Bump version to 0.23.0

Add a global disable for downloaded cycles and clarify setup instructions

custom_components/localthings/__init__.py

@@ -7,10 +7,8 @@ import logging
 import re
 from typing import Any
 
+from homeassistant import const as ha_const
 from homeassistant.config_entries import ConfigEntry
-from homeassistant.const import (
-    CONCENTRATION_MICROGRAMS_PER_CUBIC_METER as PARTICULATE_UNIT,
-)
 from homeassistant.const import EVENT_HOMEASSISTANT_STOP
 from homeassistant.core import Event, HomeAssistant, callback
 from homeassistant.exceptions import ConfigEntryNotReady
@@ -25,6 +23,22 @@ from .services import async_setup_services
 
 _LOGGER = logging.getLogger(__name__)
 
+# UnitOfDensity is the non-deprecated home for this value from whichever HA
+# release introduces it; CONCENTRATION_MICROGRAMS_PER_CUBIC_METER logs a
+# removal warning (2027.8) on those releases every time it's accessed.
+# hacs.json's floor (2025.1.0) predates UnitOfDensity existing at all, so
+# this is a runtime getattr rather than a static import ty could only ever
+# resolve against one HA generation -- see _relabel_particulate_statistics'
+# own new_unit_class feature-detection below for the same pattern. The
+# getattr short-circuits before the deprecated name is ever touched on a
+# release new enough to have UnitOfDensity.
+_unit_of_density = getattr(ha_const, "UnitOfDensity", None)
+PARTICULATE_UNIT = (
+    _unit_of_density.MICROGRAMS_PER_CUBIC_METER
+    if _unit_of_density is not None
+    else ha_const.CONCENTRATION_MICROGRAMS_PER_CUBIC_METER
+)
+
 
 async def async_setup(hass: HomeAssistant, config: ConfigType) -> bool:
     # Services are process-global, registered once here rather than per
@@ -303,6 +317,25 @@ async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
         hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP, _async_close_on_stop)
     )
 
+    # Nothing else reacts to an options-flow save (issue #364): the cloud-
+    # courses Repair and canonical-view cache are only refreshed from
+    # _on_cloud_courses_changed, which only runs when a poll/observe
+    # actually reports new data. Without this, turning "Download cycles"
+    # off would leave an already-open Repair sitting there -- and an
+    # already-named program still offered as a cycle -- until the next
+    # unrelated change happened to fire it, indistinguishable from the
+    # toggle not working. Every other option (CONF_LEARN_MODES,
+    # CONF_BYPASS_REMOTE_CONTROL, ...) is read live on its own next use and
+    # has no comparable standing state to refresh, so this listener exists
+    # for cloud courses specifically rather than as a general
+    # options-changed hook. Must be a coroutine function -- HA wraps
+    # whatever an update listener returns in async_create_task, which raises
+    # on a plain callback's None.
+    async def _async_options_updated(_hass: HomeAssistant, _entry: ConfigEntry) -> None:
+        coordinator._on_cloud_courses_changed()
+
+    entry.async_on_unload(entry.add_update_listener(_async_options_updated))
+
     await hass.config_entries.async_forward_entry_setups(entry, PLATFORMS)
     return True
 

custom_components/localthings/config_flow.py

@@ -42,6 +42,7 @@ from .const import (
     CONF_BYPASS_REMOTE_CONTROL,
     CONF_CA_CERT_PEM,
     CONF_CA_KEY_PEM,
+    CONF_CLOUD_COURSES_ENABLED,
     CONF_DEVICE_TYPE,
     CONF_FINISH_TIME_HYSTERESIS_MINUTES,
     CONF_HOST,
@@ -52,6 +53,7 @@ from .const import (
     CONF_MODEL,
     CONF_PORT,
     CONF_SERIAL,
+    DEFAULT_CLOUD_COURSES_ENABLED,
     DEFAULT_FINISH_TIME_HYSTERESIS_MINUTES,
     DEFAULT_LEARN_MODES,
     DOMAIN,
@@ -991,6 +993,12 @@ class LocalThingsOptionsFlow(config_entries.OptionsFlow):
                             CONF_LEARN_MODES, DEFAULT_LEARN_MODES
                         ),
                     ): bool,
+                    vol.Required(
+                        CONF_CLOUD_COURSES_ENABLED,
+                        default=self.config_entry.options.get(
+                            CONF_CLOUD_COURSES_ENABLED, DEFAULT_CLOUD_COURSES_ENABLED
+                        ),
+                    ): bool,
                 }
             ),
         )
@@ -1038,6 +1046,18 @@ class LocalThingsOptionsFlow(config_entries.OptionsFlow):
         program in the moment they select it, rather than about a list of hex
         ids some time later. The bulk form stays for renaming afterwards,
         which guided setup is bad at.
+
+        Setup still works with cloud_courses_enabled off (see
+        CONF_CLOUD_COURSES_ENABLED's own comment for why) -- someone who
+        wants to name one cycle without turning the feature fully on for
+        everything else still can (issue #364). The catalog's own
+        description covers that state directly rather than through a
+        description_placeholder built here: a placeholder is a literal
+        substitution HA never runs back through translation, so an
+        English sentence assembled in Python would show untranslated text
+        in every other locale -- unlike the SmartThings screen names
+        quoted elsewhere in this catalog, which stay English everywhere
+        because that's a third-party app's own label, not one of ours.
         """
         return self.async_show_menu(
             step_id="cloud_courses",

custom_components/localthings/const.py

@@ -57,6 +57,21 @@ DEFAULT_LEARN_MODES = True
 # {"download_course": "87"|null, "slots": {slot: {"blob": ..., "name": ...}}}
 CONF_CLOUD_COURSES = "cloud_courses"
 
+# Options-flow key: whether downloaded programs are offered as selectable
+# cycles and nagged about via the "not set up yet" Repair (issue #364).
+# Defaults to on. Unlike CONF_LEARN_MODES this does not also stop passive
+# observation -- a device that merely *advertises* download slots without
+# the owner ever meaning to use them (SmartThings appears to seed one from
+# the cloud automatically, per #364's reporters) is exactly the case this
+# exists for, and turning it off is the fix. Guided/manual setup stay
+# reachable and still record what they see either way: they are a deliberate
+# per-session action, not the passive background behavior this silences, and
+# leaving them working means flipping the option back on immediately surfaces
+# anything set up in the meantime instead of asking the user to redo it. See
+# coordinator.cloud_courses_enabled for exactly what it gates.
+CONF_CLOUD_COURSES_ENABLED = "cloud_courses_enabled"
+DEFAULT_CLOUD_COURSES_ENABLED = True
+
 # Options-flow key (entry.options, not entry.data): lets a user override
 # the device-wide remote-control-off write block for a specific device
 # (issue #54). Some devices accept certain writes even while reporting

custom_components/localthings/coordinator.py

@@ -30,6 +30,7 @@ from .cloudcourse import persist as cloud_persist
 from .const import (
     CONF_BYPASS_REMOTE_CONTROL,
     CONF_CLOUD_COURSES,
+    CONF_CLOUD_COURSES_ENABLED,
     CONF_DEVICE_TYPE,
     CONF_HOST,
     CONF_LEAF_CERT_PEM,
@@ -40,6 +41,7 @@ from .const import (
     CONF_MODEL,
     CONF_PORT,
     CONF_SERIAL,
+    DEFAULT_CLOUD_COURSES_ENABLED,
     DEFAULT_LEARN_MODES,
     DEVICE_SUPPORT_ISSUE_URL,
     DOMAIN,
@@ -379,12 +381,21 @@ class LocalThingsCoordinator(DataUpdateCoordinator[dict[str, Any]]):
         rep = snapshot.get(cloudcourse.COURSE_HREF)
         if rep is None:
             return snapshot
-        view = self._cloud.view()
+        view = self._cloud_view()
         if not view:
             return snapshot
         snapshot[cloudcourse.COURSE_HREF] = {**rep, cloudcourse.FIELD: view}
         return snapshot
 
+    def _cloud_view(self) -> dict:
+        """`self._cloud.view()`, or nothing while cloud_courses_enabled is
+        off (issue #364) -- entity_resources/entity_rep's one gate so a
+        previously-named program stops being offered the moment the option
+        is turned off, symmetric with how it starts being offered again the
+        moment it's turned back on. The store itself is untouched either
+        way; only what these two hand to the registry changes."""
+        return self._cloud.view() if self.cloud_courses_enabled else {}
+
     def entity_rep(self, href: str) -> dict:
         """One href's rep as descriptors see it -- `resource()` plus the
         merge `entity_resources` would have applied. Exists so the write path
@@ -393,7 +404,7 @@ class LocalThingsCoordinator(DataUpdateCoordinator[dict[str, Any]]):
         rep = self.resource(href)
         if href != cloudcourse.COURSE_HREF or not rep:
             return rep
-        view = self._cloud.view()
+        view = self._cloud_view()
         return {**rep, cloudcourse.FIELD: view} if view else rep
 
     def device_resources(self, subdevice: Subdevice) -> dict[str, dict]:
@@ -540,15 +551,29 @@ class LocalThingsCoordinator(DataUpdateCoordinator[dict[str, Any]]):
     # Cloud "Download" programs (issue #342) -- see cloudcourse.py
     # ------------------------------------------------------------------
 
+    @property
+    def cloud_courses_enabled(self) -> bool:
+        """Whether downloaded programs are offered as cycles and nagged
+        about via the "not set up yet" Repair (issue #364).
+
+        Deliberately does NOT gate `_observe_cloud_courses` below -- see
+        CONF_CLOUD_COURSES_ENABLED's own comment for why passive recording
+        keeps running (cheap, and what guided/manual setup depend on)
+        while only the Repair and the entity offering stop.
+        """
+        return bool(
+            self._entry.options.get(CONF_CLOUD_COURSES_ENABLED, DEFAULT_CLOUD_COURSES_ENABLED)
+        )
+
     def _observe_cloud_courses(self, rep: dict) -> None:
         """Learn a downloaded program's replay payload from one applied
         /course/vs/0 rep. Runs on whichever thread applied the update, so
         both the persist and the Repairs refresh go through hass.add_job.
 
-        Unlike learned modes this has no opt-out option: it records only
+        Always records, regardless of cloud_courses_enabled: it records only
         what the appliance itself reports about programs it itself
-        advertises, and nothing is offered in the UI until the user names it.
-        """
+        advertises, and nothing is offered in the UI until both the option
+        is on and the user has named it."""
         if not self._cloud.observe(rep):
             return
         self.hass.add_job(self._persist_cloud_courses)
@@ -556,9 +581,33 @@ class LocalThingsCoordinator(DataUpdateCoordinator[dict[str, Any]]):
     @callback
     def _persist_cloud_courses(self) -> None:
         cloud_persist(self.hass, self._entry, self._cloud.snapshot())
-        # A newly learned program changes what entity_resources() hands out.
+        self._on_cloud_courses_changed()
+
+    @callback
+    def _on_cloud_courses_changed(self) -> None:
+        """Refresh everything that depends on the cloud-course store or the
+        cloud_courses_enabled option: the canonical-view cache (a newly
+        learned/named program, or the option flipping, changes what
+        entity_resources() hands out), the live entities, and the Repair.
+
+        Also the __init__.py options-update listener's one hook (issue
+        #364): toggling cloud_courses_enabled changes _cloud_view()'s
+        answer without touching last_resources, so a canonical view cached
+        from before the toggle would otherwise keep answering with it.
+
+        _push_cache_snapshot is what actually gets a change here in front
+        of a user, not just correct on the next read: select.py's
+        current_option comes from coordinator.data, which only moves on
+        async_set_updated_data, and nothing prompts Home Assistant to
+        re-read a live `options` property (cycle's callable options included)
+        without the state-changed signal that call sends. Without it, both
+        this and a name applied through apply_cloud_courses -- which has
+        called this same method since before this option existed -- would
+        sit stale until whatever poll or observe happened to run next.
+        """
         self._canonical_cache.clear()
         self._refresh_cloud_course_issue()
+        self._push_cache_snapshot()
 
     @property
     def cloud_courses(self) -> CloudCourses:
@@ -638,9 +687,33 @@ class LocalThingsCoordinator(DataUpdateCoordinator[dict[str, Any]]):
         nothing they do in Home Assistant could clear it. Running one
         downloaded program is what turns the nudge on, and naming them is
         what turns it off.
+
+        Also gated on cloud_courses_enabled (issue #364): a device can seed a
+        slot's payload before the owner has ever meant to use the feature --
+        reporters observed one auto-populate from a SmartThings-provided
+        example -- so "at least one payload seen" alone isn't proof of
+        intent to use it. Checked here rather than skipping
+        _observe_cloud_courses' recording, so turning the option back on
+        re-evaluates against everything already learned instead of only
+        what arrives afterward.
+
+        Also a no-op with an empty cloud_course_rep (issue #364): this now
+        runs from __init__.py's options-update listener on every entry
+        save, including an unrelated one (CONF_BYPASS_REMOTE_CONTROL, say)
+        made before this device's first poll or while it's rehydrated
+        offline. /course/vs/0 unpolled reads as no advertised slots, which
+        would otherwise delete a Repair a real poll had every reason to
+        raise, on evidence that only means "haven't asked the device yet."
+        Leaves whatever issue state already exists untouched rather than
+        guess either way; the next real poll re-evaluates for real.
         """
         issue_id = f"cloud_courses_{self._entry.entry_id}"
+        if not self.cloud_courses_enabled:
+            ir.async_delete_issue(self.hass, DOMAIN, issue_id)
+            return
         rep = self.cloud_course_rep()
+        if not rep:
+            return
         record = self._cloud.snapshot()
         courses = cycle_options(self.canonical_resources(MAIN))
         pending = cloudcourse.undiscovered(rep, record, courses)

custom_components/localthings/manifest.json

@@ -13,5 +13,5 @@
     "pyOpenSSL>=23.0",
     "smartthings-local>=0.1.8"
   ],
-  "version": "0.22.0"
+  "version": "0.23.0"
 }

