Merge remote-tracking branch 'origin/main' into claude/device-support-issue-56-shy2vg

# Conflicts:
#	tests/test_golden_regression.py
This commit is contained in:
Marc Billow
2026-07-23 23:47:42 +00:00
8 changed files with 392 additions and 19 deletions
@@ -127,6 +127,11 @@ def for_device_by_model(model_num: str, description: str) -> Optional[DeviceRegi
# and don't match the washer/dryer/dishwasher consumer-prefix map either.
if key is None and '-RANGE-' in (model_num or '').upper():
key = 'range'
# Wall ovens (e.g. TP1X_DA-KS-OVEN-0107X, issue #55) -- same board-family
# naming as the range combo above, minus the burners; also reports no
# oneUiVersion and doesn't match the washer/dryer/dishwasher prefix map.
if key is None and '-OVEN-' in (model_num or '').upper():
key = 'oven'
return _REGISTRY_BY_KEY.get(key) if key else None
@@ -70,6 +70,15 @@ def _finish_time(remaining_str):
return None
# Shared by dryer/dishwasher/oven/washer -- oven.py imports this directly
# rather than keeping its own copy, since both wrote the identical
# state='Ready' RMW.
STOP_BUTTON = ButtonDesc(key='stop', field='', name='Stop', payload='Ready',
icon='mdi:stop',
write_fn=lambda p, rep, href=None: (
['operational', 'state', 'vs', '0'],
{'x.com.samsung.da.state': p}))
OPERATIONAL_STATE = Capability(
href='/operational/state/vs/0',
poll_tier='hot',
@@ -83,8 +92,12 @@ OPERATIONAL_STATE = Capability(
# Harmless for non-oven appliances — just an extra bool in state.
# Samsung firmware keeps state='Run' after progress reaches 'Finish',
# so we also gate on progress to avoid a stuck 'Running' indication.
# Named 'Running' rather than 'Cycle active' -- this href (and the
# start/pause/stop buttons below) is shared across the dryer/
# dishwasher/oven/washer families, and 'cycle' is laundry-specific
# vocabulary that doesn't fit an oven's bake/roast/etc.
BinarySensorDesc(key='cycle_active', device_class='running',
name='Cycle active',
name='Running',
rep_fn=lambda rep: (
_SAMSUNG_STATE_TO_OCF.get(rep.get('x.com.samsung.da.state')) == 'active'
and rep.get('x.com.samsung.da.progress') != 'Finish'
@@ -119,20 +132,16 @@ OPERATIONAL_STATE = Capability(
write_fn=lambda p, rep, href=None: (
['operational', 'state', 'vs', '0'],
{_delay_field(rep): _format_delay(p)})),
ButtonDesc(key='start', field='', name='Start cycle', payload='Run',
ButtonDesc(key='start', field='', name='Start', payload='Run',
icon='mdi:play',
write_fn=lambda p, rep, href=None: (
['operational', 'state', 'vs', '0'],
{'x.com.samsung.da.state': p})),
ButtonDesc(key='pause', field='', name='Pause cycle', payload='Pause',
ButtonDesc(key='pause', field='', name='Pause', payload='Pause',
icon='mdi:pause',
write_fn=lambda p, rep, href=None: (
['operational', 'state', 'vs', '0'],
{'x.com.samsung.da.state': p})),
ButtonDesc(key='stop', field='', name='Stop cycle', payload='Ready',
icon='mdi:stop',
write_fn=lambda p, rep, href=None: (
['operational', 'state', 'vs', '0'],
{'x.com.samsung.da.state': p})),
STOP_BUTTON,
),
)
@@ -26,10 +26,10 @@ from datetime import datetime, timezone, timedelta
from ..capability import Capability
from ..entities import (
BinarySensorDesc, ButtonDesc, NumberDesc, SelectDesc, SensorDesc,
SwitchDesc,
BinarySensorDesc, NumberDesc, SelectDesc, SensorDesc, SwitchDesc,
)
