT as TEMP_CURRENT_HREF,
|
||||
)
|
||||
@@ -80,6 +77,7 @@ from .registry.capabilities.airconditioner import (
|
||||
HREF_WIND_STRENGTH as WIND_STRENGTH_HREF,
|
||||
)
|
||||
from .registry.capabilities.airconditioner import (
|
||||
_temperature_step,
|
||||
extend_option_code_bit,
|
||||
has_extend_option_code,
|
||||
has_option_code,
|
||||
@@ -558,12 +556,11 @@ class LocalThingsClimate(LocalThingsEntity, ClimateEntity):
|
||||
|
||||
@property
|
||||
def target_temperature_step(self) -> float:
|
||||
return (
|
||||
_num(self._rep(TEMP_CONTROL_HREF).get("increment"))
|
||||
or _num(self._rep(TEMP_CONTROL_HREF).get("x.com.samsung.da.increment"))
|
||||
or _num(self._temps_vs().get("x.com.samsung.da.increment"))
|
||||
or 1.0
|
||||
)
|
||||
# Shared with the write path (airconditioner._climate_write) so a
|
||||
# step read here always matches the step a write is quantized to --
|
||||
# self._resources is this entity's own subdevice's canonical view
|
||||
# (issue #177), the same shape _temperature_step expects.
|
||||
return _temperature_step(self._resources) or 1.0
|
||||
|
||||
# -- hvac mode ----------------------------------------------------------
|
||||
|
||||
|
||||
@@ -1186,17 +1186,28 @@ class LocalThingsCoordinator(DataUpdateCoordinator[dict[str, Any]]):
|
||||
return
|
||||
href = bound_entity.href
|
||||
rep = self._cache.get(href or "") or {}
|
||||
resources = self._cache.snapshot()
|
||||
# The remote-control gate below keys off the raw on-the-wire href
|
||||
# and a raw snapshot -- /remotectrl/* is a shared, MAIN-only
|
||||
# resource that a subdevice's canonical_resources() view (owned
|
||||
# hrefs only) would drop entirely. write_fn/validate_fn, by
|
||||
# contrast, are written against canonical hrefs (same convention as
|
||||
# exists_fn/rep_fn -- see entity.py's _resources), so they get this
|
||||
# entity's own subdevice view instead of the raw snapshot: without
|
||||
# it, a composite device's write_fn reading resources.get(some
|
||||
# canonical href) (e.g. airconditioner._temperature_step) would
|
||||
# silently see the master's resource instead of its own subdevice's.
|
||||
raw_resources = self._cache.snapshot()
|
||||
bypass_remote_control = self._entry.options.get(CONF_BYPASS_REMOTE_CONTROL, False)
|
||||
if (
|
||||
not bypass_remote_control
|
||||
and remote_control_required_for_write(resources, href or "")
|
||||
and not remote_control_enabled(resources)
|
||||
and remote_control_required_for_write(raw_resources, href or "")
|
||||
and not remote_control_enabled(raw_resources)
|
||||
):
|
||||
raise ServiceValidationError(
|
||||
translation_domain=DOMAIN,
|
||||
translation_key="remote_control_disabled",
|
||||
)
|
||||
resources = self.canonical_resources(bound_entity.subdevice)
|
||||
validate_fn = getattr(desc, "validate_fn", None)
|
||||
if validate_fn is not None:
|
||||
error = validate_fn(payload, rep, resources)
|
||||
|
||||
@@ -9,6 +9,7 @@ here off the coordinator snapshot. These caps stay out of the global
|
||||
capabilities/__init__.py) -- AC-only, by_type registry only.
|
||||
"""
|
||||
|
||||
import math
|
||||
from dataclasses import replace
|
||||
|
||||
from ..capability import Capability
|
||||
@@ -510,6 +511,13 @@ def _quantize_temperature(value, step):
|
||||
numeric = float(value)
|
||||
except (TypeError, ValueError):
|
||||
return None
|
||||
if not math.isfinite(numeric):
|
||||
# float('nan')/float('inf') pass the try/except above (they're
|
||||
# valid floats) but round()/division on them raises ValueError/
|
||||
# OverflowError instead of returning -- reject here so a bad
|
||||
# payload always comes back as a clean None, not an exception
|
||||
# out of write_fn.
|
||||
return None
|
||||
step_value = _num(step) or 1.0
|
||||
if step_value <= 0:
|
||||
step_value = 1.0
|
||||
@@ -558,16 +566,13 @@ def _climate_write(payload, rep, href=None, resources=None):
|
||||
return (["power", "vs", "0"], {"x.com.samsung.da.power": "On" if value else "Off"})
|
||||
if kind == "mode":
|
||||
return (["mode", "vs", "0"], {"x.com.samsung.da.modes": [value]})
|
||||
if kind == "temperature_ocf":
|
||||
if kind in ("temperature_ocf", "temperature"):
|
||||
quantized = _quantize_temperature(value, _temperature_step(resources))
|
||||
if quantized is None:
|
||||
return None
|
||||
return (["temperature", "desired", "0"], {"temperature": quantized})
|
||||
if kind == "temperature":
|
||||
if kind == "temperature_ocf":
|
||||
return (["temperature", "desired", "0"], {"temperature": quantized})
|
||||
# Vendor items[] array; only one item observed on every AC dump, id '0'.
|
||||
quantized = _quantize_temperature(value, _temperature_step(resources))
|
||||
if quantized is None:
|
||||
return None
|
||||
return (
|
||||
["temperatures", "vs", "0"],
|
||||
{
|
||||
|
||||
@@ -181,6 +181,26 @@ def test_climate_write_preserves_half_degree_temperature_steps():
|
||||
)
|
||||
|
||||
|
||||
def test_temperature_step_falls_back_to_temps_vs_items_when_no_control_resource():
|
||||
"""Isolates the /temperatures/vs/0 fallback: every fixture that carries
|
||||
an increment there also carries /temperature/control/vs/0, which
|
||||
_temperature_step checks first -- so without dropping that resource,
|
||||
this fallback branch is never actually exercised, and reinstating the
|
||||
original bug (reading the increment off /temperatures/vs/0's top level
|
||||
instead of unwrapping its items[0]) would still pass every other test."""