custom_components/localthings/translations/cs.json

@@ -376,7 +376,25 @@
           "53": "AI sušení+",
           "4e": "Automatické sušení",
           "26": "Provětrání",
-          "2a": "Hygienické sušení+"
+          "2a": "Hygienické sušení+",
+          "02": "AI sušení",
+          "03": "Super Speed",
+          "05": "Ložní prádlo",
+          "07": "Jemné prádlo",
+          "09": "Košile",
+          "0b": "Péče o prošívané bundy",
+          "0c": "Outdoor impregnace",
+          "0e": "Ručníky",
+          "0f": "Vlna",
+          "11": "Studený vzduch",
+          "28": "Vnitřní dezinfekce horkým vzduchem",
+          "37": "Halenky",
+          "38": "Žehlení",
+          "39": "Odvlhčování místnosti",
+          "3a": "Hygienické sušení",
+          "3b": "Ložní prádlo/Odstranění prachu",
+          "3c": "Sportovní oblečení",
+          "3d": "Džíny"
         }
       },
       "favorite_capacity": {
@@ -647,11 +665,31 @@
         "name": "Cyklus",
         "state": {
           "01": "Normální",
+          "02": "Extra intenzivní",
+          "03": "Super Eco",
           "04": "Rychlé praní",
-          "06": "XXL prádlo",
+          "05": "Vlna/Spodní prádlo",
+          "06": "Ložní prádlo",
+          "07": "Outdoor",
           "08": "Máchání+odstřeďování",
+          "09": "Čištění bubnu",
           "0a": "Ručníky",
+          "0b": "Praní varem",
+          "0c": "Dětské potřeby",
+          "0d": "Pouze odstřeďování",
+          "0e": "Zataženo",
+          "0f": "Čisté praní",
+          "10": "Sušicí odstřeďování",
+          "11": "Letní ložní prádlo",
+          "12": "Bavlna",
+          "13": "Černá bavlna",
+          "14": "Jemné spodní prádlo",
+          "15": "Sportovní oblečení",
+          "16": "Halenky",
           "17": "Stažený program",
+          "18": "Soft Bubble",
+          "19": "AI praní",
+          "1a": "Košile",
           "1b": "Bavlna",
           "1c": "Eco 40-60",
           "1d": "Super rychlé",
@@ -676,6 +714,7 @@
           "32": "Košile",
           "33": "Ručníky",
           "34": "Smíšené",
+          "35": "Eko bavlna",
           "36": "Praní+sušení",
           "37": "Sušení vzduchem",
           "38": "Sušení bavlny",
@@ -717,8 +756,7 @@
           "8f": "Intenzivní studená",
           "96": "Méně mikrovláken",
           "a0": "15min rychlé praní",
-          "b0": "Smíšená náplň",
-          "35": "Eko bavlna"
+          "b0": "Smíšená náplň"
         }
       },
       "washer_dry_level": {
@@ -1484,11 +1522,12 @@
       },
       "settings": {
         "title": "Nastavení zápisu pro dálkové ovládání",
-        "description": "Některá zařízení přijímají určité zápisy (např. výchozí dávkování pracího prostředku/aviváže v pračce) i když hlásí vypnuté dálkové ovládání. LocalThings ve výchozím nastavení blokuje každý zápis srozumitelnou chybou, kdykoli zařízení hlásí vypnuté dálkové ovládání, místo aby jej zařízení tiše odmítlo. Povolte toto pouze tehdy, pokud jste ověřili, že zápisy na tomto zařízení skutečně fungují i s vypnutým dálkovým ovládáním – jinak tuto srozumitelnou chybu vyměníte za tiché selhání.\n\nNěkterá zařízení hlásí režim, který nikdy neuvedou mezi podporovanými – například klimatizace běžící v režimu Quiet, která nabízí pouze Off/Sleep/Speed. LocalThings si každý takový režim zapamatuje a dál jej nabízí, takže zůstane volitelný, jakmile v něm zařízení alespoň jednou bylo. Vypnutím této volby se budou nabízet pouze režimy, které zařízení samo uvádí; k vymazání již zapamatovaných použijte „Zapomenout zapamatované režimy“ v předchozí nabídce.",
+        "description": "Některá zařízení přijímají určité zápisy (např. výchozí dávkování pracího prostředku/aviváže v pračce) i když hlásí vypnuté dálkové ovládání. LocalThings ve výchozím nastavení blokuje každý zápis srozumitelnou chybou, kdykoli zařízení hlásí vypnuté dálkové ovládání, místo aby jej zařízení tiše odmítlo. Povolte toto pouze tehdy, pokud jste ověřili, že zápisy na tomto zařízení skutečně fungují i s vypnutým dálkovým ovládáním – jinak tuto srozumitelnou chybu vyměníte za tiché selhání.\n\nNěkterá zařízení hlásí režim, který nikdy neuvedou mezi podporovanými – například klimatizace běžící v režimu Quiet, která nabízí pouze Off/Sleep/Speed. LocalThings si každý takový režim zapamatuje a dál jej nabízí, takže zůstane volitelný, jakmile v něm zařízení alespoň jednou bylo. Vypnutím této volby se budou nabízet pouze režimy, které zařízení samo uvádí; k vymazání již zapamatovaných použijte „Zapomenout zapamatované režimy“ v předchozí nabídce. Zařízení pro praní se staženými cykly z cloudu zde dostane připomenutí, jakmile nahlásí cyklus, který Home Assistant zatím nemůže nabídnout -- některá zařízení jej nahlásí, i když jste obrazovku „Stažené cykly“ v aplikaci SmartThings sami nikdy neotevřeli. Vypněte tuto možnost, chcete-li připomenutí zastavit a skrýt už pojmenované stažené cykly ze seznamu cyklů; nic z toho, co je již nastaveno, se neztratí, a po opětovném zapnutí se to hned znovu objeví.",
         "data": {
           "bypass_remote_control_lock": "Povolit zápis i když je dálkové ovládání hlášeno jako vypnuté",
           "finish_time_hysteresis_minutes": "Odhadovaný konec -- minimální změna (minuty)",
-          "learn_device_modes": "Pamatovat si režimy, které zařízení hlásí, ale neuvádí jako podporované"
+          "learn_device_modes": "Pamatovat si režimy, které zařízení hlásí, ale neuvádí jako podporované",
+          "cloud_courses_enabled": "Nabízet stažené cykly"
         }
       },
       "forget_learned_modes": {
@@ -1519,14 +1558,14 @@
       },
       "cloud_manual": {
         "title": "Stažené cykly",
-        "description": "Toto zařízení hlásí {total} stažených cyklů; {found} jich bylo dosud zjištěno.\n\nNastavení staženého cyklu jsou viditelná pouze tehdy, když je daný cyklus právě načtený, a zařízení nikdy nehlásí jejich názvy. Chcete-li doplnit chybějící ({pending}): na zařízení vyberte Stažený program, poté postupně projděte jednotlivé stažené programy, u každého se na pár sekund zastavte, a vraťte se sem.\n\nKaždému z nich zadejte název, který chcete vidět v Home Assistant. Necháte-li název prázdný, daný cyklus zůstane mimo seznam cyklů. Názvy musí být jedinečné.\n\nStažený program je program na tomto zařízení, který spouští stažený cyklus. Rozpoznává se automaticky, ale před použitím jej zde potvrďte: výběrem staženého cyklu se do zařízení zapíše tento kód programu.",
+        "description": "Toto zařízení hlásí {total} stažených cyklů; {found} jich bylo dosud zjištěno.\n\nNastavení staženého cyklu jsou viditelná pouze tehdy, když je daný cyklus právě načtený, a zařízení nikdy nehlásí jejich názvy. Chcete-li doplnit chybějící ({pending}): v aplikaci SmartThings (ne na samotném zařízení) otevřete toto zařízení a klepněte na „Stažené cykly“ -- samostatný řádek odlišný od „Cyklus“, níže na obrazovce, a ten, na kterém zde záleží. Poté postupně projděte jednotlivé stažené programy, u každého se na pár sekund zastavte, aby jej LocalThings zaznamenal, a vraťte se sem.\n\nKaždému z nich zadejte název, který chcete vidět v Home Assistant. Necháte-li název prázdný, daný cyklus zůstane mimo seznam cyklů. Názvy musí být jedinečné.\n\nStažený program je program na tomto zařízení, který spouští stažený cyklus. Rozpoznává se automaticky, ale před použitím jej zde potvrďte: výběrem staženého cyklu se do zařízení zapíše tento kód programu.",
         "data": {
           "download_course": "Kód programu „Stažený program“"
         }
       },
       "cloud_courses": {
         "title": "Stažené cykly",
-        "description": "Průvodce nastavením vás provede zařízením: na zařízení vyberte stažený cyklus a jakmile je nalezen, pojmenujte ho – jeden po druhém.\n\nÚprava názvů zobrazí vše dosud nalezené najednou – použijte ji později k přejmenování nebo opravě.",
+        "description": "Průvodce nastavením vás provede: v aplikaci SmartThings (ne na samotném zařízení) otevřete toto zařízení a klepněte na „Stažené cykly“ -- samostatný řádek odlišný od „Cyklus“, níže na obrazovce, a ten, na kterém zde záleží. Vyberte tam cyklus, vraťte se sem a jakmile je nalezen, pojmenujte ho – jeden po druhém.\n\nÚprava názvů zobrazí vše dosud nalezené najednou – použijte ji později k přejmenování nebo opravě. Pojmenování funguje v obou případech, ale pojmenovaný cyklus se nabízí jako vybratelný cyklus jen tehdy, když je v nastavení zařízení zapnuto „Nabízet stažené cykly“.",
         "menu_options": {
           "cloud_guided": "Průvodce nastavením",
           "cloud_manual": "Upravit názvy"
@@ -1537,7 +1576,7 @@
       },
       "cloud_name": {
         "title": "Pojmenujte tento cyklus",
-        "description": "Zařízení přepnulo na stažený cyklus (pozice {slot}) a hlásí zbývající čas {remaining}.\n\nZadejte název, který chcete vidět v Home Assistant, a poté na zařízení vyberte další cyklus. Necháte-li pole prázdné, tento cyklus zůstane mimo seznam.\n\nDosud pojmenováno ({named} z {total}): {named_list}\n\nNázvy musí být jedinečné. Toto okno můžete kdykoli zavřít – názvy se ukládají průběžně.",
+        "description": "Pozice „Stažené cykly“ zařízení nyní obsahuje nový cyklus (pozice {slot}) a hlásí zbývající čas {remaining}.\n\nZadejte název, který chcete vidět v Home Assistant, a poté na obrazovce „Stažené cykly“ v aplikaci SmartThings vyberte další cyklus, který ještě není označen jako „Stažený“. Necháte-li pole prázdné, tento cyklus zůstane mimo seznam.\n\nDosud pojmenováno ({named} z {total}): {named_list}\n\nNázvy musí být jedinečné. Toto okno můžete kdykoli zavřít – názvy se ukládají průběžně.",
         "data": {
           "name": "Název",
           "download_course": "Kód programu „Stažený program“"
@@ -1545,7 +1584,7 @@
       },
       "cloud_timeout": {
         "title": "Nebyl vybrán žádný cyklus",
-        "description": "Na zařízení nebylo nic vybráno. Ujistěte se, že je nastaveno na Stažený program, a poté postupně procházejte stažené programy.\n\nDosud pojmenováno ({named} z {total}): {named_list}\n\nVše dosud pojmenované je již uloženo.",
+        "description": "Na zařízení se nic nezměnilo. Ujistěte se, že jste v aplikaci SmartThings klepli na „Stažené cykly“ -- samostatný řádek odlišný od „Cyklus“, níže na obrazovce -- a vybrali cyklus, který ještě nebyl označen jako „Stažený“, a poté klepli na Hotovo.\n\nDosud pojmenováno ({named} z {total}): {named_list}\n\nVše dosud pojmenované je již uloženo.",
         "menu_options": {
           "cloud_guided": "Počkat znovu",
           "cloud_finish": "Dokončit"
@@ -1562,7 +1601,7 @@
       "not_loaded": "Toto zařízení ještě není připojeno. Zkuste to znovu, až se načte."
     },
     "progress": {
-      "cloud_wait": "Nyní na zařízení vyberte stažený cyklus.\n\nDosud pojmenováno ({named} z {total}): {named_list}\n\nToto okno můžete kdykoli zavřít – názvy se ukládají průběžně."
+      "cloud_wait": "V aplikaci SmartThings (ne na samotném zařízení) otevřete toto zařízení a klepněte na „Stažené cykly“ -- samostatný řádek odlišný od „Cyklus“, níže na obrazovce, který uvádí pouze cykly rozpoznatelné tímto způsobem. Vyberte cyklus, který ještě není označen jako „Stažený“, a klepněte na Hotovo.\n\nZařízení nemusí být poblíž ani spuštěné -- stačí, když je zapnuté a připojené.\n\nDosud pojmenováno ({named} z {total}): {named_list}\n\nToto okno můžete kdykoli zavřít – názvy se ukládají průběžně."
     }
   },
   "issues": {
@@ -1572,7 +1611,7 @@
     },
     "cloud_courses_undiscovered": {
       "title": "Stažené cykly nejsou nastaveny pro {device_name}",
-      "description": "{device_name} má {pending} z {total} stažených cyklů, které Home Assistant zatím nemůže nabídnout. Stažený cyklus lze použít až poté, co byl na zařízení zjištěn načtený a co jste mu dali název.\n\nChcete-li je nastavit, přejděte do Nastavení > Zařízení a služby > LocalThings > {device_name} > Konfigurovat > Stažené cykly a postupujte podle pokynů."
+      "description": "{device_name} má {pending} z {total} stažených cyklů, které Home Assistant zatím nemůže nabídnout. Stažený cyklus lze použít až poté, co byl na zařízení zjištěn načtený -- na obrazovce „Stažené cykly“ v aplikaci SmartThings, ne na obrazovce „Cyklus“ -- a co jste mu dali název.\n\nChcete-li je nastavit, přejděte do Nastavení > Zařízení a služby > LocalThings > {device_name} > Konfigurovat > Stažené cykly a postupujte podle pokynů.\n\nStažené cykly nepoužíváte? Přejděte místo toho do Konfigurovat > Nastavení zařízení a vypněte „Nabízet stažené cykly“, čímž toto připomenutí natrvalo umlčíte."
     }
   },
   "exceptions": {

