bhetherman/localthings
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
6c980f927be245892a84ff0059efc1c8fd112102
localthings/tests
T
History
Marek Tyburec 6c980f927b Address review: make the AddWash master switch's On idempotent 
Home Assistant calls turn_on regardless of current state, and applying a
scene re-asserts every captured state, so asserting the alarm on over a
rinse-only AddWashSet_1 rewrote it to _7 -- silently widening the moments
the user picked, with no state change on this switch to point at it. The
write is now refused when the mask is already non-zero.

Distinct from the off-then-on path documented in _add_wash_bit_switch,
where the appliance has no subset left to keep.

Also satisfies the ty check on the new tests: resolve(),
for_device_by_model() and exists_fn are all optional, asserted the way
the other capability tests do.
2026-08-20 06:56:47 +02:00
..
fixtures
Add AddWash controls and sensors for washers
2026-08-19 10:02:07 +02:00
localthings
Trim the identity work's comments to the contributing guidelines
2026-08-17 05:33:49 +00:00
__init__.py
test: add pytest infra and device-dump fixtures
2026-06-30 16:32:37 -05:00
conftest.py
Add device support for dual-cavity range TP1X_DA-KS-RANGE-0101X (issue #324)
2026-08-09 00:58:26 +00:00
test_air_dresser_capabilities.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_air_dresser_tp1_21_capabilities.py
Fix more pre-existing ty diagnostics in test files
2026-08-03 00:03:08 +00:00
test_air_dresser_tp2_20_capabilities.py
Fix more pre-existing ty diagnostics in test files
2026-08-03 00:03:08 +00:00
test_air_monitor_capabilities.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_air_purifier_air_quality_statistics.py
Type air_monitor's particulates and migrate the recorded statistics
2026-08-15 01:01:49 +00:00
test_air_purifier_airflow_fan.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_air_purifier_airlevelcheck.py
review: floor the sensing interval at one minute
2026-08-04 14:44:54 +09:00
test_air_purifier_avt_ww.py
Stop double-converting filterUsage on AIR_FILTER/HEPA_FILTER (#330)
2026-08-09 00:37:09 +00:00
test_air_purifier_capabilities.py
Fix remaining pre-existing ty diagnostics in test files
2026-08-03 00:14:58 +00:00
test_air_purifier_fan_discriminator.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_air_purifier_vtww_fan.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_air_quality_grade_column.py
Fix PM unit codepoint and document the /sensors/vs/0 grade column
2026-08-15 00:23:53 +00:00
test_airconditioner_ailp_fac_capabilities.py
Load a config entry offline from the last discovery snapshot (#295)
2026-08-15 20:05:58 +00:00
test_airconditioner_artik051_krac.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_airconditioner_cac.py
Extract usable parts of PR #316 (System Fresh Air Ventilator support)
2026-08-07 16:38:09 +00:00
test_airconditioner_capabilities.py
airconditioner: ungate outdoor_temperature from is_legacy_board
2026-08-15 21:38:56 +00:00
test_airconditioner_tp1x_fac_time_23k.py
Add AC UV LED, ventilation alarm, and PM1 filter support (issue #270)
2026-08-03 19:07:03 +00:00
test_airconditioner_tp1x_rac_01001_fan.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_airconditioner_ventilation_windfree.py
Extract usable parts of PR #316 (System Fresh Air Ventilator support)
2026-08-07 16:38:09 +00:00
test_batch.py
Add NV9000D cooktop coverage and fix sensor setup
2026-08-04 14:47:42 +09:00
test_by_type_capabilities.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_by_type.py
Fix more pre-existing ty diagnostics in test files
2026-08-03 00:03:08 +00:00
test_capability.py
Fix remaining pre-existing ty diagnostics in test files
2026-08-03 00:14:58 +00:00
test_climate_ac_modes.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_climate_homecare_wizard.py
Fix HOMECARE_WIZARD_V2 false-positive warning and None entity_id log (#235)
2026-08-03 19:22:06 +00:00
test_climate_subdevice.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_climate_temperature_fallback.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_climate_wind_oscillation_fallback.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_climate_windfree.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_cloud_courses_flow.py
Harden the cloud-courses toggle against three review findings
2026-08-16 05:25:36 +00:00
test_cloud_courses.py
laundry: a payload sitting there is not evidence of when it got there
2026-08-10 10:16:00 +00:00
test_common_capabilities.py
Fix more pre-existing ty diagnostics in test files
2026-08-03 00:03:08 +00:00
test_cooktop_capabilities.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_coordinator_error_handling.py
Fix issues found by an Opus review of the smartthings-local upgrade
2026-08-14 18:43:44 +00:00
test_coordinator_raw_write.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_coordinator_send_command.py
AC: quantize subdevice temperature writes against their own step (Opus review)
2026-08-09 16:25:12 +00:00
test_dehumidifier_capabilities.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_dehumidifier_tp1x_dhm01001_capabilities.py
Add dehumidifier display switch and watertank lighting (issues #271, #231)
2026-08-03 18:59:22 +00:00
test_diagnostics_subdevices.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_discovery.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_dishwasher_capabilities.py
Drop dishwasher's drum_clean_last_cleaned sensor (#398)