|
||||
resources = dict(_load_device("airconditioner_cac"))
|
||||
del resources[airconditioner.HREF_TEMP_CONTROL]
|
||||
assert airconditioner._temperature_step(resources) == 0.5
|
||||
assert airconditioner._climate_write(("temperature", 24.5), {}, None, resources) == (
|
||||
["temperatures", "vs", "0"],
|
||||
{
|
||||
"x.com.samsung.da.items": [
|
||||
{"x.com.samsung.da.id": "0", "x.com.samsung.da.desired": "24.5"}
|
||||
]
|
||||
},
|
||||
)
|
||||
|
||||
|
||||
def test_climate_write_rounds_to_whole_degree_with_no_advertised_increment():
|
||||
"""ARTIK051 boards have neither /temperature/control/vs/0 nor an
|
||||
increment field on /temperatures/vs/0's item -- target_temperature_step
|
||||
|
||||
@@ -201,3 +201,33 @@ async def test_main_climate_write_unaffected_by_subdevice_translation(coordinato
|
||||
|
||||
posted_path, _ = coordinator._session.post_calls[0]
|
||||
assert posted_path == ["power", "vs", "0"]
|
||||
|
||||
|
||||
async def test_indexed_subdevice_climate_write_quantizes_with_its_own_temperature_step(
|
||||
coordinator,
|
||||
) -> None:
|
||||
"""A composite AC's write_fn (airconditioner._climate_write) reads the
|
||||
temperature step off write_fn's own `resources` argument -- if
|
||||
async_send_command handed it the raw cache snapshot (real, on-the-wire
|
||||
hrefs) instead of this subdevice's canonical_resources() view, the
|
||||
subdevice's own /temperature/control/vs/1 would be invisible under the
|
||||
canonical HREF_TEMP_CONTROL key, and the write would quantize against
|
||||
the master's step (or none at all) instead of its own."""
|
||||
sub1 = Subdevice(kind="indexed", key="1", seed_path=("device", "1"))
|
||||
coordinator._observe.apply(
|
||||
"/temperature/control/vs/0",
|
||||
{"x.com.samsung.da.increment": "1"},
|
||||
source="poll",
|
||||
)
|
||||
coordinator._observe.apply(
|
||||
"/temperature/control/vs/1",
|
||||
{"x.com.samsung.da.increment": "0.5"},
|
||||
source="poll",
|
||||
)
|
||||
bound = _climate_bound("/mode/vs/1", sub1)
|
||||
|
||||
await coordinator.async_send_command(bound, ("temperature_ocf", 24.5))
|
||||
|
||||
posted_path, posted_bytes = coordinator._session.post_calls[0]
|
||||
assert posted_path == ["temperature", "desired", "1"]
|
||||
assert cbor2.loads(posted_bytes) == {"temperature": 24.5}
|
||||
|
||||
@@ -164,15 +164,23 @@ def test_confirmed_washer_table_02_towels_bedding_are_not_swapped():
|
||||
"""Issue #343: DA_WM_TP1_21_COMMON's Table_02 had 24/33 transposed --
|
||||
selecting 'Towels' in HA ran the washer's Bedding cycle and vice versa.
|
||||
24 must agree with the 69/6A-79/88 family's own Bedding/Towels pair
|
||||
(6f/70), not with each other."""
|
||||
states = _load("en")["entity"]["select"]["washer_cycle_table_02"]["state"]
|
||||
assert states["24"] == states["6f"] == "Bedding"
|
||||
assert states["33"] == states["70"] == "Towels"
|
||||
(6f/70), not with each other.
|
||||
|
||||
Checked in every locale catalog, not just English: the underlying bug
|
||||
is a device-code mapping error, not a wording issue, and
|
||||
test_every_language_mirrors_the_english_catalog only checks key
|
||||
topology -- a locale-specific 24/33 swap (the exact shape of #343)
|
||||
would still pass that test."""
|
||||
for language in _languages():
|
||||
states = _load(language)["entity"]["select"]["washer_cycle_table_02"]["state"]
|
||||
assert states["24"] == states["6f"], language
|
||||
assert states["33"] == states["70"], language
|
||||
|
||||
|
||||
def test_confirmed_washer_table_02_missing_course_names():
|
||||
"""Issue #342: 06/08/a0 had no translation and fell back to the raw
|
||||
device code in the UI."""
|
||||
device code in the UI; 74 was already translated by the time this
|
||||
landed and is pinned here only as a "didn't regress" anchor."""
|
||||
states = _load("en")["entity"]["select"]["washer_cycle_table_02"]["state"]
|
||||
assert {code: states[code] for code in ("06", "08", "74", "a0")} == {
|
||||
"06": "XXL Laundry",
|
||||
|
||||
Reference in New Issue
Block a user