custom_components/localthings/translations/de.json

@@ -376,7 +376,25 @@
           "4e": "Selbsttrocknung",
           "17": "Super Speed",
           "26": "Frischluft",
-          "2a": "Hygienepflege+"
+          "2a": "Hygienepflege+",
+          "02": "KI-Trocknen",
+          "03": "Super Speed",
+          "05": "Bettwäsche",
+          "07": "Feinwäsche",
+          "09": "Hemden",
+          "0b": "Paddingpflege",
+          "0c": "Outdoor-Imprägnierpflege",
+          "0e": "Handtücher",
+          "0f": "Wolle",
+          "11": "Kaltluft",
+          "28": "Innenraum-Heißluftdesinfektion",
+          "37": "Blusen",
+          "38": "Bügeltrocken",
+          "39": "Raumentfeuchtung",
+          "3a": "Hygienepflege",
+          "3b": "Bettwäsche/Entstauben",
+          "3c": "Sportkleidung",
+          "3d": "Jeansstoff"
         }
       },
       "favorite_capacity": {
@@ -610,10 +628,31 @@
         "name": "Programm",
         "state": {
           "01": "Normal",
+          "02": "Super Intensiv",
+          "03": "Super Eco",
           "04": "Schnellwäsche",
-          "06": "XXL-Wäsche",
+          "05": "Wolle/Dessous",
+          "06": "Bettwäsche",
+          "07": "Outdoor",
           "08": "Spülen + Schleudern",
+          "09": "Trommelreinigung",
           "0a": "Handtücher",
+          "0b": "Kochwäsche",
+          "0c": "Babypflege",
+          "0d": "Nur Schleudern",
+          "0e": "Bewölkter Tag",
+          "0f": "Reinwäsche",
+          "10": "Trockenschleudern",
+          "11": "Sommer-Bettwäsche",
+          "12": "Baumwolle",
+          "13": "Schwarze Baumwolle",
+          "14": "Feine Unterwäsche",
+          "15": "Sportkleidung",
+          "16": "Blusen",
+          "17": "Heruntergeladen",
+          "18": "Soft Bubble",
+          "19": "KI-Wäsche",
+          "1a": "Hemden",
           "1b": "Baumwolle",
           "1c": "Eco 40-60",
           "1d": "Super Speed",
@@ -638,6 +677,7 @@
           "32": "Hemden",
           "33": "Handtücher",
           "34": "Mischwäsche",
+          "35": "Eco Baumwolle",
           "36": "Waschen + Trocknen",
           "37": "Air Wash",
           "38": "Trocknen Baumwolle",
@@ -652,17 +692,6 @@
           "60": "Selbstreinigung+",
           "65": "Buntwäsche",
           "66": "Jeansstoff",
-          "7c": "Weißwäsche",
-          "7d": "Bettwäsche/Wasserdicht",
-          "7e": "Selbstreinigung",
-          "7f": "Wolle/Feinwäsche",
-          "86": "Tiefenreinigung",
-          "87": "Download",
-          "8f": "Kaltwäsche Intensiv",
-          "96": "Weniger Mikrofasern",
-          "a0": "Schnelle Wäsche 15'",
-          "b0": "Gemischte Beladung",
-          "17": "Heruntergeladen",
           "69": "KI-Wäsche",
           "6a": "Wolle",
           "6b": "Jeansstoff",
@@ -680,8 +709,17 @@
           "77": "Baumwolle",
           "78": "Spülen + Schleudern",
           "79": "Nur Schleudern",
+          "7c": "Weißwäsche",
+          "7d": "Bettwäsche/Wasserdicht",
+          "7e": "Selbstreinigung",
+          "7f": "Wolle/Feinwäsche",
+          "86": "Tiefenreinigung",
+          "87": "Download",
           "88": "Tierpflege",
-          "35": "Eco Baumwolle"
+          "8f": "Kaltwäsche Intensiv",
+          "96": "Weniger Mikrofasern",
+          "a0": "Schnelle Wäsche 15'",
+          "b0": "Gemischte Beladung"
         }
       },
       "washer_dry_level": {
@@ -1484,11 +1522,12 @@
       },
       "settings": {
         "title": "Geräteeinstellungen",
-        "description": "Manche Geräte akzeptieren bestimmte Schreibvorgänge (z. B. die Standard-Dosierung von Waschmittel/Weichspüler bei einer Waschmaschine) auch dann, wenn sie melden, dass die Fernsteuerung ausgeschaltet ist. Standardmäßig blockiert LocalThings jeden Schreibvorgang mit einer klaren Fehlermeldung, sobald ein Gerät meldet, dass die Fernsteuerung ausgeschaltet ist, statt das Gerät den Vorgang stillschweigend ablehnen zu lassen. Aktivieren Sie dies nur, wenn Sie bestätigt haben, dass Schreibvorgänge bei diesem Gerät auch mit ausgeschalteter Fernsteuerung tatsächlich funktionieren -- andernfalls tauschen Sie die klare Fehlermeldung gegen ein stilles Fehlschlagen ein.\n\nDie voraussichtliche Fertigstellungszeit wird bei jeder Abfrage aus der verbleibenden Zeitschätzung des Geräts neu berechnet, die zwischen den Aktualisierungen um ein bis zwei Minuten schwanken oder korrigiert werden kann. Erhöhen Sie den unten stehenden Mindeständerungswert, um den Sensor bis zu einer Änderung der Schätzung um mindestens diese Anzahl an Minuten auf seinem zuletzt gemeldeten Wert zu halten und so das Rauschen in Verlauf/Logbuch zu verringern. Setzen Sie ihn auf 0, um jede berechnete Änderung zu melden.\n\nManche Modelle melden einen Modus, den sie nie als unterstützt angeben -- etwa eine Klimaanlage im Modus „Leise“, die nur Aus/Schlaf/Schnell anbietet. LocalThings merkt sich jeden solchen gemeldeten Modus und bietet ihn weiterhin an, sodass er auswählbar bleibt, sobald das Gerät mindestens einmal darin war. Schalten Sie dies aus, um nur das anzubieten, was das Gerät selbst angibt; verwenden Sie „Gemerkte Modi vergessen“ auf dem vorherigen Bildschirm, um bereits Gemerktes zu löschen.",
+        "description": "Manche Geräte akzeptieren bestimmte Schreibvorgänge (z. B. die Standard-Dosierung von Waschmittel/Weichspüler bei einer Waschmaschine) auch dann, wenn sie melden, dass die Fernsteuerung ausgeschaltet ist. Standardmäßig blockiert LocalThings jeden Schreibvorgang mit einer klaren Fehlermeldung, sobald ein Gerät meldet, dass die Fernsteuerung ausgeschaltet ist, statt das Gerät den Vorgang stillschweigend ablehnen zu lassen. Aktivieren Sie dies nur, wenn Sie bestätigt haben, dass Schreibvorgänge bei diesem Gerät auch mit ausgeschalteter Fernsteuerung tatsächlich funktionieren -- andernfalls tauschen Sie die klare Fehlermeldung gegen ein stilles Fehlschlagen ein.\n\nDie voraussichtliche Fertigstellungszeit wird bei jeder Abfrage aus der verbleibenden Zeitschätzung des Geräts neu berechnet, die zwischen den Aktualisierungen um ein bis zwei Minuten schwanken oder korrigiert werden kann. Erhöhen Sie den unten stehenden Mindeständerungswert, um den Sensor bis zu einer Änderung der Schätzung um mindestens diese Anzahl an Minuten auf seinem zuletzt gemeldeten Wert zu halten und so das Rauschen in Verlauf/Logbuch zu verringern. Setzen Sie ihn auf 0, um jede berechnete Änderung zu melden.\n\nManche Modelle melden einen Modus, den sie nie als unterstützt angeben -- etwa eine Klimaanlage im Modus „Leise“, die nur Aus/Schlaf/Schnell anbietet. LocalThings merkt sich jeden solchen gemeldeten Modus und bietet ihn weiterhin an, sodass er auswählbar bleibt, sobald das Gerät mindestens einmal darin war. Schalten Sie dies aus, um nur das anzubieten, was das Gerät selbst angibt; verwenden Sie „Gemerkte Modi vergessen“ auf dem vorherigen Bildschirm, um bereits Gemerktes zu löschen. Ein Wäschegerät mit aus der Cloud heruntergeladenen Programmen erhält hier eine Erinnerung, sobald es eines gemeldet hat, das Home Assistant noch nicht anbieten kann -- manche Geräte melden eines, auch wenn Sie den Bildschirm \"Download-Programme\" in der SmartThings-App nie selbst geöffnet haben. Schalten Sie dies aus, um diese Erinnerung zu stoppen und bereits benannte heruntergeladene Programme aus der Programmliste auszublenden; bereits Eingerichtetes geht dabei nicht verloren, und beim erneuten Einschalten erscheint es sofort wieder.",
         "data": {
           "bypass_remote_control_lock": "Schreibvorgänge auch bei ausgeschalteter Fernsteuerung zulassen",
           "finish_time_hysteresis_minutes": "Voraussichtliches Ende -- Mindeständerung (Minuten)",
-          "learn_device_modes": "Vom Gerät gemeldete, aber nicht angegebene Modi merken"
+          "learn_device_modes": "Vom Gerät gemeldete, aber nicht angegebene Modi merken",
+          "cloud_courses_enabled": "Heruntergeladene Programme anbieten"
         }
       },
       "debug_write": {
@@ -1519,14 +1558,14 @@
       },
       "cloud_manual": {
         "title": "Download-Programme",
-        "description": "Dieses Gerät meldet {total} heruntergeladene Programme; {found} davon wurden bisher erkannt.\n\nDie Einstellungen eines heruntergeladenen Programms sind nur sichtbar, während dieses Programm geladen ist, und das Gerät meldet nie deren Namen. Um die fehlenden ({pending}) hinzuzufügen: Wählen Sie am Gerät das Download-Programm aus, gehen Sie dann nacheinander jedes heruntergeladene Programm durch, halten Sie bei jedem ein paar Sekunden inne, und kommen Sie danach hierher zurück.\n\nGeben Sie jedem den Namen, den Sie in Home Assistant sehen möchten. Lassen Sie einen Namen leer, um das Programm aus der Programmliste auszuschließen. Namen müssen eindeutig sein.\n\nDas Download-Programm ist das Programm auf diesem Gerät, das ein heruntergeladenes Programm ausführt. Es wird automatisch erkannt, bestätigen Sie es aber hier vor der Verwendung: Die Auswahl eines heruntergeladenen Programms schreibt diesen Programmcode auf das Gerät.",
+        "description": "Dieses Gerät meldet {total} heruntergeladene Programme; {found} davon wurden bisher erkannt.\n\nDie Einstellungen eines heruntergeladenen Programms sind nur sichtbar, während dieses Programm geladen ist, und das Gerät meldet nie deren Namen. Um die fehlenden ({pending}) hinzuzufügen: Öffnen Sie in der SmartThings-App (nicht am Gerät selbst) dieses Gerät und tippen Sie auf \"Download-Programme\" -- eine eigene Zeile, getrennt von \"Programm\", weiter unten im Bildschirm, und die, auf die es hier ankommt. Gehen Sie dann nacheinander jedes heruntergeladene Programm durch, halten Sie bei jedem ein paar Sekunden inne, damit LocalThings es erkennen kann, und kommen Sie danach hierher zurück.\n\nGeben Sie jedem den Namen, den Sie in Home Assistant sehen möchten. Lassen Sie einen Namen leer, um das Programm aus der Programmliste auszuschließen. Namen müssen eindeutig sein.\n\nDas Download-Programm ist das Programm auf diesem Gerät, das ein heruntergeladenes Programm ausführt. Es wird automatisch erkannt, bestätigen Sie es aber hier vor der Verwendung: Die Auswahl eines heruntergeladenen Programms schreibt diesen Programmcode auf das Gerät.",
         "data": {
           "download_course": "Programmcode des Download-Programms"
         }
       },
       "cloud_courses": {
         "title": "Download-Programme",
-        "description": "Die geführte Einrichtung begleitet Sie am Gerät: Wählen Sie am Gerät ein heruntergeladenes Programm aus und benennen Sie es, sobald es gefunden wird – eines nach dem anderen.\n\nNamen bearbeiten zeigt alles bisher Gefundene auf einmal an – nutzen Sie es später, um etwas umzubenennen oder zu korrigieren.",
+        "description": "Die geführte Einrichtung begleitet Sie dabei: Öffnen Sie in der SmartThings-App (nicht am Gerät selbst) dieses Gerät und tippen Sie auf \"Download-Programme\" -- eine eigene Zeile, getrennt von \"Programm\", weiter unten im Bildschirm, und die, auf die es hier ankommt. Wählen Sie dort ein Programm aus, kommen Sie dann zurück und benennen Sie es, sobald es gefunden wird – eines nach dem anderen.\n\nNamen bearbeiten zeigt alles bisher Gefundene auf einmal an – nutzen Sie es später, um etwas umzubenennen oder zu korrigieren. Benennen funktioniert so oder so, aber ein benanntes Programm wird nur dann als auswählbares Programm angeboten, wenn \"Heruntergeladene Programme anbieten\" in den Geräteeinstellungen aktiviert ist.",
         "menu_options": {
           "cloud_guided": "Geführte Einrichtung",
           "cloud_manual": "Namen bearbeiten"
@@ -1537,7 +1576,7 @@
       },
       "cloud_name": {
         "title": "Dieses Programm benennen",
-        "description": "Das Gerät ist zu einem heruntergeladenen Programm gewechselt (Platz {slot}) und meldet eine verbleibende Zeit von {remaining}.\n\nGeben Sie den Namen ein, den Sie in Home Assistant sehen möchten, und wählen Sie dann am Gerät das nächste aus. Lassen Sie das Feld leer, um dieses Programm von der Liste auszuschließen.\n\nBisher benannt ({named} von {total}): {named_list}\n\nNamen müssen eindeutig sein. Sie können dieses Fenster jederzeit schließen – die Namen werden fortlaufend gespeichert.",
+        "description": "Der Platz \"Download-Programme\" des Geräts enthält jetzt ein neues Programm (Platz {slot}) und meldet eine verbleibende Zeit von {remaining}.\n\nGeben Sie den Namen ein, den Sie in Home Assistant sehen möchten, und wählen Sie dann im Bildschirm \"Download-Programme\" der SmartThings-App das nächste Programm aus, das noch nicht als \"Heruntergeladen\" markiert ist. Lassen Sie das Feld leer, um dieses Programm von der Liste auszuschließen.\n\nBisher benannt ({named} von {total}): {named_list}\n\nNamen müssen eindeutig sein. Sie können dieses Fenster jederzeit schließen – die Namen werden fortlaufend gespeichert.",
         "data": {
           "name": "Name",
           "download_course": "Programmcode des Download-Programms"
@@ -1545,7 +1584,7 @@
       },
       "cloud_timeout": {
         "title": "Kein Programm ausgewählt",
-        "description": "Am Gerät wurde nichts ausgewählt. Stellen Sie sicher, dass es auf das Download-Programm eingestellt ist, und gehen Sie dann die heruntergeladenen Programme durch.\n\nBisher benannt ({named} von {total}): {named_list}\n\nAlles bisher Benannte ist bereits gespeichert.",
+        "description": "Am Gerät hat sich nichts geändert. Stellen Sie sicher, dass Sie in der SmartThings-App auf \"Download-Programme\" getippt haben -- eine eigene Zeile, getrennt von \"Programm\", weiter unten im Bildschirm -- und ein Programm ausgewählt haben, das noch nicht als \"Heruntergeladen\" markiert war, und dann auf Fertig getippt haben.\n\nBisher benannt ({named} von {total}): {named_list}\n\nAlles bisher Benannte ist bereits gespeichert.",
         "menu_options": {
           "cloud_guided": "Erneut warten",
           "cloud_finish": "Fertig"
@@ -1562,7 +1601,7 @@
       "not_loaded": "Dieses Gerät ist noch nicht verbunden. Versuchen Sie es erneut, sobald es geladen wurde."
     },
     "progress": {
-      "cloud_wait": "Wählen Sie jetzt ein heruntergeladenes Programm am Gerät aus.\n\nBisher benannt ({named} von {total}): {named_list}\n\nSie können dieses Fenster jederzeit schließen – die Namen werden fortlaufend gespeichert."
+      "cloud_wait": "Öffnen Sie in der SmartThings-App (nicht am Gerät selbst) dieses Gerät und tippen Sie auf \"Download-Programme\" -- eine eigene Zeile, getrennt von \"Programm\", weiter unten im Bildschirm, die nur die Programme auflistet, die auf diese Weise erkannt werden können. Wählen Sie eines aus, das noch nicht als \"Heruntergeladen\" markiert ist, und tippen Sie auf Fertig.\n\nDas Gerät muss dafür nicht in der Nähe sein oder das Programm ausführen -- es muss nur eingeschaltet und verbunden sein.\n\nBisher benannt ({named} von {total}): {named_list}\n\nSie können dieses Fenster jederzeit schließen – die Namen werden fortlaufend gespeichert."
     }
   },
   "issues": {
@@ -1572,7 +1611,7 @@
     },
     "cloud_courses_undiscovered": {
       "title": "Heruntergeladene Programme für {device_name} nicht eingerichtet",
-      "description": "{device_name} hat {pending} von {total} heruntergeladenen Programmen, die Home Assistant noch nicht anbieten kann. Ein heruntergeladenes Programm kann erst verwendet werden, sobald das Gerät damit geladen gesehen wurde und Sie ihm einen Namen gegeben haben.\n\nUm sie einzurichten, gehen Sie zu Einstellungen > Geräte & Dienste > LocalThings > {device_name} > Konfigurieren > Download-Programme und folgen Sie den dortigen Anweisungen."
+      "description": "{device_name} hat {pending} von {total} heruntergeladenen Programmen, die Home Assistant noch nicht anbieten kann. Ein heruntergeladenes Programm kann erst verwendet werden, sobald das Gerät damit geladen gesehen wurde -- im Bildschirm \"Download-Programme\" der SmartThings-App, nicht im Bildschirm \"Programm\" -- und Sie ihm einen Namen gegeben haben.\n\nUm sie einzurichten, gehen Sie zu Einstellungen > Geräte & Dienste > LocalThings > {device_name} > Konfigurieren > Download-Programme und folgen Sie den dortigen Anweisungen.\n\nNutzen Sie keine heruntergeladenen Programme? Gehen Sie stattdessen zu Konfigurieren > Geräteeinstellungen und schalten Sie \"Heruntergeladene Programme anbieten\" aus, um diese Erinnerung dauerhaft zu stoppen."
     }
   },
   "exceptions": {

custom_components/localthings/translations/en.json

@@ -376,7 +376,25 @@
           "4c": "Air Refresh",
           "51": "Eco Cotton",
           "53": "AI Dry+",
-          "4e": "Self Dry"
+          "4e": "Self Dry",
+          "02": "AI Dry",
+          "03": "Super Speed",
+          "05": "Bedding",
+          "07": "Delicates",
+          "09": "Shirts",
+          "0b": "Padding Care",
+          "0c": "Outdoor Water-Repellent Care",
+          "0e": "Towels",
+          "0f": "Wool",
+          "11": "Cool air",
+          "28": "Interior Hot Air Sanitize",
+          "37": "Blouses",
+          "38": "Iron dry",
+          "39": "Room Dehumidify",
+          "3a": "Hygiene Care",
+          "3b": "Bedding/Dust Off",
+          "3c": "Activewear",
+          "3d": "Denim"
         }
       },
       "favorite_capacity": {
@@ -647,11 +665,31 @@
         "name": "Cycle",
         "state": {
           "01": "Normal",
+          "02": "Extra Heavy Duty",
+          "03": "Super Eco Wash",
           "04": "Quick Wash",
-          "06": "XXL Laundry",
+          "05": "Wool/Lingerie",
+          "06": "Bedding",
+          "07": "Outdoor",
           "08": "Rinse+Spin",
+          "09": "Drum Clean",
           "0a": "Towels",
+          "0b": "Boil Wash",
+          "0c": "Baby Care",
+          "0d": "Spin Only",
+          "0e": "Cloudy Day",
+          "0f": "Pure Wash",
+          "10": "Spin Dry",
+          "11": "Summer Bedding",
+          "12": "Cottons",
+          "13": "Black Cottons",
+          "14": "Delicate Underwear",
+          "15": "Activewear",
+          "16": "Blouses",
           "17": "Downloaded",
+          "18": "Soft Bubble",
+          "19": "AI Wash",
+          "1a": "Shirts",
           "1b": "Cotton",
           "1c": "Eco 40-60",
           "1d": "Super Speed",
@@ -1484,11 +1522,12 @@
       },
       "settings": {
         "title": "Device settings",
-        "description": "Some devices accept certain writes (e.g. default detergent/softener dosing on a washer) even while reporting remote control off. By default, LocalThings blocks every write with a clear error whenever a device reports remote control off, rather than letting the device silently reject it. Only enable this if you've confirmed writes actually work on this device with remote control off -- otherwise you'll trade that clear error for a silent failure.\n\nEstimated finish time is recomputed from the device's remaining-time estimate on every poll, which can drift or get revised by a minute or two between updates. Raise the minimum-change value below to hold the sensor at its last reported value until the estimate moves by at least that many minutes, cutting down on history/logbook noise. Set it to 0 to report every computed change.\n\nSome models report a mode they never list as supported -- an air conditioner sitting in Quiet that only offers Off/Sleep/Speed, for instance. LocalThings remembers any such mode it sees and keeps offering it, so it stays selectable once the device has been in it at least once. Turn this off to offer only what the device advertises; use \"Forget remembered modes\" on the previous screen to clear what has already been remembered.",
+        "description": "Some devices accept certain writes (e.g. default detergent/softener dosing on a washer) even while reporting remote control off. By default, LocalThings blocks every write with a clear error whenever a device reports remote control off, rather than letting the device silently reject it. Only enable this if you've confirmed writes actually work on this device with remote control off -- otherwise you'll trade that clear error for a silent failure.\n\nEstimated finish time is recomputed from the device's remaining-time estimate on every poll, which can drift or get revised by a minute or two between updates. Raise the minimum-change value below to hold the sensor at its last reported value until the estimate moves by at least that many minutes, cutting down on history/logbook noise. Set it to 0 to report every computed change.\n\nSome models report a mode they never list as supported -- an air conditioner sitting in Quiet that only offers Off/Sleep/Speed, for instance. LocalThings remembers any such mode it sees and keeps offering it, so it stays selectable once the device has been in it at least once. Turn this off to offer only what the device advertises; use \"Forget remembered modes\" on the previous screen to clear what has already been remembered.\n\nA laundry device with cloud-downloaded cycles gets a reminder here once it's reported one Home Assistant can't offer yet -- some devices report one even if you've never opened the SmartThings app's \"Download cycles\" screen yourself. Turn this off to stop that reminder and hide any already-named downloaded cycles from the cycle list; nothing already set up is lost, and turning it back on brings it right back.",
         "data": {
           "bypass_remote_control_lock": "Allow writes even when remote control is reported off",
           "finish_time_hysteresis_minutes": "Estimated finish -- minimum change (minutes)",
-          "learn_device_modes": "Remember modes the device reports but doesn't advertise"
+          "learn_device_modes": "Remember modes the device reports but doesn't advertise",
+          "cloud_courses_enabled": "Offer downloaded cycles"
         }
       },
       "forget_learned_modes": {
@@ -1519,14 +1558,14 @@
       },
       "cloud_manual": {
         "title": "Download cycles",
-        "description": "This appliance reports {total} downloaded cycle(s); {found} have been seen so far.\n\nA downloaded cycle's settings are only visible while that cycle is loaded, and the appliance never reports their names. To add the missing ones ({pending}): on the appliance, select the Download cycle, then step through each downloaded program in turn, pausing a few seconds on each, and come back here.\n\nGive each one the name you want to see in Home Assistant. Leave a name blank to keep that cycle out of the cycle list. Names must be unique.\n\nThe Download cycle is the course on this appliance that runs a downloaded program. It is detected automatically, but confirm it here before use: selecting a downloaded cycle writes this course code to the appliance.",
+        "description": "This appliance reports {total} downloaded cycle(s); {found} have been seen so far.\n\nA downloaded cycle's settings are only visible while that cycle is loaded, and the appliance never reports their names. To add the missing ones ({pending}): in the SmartThings app (not on the appliance itself), open this appliance and tap \"Download cycles\" -- a separate row from \"Cycle\", further down the screen, and the one that matters here. Step through each downloaded program in turn, pausing a few seconds on each so LocalThings can see it, then come back here.\n\nGive each one the name you want to see in Home Assistant. Leave a name blank to keep that cycle out of the cycle list. Names must be unique.\n\nThe Download cycle is the course on this appliance that runs a downloaded program. It is detected automatically, but confirm it here before use: selecting a downloaded cycle writes this course code to the appliance.",
         "data": {
           "download_course": "Download cycle course code"
         }
       },
       "cloud_courses": {
         "title": "Download cycles",
-        "description": "Guided setup walks the appliance with you: select a downloaded cycle on the appliance and name it as it's found, one at a time.\n\nEdit names shows everything found so far at once — use it to rename or correct something later.",
+        "description": "Guided setup walks you through it: in the SmartThings app (not on the appliance itself), open this appliance and tap \"Download cycles\" -- a separate row from \"Cycle\", further down the screen, and the one that matters here. Pick a cycle there, then come back and name it as it's found, one at a time.\n\nEdit names shows everything found so far at once — use it to rename or correct something later. Naming works either way, but a named cycle is only offered as a selectable cycle while \"Offer downloaded cycles\" is on in Device settings.",
         "menu_options": {
           "cloud_guided": "Guided setup",
           "cloud_manual": "Edit names"
@@ -1537,7 +1576,7 @@
       },
       "cloud_name": {
         "title": "Name this cycle",
-        "description": "The appliance switched to a downloaded cycle (slot {slot}) and reports {remaining} remaining.\n\nGive it the name you want to see in Home Assistant, then select the next one on the appliance. Leave it blank to keep this cycle out of the list.\n\nNamed so far ({named} of {total}): {named_list}\n\nNames must be unique. You can close this dialog whenever you like — names are saved as you go.",
+        "description": "The appliance's \"Download cycles\" slot now holds a new cycle (slot {slot}) and reports {remaining} remaining.\n\nGive it the name you want to see in Home Assistant, then in the SmartThings app's \"Download cycles\" screen pick the next one that isn't already marked \"Downloaded\". Leave it blank to keep this cycle out of the list.\n\nNamed so far ({named} of {total}): {named_list}\n\nNames must be unique. You can close this dialog whenever you like — names are saved as you go.",
         "data": {
           "name": "Name",
           "download_course": "Download cycle course code"
@@ -1545,7 +1584,7 @@
       },
       "cloud_timeout": {
         "title": "No cycle selected",
-        "description": "Nothing was selected on the appliance. Make sure it's set to the Download cycle, then step through the downloaded programs.\n\nNamed so far ({named} of {total}): {named_list}\n\nEverything named so far is already saved.",
+        "description": "Nothing changed on the appliance. Make sure you tapped \"Download cycles\" in the SmartThings app -- a separate row from \"Cycle\", further down the screen -- and picked one that wasn't already marked \"Downloaded\", then tapped Done.\n\nNamed so far ({named} of {total}): {named_list}\n\nEverything named so far is already saved.",
         "menu_options": {
           "cloud_guided": "Wait again",
           "cloud_finish": "Finish"
@@ -1562,7 +1601,7 @@
       "not_loaded": "This device isn't connected yet. Try again once it has loaded."
     },
     "progress": {
-      "cloud_wait": "Select a downloaded cycle on the appliance now.\n\nNamed so far ({named} of {total}): {named_list}\n\nYou can close this dialog at any time — names are saved as you go."
+      "cloud_wait": "In the SmartThings app (not on the appliance itself), open this appliance and tap \"Download cycles\" -- a separate row from \"Cycle\", further down the screen, that lists only the cycles this can detect. Pick one that isn't already marked \"Downloaded\", then tap Done.\n\nThe appliance doesn't need to be nearby or running the cycle -- just powered on and connected.\n\nNamed so far ({named} of {total}): {named_list}\n\nYou can close this dialog at any time — names are saved as you go."
     }
   },
   "issues": {
@@ -1572,7 +1611,7 @@
     },
     "cloud_courses_undiscovered": {
       "title": "Downloaded cycles not set up for {device_name}",
-      "description": "{device_name} has {pending} of {total} downloaded cycle(s) that Home Assistant can't offer yet. A downloaded cycle can only be used once the appliance has been seen with it loaded and you've given it a name.\n\nTo set them up, go to Settings > Devices & Services > LocalThings > {device_name} > Configure > Download cycles and follow the instructions there."
+      "description": "{device_name} has {pending} of {total} downloaded cycle(s) that Home Assistant can't offer yet. A downloaded cycle can only be used once the appliance has been seen with it loaded -- in the SmartThings app's \"Download cycles\" screen, not the \"Cycle\" one -- and you've given it a name.\n\nTo set them up, go to Settings > Devices & Services > LocalThings > {device_name} > Configure > Download cycles and follow the instructions there.\n\nDon't use downloaded cycles? Go to Configure > Device settings instead and turn off \"Offer downloaded cycles\" to silence this reminder for good."
     }
   },
   "exceptions": {