from .common import normalize_temp_unit
from .operational import STOP_BUTTON
# ---------------------------------------------------------------------------
# Constants
@@ -166,12 +166,6 @@ def _cook_time_write(p, rep, href=None):
}
def _stop_write(p, rep, href=None):
return ['operational', 'state', 'vs', '0'], {
'x.com.samsung.da.state': 'Ready',
}
def _oven_mode_write(p, rep, href=None):
if p not in _OVEN_MODES:
return None
@@ -237,7 +231,7 @@ OVEN_OPERATIONAL_STATE = Capability(
device_class='enum', options=('idle', 'active', 'pause'),
translation_key='machine_state', value_fn=_to_ocf),
BinarySensorDesc(key='cycle_active', field='x.com.samsung.da.state',
name='Cycle active', device_class='running',
name='Running', device_class='running',
value_fn=lambda v: _SAMSUNG_STATE_TO_OCF.get(v) == 'active'),
SensorDesc(key='progress_percentage',
field='x.com.samsung.da.progressPercentage',
@@ -254,8 +248,7 @@ OVEN_OPERATIONAL_STATE = Capability(
name='Cook time', unit='min', native_min=0, native_max=1439,
step=1.0, icon='mdi:timer', value_fn=_op_minutes,
write_fn=_cook_time_write),
ButtonDesc(key='stop', field='', name='Stop cycle', icon='mdi:stop',
payload='Stop', write_fn=_stop_write),
STOP_BUTTON,
),
)
+25
View File
@@ -0,0 +1,25 @@
{
"state_keys": [
"alarm_code",
"child_lock",
"cloud_connected",
"cook_time",
"current_temp_c",
"cycle_active",
"door_open",
"fast_preheat",
"finish_time",
"firmware_update",
"lamp",
"machine_state",
"natural_steam",
"operation_time_minutes",
"oven_mode",
"oven_setpoint",
"oven_state",
"power_switch",
"progress_percentage",
"remote_control",
"sound"
]
}
+289
View File
@@ -0,0 +1,289 @@
{
"meta": {
"model": "TP1X_DA-KS-OVEN-0107X (NV7000BS/ET5)",
"device_type": "oven",
"source": "issue #55 diagnostics (scrubbed)",
"note": "Wall oven reports no oneUiVersion; resolved via the '-OVEN-' modelNum token fallback in for_device_by_model, mirroring the '-RANGE-' fallback added for issue #44."
},
"device0": [
{
"rt": [
"x.com.samsung.devcol",
"oic.wk.col"
],
"if": [
"oic.if.baseline",
"oic.if.ll",
"oic.if.b"
]
},
{
"href": "/otninformation/vs/0",
"rep": {
"x.com.samsung.da.target": "",
"x.com.samsung.da.newVersionAvailable": "false",
"flashingProgress": "",
"otnStatus": "None",
"otnList": [
{
"type": "WIFI",
"modelId": "AKS-WW-TP1-22-OVEN-1",
"versions": [
"40250221"
],
"visVersion": "250221"
},
{
"type": "Micom",
"modelId": "07134046004140472641",
"versions": [
"23011700",
"23122000"
],
"visVersion": "231220"
},
{
"type": "Micom",
"modelId": "071360127441FFFFFFFF",
"versions": [
"21123000",
"FFFFFFFF"
],
"visVersion": "211230"
}
]
}
},
{
"href": "/connected/vs/0",
"rep": {
"x.com.samsung.da.connected": "On"
}
},
{
"href": "/doors/vs/0",
"rep": {
"x.com.samsung.da.items": [
{
"x.com.samsung.da.id": "0",
"x.com.samsung.da.description": "Door",
"x.com.samsung.da.openState": "Close"
}
],
"rt": [
"x.com.samsung.da.doors"
],
"if": [
"oic.if.baseline",
"oic.if.s"
]
}
},
{
"href": "/information/vs/0",
"rep": {
"x.com.samsung.da.modelNum": "TP1X_DA-KS-OVEN-0107X|40460041|50030018001611020A00000000000000",
"x.com.samsung.da.description": "NV7000BS/ET5",
"x.com.samsung.da.serialNum": "**REDACTED**",
"x.com.samsung.da.otnDUID": "**REDACTED**",
"x.com.samsung.da.items": [
{
"x.com.samsung.da.id": "0",
"x.com.samsung.da.description": "Version",