2026-08-19 02:58:46 +00:00
test_dryer_capabilities.py
laundry: add Table_00 cycle labels for WF45R6300 washer and DVE45R6300 dryer
2026-08-12 15:25:54 +00:00
test_dryer_drum_clean.py
Fix ty type error in test_dryer_drum_clean.py
2026-08-03 19:38:57 +00:00
test_ehs_capabilities.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_end_to_end_v2.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_entities.py
Add NV9000D cooktop coverage and fix sensor setup
2026-08-04 14:47:42 +09:00
test_entity_naming.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_entity.py
Load a config entry offline from the last discovery snapshot (#295)
2026-08-15 20:05:58 +00:00
test_fixtures.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_fridge_capabilities.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_fridge_multi_instance.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_gas_cooktop_tp2x_ks_capabilities.py
Fix ty type-check failures in new test files
2026-08-07 15:52:46 +00:00
test_golden_regression.py
Address review: gate the AddWash master write on a readable mask
2026-08-19 19:41:13 +02:00
test_identity.py
Type-check the test suite, not just the component
2026-08-17 05:24:23 +00:00
test_induction_cooktop_capabilities.py
Add NV9000D cooktop coverage and fix sensor setup
2026-08-04 14:47:42 +09:00
test_laundry_capabilities.py
laundry: add Table_00 cycle labels for WF45R6300 washer and DVE45R6300 dryer
2026-08-12 15:25:54 +00:00
test_laundry_writes.py
Fix remaining pre-existing ty diagnostics in test files
2026-08-03 00:14:58 +00:00
test_learned_modes.py
Scope learning to the device, and simplify the store
2026-08-08 19:49:25 +00:00
test_microwave_capabilities.py
Fix more pre-existing ty diagnostics in test files
2026-08-03 00:03:08 +00:00
test_onebody_washer_subdevice.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_operational_capability.py
Normalize appliance enums for HA translations
2026-08-15 01:40:56 +00:00
test_oven_capabilities.py
Fix more pre-existing ty diagnostics in test files
2026-08-03 00:03:08 +00:00
test_oven_tp2x_ks_walloven_capabilities.py
Fix ty type-check failures in new test files
2026-08-07 15:52:46 +00:00
test_range_capabilities.py
Fix pre-existing ty diagnostics in a second batch of test files
2026-08-03 00:11:05 +00:00
test_range_hood_capabilities.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_range_hood_fan.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_range_ne63a6511_capabilities.py
Fix more pre-existing ty diagnostics in test files
2026-08-03 00:03:08 +00:00
test_range_ne6516a_capabilities.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_range_no_info_capabilities.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_range_tp1x_da_ks_range_0101x.py
Add device support for dual-cavity range TP1X_DA-KS-RANGE-0101X (issue #324)
2026-08-09 00:58:26 +00:00
test_redact.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_refrigerator_tp1x_ref_21k_airfilter_capabilities.py
Fix ty type-check failures in new test files
2026-08-07 15:52:46 +00:00
test_refrigerator_tp1x_ref_21k_autodoor_capabilities.py
Fix ty type-check failures in new tests (CI)
2026-08-09 01:25:23 +00:00
test_refrigerator_tp1x_ref_21k_kimchi_capabilities.py
Fix ty type-check failures in new tests (CI)
2026-08-09 01:25:23 +00:00
test_refrigerator_winecellar_capabilities.py
Fix ty type-check failures in new tests (CI)
2026-08-09 01:25:23 +00:00
test_registry_ignored.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_registry.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00
test_rekey_statistics_end_to_end.py
Cover the identity migration against what existing users can lose
2026-08-17 05:24:22 +00:00
test_select_display.py
laundry: fix six issues from review of the cloud-cycle branch
2026-08-10 03:16:07 +00:00
test_select_options.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_sensor_device_class_units.py
Fix PM unit codepoint and document the /sensors/vs/0 grade column
2026-08-15 00:23:53 +00:00
test_sensor_enum_options.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_sensor_hysteresis.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_sensor_sticky.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_services.py
Fix issues found by an Opus review of the smartthings-local upgrade
2026-08-14 18:43:44 +00:00
test_statistics_migration_end_to_end.py
Type air_monitor's particulates and migrate the recorded statistics
2026-08-15 01:01:49 +00:00
test_subdevice_discovery.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_subdevices.py
Format subdevice regression test
2026-08-10 15:23:43 +09:00
test_switch_device_class.py
water_purifier, range: drop invalid device_class='lock' from switches
2026-08-10 16:33:39 +00:00
test_translations.py
Relabel washer Table_02 06 from XXL Laundry to Bedding
2026-08-16 04:19:04 +00:00
test_unique_ids.py
Load a config entry offline from the last discovery snapshot (#295)
2026-08-15 20:05:58 +00:00
test_washer_add_wash.py
Address review: make the AddWash master switch's On idempotent
2026-08-20 06:56:47 +02:00
test_washer_capabilities.py
laundry: add Table_00 cycle labels for WF45R6300 washer and DVE45R6300 dryer
2026-08-12 15:25:54 +00:00
test_water_heater_ehs.py
Key devices on the OCF device ID instead of the serial number
2026-08-17 05:24:22 +00:00
test_water_purifier_capabilities.py
Add ruff (lint + format) and ty (type checking) to the project
2026-08-02 23:56:38 +00:00