custom_components/localthings/translations/es.json

@@ -60,11 +60,12 @@
       },
       "settings": {
         "title": "Ajustes del dispositivo",
-        "description": "Algunos dispositivos aceptan ciertas escrituras (p. ej. la dosificación por defecto de detergente/suavizante en una lavadora) incluso cuando informan de control remoto desactivado. Por defecto, LocalThings bloquea cada escritura con un error claro cuando un dispositivo informa de control remoto desactivado, en lugar de dejar que el dispositivo la rechace en silencio. Solo actívalo si has confirmado que las escrituras funcionan de verdad en este dispositivo con el control remoto desactivado; si no, cambiarás ese error claro por un fallo silencioso.\n\nLa hora estimada de finalización se recalcula a partir de la estimación de tiempo restante del dispositivo en cada sondeo, que puede variar o revisarse uno o dos minutos entre actualizaciones. Sube el valor de cambio mínimo siguiente para mantener el sensor en su último valor notificado hasta que la estimación varíe al menos esa cantidad de minutos, reduciendo el ruido en el historial/registro de actividad. Ponlo a 0 para notificar cada cambio calculado.\n\nAlgunos modelos notifican un modo que nunca incluyen entre los admitidos: por ejemplo, un aire acondicionado en modo Quiet que solo ofrece Off/Sleep/Speed. LocalThings recuerda cualquier modo así que detecte y lo sigue ofreciendo, de modo que quede seleccionable en cuanto el dispositivo haya estado en él al menos una vez. Desactívalo para ofrecer solo lo que el dispositivo anuncia; usa «Olvidar los modos recordados» en la pantalla anterior para borrar lo ya recordado.",
+        "description": "Algunos dispositivos aceptan ciertas escrituras (p. ej. la dosificación por defecto de detergente/suavizante en una lavadora) incluso cuando informan de control remoto desactivado. Por defecto, LocalThings bloquea cada escritura con un error claro cuando un dispositivo informa de control remoto desactivado, en lugar de dejar que el dispositivo la rechace en silencio. Solo actívalo si has confirmado que las escrituras funcionan de verdad en este dispositivo con el control remoto desactivado; si no, cambiarás ese error claro por un fallo silencioso.\n\nLa hora estimada de finalización se recalcula a partir de la estimación de tiempo restante del dispositivo en cada sondeo, que puede variar o revisarse uno o dos minutos entre actualizaciones. Sube el valor de cambio mínimo siguiente para mantener el sensor en su último valor notificado hasta que la estimación varíe al menos esa cantidad de minutos, reduciendo el ruido en el historial/registro de actividad. Ponlo a 0 para notificar cada cambio calculado.\n\nAlgunos modelos notifican un modo que nunca incluyen entre los admitidos: por ejemplo, un aire acondicionado en modo Quiet que solo ofrece Off/Sleep/Speed. LocalThings recuerda cualquier modo así que detecte y lo sigue ofreciendo, de modo que quede seleccionable en cuanto el dispositivo haya estado en él al menos una vez. Desactívalo para ofrecer solo lo que el dispositivo anuncia; usa «Olvidar los modos recordados» en la pantalla anterior para borrar lo ya recordado. Un dispositivo de lavandería con ciclos descargados de la nube recibe aquí un aviso en cuanto informa de uno que Home Assistant aún no puede ofrecer -- algunos dispositivos informan de uno incluso si nunca has abierto tú mismo la pantalla \"Descarga de Programas\" de la app SmartThings. Desactiva esto para detener ese aviso y ocultar los ciclos descargados ya nombrados de la lista de ciclos; no se pierde nada de lo ya configurado, y al volver a activarlo reaparece de inmediato.",
         "data": {
           "bypass_remote_control_lock": "Permitir escrituras incluso cuando el control remoto se notifica como desactivado",
           "finish_time_hysteresis_minutes": "Finalización estimada -- cambio mínimo (minutos)",
-          "learn_device_modes": "Recordar los modos que el dispositivo notifica pero no anuncia"
+          "learn_device_modes": "Recordar los modos que el dispositivo notifica pero no anuncia",
+          "cloud_courses_enabled": "Ofrecer ciclos descargados"
         }
       },
       "forget_learned_modes": {
@@ -95,14 +96,14 @@
       },
       "cloud_manual": {
         "title": "Ciclos descargados",
-        "description": "Este dispositivo informa de {total} ciclos descargados; se han detectado {found} hasta ahora.\n\nLos ajustes de un ciclo descargado solo son visibles mientras ese ciclo está cargado, y el dispositivo nunca informa de sus nombres. Para añadir los que faltan ({pending}): en el dispositivo, selecciona Descarga de Programas y ve pasando por cada programa descargado uno a uno, deteniéndote unos segundos en cada uno, y vuelve aquí.\n\nDa a cada uno el nombre que quieras ver en Home Assistant. Deja un nombre en blanco para mantener ese ciclo fuera de la lista de ciclos. Los nombres deben ser únicos.\n\nDescarga de Programas es el programa de este dispositivo que ejecuta un ciclo descargado. Se detecta automáticamente, pero confírmalo aquí antes de usarlo: seleccionar un ciclo descargado escribe este código de programa en el dispositivo.",
+        "description": "Este dispositivo informa de {total} ciclos descargados; se han detectado {found} hasta ahora.\n\nLos ajustes de un ciclo descargado solo son visibles mientras ese ciclo está cargado, y el dispositivo nunca informa de sus nombres. Para añadir los que faltan ({pending}): en la app SmartThings (no en el dispositivo), abre este dispositivo y toca \"Descarga de Programas\" -- una fila aparte de \"Ciclo\", más abajo en la pantalla, y la que importa aquí. Ve pasando por cada programa descargado uno a uno, deteniéndote unos segundos en cada uno para que LocalThings pueda detectarlo, y vuelve aquí.\n\nDa a cada uno el nombre que quieras ver en Home Assistant. Deja un nombre en blanco para mantener ese ciclo fuera de la lista de ciclos. Los nombres deben ser únicos.\n\nDescarga de Programas es el programa de este dispositivo que ejecuta un ciclo descargado. Se detecta automáticamente, pero confírmalo aquí antes de usarlo: seleccionar un ciclo descargado escribe este código de programa en el dispositivo.",
         "data": {
           "download_course": "Código de programa de Descarga de Programas"
         }
       },
       "cloud_courses": {
         "title": "Ciclos descargados",
-        "description": "La configuración guiada te acompaña con el dispositivo: selecciona un ciclo descargado en el dispositivo y ponle nombre en cuanto se detecte, uno por uno.\n\nEditar nombres muestra todo lo encontrado hasta ahora de una vez — úsalo más adelante para renombrar o corregir algo.",
+        "description": "La configuración guiada te acompaña: en la app SmartThings (no en el dispositivo), abre este dispositivo y toca \"Descarga de Programas\" -- una fila aparte de \"Ciclo\", más abajo en la pantalla, y la que importa aquí. Elige un ciclo allí, vuelve aquí y ponle nombre en cuanto se detecte, uno por uno.\n\nEditar nombres muestra todo lo encontrado hasta ahora de una vez — úsalo más adelante para renombrar o corregir algo. Nombrar funciona en cualquier caso, pero un ciclo con nombre solo se ofrece como ciclo seleccionable mientras \"Ofrecer ciclos descargados\" esté activado en los ajustes del dispositivo.",
         "menu_options": {
           "cloud_guided": "Configuración guiada",
           "cloud_manual": "Editar nombres"
@@ -113,7 +114,7 @@
       },
       "cloud_name": {
         "title": "Nombra este ciclo",
-        "description": "El dispositivo cambió a un ciclo descargado (ranura {slot}) e informa de {remaining} restantes.\n\nDale el nombre que quieras ver en Home Assistant y luego selecciona el siguiente en el dispositivo. Déjalo en blanco para mantener este ciclo fuera de la lista.\n\nNombrados hasta ahora ({named} de {total}): {named_list}\n\nLos nombres deben ser únicos. Puedes cerrar este cuadro de diálogo cuando quieras — los nombres se guardan sobre la marcha.",
+        "description": "La ranura \"Descarga de Programas\" del dispositivo ahora tiene un ciclo nuevo (ranura {slot}) e informa de {remaining} restantes.\n\nDale el nombre que quieras ver en Home Assistant y luego, en la pantalla \"Descarga de Programas\" de la app SmartThings, elige el siguiente que no esté ya marcado como \"Descargado\". Déjalo en blanco para mantener este ciclo fuera de la lista.\n\nNombrados hasta ahora ({named} de {total}): {named_list}\n\nLos nombres deben ser únicos. Puedes cerrar este cuadro de diálogo cuando quieras — los nombres se guardan sobre la marcha.",
         "data": {
           "name": "Nombre",
           "download_course": "Código de programa de Descarga de Programas"
@@ -121,7 +122,7 @@
       },
       "cloud_timeout": {
         "title": "No se seleccionó ningún ciclo",
-        "description": "No se seleccionó nada en el dispositivo. Asegúrate de que esté puesto en Descarga de Programas y luego ve pasando por los programas descargados.\n\nNombrados hasta ahora ({named} de {total}): {named_list}\n\nTodo lo nombrado hasta ahora ya está guardado.",
+        "description": "No ha cambiado nada en el dispositivo. Asegúrate de haber tocado \"Descarga de Programas\" en la app SmartThings -- una fila aparte de \"Ciclo\", más abajo en la pantalla -- y de haber elegido uno que no estuviera ya marcado como \"Descargado\", y luego tocado Hecho.\n\nNombrados hasta ahora ({named} de {total}): {named_list}\n\nTodo lo nombrado hasta ahora ya está guardado.",
         "menu_options": {
           "cloud_guided": "Esperar de nuevo",
           "cloud_finish": "Finalizar"
@@ -138,7 +139,7 @@
       "not_loaded": "Este dispositivo aún no está conectado. Inténtalo de nuevo cuando se haya cargado."
     },
     "progress": {
-      "cloud_wait": "Selecciona ahora un ciclo descargado en el dispositivo.\n\nNombrados hasta ahora ({named} de {total}): {named_list}\n\nPuedes cerrar este cuadro de diálogo en cualquier momento — los nombres se guardan sobre la marcha."
+      "cloud_wait": "En la app SmartThings (no en el dispositivo), abre este dispositivo y toca \"Descarga de Programas\" -- una fila aparte de \"Ciclo\", más abajo en la pantalla, que solo lista los ciclos que se pueden detectar así. Elige uno que no esté ya marcado como \"Descargado\" y toca Hecho.\n\nEl dispositivo no necesita estar cerca ni ejecutando el ciclo -- solo encendido y conectado.\n\nNombrados hasta ahora ({named} de {total}): {named_list}\n\nPuedes cerrar este cuadro de diálogo en cualquier momento — los nombres se guardan sobre la marcha."
     }
   },
   "issues": {
@@ -148,7 +149,7 @@
     },
     "cloud_courses_undiscovered": {
       "title": "Ciclos descargados sin configurar para {device_name}",
-      "description": "{device_name} tiene {pending} de {total} ciclos descargados que Home Assistant todavía no puede ofrecer. Un ciclo descargado solo se puede usar una vez que el dispositivo se ha visto con él cargado y le has dado un nombre.\n\nPara configurarlos, ve a Ajustes > Dispositivos y servicios > LocalThings > {device_name} > Configurar > Ciclos descargados y sigue las instrucciones que aparecen allí."
+      "description": "{device_name} tiene {pending} de {total} ciclos descargados que Home Assistant todavía no puede ofrecer. Un ciclo descargado solo se puede usar una vez que el dispositivo se ha visto con él cargado -- en la pantalla \"Descarga de Programas\" de la app SmartThings, no en la de \"Ciclo\" -- y le has dado un nombre.\n\nPara configurarlos, ve a Ajustes > Dispositivos y servicios > LocalThings > {device_name} > Configurar > Ciclos descargados y sigue las instrucciones que aparecen allí.\n\n¿No usas ciclos descargados? Ve a Configurar > Ajustes del dispositivo y desactiva \"Ofrecer ciclos descargados\" para silenciar este aviso definitivamente."
     }
   },
   "exceptions": {
@@ -572,7 +573,25 @@
           "53": "Secado IA+",
           "4e": "Autosecado",
           "26": "Aireación",
-          "2a": "Cuidado higiénico+"
+          "2a": "Cuidado higiénico+",
+          "02": "Secado IA",
+          "03": "Súper velocidad",
+          "05": "Ropa de cama",
+          "07": "Delicados",
+          "09": "Camisas",
+          "0b": "Cuidado de acolchados",
+          "0c": "Cuidado hidrófugo para exterior",
+          "0e": "Toallas",
+          "0f": "Lana",
+          "11": "Aire frío",
+          "28": "Desinfección interior con aire caliente",
+          "37": "Blusas",
+          "38": "Planchado fácil",
+          "39": "Deshumidificación de habitación",
+          "3a": "Cuidado higiénico",
+          "3b": "Ropa de cama/Antipolvo",
+          "3c": "Ropa deportiva",
+          "3d": "Denim"
         }
       },
       "favorite_capacity": {
@@ -843,11 +862,31 @@
         "name": "Ciclo",
         "state": {
           "01": "Normal",
+          "02": "Servicio Extra Intensivo",
+          "03": "Super Eco",
           "04": "Lavado rápido",
-          "06": "Colada XXL",
+          "05": "Lana/Lencería",
+          "06": "Ropa de cama",
+          "07": "Exterior",
           "08": "Aclarar + Centrifugar",
+          "09": "Limpieza de Tambor",
           "0a": "Toallas",
+          "0b": "Lavado a ebullición",
+          "0c": "Cuidado del bebé",
+          "0d": "Solo centrifugar",
+          "0e": "Día nublado",
+          "0f": "Lavado puro",
+          "10": "Secado-centrifugado",
+          "11": "Ropa de cama de verano",
+          "12": "Algodón",
+          "13": "Algodón negro",
+          "14": "Ropa interior delicada",
+          "15": "Ropa deportiva",
+          "16": "Blusas",
           "17": "Descargado",
+          "18": "Burbuja suave",
+          "19": "Lavado IA",
+          "1a": "Camisas",
           "1b": "Algodón",
           "1c": "Eco 40-60",
           "1d": "Súper velocidad",
@@ -872,6 +911,7 @@
           "32": "Camisas",
           "33": "Toallas",
           "34": "Mezcla",
+          "35": "Algodón E",
           "36": "Lavado + Secado",
           "37": "Lavado con aire",
           "38": "Secado de algodón",
@@ -886,16 +926,6 @@
           "60": "Autolimpieza+",
           "65": "Color",
           "66": "Denim",
-          "7c": "Blancos",
-          "7d": "Ropa de cama / Impermeable",
-          "7e": "Autolimpieza",
-          "7f": "Lana / Delicados",
-          "86": "Lavado profundo",
-          "87": "Descarga de Programas",
-          "8f": "Lavado en frío",
-          "96": "Menos microfibras",
-          "a0": "Lavado rápido 15'",
-          "b0": "Carga mixta",
           "69": "Lavado IA",
           "6a": "Lana",
           "6b": "Denim",
@@ -913,8 +943,17 @@
           "77": "Algodón",
           "78": "Aclarar + Centrifugar",
           "79": "Solo centrifugar",
+          "7c": "Blancos",
+          "7d": "Ropa de cama / Impermeable",
+          "7e": "Autolimpieza",
+          "7f": "Lana / Delicados",
+          "86": "Lavado profundo",
+          "87": "Descarga de Programas",
           "88": "Cuidado de mascotas",
-          "35": "Algodón E"
+          "8f": "Lavado en frío",
+          "96": "Menos microfibras",
+          "a0": "Lavado rápido 15'",
+          "b0": "Carga mixta"
         }
       },
       "washer_dry_level": {