"x.com.samsung.da.type": "Software",
"x.com.samsung.da.number": "25022100",
"x.com.samsung.da.newVersionAvailable": "0"
},
{
"x.com.samsung.da.id": "1",
"x.com.samsung.da.description": "Version",
"x.com.samsung.da.type": "Firmware",
"x.com.samsung.da.number": "04600A23011700, 04726A23122000",
"x.com.samsung.da.newVersionAvailable": "0"
},
{
"x.com.samsung.da.id": "2",
"x.com.samsung.da.description": "Version",
"x.com.samsung.da.type": "Firmware",
"x.com.samsung.da.number": "01274A21123000",
"x.com.samsung.da.newVersionAvailable": "0"
}
],
"x.com.samsung.da.diagProtocolType": "BLE_OCF",
"x.com.samsung.da.diagLogType": [
"errCode",
"dump"
],
"x.com.samsung.da.diagDumpType": "file",
"x.com.samsung.da.diagEndPoint": "SSM",
"x.com.samsung.da.diagMnid": "0AJT",
"x.com.samsung.da.diagSetupid": "KV1",
"x.com.samsung.da.diagMinVersion": "3.0",
"x.com.samsung.da.diagTsId": "DA01"
}
},
{
"href": "/mode/vs/0",
"rep": {
"x.com.samsung.da.supportedModes": [
"Autocook",
"Convection",
"TopHeatPluseConvection",
"Conventional",
"LargeGrill",
"SmallGrill",
"BottomHeatPluseConvection",
"PlateWarm",
"KeepWarm",
"Bottom",
"EcoConvection",
"FanGrill",
"Defrost",
"SteamClean"
],
"x.com.samsung.da.modes": [
"NoOperation"
],
"x.com.samsung.da.options": [
"DeviceType_NV7000BS/ET5",
"UpperTimerCurrent_0",
"UpperTimerSet_0",
"UpperTimerState_Ready",
"UpperLamp_Off",
"Sound_On"
],
"x.com.samsung.da.defaultMode": "Convection",
"rt": [
"x.com.samsung.da.mode"
],
"if": [
"oic.if.baseline",
"oic.if.a"
]
}
},
{
"href": "/operational/state/vs/0",
"rep": {
"x.com.samsung.da.state": "Ready",
"x.com.samsung.da.operationTime": "00:00:00",
"x.com.samsung.da.remainingTime": "00:00:00",
"x.com.samsung.da.progressPercentage": "0",
"rt": [
"x.com.samsung.da.operation"
],
"if": [
"oic.if.baseline",
"oic.if.a"
]
}
},
{
"href": "/alarms/vs/0",
"rep": {
"rt": [
"x.com.samsung.da.alarms"
],
"if": [
"oic.if.baseline",
"oic.if.s"
],
"x.com.samsung.da.items": [
{
"x.com.samsung.da.id": "0",
"x.com.samsung.da.description": "Alarm",
"x.com.samsung.da.alarmType": "Device",
"x.com.samsung.da.code": "OV_E_OFF",
"x.com.samsung.da.triggeredTime": "2026-07-23T15:26:07"
}
]
}
},
{
"href": "/oven/vs/0",
"rep": {
"x.com.samsung.da.state": "Ready",
"x.com.samsung.da.recipe": "00000000000000",
"rt": [
"x.com.samsung.da.oven"
],
"if": [
"oic.if.baseline",
"oic.if.s"
]
}
},
{
"href": "/temperatures/vs/0",
"rep": {
"x.com.samsung.da.items": [
{
"x.com.samsung.da.id": "0",
"x.com.samsung.da.description": "Temperature",
"x.com.samsung.da.desired": "0",
"x.com.samsung.da.current": "0",
"x.com.samsung.da.increment": "5",
"x.com.samsung.da.unit": "Celsius"
}
],
"rt": [
"x.com.samsung.da.temperatures"
],
"if": [
"oic.if.baseline",
"oic.if.a"
]
}
},
{
"href": "/timezone/vs/0",
"rep": {
"timezoneid": "Europe/Rome",
"offset": "+02:00",
"DST": "ON"
}
},
{
"href": "/configuration/vs/0",
"rep": {}
},
{
"href": "/kidslock/vs/0",
"rep": {
"x.com.samsung.da.kidsLock": "Ready"
}
},
{
"href": "/power/vs/0",
"rep": {
"x.com.samsung.da.power": "On"
}
},
{
"href": "/remotectrl/vs/0",
"rep": {
"x.com.samsung.da.remoteControlEnabled": "true",
"rt": [
"x.com.samsung.da.configuration"
],
"if": [
"oic.if.baseline",
"oic.if.s"
]
}
},
{
"href": "/wirelessinfo/vs/0",
"rep": {
"macaddressWiFi": "**REDACTED**",
"macaddressBLE": "**REDACTED**"
