Six new diagnostics dumps, six gaps closed:
- refrigerator: bind /diagnosis/vs/0 (reuse dishwasher.DIAGNOSIS -- same
shape) into the refrigerator registry; it was never wired up there,
tripping the coverage repair on any fridge that reports it (#20, #26).
- refrigerator: add PANTRY_ZONE for the Cool Select Zone pantry compartment
(/status/pantry/one/vs/0, x.com.samsung.da.mode/supportedOptions) -- same
shape as BEVERAGE_ZONE but a distinct resource/field set (#20).
- refrigerator: generalize FLEX_ZONE to identify the current mode by list
membership in supportedOptions instead of a hardcoded
CV_TTYPE_RF9000A_ prefix check. TP1X/Bespoke-class fridges use a
CV_FDR_ prefix instead, which the old code didn't recognize -- the
select existed but always read as unknown, and writing to it would have
appended a duplicate CV_FDR_ flag rather than replacing the existing one
(#26, #27; also closes#32).
- common: add energy_saved_kwh (x.com.samsung.da.cumulativeSavedPower) and
power_energy_kwh (x.com.samsung.da.cumulativeConsumption) to the shared
energy meter, plus fridge-only energy_last_month_kwh/energy_this_month_kwh
(monthlyConsumption/thismonthlyConsumption) -- all self-gating on field
presence (#26).
- by_type: add the WV consumer-model prefix (FlexWash twin washers, e.g.
WV55M9600AW) to the by-model fallback map. These report no oneUiVersion
and previously matched no prefix at all, so they fell all the way
through to the unrecognized-device registry with zero capabilities
bound (#19).
- washer: add a self-gating dry_level select to WASHER_SETTINGS for
washer/dryer combo units, which carry a writable dryLevel field
directly on /washer/vs/0 with no separate dryer resource or course
(#22).
The reset-water-filter button and "ice type vs. two named icemakers"
requests from #26/#27 are left alone -- no write contract or exclusivity
behavior is evidenced in either dump, and both icemakers report On
simultaneously on the Bespoke unit, so synthesizing a single-select would
be a guess rather than a fix.
Adds scrubbed fixtures + goldens for FlexWash, a washer/dryer combo,
ARTIK051_REF_17K, and TP2X_REF_20K, plus unit tests for the new/changed
capabilities.
- WV consumer-model prefix (FlexWash twin washers, e.g. WV55M9600AW)
wasn't in the by-model fallback map, so these units fell through to
the unknown-device registry with zero capabilities bound (#19).
- Washer/dryer combo units carry a writable dryLevel field directly on
/washer/vs/0 with no separate dryer resource; add a self-gating
select for it, off supportedDryLevel presence, so plain washers are
unaffected (#22).
Covers the air-conditioner support (#17) and the washer dosing-select /
diagnostics fixes (#9). main was still advertising 0.6.0 despite the AC work
already merging, so this moves it for the next release.
Quality-only cleanups on the air-conditioner support, no behavior change:
- climate.py: reuse common.normalize_temp_unit for the C/F unit read (also
handles the "Celsius"/"Fahrenheit" long forms); collapse the three
fan/swing/preset read properties into _read_mode/_read_modes and the three
write setters into _set_mapped, removing the copy-paste.
- Single source of truth for the climate-consumed hrefs: they lived both as
constants in climate.py and as a list in airconditioner.py. Declare them
once in airconditioner.py (HREF_* + CLIMATE_CONSUMED_HREFS, which also builds
the COVERAGE caps) and import them into climate.py, so a new sibling read
can't drift out of sync with its coverage entry.
Two fixes for issue #9 (WW90T634DHE washer):
- washer dosing selects: the four detergent/softener dosing selects read their
current value from `<Prefix>LevelCtrl_<code>` (un-padded, e.g. "3") but their
options from `Supported<Prefix>LevelCtrl_<hexpairs>` (zero-padded, e.g. "03").
HA's SelectEntity renders a select "unknown" whenever current_option is not in
options, so all four sat "unknown" (idle and running) even though every other
select worked -- which is why it was only those four. Normalize the current
value to the supported code with the same integer value so it matches an
option (and its translation); convert back to the device's native un-padded
format on write.
- diagnostics: pkg_version("smartthings-local") reads package metadata off disk
(listdir + open + read_text), tripping HA's event-loop blocking-call detector.
Offload it to the executor. Audited the rest of the package: config_flow's
socket/crypto and every coordinator DTLS call are already offloaded via
async_add_executor_job -- this was the only blocking call left on the loop.
Also documents air-conditioner support in the README (device table, capability
module list, platform list), missed when that support landed.