custom_components/localthings/translations/it.json

@@ -376,7 +376,25 @@
           "53": "Asciugatura AI+",
           "4e": "Autoasciugatura",
           "26": "Arieggiatura",
-          "2a": "Cura igienica+"
+          "2a": "Cura igienica+",
+          "02": "Asciugatura AI",
+          "03": "Super Speed",
+          "05": "Biancheria da letto",
+          "07": "Delicati",
+          "09": "Camicie",
+          "0b": "Cura piumini",
+          "0c": "Cura idrorepellente outdoor",
+          "0e": "Asciugamani",
+          "0f": "Lana",
+          "11": "Aria fredda",
+          "28": "Sanificazione interna ad aria calda",
+          "37": "Camicette",
+          "38": "Pronto da stirare",
+          "39": "Deumidificazione ambiente",
+          "3a": "Cura igienica",
+          "3b": "Biancheria da letto/Antipolvere",
+          "3c": "Abbigliamento sportivo",
+          "3d": "Jeans"
         }
       },
       "favorite_capacity": {
@@ -647,11 +665,31 @@
         "name": "Ciclo",
         "state": {
           "01": "Normale",
+          "02": "Extra Intenso",
+          "03": "Super Eco",
           "04": "Lavaggio rapido",
-          "06": "Bucato XXL",
+          "05": "Lana/Lingerie",
+          "06": "Biancheria da letto",
+          "07": "Capi outdoor",
           "08": "Risciacquo+Centrifuga",
+          "09": "Pulizia cestello",
           "0a": "Asciugamani",
+          "0b": "Lavaggio a ebollizione",
+          "0c": "Bambini",
+          "0d": "Solo centrifuga",
+          "0e": "Giornata nuvolosa",
+          "0f": "Lavaggio puro",
+          "10": "Asciugatura centrifuga",
+          "11": "Biancheria da letto estiva",
+          "12": "Cotone",
+          "13": "Cotone nero",
+          "14": "Biancheria intima delicata",
+          "15": "Abbigliamento sportivo",
+          "16": "Camicette",
           "17": "Scaricato",
+          "18": "Soft Bubble",
+          "19": "Lavaggio AI",
+          "1a": "Camicie",
           "1b": "Cotone",
           "1c": "Eco 40-60",
           "1d": "Super Speed",
@@ -676,6 +714,7 @@
           "32": "Camicie",
           "33": "Asciugamani",
           "34": "Misti",
+          "35": "Cotone E",
           "36": "Lavaggio+Asciugatura",
           "37": "Lavaggio ad aria",
           "38": "Asciugatura cotone",
@@ -690,14 +729,6 @@
           "60": "Self Clean+",
           "65": "Colorati",
           "66": "Jeans",
-          "7c": "Bianchi",
-          "7d": "Biancheria da letto/Impermeabile",
-          "7e": "Pulizia cestello",
-          "7f": "Lana/Delicati",
-          "86": "Lavaggio profondo",
-          "87": "Scaricato",
-          "8f": "Intenso a freddo",
-          "96": "Riduci microfibre",
           "69": "Lavaggio AI",
           "6a": "Lana",
           "6b": "Jeans",
@@ -715,8 +746,15 @@
           "77": "Cotone",
           "78": "Risciacquo+Centrifuga",
           "79": "Solo centrifuga",
+          "7c": "Bianchi",
+          "7d": "Biancheria da letto/Impermeabile",
+          "7e": "Pulizia cestello",
+          "7f": "Lana/Delicati",
+          "86": "Lavaggio profondo",
+          "87": "Scaricato",
           "88": "Cura animali",
-          "35": "Cotone E",
+          "8f": "Intenso a freddo",
+          "96": "Riduci microfibre",
           "a0": "Rapido 15'",
           "b0": "Carico misto"
         }
@@ -1484,11 +1522,12 @@
       },
       "settings": {
         "title": "Impostazioni dispositivo",
-        "description": "Alcuni dispositivi accettano determinate scritture (ad esempio, il dosaggio predefinito di detersivo/ammorbidente su una lavatrice) anche quando segnalano che il controllo remoto è disattivato. Per impostazione predefinita, LocalThings blocca ogni scrittura con un errore chiaro ogni volta che un dispositivo segnala che il controllo remoto è disattivato, invece di consentire al dispositivo di rifiutarla silenziosamente. Abilitare questa opzione solo se si è verificato che le scritture funzionano effettivamente su questo dispositivo con il controllo remoto disattivato; in caso contrario, si sostituirà l'errore chiaro con un errore silenzioso.\n\nIl tempo di fine stimato viene ricalcolato dalla stima del tempo rimanente del dispositivo a ogni interrogazione, che può variare o essere rivista di uno o due minuti tra un aggiornamento e l'altro. Aumentare il valore di variazione minima riportato di seguito per mantenere il sensore al suo ultimo valore segnalato finché la stima non si sposta di almeno quel numero di minuti, riducendo il rumore nella cronologia/registro. Impostarlo su 0 per segnalare ogni variazione calcolata.\n\nAlcuni modelli segnalano una modalità che non elencano mai tra quelle supportate: ad esempio un condizionatore in modalità Quiet che offre solo Off/Sleep/Speed. LocalThings memorizza ogni modalità di questo tipo che rileva e continua a proporla, così resta selezionabile una volta che il dispositivo vi è stato almeno una volta. Disattivare questa opzione per proporre solo ciò che il dispositivo dichiara; usare «Dimentica le modalità memorizzate» nella schermata precedente per cancellare quanto già memorizzato.",
+        "description": "Alcuni dispositivi accettano determinate scritture (ad esempio, il dosaggio predefinito di detersivo/ammorbidente su una lavatrice) anche quando segnalano che il controllo remoto è disattivato. Per impostazione predefinita, LocalThings blocca ogni scrittura con un errore chiaro ogni volta che un dispositivo segnala che il controllo remoto è disattivato, invece di consentire al dispositivo di rifiutarla silenziosamente. Abilitare questa opzione solo se si è verificato che le scritture funzionano effettivamente su questo dispositivo con il controllo remoto disattivato; in caso contrario, si sostituirà l'errore chiaro con un errore silenzioso.\n\nIl tempo di fine stimato viene ricalcolato dalla stima del tempo rimanente del dispositivo a ogni interrogazione, che può variare o essere rivista di uno o due minuti tra un aggiornamento e l'altro. Aumentare il valore di variazione minima riportato di seguito per mantenere il sensore al suo ultimo valore segnalato finché la stima non si sposta di almeno quel numero di minuti, riducendo il rumore nella cronologia/registro. Impostarlo su 0 per segnalare ogni variazione calcolata.\n\nAlcuni modelli segnalano una modalità che non elencano mai tra quelle supportate: ad esempio un condizionatore in modalità Quiet che offre solo Off/Sleep/Speed. LocalThings memorizza ogni modalità di questo tipo che rileva e continua a proporla, così resta selezionabile una volta che il dispositivo vi è stato almeno una volta. Disattivare questa opzione per proporre solo ciò che il dispositivo dichiara; usare «Dimentica le modalità memorizzate» nella schermata precedente per cancellare quanto già memorizzato. Un dispositivo per il bucato con cicli scaricati dal cloud riceve qui un promemoria non appena ne segnala uno che Home Assistant non può ancora offrire -- alcuni dispositivi ne segnalano uno anche se non è mai stata aperta la schermata \"Cicli scaricati\" dell'app SmartThings. Disattivarlo per interrompere il promemoria e nascondere dall'elenco dei cicli quelli scaricati già nominati; nulla di quanto già configurato va perso, e riattivandolo riappare subito.",
         "data": {
           "bypass_remote_control_lock": "Consenti la scrittura anche quando il controllo remoto risulta disattivato.",
           "finish_time_hysteresis_minutes": "Tempo finale stimato - variazione minima (minuti)",
-          "learn_device_modes": "Memorizza le modalità che il dispositivo segnala ma non dichiara supportate"
+          "learn_device_modes": "Memorizza le modalità che il dispositivo segnala ma non dichiara supportate",
+          "cloud_courses_enabled": "Offri cicli scaricati"
         }
       },
       "forget_learned_modes": {
@@ -1519,14 +1558,14 @@
       },
       "cloud_manual": {
         "title": "Cicli scaricati",
-        "description": "Questo dispositivo segnala {total} cicli scaricati; finora ne sono stati rilevati {found}.\n\nLe impostazioni di un ciclo scaricato sono visibili solo mentre quel ciclo è caricato, e il dispositivo non ne segnala mai il nome. Per aggiungere quelli mancanti ({pending}): sul dispositivo selezionare il ciclo Scaricato, quindi scorrere ciascun programma scaricato uno alla volta, sostando qualche secondo su ognuno, e tornare qui.\n\nAssegnare a ciascuno il nome che si desidera vedere in Home Assistant. Lasciare un nome vuoto per escludere quel ciclo dall'elenco dei cicli. I nomi devono essere univoci.\n\nIl ciclo Scaricato è il programma su questo dispositivo che esegue un programma scaricato. Viene rilevato automaticamente, ma confermarlo qui prima dell'uso: selezionare un ciclo scaricato scrive questo codice di programma sul dispositivo.",
+        "description": "Questo dispositivo segnala {total} cicli scaricati; finora ne sono stati rilevati {found}.\n\nLe impostazioni di un ciclo scaricato sono visibili solo mentre quel ciclo è caricato, e il dispositivo non ne segnala mai il nome. Per aggiungere quelli mancanti ({pending}): nell'app SmartThings (non sul dispositivo), aprire questo dispositivo e toccare \"Cicli scaricati\" -- una riga separata da \"Ciclo\", più in basso nella schermata, ed è quella che conta qui. Scorrere ciascun programma scaricato uno alla volta, sostando qualche secondo su ognuno perché LocalThings possa rilevarlo, e tornare qui.\n\nAssegnare a ciascuno il nome che si desidera vedere in Home Assistant. Lasciare un nome vuoto per escludere quel ciclo dall'elenco dei cicli. I nomi devono essere univoci.\n\nIl ciclo Scaricato è il programma su questo dispositivo che esegue un programma scaricato. Viene rilevato automaticamente, ma confermarlo qui prima dell'uso: selezionare un ciclo scaricato scrive questo codice di programma sul dispositivo.",
         "data": {
           "download_course": "Codice programma del ciclo Scaricato"
         }
       },
       "cloud_courses": {
         "title": "Cicli scaricati",
-        "description": "La configurazione guidata accompagna l'utente al dispositivo: selezionare un ciclo scaricato sul dispositivo e assegnargli un nome non appena viene rilevato, uno alla volta.\n\nModifica nomi mostra tutto ciò che è stato trovato finora in una sola volta — usarla in seguito per rinominare o correggere qualcosa.",
+        "description": "La configurazione guidata accompagna l'utente: nell'app SmartThings (non sul dispositivo), aprire questo dispositivo e toccare \"Cicli scaricati\" -- una riga separata da \"Ciclo\", più in basso nella schermata, ed è quella che conta qui. Scegliere un ciclo lì, poi tornare qui e assegnargli un nome non appena viene rilevato, uno alla volta.\n\nModifica nomi mostra tutto ciò che è stato trovato finora in una sola volta — usarla in seguito per rinominare o correggere qualcosa. Assegnare un nome funziona comunque, ma un ciclo con nome viene offerto come ciclo selezionabile solo quando \"Offri cicli scaricati\" è attivo nelle impostazioni del dispositivo.",
         "menu_options": {
           "cloud_guided": "Configurazione guidata",
           "cloud_manual": "Modifica nomi"
@@ -1537,7 +1576,7 @@
       },
       "cloud_name": {
         "title": "Assegna un nome a questo ciclo",
-        "description": "Il dispositivo è passato a un ciclo scaricato (slot {slot}) e segnala {remaining} rimanenti.\n\nAssegnargli il nome che si desidera vedere in Home Assistant, quindi selezionare il successivo sul dispositivo. Lasciare vuoto per escludere questo ciclo dall'elenco.\n\nAssegnati finora ({named} di {total}): {named_list}\n\nI nomi devono essere univoci. È possibile chiudere questa finestra in qualsiasi momento — i nomi vengono salvati man mano.",
+        "description": "Lo slot \"Cicli scaricati\" del dispositivo ora contiene un nuovo ciclo (slot {slot}) e segnala {remaining} rimanenti.\n\nAssegnargli il nome che si desidera vedere in Home Assistant, quindi nella schermata \"Cicli scaricati\" dell'app SmartThings scegliere il successivo non ancora contrassegnato come \"Scaricato\". Lasciare vuoto per escludere questo ciclo dall'elenco.\n\nAssegnati finora ({named} di {total}): {named_list}\n\nI nomi devono essere univoci. È possibile chiudere questa finestra in qualsiasi momento — i nomi vengono salvati man mano.",
         "data": {
           "name": "Nome",
           "download_course": "Codice programma del ciclo Scaricato"
@@ -1545,7 +1584,7 @@
       },
       "cloud_timeout": {
         "title": "Nessun ciclo selezionato",
-        "description": "Non è stato selezionato nulla sul dispositivo. Assicurarsi che sia impostato sul ciclo Scaricato, quindi scorrere i programmi scaricati.\n\nAssegnati finora ({named} di {total}): {named_list}\n\nTutto ciò che è stato assegnato finora è già salvato.",
+        "description": "Non è cambiato nulla sul dispositivo. Assicurarsi di aver toccato \"Cicli scaricati\" nell'app SmartThings -- una riga separata da \"Ciclo\", più in basso nella schermata -- e di aver scelto un ciclo non ancora contrassegnato come \"Scaricato\", quindi di aver toccato Fine.\n\nAssegnati finora ({named} di {total}): {named_list}\n\nTutto ciò che è stato assegnato finora è già salvato.",
         "menu_options": {
           "cloud_guided": "Attendi di nuovo",
           "cloud_finish": "Fine"
@@ -1562,7 +1601,7 @@
       "not_loaded": "Questo dispositivo non è ancora connesso. Riprova dopo il caricamento."
     },
     "progress": {
-      "cloud_wait": "Selezionare ora un ciclo scaricato sul dispositivo.\n\nAssegnati finora ({named} di {total}): {named_list}\n\nÈ possibile chiudere questa finestra in qualsiasi momento — i nomi vengono salvati man mano."
+      "cloud_wait": "Nell'app SmartThings (non sul dispositivo), aprire questo dispositivo e toccare \"Cicli scaricati\" -- una riga separata da \"Ciclo\", più in basso nella schermata, che elenca solo i cicli rilevabili in questo modo. Scegliere uno non ancora contrassegnato come \"Scaricato\", quindi toccare Fine.\n\nIl dispositivo non deve essere nelle vicinanze né in esecuzione -- deve solo essere acceso e connesso.\n\nAssegnati finora ({named} di {total}): {named_list}\n\nÈ possibile chiudere questa finestra in qualsiasi momento — i nomi vengono salvati man mano."
     }
   },
   "issues": {
@@ -1572,7 +1611,7 @@
     },
     "cloud_courses_undiscovered": {
       "title": "Cicli scaricati non configurati per {device_name}",
-      "description": "{device_name} ha {pending} cicli scaricati su {total} che Home Assistant non può ancora offrire. Un ciclo scaricato può essere usato solo dopo che il dispositivo è stato rilevato con quel ciclo caricato ed è stato assegnato un nome.\n\nPer configurarli, andare su Impostazioni > Dispositivi e servizi > LocalThings > {device_name} > Configura > Cicli scaricati e seguire le istruzioni presenti lì."
+      "description": "{device_name} ha {pending} cicli scaricati su {total} che Home Assistant non può ancora offrire. Un ciclo scaricato può essere usato solo dopo che il dispositivo è stato rilevato con quel ciclo caricato -- nella schermata \"Cicli scaricati\" dell'app SmartThings, non in quella \"Ciclo\" -- ed è stato assegnato un nome.\n\nPer configurarli, andare su Impostazioni > Dispositivi e servizi > LocalThings > {device_name} > Configura > Cicli scaricati e seguire le istruzioni presenti lì.\n\nNon si usano cicli scaricati? Andare invece su Configura > Impostazioni dispositivo e disattivare \"Offri cicli scaricati\" per silenziare questo promemoria definitivamente."
     }
   },
   "exceptions": {