}
},
{
"href": "/quickcontrol/info/vs/0",
"rep": {
"supportedVersion": "1.0"
}
}
]
}
+12
View File
@@ -229,6 +229,18 @@ class TestForDeviceByModel:
assert reg is not None
assert reg.name == 'washer'
def test_oven_via_oven_token(self):
"""Issue #55: a wall oven (NV7000BS/ET5) reports no oneUiVersion and
an unrecognized consumer token ('NV'); it falls back to the '-OVEN-'
token in modelNum, mirroring the '-RANGE-' fallback for issue #44."""
from custom_components.localthings.registry.by_type import for_device_by_model
reg = for_device_by_model(
'TP1X_DA-KS-OVEN-0107X|40460041|50030018001611020A00000000000000',
'NV7000BS/ET5',
)
assert reg is not None
assert reg.name == 'oven'
def test_unknown_model_returns_none(self):
from custom_components.localthings.registry.by_type import for_device_by_model
reg = for_device_by_model('SOME-UNKNOWN-BOARD', 'SOME-UNKNOWN-BOARD')
+18
View File
@@ -258,6 +258,24 @@ def test_registry_reproduces_golden_state_keys_for_air_purifier():
)
def test_registry_reproduces_golden_state_keys_for_oven():
"""Wall oven (model TP1X_DA-KS-OVEN-0107X, issue #55) -- reports no
oneUiVersion; resolved via the '-OVEN-' modelNum token fallback in
for_device_by_model, mirroring the '-RANGE-' fallback added for
issue #44. Before that fallback existed the device type came back
'unknown' and every href fell through to the global CAPABILITIES
registry instead of the oven family's own."""
from tests.conftest import _load_device
resources = _load_device('oven')
golden = json.loads((GOLDEN / 'oven.json').read_text())
state_keys = _new_state_keys('oven', resources)
assert set(state_keys) == set(golden['state_keys']), (
f"state_keys mismatch:\n"
f" extra: {sorted(set(state_keys) - set(golden['state_keys']))}\n"
f" missing: {sorted(set(golden['state_keys']) - set(state_keys))}"
)
def test_resources_from_batch_preferred_over_flat():
from tests.conftest import _resources_from_dump
dump = {
+22
View File
@@ -1,8 +1,30 @@
"""Unit tests for oven-family capabilities."""
from custom_components.localthings.registry.by_type import for_device_by_model
from custom_components.localthings.registry.capabilities import oven
from custom_components.localthings.registry.discovery import discover
# ---------------------------------------------------------------------------
# Device-type detection + full-dump coverage (issue #55)
# ---------------------------------------------------------------------------
def test_oven_fixture_resolves_and_has_no_unbound_hrefs():
"""The issue #55 dump previously came back device_type='unknown' with
/connected/vs/0 unbound -- resolving via the '-OVEN-' modelNum token
fallback must leave every href in the oven registry bound or ignored."""
from tests.conftest import _load_device
resources = _load_device('oven')
info = resources['/information/vs/0']
reg = for_device_by_model(
info['x.com.samsung.da.modelNum'], info['x.com.samsung.da.description'])
assert reg is not None
assert reg.name == 'oven'
unbound = []
discover(resources, reg.capabilities, reg.pattern_capabilities, log=unbound.append)
assert unbound == []
# ---------------------------------------------------------------------------
# OVEN_SETPOINT — NumberDesc with RMW write semantics
# ---------------------------------------------------------------------------