custom_components/localthings/translations/ko.json

@@ -376,7 +376,25 @@
           "53": "AI 맞춤건조+",
           "4e": "자체 건조",
           "26": "송풍",
-          "2a": "살균건조+"
+          "2a": "살균건조+",
+          "02": "AI 맞춤건조",
+          "03": "쾌속건조",
+          "05": "이불",
+          "07": "섬세의류",
+          "09": "셔츠",
+          "0b": "패딩케어",
+          "0c": "아웃도어발수케어",
+          "0e": "타월",
+          "0f": "울",
+          "11": "송풍건조",
+          "28": "열풍내부살균",
+          "37": "블라우스",
+          "38": "다림질건조",
+          "39": "공간제습",
+          "3a": "살균건조",
+          "3b": "이불/먼지털기",
+          "3c": "피트니스",
+          "3d": "데님"
         }
       },
       "favorite_capacity": {
@@ -647,11 +665,31 @@
         "name": "코스",
         "state": {
           "01": "표준세탁",
+          "02": "초강력세탁",
+          "03": "초절약세탁",
           "04": "쾌속세탁",
-          "06": "XXL 세탁",
+          "05": "울/란제리",
+          "06": "이불",
+          "07": "아웃도어",
           "08": "헹굼+탈수",
+          "09": "무세제통세척",
           "0a": "타월",
+          "0b": "삶음세탁",
+          "0c": "아기옷",
+          "0d": "탈수단독",
+          "0e": "흐린날세탁",
+          "0f": "청정세탁",
+          "10": "건조탈수",
+          "11": "여름이불",
+          "12": "면의류",
+          "13": "검은면의류",
+          "14": "섬세속옷",
+          "15": "피트니스",
+          "16": "블라우스",
           "17": "다운로드 코스",
+          "18": "소프트버블",
+          "19": "AI 맞춤세탁",
+          "1a": "셔츠",
           "1b": "면",
           "1c": "에코 40-60",
           "1d": "쾌속세탁",
@@ -676,6 +714,7 @@
           "32": "셔츠",
           "33": "타월",
           "34": "혼합",
+          "35": "에코 면",
           "36": "세탁+건조",
           "37": "에어워시",
           "38": "면 건조",
@@ -690,16 +729,6 @@
           "60": "통세척+",
           "65": "컬러 의류",
           "66": "데님",
-          "7c": "흰옷",
-          "7d": "이불/방수 의류",
-          "7e": "통세척",
-          "7f": "울/섬세",
-          "86": "찌든 때 세탁",
-          "87": "다운로드",
-          "8f": "강력 냉수 세탁",
-          "96": "미세플라스틱저감",
-          "a0": "15분 쾌속세탁",
-          "b0": "혼합 세탁",
           "69": "AI 맞춤세탁",
           "6a": "울",
           "6b": "데님",
@@ -717,8 +746,17 @@
           "77": "면",
           "78": "헹굼+탈수",
           "79": "탈수만",
+          "7c": "흰옷",
+          "7d": "이불/방수 의류",
+          "7e": "통세척",
+          "7f": "울/섬세",
+          "86": "찌든 때 세탁",
+          "87": "다운로드",
           "88": "펫케어",
-          "35": "에코 면"
+          "8f": "강력 냉수 세탁",
+          "96": "미세플라스틱저감",
+          "a0": "15분 쾌속세탁",
+          "b0": "혼합 세탁"
         }
       },
       "washer_dry_level": {
@@ -1484,11 +1522,12 @@
       },
       "settings": {
         "title": "기기 설정",
-        "description": "일부 기기는 스마트 컨트롤이 꺼져 있다고 보고하는 동안에도 특정 쓰기 요청(예: 세탁기의 기본 세제/섬유유연제 투입량)을 받아들입니다. 기본적으로 LocalThings는 기기가 스마트 컨트롤 꺼짐을 보고하면 기기가 쓰기 요청을 조용히 거부하도록 두지 않고, 명확한 오류와 함께 모든 쓰기를 차단합니다. 스마트 컨트롤이 꺼진 상태에서도 이 기기에 쓰기가 실제로 동작하는 것을 확인한 경우에만 이 옵션을 활성화하세요. 그렇지 않으면 명확한 오류 대신 아무 표시 없이 쓰기에 실패할 수 있습니다.\n\n예상 완료 시각은 기기가 보고하는 남은 시간 추정치를 사용하여 상태를 확인할 때마다 다시 계산합니다. 이 추정치는 업데이트 사이에 1~2분 정도 변하거나 수정될 수 있습니다. 아래의 최소 변경량을 늘리면 추정치가 설정한 시간(분) 이상 변할 때까지 센서가 마지막으로 보고된 값을 유지하므로 기록과 로그북에 불필요한 항목이 쌓이는 것을 줄일 수 있습니다. 계산된 모든 변경 사항을 보고하려면 0으로 설정하세요.\n\n일부 모델은 지원 목록에 없는 모드를 현재 모드로 보고합니다. 예를 들어 Off/Sleep/Speed만 제공하면서 Quiet 모드로 동작 중이라고 보고하는 에어컨이 그렇습니다. LocalThings는 이렇게 발견한 모드를 기억해 두고 계속 제공하므로, 기기가 한 번이라도 그 모드였다면 이후에도 선택할 수 있습니다. 이 옵션을 끄면 기기가 지원한다고 알린 모드만 제공합니다. 이미 기억된 항목을 지우려면 이전 화면의 '기억된 모드 지우기'를 사용하세요.",
+        "description": "일부 기기는 스마트 컨트롤이 꺼져 있다고 보고하는 동안에도 특정 쓰기 요청(예: 세탁기의 기본 세제/섬유유연제 투입량)을 받아들입니다. 기본적으로 LocalThings는 기기가 스마트 컨트롤 꺼짐을 보고하면 기기가 쓰기 요청을 조용히 거부하도록 두지 않고, 명확한 오류와 함께 모든 쓰기를 차단합니다. 스마트 컨트롤이 꺼진 상태에서도 이 기기에 쓰기가 실제로 동작하는 것을 확인한 경우에만 이 옵션을 활성화하세요. 그렇지 않으면 명확한 오류 대신 아무 표시 없이 쓰기에 실패할 수 있습니다.\n\n예상 완료 시각은 기기가 보고하는 남은 시간 추정치를 사용하여 상태를 확인할 때마다 다시 계산합니다. 이 추정치는 업데이트 사이에 1~2분 정도 변하거나 수정될 수 있습니다. 아래의 최소 변경량을 늘리면 추정치가 설정한 시간(분) 이상 변할 때까지 센서가 마지막으로 보고된 값을 유지하므로 기록과 로그북에 불필요한 항목이 쌓이는 것을 줄일 수 있습니다. 계산된 모든 변경 사항을 보고하려면 0으로 설정하세요.\n\n일부 모델은 지원 목록에 없는 모드를 현재 모드로 보고합니다. 예를 들어 Off/Sleep/Speed만 제공하면서 Quiet 모드로 동작 중이라고 보고하는 에어컨이 그렇습니다. LocalThings는 이렇게 발견한 모드를 기억해 두고 계속 제공하므로, 기기가 한 번이라도 그 모드였다면 이후에도 선택할 수 있습니다. 이 옵션을 끄면 기기가 지원한다고 알린 모드만 제공합니다. 이미 기억된 항목을 지우려면 이전 화면의 '기억된 모드 지우기'를 사용하세요. 클라우드에서 다운로드한 코스가 있는 세탁기는 Home Assistant가 아직 제공할 수 없는 코스를 보고하는 즉시 여기에서 알림을 받습니다. 일부 기기는 SmartThings 앱의 \"다운로드 코스\" 화면을 직접 연 적이 없어도 이런 코스를 보고합니다. 이 옵션을 끄면 이 알림이 멈추고 이미 이름을 지정한 다운로드 코스도 코스 목록에서 숨겨집니다. 이미 설정한 내용은 사라지지 않으며, 다시 켜면 즉시 원래대로 돌아옵니다.",
         "data": {
           "bypass_remote_control_lock": "스마트 컨트롤이 꺼진 것으로 보고되어도 쓰기 허용",
           "finish_time_hysteresis_minutes": "예상 완료 시각 - 최소 변경량(분)",
-          "learn_device_modes": "기기가 보고하지만 지원 목록에 없는 모드 기억하기"
+          "learn_device_modes": "기기가 보고하지만 지원 목록에 없는 모드 기억하기",
+          "cloud_courses_enabled": "다운로드 코스 제공"
         }
       },
       "forget_learned_modes": {
@@ -1519,14 +1558,14 @@
       },
       "cloud_manual": {
         "title": "다운로드 코스",
-        "description": "이 기기는 다운로드한 코스를 {total}개 보고하며, 지금까지 {found}개를 확인했습니다.\n\n다운로드한 코스의 설정은 해당 코스가 로드되어 있는 동안에만 확인할 수 있고, 기기는 그 이름을 전달하지 않습니다. 누락된 항목({pending}개)을 추가하려면 기기에서 다운로드 코스를 선택한 다음, 다운로드된 프로그램을 하나씩 차례로 실행하면서 몇 초씩 머무른 뒤 이 화면으로 돌아오세요.\n\n각 코스에 Home Assistant에서 보고 싶은 이름을 입력하세요. 이름을 비워 두면 해당 코스는 코스 목록에서 제외됩니다. 이름은 서로 달라야 합니다.\n\n다운로드 코스는 이 기기에서 다운로드된 프로그램을 실행하는 코스입니다. 자동으로 감지되지만 사용하기 전에 여기서 확인하세요. 다운로드한 코스를 선택하면 이 코스 코드가 기기에 기록됩니다.",
+        "description": "이 기기는 다운로드한 코스를 {total}개 보고하며, 지금까지 {found}개를 확인했습니다.\n\n다운로드한 코스의 설정은 해당 코스가 로드되어 있는 동안에만 확인할 수 있고, 기기는 그 이름을 전달하지 않습니다. 누락된 항목({pending}개)을 추가하려면 기기가 아닌 SmartThings 앱에서 이 기기를 열고 \"다운로드 코스\"를 탭하세요. 이는 화면 아래쪽에 있는 \"코스\"와는 별도의 항목이며, 여기서 중요한 것은 이 항목입니다. 그런 다음 다운로드된 프로그램을 하나씩 차례로 실행하면서 LocalThings가 인식할 수 있도록 몇 초씩 머무른 뒤 이 화면으로 돌아오세요.\n\n각 코스에 Home Assistant에서 보고 싶은 이름을 입력하세요. 이름을 비워 두면 해당 코스는 코스 목록에서 제외됩니다. 이름은 서로 달라야 합니다.\n\n다운로드 코스는 이 기기에서 다운로드된 프로그램을 실행하는 코스입니다. 자동으로 감지되지만 사용하기 전에 여기서 확인하세요. 다운로드한 코스를 선택하면 이 코스 코드가 기기에 기록됩니다.",
         "data": {
           "download_course": "다운로드 코스 코드"
         }
       },
       "cloud_courses": {
         "title": "다운로드 코스",
-        "description": "안내 설정은 기기와 함께 진행됩니다. 기기에서 다운로드한 코스를 선택하고, 코스가 확인될 때마다 하나씩 이름을 지정하세요.\n\n이름 편집은 지금까지 찾은 모든 코스를 한 번에 보여줍니다. 나중에 이름을 바꾸거나 수정할 때 사용하세요.",
+        "description": "안내 설정은 다음과 같이 진행됩니다. 기기가 아닌 SmartThings 앱에서 이 기기를 열고 \"다운로드 코스\"를 탭하세요. 이는 화면 아래쪽에 있는 \"코스\"와는 별도의 항목이며, 여기서 중요한 것은 이 항목입니다. 그곳에서 코스를 선택한 다음 돌아와서, 코스가 확인될 때마다 하나씩 이름을 지정하세요.\n\n이름 편집은 지금까지 찾은 모든 코스를 한 번에 보여줍니다. 나중에 이름을 바꾸거나 수정할 때 사용하세요. 이름 지정은 어느 경우든 가능하지만, 이름을 지정한 코스는 기기 설정에서 \"다운로드 코스 제공\"이 켜져 있을 때만 선택 가능한 코스로 제공됩니다.",
         "menu_options": {
           "cloud_guided": "안내 설정",
           "cloud_manual": "이름 편집"
@@ -1537,7 +1576,7 @@
       },
       "cloud_name": {
         "title": "이 코스 이름 지정",
-        "description": "기기가 다운로드한 코스(슬롯 {slot})로 전환되었으며 {remaining} 남았다고 표시됩니다.\n\nHome Assistant에서 보고 싶은 이름을 입력한 다음, 기기에서 다음 코스를 선택하세요. 비워 두면 이 코스는 목록에서 제외됩니다.\n\n지금까지 이름 지정됨 ({named}/{total}개): {named_list}\n\n이름은 서로 달라야 합니다. 이 창은 언제든지 닫을 수 있습니다. 이름은 진행하는 대로 저장됩니다.",
+        "description": "기기의 \"다운로드 코스\" 슬롯에 이제 새 코스(슬롯 {slot})가 들어 있으며 {remaining} 남았다고 표시됩니다.\n\nHome Assistant에서 보고 싶은 이름을 입력한 다음, SmartThings 앱의 \"다운로드 코스\" 화면에서 아직 \"다운로드됨\"으로 표시되지 않은 다음 코스를 선택하세요. 비워 두면 이 코스는 목록에서 제외됩니다.\n\n지금까지 이름 지정됨 ({named}/{total}개): {named_list}\n\n이름은 서로 달라야 합니다. 이 창은 언제든지 닫을 수 있습니다. 이름은 진행하는 대로 저장됩니다.",
         "data": {
           "name": "이름",
           "download_course": "다운로드 코스 코드"
@@ -1545,7 +1584,7 @@
       },
       "cloud_timeout": {
         "title": "선택된 코스 없음",
-        "description": "기기에서 아무것도 선택되지 않았습니다. 다운로드 코스로 설정되어 있는지 확인한 다음, 다운로드된 프로그램을 하나씩 실행해 보세요.\n\n지금까지 이름 지정됨 ({named}/{total}개): {named_list}\n\n지금까지 이름을 지정한 항목은 이미 저장되었습니다.",
+        "description": "기기에서 변경된 내용이 없습니다. SmartThings 앱에서 \"다운로드 코스\"(화면 아래쪽에 있는 \"코스\"와는 별도의 항목)를 탭하고, 아직 \"다운로드됨\"으로 표시되지 않은 코스를 선택한 다음 완료를 탭했는지 확인하세요.\n\n지금까지 이름 지정됨 ({named}/{total}개): {named_list}\n\n지금까지 이름을 지정한 항목은 이미 저장되었습니다.",
         "menu_options": {
           "cloud_guided": "다시 대기",
           "cloud_finish": "완료"
@@ -1562,7 +1601,7 @@
       "not_loaded": "이 기기는 아직 연결되지 않았습니다. 기기를 불러온 후 다시 시도하세요."
     },
     "progress": {
-      "cloud_wait": "지금 기기에서 다운로드한 코스를 선택하세요.\n\n지금까지 이름 지정됨 ({named}/{total}개): {named_list}\n\n이 창은 언제든지 닫을 수 있습니다. 이름은 진행하는 대로 저장됩니다."
+      "cloud_wait": "기기가 아닌 SmartThings 앱에서 이 기기를 열고 \"다운로드 코스\"를 탭하세요. 이는 화면 아래쪽에 있는 \"코스\"와는 별도의 항목이며, 이 방식으로 인식할 수 있는 코스만 나열됩니다. 아직 \"다운로드됨\"으로 표시되지 않은 코스를 선택한 다음 완료를 탭하세요.\n\n기기가 근처에 있거나 코스를 실행 중일 필요는 없습니다. 전원이 켜져 있고 연결되어 있기만 하면 됩니다.\n\n지금까지 이름 지정됨 ({named}/{total}개): {named_list}\n\n이 창은 언제든지 닫을 수 있습니다. 이름은 진행하는 대로 저장됩니다."
     }
   },
   "issues": {
@@ -1572,7 +1611,7 @@
     },
     "cloud_courses_undiscovered": {
       "title": "{device_name}의 다운로드 코스가 설정되지 않음",
-      "description": "{device_name}에는 Home Assistant가 아직 제공할 수 없는 다운로드한 코스가 {total}개 중 {pending}개 있습니다. 다운로드한 코스는 기기에서 해당 코스가 로드된 상태로 확인되고 이름을 지정한 후에만 사용할 수 있습니다.\n\n설정하려면 설정 > 기기 및 서비스 > LocalThings > {device_name} > 구성 > 다운로드 코스로 이동하여 안내를 따르세요."
+      "description": "{device_name}에는 Home Assistant가 아직 제공할 수 없는 다운로드한 코스가 {total}개 중 {pending}개 있습니다. 다운로드한 코스는 SmartThings 앱의 \"다운로드 코스\" 화면(\"코스\" 화면이 아님)에서 기기가 해당 코스로 로드된 상태로 확인되고 이름을 지정한 후에만 사용할 수 있습니다.\n\n설정하려면 설정 > 기기 및 서비스 > LocalThings > {device_name} > 구성 > 다운로드 코스로 이동하여 안내를 따르세요.\n\n다운로드 코스를 사용하지 않나요? 대신 구성 > 기기 설정으로 이동하여 \"다운로드 코스 제공\"을 꺼서 이 알림을 완전히 중지하세요."
     }
   },
   "exceptions": {

custom_components/localthings/translations/nl.json

@@ -376,7 +376,25 @@
           "53": "AI drogen+",
           "4e": "Zelf drogen",
           "26": "Luchtverfrissing",
-          "2a": "Hygiënische verzorging+"
+          "2a": "Hygiënische verzorging+",
+          "02": "AI drogen",
+          "03": "Super Speed",
+          "05": "Beddengoed",
+          "07": "Fijne was",
+          "09": "Overhemden",
+          "0b": "Paddingverzorging",
+          "0c": "Waterafstotende outdoorverzorging",
+          "0e": "Handdoeken",
+          "0f": "Wol",
+          "11": "Koude lucht",
+          "28": "Interne desinfectie met hete lucht",
+          "37": "Blouses",
+          "38": "Strijkdroog",
+          "39": "Ruimte ontvochtigen",
+          "3a": "Hygiënisch drogen",
+          "3b": "Beddengoed/Stof verwijderen",
+          "3c": "Sportkleding",
+          "3d": "Spijkergoed"
         }
       },
       "favorite_capacity": {
@@ -647,11 +665,31 @@
         "name": "Programma",
         "state": {
           "01": "Normaal",
+          "02": "Extra intensief",
+          "03": "Super Eco",
           "04": "Snelle was",
-          "06": "XXL was",
+          "05": "Wol/Lingerie",
+          "06": "Beddengoed",
+          "07": "Outdoor",
           "08": "Spoelen+centrifugeren",
+          "09": "Trommel reinigen",
           "0a": "Handdoeken",
+          "0b": "Kookwas",
+          "0c": "Babyverzorging",
+          "0d": "Alleen centrifugeren",
+          "0e": "Bewolkte dag",
+          "0f": "Zuivere was",
+          "10": "Droogcentrifugeren",
+          "11": "Zomer beddengoed",
+          "12": "Katoen",
+          "13": "Zwart katoen",
+          "14": "Fijn ondergoed",
+          "15": "Sportkleding",
+          "16": "Blouses",
           "17": "Gedownload",
+          "18": "Soft Bubble",
+          "19": "AI Wash",
+          "1a": "Overhemden",
           "1b": "Katoen",
           "1c": "Eco 40-60",
           "1d": "Super Speed",
@@ -676,6 +714,7 @@
           "32": "Overhemden",
           "33": "Handdoeken",
           "34": "Gemengd",
+          "35": "Eco katoen",
           "36": "Wassen+drogen",
           "37": "Air Wash",
           "38": "Katoen drogen",
@@ -717,8 +756,7 @@
           "8f": "Intensief koud",
           "96": "Minder microvezels",
           "a0": "15' Snelle was",
-          "b0": "Gemengde was",
-          "35": "Eco katoen"
+          "b0": "Gemengde was"
         }
       },
       "washer_dry_level": {
@@ -1484,11 +1522,12 @@
       },
       "settings": {
         "title": "Apparaatinstellingen",
-        "description": "Sommige apparaten accepteren bepaalde schrijfbewerkingen (bijvoorbeeld de standaarddosering van wasmiddel of wasverzachter op een wasmachine), ook als ze melden dat de afstandsbediening is uitgeschakeld. LocalThings blokkeert standaard elke schrijfbewerking met een duidelijke foutmelding wanneer een apparaat meldt dat de afstandsbediening is uitgeschakeld, in plaats van het apparaat de opdracht stilzwijgend te laten weigeren. Schakel deze optie alleen in als je hebt bevestigd dat schrijfbewerkingen op dit apparaat echt werken wanneer de afstandsbediening is uitgeschakeld. Anders verruil je de duidelijke foutmelding voor een stille mislukking.\n\nDe geschatte eindtijd wordt bij elke poll opnieuw berekend op basis van de resterende tijd die het apparaat opgeeft, wat kan afwijken of met een minuut of wat worden bijgesteld tussen updates. Verhoog de minimale wijziging hieronder om de sensor op zijn laatst gerapporteerde waarde te houden totdat de schatting met minstens dat aantal minuten verandert, wat de ruis in geschiedenis/logboek vermindert. Zet op 0 om elke berekende wijziging te rapporteren.\n\nSommige modellen melden een modus die ze nooit als ondersteund opgeven: bijvoorbeeld een airco die in Quiet staat maar alleen Off/Sleep/Speed aanbiedt. LocalThings onthoudt elke zo waargenomen modus en blijft die aanbieden, zodat hij selecteerbaar blijft zodra het apparaat er minstens één keer in heeft gestaan. Schakel dit uit om alleen aan te bieden wat het apparaat opgeeft; gebruik \"Onthouden modi vergeten\" in het vorige scherm om te wissen wat al is onthouden.",
+        "description": "Sommige apparaten accepteren bepaalde schrijfbewerkingen (bijvoorbeeld de standaarddosering van wasmiddel of wasverzachter op een wasmachine), ook als ze melden dat de afstandsbediening is uitgeschakeld. LocalThings blokkeert standaard elke schrijfbewerking met een duidelijke foutmelding wanneer een apparaat meldt dat de afstandsbediening is uitgeschakeld, in plaats van het apparaat de opdracht stilzwijgend te laten weigeren. Schakel deze optie alleen in als je hebt bevestigd dat schrijfbewerkingen op dit apparaat echt werken wanneer de afstandsbediening is uitgeschakeld. Anders verruil je de duidelijke foutmelding voor een stille mislukking.\n\nDe geschatte eindtijd wordt bij elke poll opnieuw berekend op basis van de resterende tijd die het apparaat opgeeft, wat kan afwijken of met een minuut of wat worden bijgesteld tussen updates. Verhoog de minimale wijziging hieronder om de sensor op zijn laatst gerapporteerde waarde te houden totdat de schatting met minstens dat aantal minuten verandert, wat de ruis in geschiedenis/logboek vermindert. Zet op 0 om elke berekende wijziging te rapporteren.\n\nSommige modellen melden een modus die ze nooit als ondersteund opgeven: bijvoorbeeld een airco die in Quiet staat maar alleen Off/Sleep/Speed aanbiedt. LocalThings onthoudt elke zo waargenomen modus en blijft die aanbieden, zodat hij selecteerbaar blijft zodra het apparaat er minstens één keer in heeft gestaan. Schakel dit uit om alleen aan te bieden wat het apparaat opgeeft; gebruik \"Onthouden modi vergeten\" in het vorige scherm om te wissen wat al is onthouden. Een wasapparaat met uit de cloud gedownloade programma's krijgt hier een herinnering zodra het er een meldt die Home Assistant nog niet kan aanbieden -- sommige apparaten melden er een, ook als je het scherm \"Gedownloade programma's\" in de SmartThings-app zelf nooit hebt geopend. Zet dit uit om die herinnering te stoppen en al benoemde gedownloade programma's uit de programmalijst te verbergen; niets van wat al is ingesteld gaat verloren, en bij opnieuw inschakelen verschijnt het meteen weer.",
         "data": {
           "bypass_remote_control_lock": "Schrijfbewerkingen toestaan wanneer afstandsbediening als uitgeschakeld wordt gemeld",
           "finish_time_hysteresis_minutes": "Geschatte eindtijd -- minimale wijziging (minuten)",
-          "learn_device_modes": "Modi onthouden die het apparaat meldt maar niet als ondersteund opgeeft"
+          "learn_device_modes": "Modi onthouden die het apparaat meldt maar niet als ondersteund opgeeft",
+          "cloud_courses_enabled": "Gedownloade programma's aanbieden"
         }
       },
       "forget_learned_modes": {
@@ -1519,14 +1558,14 @@
       },
       "cloud_manual": {
         "title": "Gedownloade programma's",
-        "description": "Dit apparaat meldt {total} gedownloade programma's; {found} daarvan zijn tot nu toe gezien.\n\nDe instellingen van een gedownload programma zijn alleen zichtbaar zolang dat programma geladen is, en het apparaat meldt nooit de naam ervan. Om de ontbrekende ({pending}) toe te voegen: selecteer op het apparaat het programma \"Gedownload\", doorloop dan elk gedownload programma na elkaar, pauzeer bij elk een paar seconden, en kom hierna terug.\n\nGeef elk programma de naam die je in Home Assistant wilt zien. Laat een naam leeg om dat programma buiten de programmalijst te houden. Namen moeten uniek zijn.\n\nHet programma \"Gedownload\" is het programma op dit apparaat dat een gedownload programma uitvoert. Het wordt automatisch gedetecteerd, maar bevestig dit hier voor gebruik: als je een gedownload programma selecteert, wordt deze programmacode naar het apparaat geschreven.",
+        "description": "Dit apparaat meldt {total} gedownloade programma's; {found} daarvan zijn tot nu toe gezien.\n\nDe instellingen van een gedownload programma zijn alleen zichtbaar zolang dat programma geladen is, en het apparaat meldt nooit de naam ervan. Om de ontbrekende ({pending}) toe te voegen: open in de SmartThings-app (niet op het apparaat zelf) dit apparaat en tik op \"Gedownloade programma's\" -- een aparte regel, los van \"Programma\", verderop op het scherm, en degene die hier telt. Doorloop dan elk gedownload programma na elkaar, pauzeer bij elk een paar seconden zodat LocalThings het kan zien, en kom hierna terug.\n\nGeef elk programma de naam die je in Home Assistant wilt zien. Laat een naam leeg om dat programma buiten de programmalijst te houden. Namen moeten uniek zijn.\n\nHet programma \"Gedownload\" is het programma op dit apparaat dat een gedownload programma uitvoert. Het wordt automatisch gedetecteerd, maar bevestig dit hier voor gebruik: als je een gedownload programma selecteert, wordt deze programmacode naar het apparaat geschreven.",
         "data": {
           "download_course": "Programmacode van \"Gedownload\""
         }
       },
       "cloud_courses": {
         "title": "Gedownloade programma's",
-        "description": "Begeleide installatie loodst je stap voor stap langs het apparaat: selecteer op het apparaat een gedownload programma en geef het een naam zodra het gevonden is, één voor één.\n\nNamen bewerken toont in één keer alles wat tot nu toe is gevonden — gebruik dit later om iets te hernoemen of te corrigeren.",
+        "description": "Begeleide installatie loodst je stap voor stap: open in de SmartThings-app (niet op het apparaat zelf) dit apparaat en tik op \"Gedownloade programma's\" -- een aparte regel, los van \"Programma\", verderop op het scherm, en degene die hier telt. Kies daar een programma, kom terug en geef het een naam zodra het gevonden is, één voor één.\n\nNamen bewerken toont in één keer alles wat tot nu toe is gevonden — gebruik dit later om iets te hernoemen of te corrigeren. Namen geven werkt sowieso, maar een benoemd programma wordt alleen als selecteerbaar programma aangeboden zolang \"Gedownloade programma's aanbieden\" aan staat in de apparaatinstellingen.",
         "menu_options": {
           "cloud_guided": "Begeleide installatie",
           "cloud_manual": "Namen bewerken"
@@ -1537,7 +1576,7 @@
       },
       "cloud_name": {
         "title": "Geef dit programma een naam",
-        "description": "Het apparaat is overgeschakeld naar een gedownload programma (slot {slot}) en meldt nog {remaining} resterend.\n\nGeef het de naam die je in Home Assistant wilt zien en selecteer daarna het volgende op het apparaat. Laat het veld leeg om dit programma buiten de lijst te houden.\n\nTot nu toe benoemd ({named} van {total}): {named_list}\n\nNamen moeten uniek zijn. Je kunt dit venster op elk moment sluiten — namen worden onderweg opgeslagen.",
+        "description": "Het vak \"Gedownloade programma's\" van het apparaat bevat nu een nieuw programma (slot {slot}) en meldt nog {remaining} resterend.\n\nGeef het de naam die je in Home Assistant wilt zien en kies daarna in het scherm \"Gedownloade programma's\" van de SmartThings-app het volgende programma dat nog niet als \"Gedownload\" is gemarkeerd. Laat het veld leeg om dit programma buiten de lijst te houden.\n\nTot nu toe benoemd ({named} van {total}): {named_list}\n\nNamen moeten uniek zijn. Je kunt dit venster op elk moment sluiten — namen worden onderweg opgeslagen.",
         "data": {
           "name": "Naam",
           "download_course": "Programmacode van \"Gedownload\""
@@ -1545,7 +1584,7 @@
       },
       "cloud_timeout": {
         "title": "Geen programma geselecteerd",
-        "description": "Er is niets geselecteerd op het apparaat. Zorg dat het is ingesteld op het programma \"Gedownload\" en doorloop dan de gedownloade programma's.\n\nTot nu toe benoemd ({named} van {total}): {named_list}\n\nAlles wat tot nu toe benoemd is, is al opgeslagen.",
+        "description": "Er is niets veranderd op het apparaat. Zorg dat je in de SmartThings-app op \"Gedownloade programma's\" hebt getikt -- een aparte regel, los van \"Programma\", verderop op het scherm -- en een programma hebt gekozen dat nog niet als \"Gedownload\" was gemarkeerd, en daarna op Klaar hebt getikt.\n\nTot nu toe benoemd ({named} van {total}): {named_list}\n\nAlles wat tot nu toe benoemd is, is al opgeslagen.",
         "menu_options": {
           "cloud_guided": "Opnieuw wachten",
           "cloud_finish": "Voltooien"
@@ -1562,7 +1601,7 @@
       "not_loaded": "Dit apparaat is nog niet verbonden. Probeer het opnieuw zodra het is geladen."
     },
     "progress": {
-      "cloud_wait": "Selecteer nu een gedownload programma op het apparaat.\n\nTot nu toe benoemd ({named} van {total}): {named_list}\n\nJe kunt dit venster op elk moment sluiten — namen worden onderweg opgeslagen."
+      "cloud_wait": "Open in de SmartThings-app (niet op het apparaat zelf) dit apparaat en tik op \"Gedownloade programma's\" -- een aparte regel, los van \"Programma\", verderop op het scherm, die alleen de programma's toont die op deze manier te herkennen zijn. Kies er een die nog niet als \"Gedownload\" is gemarkeerd en tik op Klaar.\n\nHet apparaat hoeft niet in de buurt te zijn of het programma uit te voeren -- het moet alleen aan staan en verbonden zijn.\n\nTot nu toe benoemd ({named} van {total}): {named_list}\n\nJe kunt dit venster op elk moment sluiten — namen worden onderweg opgeslagen."
     }
   },
   "issues": {
@@ -1572,7 +1611,7 @@
     },
     "cloud_courses_undiscovered": {
       "title": "Gedownloade programma's niet ingesteld voor {device_name}",
-      "description": "{device_name} heeft {pending} van de {total} gedownloade programma's die Home Assistant nog niet kan aanbieden. Een gedownload programma kan pas worden gebruikt zodra het apparaat ermee geladen is gezien en je het een naam hebt gegeven.\n\nGa om ze in te stellen naar Instellingen > Apparaten & diensten > LocalThings > {device_name} > Configureren > Gedownloade programma's en volg de instructies daar."
+      "description": "{device_name} heeft {pending} van de {total} gedownloade programma's die Home Assistant nog niet kan aanbieden. Een gedownload programma kan pas worden gebruikt zodra het apparaat ermee geladen is gezien -- in het scherm \"Gedownloade programma's\" van de SmartThings-app, niet in \"Programma\" -- en je het een naam hebt gegeven.\n\nGa om ze in te stellen naar Instellingen > Apparaten & diensten > LocalThings > {device_name} > Configureren > Gedownloade programma's en volg de instructies daar.\n\nGebruik je geen gedownloade programma's? Ga dan naar Configureren > Apparaatinstellingen en zet \"Gedownloade programma's aanbieden\" uit om deze herinnering voorgoed te stoppen."
     }
   },
   "exceptions": {

tests/localthings/test_config_flow.py

@@ -15,6 +15,7 @@ from custom_components.localthings.const import (
     CONF_BYPASS_REMOTE_CONTROL,
     CONF_CA_CERT_PEM,
     CONF_CA_KEY_PEM,
+    CONF_CLOUD_COURSES_ENABLED,
     CONF_HOST,
     CONF_LEAF_CERT_PEM,
     CONF_LEARN_MODES,
@@ -1180,6 +1181,43 @@ async def test_learned_modes_option_can_be_turned_off(hass: HomeAssistant) -> No
     assert entry.options[CONF_LEARN_MODES] is False
 
 
+async def test_cloud_courses_enabled_option_defaults_to_on(hass: HomeAssistant) -> None:
+    """Issue #364's toggle starts on -- devices that already have a working
+    downloaded-cycle setup keep it without having to find the option first."""
+    entry = MockConfigEntry(domain=DOMAIN, data=ENTRY_DATA, unique_id=f"localthings_{MOCK_SERIAL}")
+    entry.add_to_hass(hass)
+
+    result = await hass.config_entries.options.async_init(entry.entry_id)
+    result = await hass.config_entries.options.async_configure(
+        result["flow_id"], user_input={"next_step_id": "settings"}
+    )
+
+    data_schema = result["data_schema"]
+    assert data_schema is not None
+    assert data_schema({})[CONF_CLOUD_COURSES_ENABLED] is True
+
+
+async def test_cloud_courses_enabled_option_can_be_turned_off(hass: HomeAssistant) -> None:
+    entry = MockConfigEntry(domain=DOMAIN, data=ENTRY_DATA, unique_id=f"localthings_{MOCK_SERIAL}")
+    entry.add_to_hass(hass)
+
+    result = await hass.config_entries.options.async_init(entry.entry_id)
+    result = await hass.config_entries.options.async_configure(
+        result["flow_id"], user_input={"next_step_id": "settings"}
+    )
+    result = await hass.config_entries.options.async_configure(
+        result["flow_id"],
+        user_input={
+            CONF_BYPASS_REMOTE_CONTROL: False,
+            CONF_LEARN_MODES: True,
+            CONF_CLOUD_COURSES_ENABLED: False,
+        },
+    )
+
+    assert result["type"] == FlowResultType.CREATE_ENTRY
+    assert entry.options[CONF_CLOUD_COURSES_ENABLED] is False
+
+
 @pytest.mark.parametrize(
     ("stored", "listed"),
     [

tests/test_cloud_courses_flow.py

@@ -22,7 +22,11 @@ from homeassistant.helpers import issue_registry as ir
 from pytest_homeassistant_custom_component.common import MockConfigEntry
 
 from custom_components.localthings import cloudcourse
-from custom_components.localthings.const import CONF_CLOUD_COURSES, DOMAIN
+from custom_components.localthings.const import (
+    CONF_CLOUD_COURSES,
+    CONF_CLOUD_COURSES_ENABLED,
+    DOMAIN,
+)
 from custom_components.localthings.coordinator import LocalThingsCoordinator
 from custom_components.localthings.registry.entities import SelectDesc
 from custom_components.localthings.registry.subdevices import MAIN
@@ -55,10 +59,11 @@ async def _flush(hass: HomeAssistant) -> None:
     await hass.async_block_till_done()
 
 
-def _entry(hass: HomeAssistant, data=None) -> MockConfigEntry:
+def _entry(hass: HomeAssistant, data=None, options=None) -> MockConfigEntry:
     entry = MockConfigEntry(
         domain=DOMAIN,
         data={**ENTRY_DATA, **(data or {})},
+        options=options or {},
         unique_id="localthings_CLOUD-COURSE-TEST",
     )
     entry.add_to_hass(hass)
@@ -240,6 +245,138 @@ async def test_a_malformed_entry_record_does_not_block_setup(hass: HomeAssistant
     assert coordinator.cloud_courses.snapshot()["slots"]["55"]["blob"] == SPORTS
 
 
+# ---------------------------------------------------------------------------
+# cloud_courses_enabled toggle (issue #364) -- some devices report a
+# downloaded program's payload before the owner has ever meant to use the
+# feature, so the Repair and the entity offering need a way to be turned
+# off entirely without discarding what was already learned.
+# ---------------------------------------------------------------------------
+
+
+def test_cloud_courses_enabled_defaults_to_true(hass: HomeAssistant):
+    coordinator = LocalThingsCoordinator(hass, _entry(hass))
+    assert coordinator.cloud_courses_enabled is True
+
+
+async def test_disabling_suppresses_the_repair(hass: HomeAssistant):
+    entry = _entry(hass, options={CONF_CLOUD_COURSES_ENABLED: False})
+    coordinator = await _coordinator(hass, entry)
+    coordinator._refresh_cloud_course_issue()
+    await _flush(hass)
+
+    registry = ir.async_get(hass)
+    assert registry.async_get_issue(DOMAIN, f"cloud_courses_{entry.entry_id}") is None
+
+
+async def test_disabling_clears_an_already_open_repair(hass: HomeAssistant):
+    """Turning the option off has to reach a Repair that's already showing,
+    not just prevent a future one -- otherwise the toggle looks broken to
+    anyone who flips it after already seeing the nudge."""
+    entry = _entry(hass)
+    coordinator = await _coordinator(hass, entry)
+    coordinator._refresh_cloud_course_issue()
+    await _flush(hass)
+    registry = ir.async_get(hass)
+    issue_id = f"cloud_courses_{entry.entry_id}"
+    assert registry.async_get_issue(DOMAIN, issue_id) is not None
+
+    hass.config_entries.async_update_entry(entry, options={CONF_CLOUD_COURSES_ENABLED: False})
+    coordinator._refresh_cloud_course_issue()
+    await _flush(hass)
+
+    assert registry.async_get_issue(DOMAIN, issue_id) is None
+
+
+async def test_disabling_hides_an_already_named_program_from_the_cycle_select(
+    hass: HomeAssistant,
+):
+    """`coordinator._on_cloud_courses_changed()` after the option write
+    stands in for __init__.py's options-update listener, which this
+    lightweight coordinator (no async_setup_entry) never registers --
+    see test_disabling_clears_an_already_open_repair for the same shape."""
+    entry = _entry(hass)
+    coordinator = await _coordinator(hass, entry)
+    coordinator.apply_cloud_courses({"55": "Sports"}, "87")
+    await _flush(hass)
+    assert "cloud:55" in _cycle_options(coordinator)
+
+    hass.config_entries.async_update_entry(entry, options={CONF_CLOUD_COURSES_ENABLED: False})
+    coordinator._on_cloud_courses_changed()
+    assert "cloud:55" not in _cycle_options(coordinator)
+    # Not discarded -- the store itself is untouched, only what
+    # entity_resources() hands the registry changes.
+    assert coordinator.cloud_courses.named() == {"55": "Sports"}
+    assert entry.data[CONF_CLOUD_COURSES]["slots"]["55"]["name"] == "Sports"
+
+
+async def test_re_enabling_immediately_restores_the_offering(hass: HomeAssistant):
+    entry = _entry(hass, options={CONF_CLOUD_COURSES_ENABLED: False})
+    coordinator = await _coordinator(hass, entry)
+    coordinator.apply_cloud_courses({"55": "Sports"}, "87")
+    await _flush(hass)
+    assert "cloud:55" not in _cycle_options(coordinator)
+
+    hass.config_entries.async_update_entry(entry, options={CONF_CLOUD_COURSES_ENABLED: True})
+    coordinator._on_cloud_courses_changed()
+    assert "cloud:55" in _cycle_options(coordinator)
+
+
+async def test_disabling_does_not_stop_passive_observation(hass: HomeAssistant):
+    """Guided/manual setup depend on live observation to detect a newly
+    selected program at all -- see CONF_CLOUD_COURSES_ENABLED's own comment
+    for why the option leaves this running rather than gating it too."""
+    entry = _entry(hass, options={CONF_CLOUD_COURSES_ENABLED: False})
+    coordinator = await _coordinator(hass, entry)
+
+    assert coordinator.cloud_courses.snapshot()["slots"]["55"]["blob"] == SPORTS
+    assert entry.data[CONF_CLOUD_COURSES]["slots"]["55"]["blob"] == SPORTS
+
+
+async def test_disabling_pushes_the_new_current_option_immediately(hass: HomeAssistant):
+    """select.py's current_option reads coordinator.data, not
+    canonical_resources() -- clearing only the canonical-view cache left
+    it stale until whatever poll happened to run next. The fixture is
+    sitting on a one-time Jeans ('6B') override, so naming it is what
+    makes the live selection actually depend on the cloud store rather
+    than falling back to the raw course code."""
+    entry = _entry(hass)
+    coordinator = await _coordinator(hass, entry)
+    coordinator.apply_cloud_courses({"55": "Sports", "6B": "Jeans"}, "87")
+    await _flush(hass)
+    assert coordinator.data["cycle"] == "cloud:6B"
+
+    hass.config_entries.async_update_entry(entry, options={CONF_CLOUD_COURSES_ENABLED: False})
+    coordinator._on_cloud_courses_changed()
+
+    assert coordinator.data["cycle"] == "87"
+
+
+async def test_an_unrelated_option_save_before_first_poll_does_not_clear_a_real_repair(
+    hass: HomeAssistant,
+):
+    """_on_cloud_courses_changed now runs from __init__.py's options-update
+    listener on *every* entry save, not just a cloud-course-specific one --
+    including one made before this device's first poll (a fresh restart,
+    still rehydrating). /course/vs/0 unpolled reads as an empty rep, which
+    must not be treated as evidence that nothing is pending: that would
+    delete a Repair a real poll had every reason to raise."""
+    entry = _entry(hass)
+    coordinator = await _coordinator(hass, entry)
+    coordinator._refresh_cloud_course_issue()
+    await _flush(hass)
+    registry = ir.async_get(hass)
+    issue_id = f"cloud_courses_{entry.entry_id}"
+    assert registry.async_get_issue(DOMAIN, issue_id) is not None
+
+    # A second coordinator against the same entry, standing in for a
+    # restart that hasn't polled yet -- its own resource cache is empty.
+    fresh = LocalThingsCoordinator(hass, entry)
+    fresh._on_cloud_courses_changed()
+    await _flush(hass)
+
+    assert registry.async_get_issue(DOMAIN, issue_id) is not None
+
+
 # ---------------------------------------------------------------------------
 # Options flow
 # ---------------------------------------------------------------------------

tests/test_translations.py

@@ -180,10 +180,14 @@ def test_confirmed_washer_table_02_towels_bedding_are_not_swapped():
 def test_confirmed_washer_table_02_missing_course_names():
     """Issue #342: 06/08/a0 had no translation and fell back to the raw
     device code in the UI; 74 was already translated by the time this
-    landed and is pinned here only as a "didn't regress" anchor."""
+    landed and is pinned here only as a "didn't regress" anchor.
+
+    06's wording was corrected by issue #376 (originally 'XXL Laundry';
+    that device's own '이불' report -- the same text as the confirmed
+    Bedding codes 24/6f -- turned out to be the right one)."""
     states = _load("en")["entity"]["select"]["washer_cycle_table_02"]["state"]
     assert {code: states[code] for code in ("06", "08", "74", "a0")} == {
-        "06": "XXL Laundry",
+        "06": "Bedding",
         "08": "Rinse+Spin",
         "74": "Drum Clean",
         "a0": "15' Quick Wash",
@@ -211,6 +215,167 @@ def test_confirmed_washer_table_02_ww90dg5g34able_course_names():
     }
 
 
+def test_confirmed_washer_table_02_wf21t6500kv_course_names():
+    """Issue #376: WF21T6500KV (DA_WM_A51_20_COMMON) reported Korean labels
+    for 21 previously-untranslated Table_02 codes.
+
+    Several share their Korean text with an already-confirmed code
+    (cross-checked against translations/ko.json, not guessed), so those
+    reuse the established label rather than a fresh translation -- checked
+    in every locale per issue #363's precedent, since a locale that
+    translated the shared text differently would still pass the
+    key-topology test alone. That includes '06': its Korean text ('이불')
+    matches the confirmed Bedding codes 24/6f exactly, which superseded
+    the wrong 'XXL Laundry' wording #342 had originally given it (see
+    test_confirmed_washer_table_02_missing_course_names).
+    """
+    english = _load("en")["entity"]["select"]["washer_cycle_table_02"]["state"]
+    assert {
+        code: english[code]
+        for code in (
+            "02",
+            "03",
+            "05",
+            "06",
+            "07",
+            "09",
+            "0b",
+            "0c",
+            "0d",
+            "0e",
+            "0f",
+            "10",
+            "11",
+            "12",
+            "13",
+            "14",
+            "15",
+            "16",
+            "18",
+            "19",
+            "1a",
+        )
+    } == {
+        "02": "Extra Heavy Duty",
+        "03": "Super Eco Wash",
+        "05": "Wool/Lingerie",
+        "06": "Bedding",
+        "07": "Outdoor",
+        "09": "Drum Clean",
+        "0b": "Boil Wash",
+        "0c": "Baby Care",
+        "0d": "Spin Only",
+        "0e": "Cloudy Day",
+        "0f": "Pure Wash",
+        "10": "Spin Dry",
+        "11": "Summer Bedding",
+        "12": "Cottons",
+        "13": "Black Cottons",
+        "14": "Delicate Underwear",
+        "15": "Activewear",
+        "16": "Blouses",
+        "18": "Soft Bubble",
+        "19": "AI Wash",
+        "1a": "Shirts",
+    }
+
+    # Anchors picked among the code's own duplicate-label siblings by
+    # whichever this catalog already has translated consistently -- '2b'
+    # over its "AI 맞춤세탁" twin '69', which nl.json alone translates
+    # differently ("AI wassen" vs "AI Wash"), an existing inconsistency
+    # unrelated to this issue and not one this PR resolves.
+    reused_pairs = (
+        ("06", "24"),
+        ("07", "75"),
+        ("09", "3a"),
+        ("0c", "2e"),
+        ("15", "2f"),
+        ("16", "6c"),
+        ("19", "2b"),
+        ("1a", "32"),
+    )
+    for language in _languages():
+        states = _load(language)["entity"]["select"]["washer_cycle_table_02"]["state"]
+        for new_code, anchor_code in reused_pairs:
+            assert states[new_code] == states[anchor_code], (language, new_code, anchor_code)
+
+
+def test_confirmed_dryer_table_03_dv19t8745bv_course_names():
+    """Issue #376: DV19T8745BV (DA_WM_TP1_21_COMMON) reported Korean labels
+    for 18 previously-untranslated Table_03 codes -- none conflict with an
+    existing entry. As with the washer table above, codes sharing Korean
+    text with an already-confirmed code (including two, '3c'/'3d', whose
+    text matches a washer_cycle_table_02 entry rather than one on this
+    table) reuse that label instead of a fresh translation, checked in
+    every locale.
+    """
+    english = _load("en")["entity"]["select"]["dryer_cycle_table_03"]["state"]
+    assert {
+        code: english[code]
+        for code in (
+            "02",
+            "03",
+            "05",
+            "07",
+            "09",
+            "0b",
+            "0c",
+            "0e",
+            "0f",
+            "11",
+            "28",
+            "37",
+            "38",
+            "39",
+            "3a",
+            "3b",
+            "3c",
+            "3d",
+        )
+    } == {
+        "02": "AI Dry",
+        "03": "Super Speed",
+        "05": "Bedding",
+        "07": "Delicates",
+        "09": "Shirts",
+        "0b": "Padding Care",
+        "0c": "Outdoor Water-Repellent Care",
+        "0e": "Towels",
+        "0f": "Wool",
+        "11": "Cool air",
+        "28": "Interior Hot Air Sanitize",
+        "37": "Blouses",
+        "38": "Iron dry",
+        "39": "Room Dehumidify",
+        "3a": "Hygiene Care",
+        "3b": "Bedding/Dust Off",
+        "3c": "Activewear",
+        "3d": "Denim",
+    }
+
+    same_table_pairs = (
+        ("02", "29"),
+        ("03", "17"),
+        ("05", "1b"),
+        ("07", "19"),
+        ("09", "1c"),
+        ("0e", "1d"),
+        ("0f", "1a"),
+        ("11", "24"),
+        ("38", "20"),
+        ("3a", "21"),
+    )
+    for language in _languages():
+        d_states = _load(language)["entity"]["select"]["dryer_cycle_table_03"]["state"]
+        w_states = _load(language)["entity"]["select"]["washer_cycle_table_02"]["state"]
+        for new_code, anchor_code in same_table_pairs:
+            assert d_states[new_code] == d_states[anchor_code], (language, new_code, anchor_code)
+        # Cross-table reuse: same Korean text as a washer_cycle_table_02 code.
+        assert d_states["37"] == w_states["6c"], language  # Blouses
+        assert d_states["3c"] == w_states["2f"], language  # Activewear
+        assert d_states["3d"] == w_states["66"], language  # Denim
+
+
 def test_reported_washer_standard_courses_all_have_table_02_labels():
     """Every non-personal code in the reported washer's live course list
     must resolve through the Table_02 catalog instead of appearing as raw