Updates the washer dosing tests to the corrected value/write format and adds a
current-option-is-a-valid-option regression; adds a diagnostics test asserting
the version lookup runs off the event loop.
Add support for Samsung room air conditioners (ARTIK051_PRAC-class), the
first device whose core controls map onto a single Home Assistant `climate`
entity rather than a scatter of switches/selects/numbers.
- New `climate` platform + `ClimateDesc`: one composite entity that reads
power, HVAC mode, current/target temperature, fan (wind) strength, swing
(wind direction) and the convenient-mode preset across several OCF
resources and writes back to each. On/off folds into HVACMode.OFF /
TURN_ON/OFF; convenient mode folds into preset_mode. The entity binds one
primary resource (/mode/vs/0) and reads its siblings from the coordinator
snapshot, reusing the cross-resource read pattern from number/select.
- New `airconditioner` capability module + by_type registry, routed via the
`_PRAC_` modelNum token. Reuses common ALARMS/ENERGY_METER,
fridge.FIRMWARE_UPDATE and dishwasher.DIAGNOSIS; air purify and auto clean
as config switches; air dust filter status/usage as diagnostics (usage
normalized to a percentage of rated capacity).
- Climate-consumed and all-zero/ambiguous resources (temperature/wind,
/sensors, /humidity) are declared as AC-scoped coverage so every href in
the dump binds or is covered -- no coverage-gap repair.
- Fan/swing modes map onto HA standard constants (auto-localized); the
custom fan `turbo`, presets `quiet/smart/speed`, and the filter-status
enum get translations in strings.json + translations/en.json.
- Scrubbed fixture, golden, and tests: registry routing, zero unbound
hrefs, the climate write contract, and filter-% normalization.
Review follow-up. An explicit exists_fn bypasses entity._is_included's
empty-{} stub carve-out, so the sentinel-aware energy meter would drop
power_watts/energy_kwh when /device/0 returns a not-yet-fetched stub for
/energy/consumption/vs/0. Restore the carve-out (`not rep or ...`), and
hide power_watts when instantaneousPower is absent from a populated rep
(not just when it's the -500 sentinel) so a partial rep can't spawn a
phantom power sensor.
First full dryer dump (issue #14, DV90BB5245AES1) surfaced 5 unbound
hrefs and an "incomplete capability coverage" repair. Handle them and,
while here, make the washer/dryer/dishwasher families consistent instead
of each carrying a bespoke variant of the same controls.
Dryer coverage:
- /power/0, /kidslock/0, /remotectrl/0: bind via the OCF-native + vendor
fallback pairs (prefer the standard OCF resource, fall back to -vs).
- /buzzersound/vs/0: new Buzzer sound select.
- /course/vs/0: cycle select shared with washer/dishwasher; ignore the
/st/dryercourse/vs/0 re-encoding (mirror of /st/washercourse/vs/0).
Consistency / de-duplication:
- Move generic OCF controls (power/kids-lock/remote-control fallback
pairs, energy meter) into common.py; every registry uses them.
- Move shared laundry controls (buzzer, job-beginning-status, and the
/course/vs/0 cycle-select machinery) into laundry.py; washer and
dishwasher stop hand-rolling their own copies.
- Energy meter is now sentinel-aware everywhere: the dead '-500'
instantaneousPower reading no longer shows a misleading 0 W (fixes it
on dryers and dishwashers, matching the earlier washer fix).
- Job-beginning-status reads x.com.samsung.da.currentStatus, the field
every dump actually carries; the dryer sensor was previously blank.
Adds a scrubbed dryer fixture, golden, and capability tests, plus an
.claude/skills/adding-device-support skill capturing the dump-reading,
OCF-vs-vendor, entity-taxonomy, and coverage workflow. Bumps to 0.6.0.
The config flow only probed 49154/49155, so appliances whose local
CoAP/DTLS API binds elsewhere in the ephemeral range (e.g. a dishwasher
answering on 49153) could never be added.
Add a fast UDP liveness sweep across 49152-49160 that uses the ICMP
port-unreachable / ECONNREFUSED asymmetry to find the live port(s)
before attempting the expensive DTLS handshake. Closed ports fall out
immediately; a live-but-silent port is kept as a candidate. The real
handshake then runs only against discovered ports, preferring the
historically known 49154/49155 when several look live.
Also drop the probe's /device/0 GET deadline from a bare 15s literal to
a named PROBE_GET_TIMEOUT_S constant (10s) — the slowest observed full
dump is ~8s, and 10s matches the per-resource read timeout used
elsewhere.
Bumps version to 0.5.0.
machine_state was rendering the raw lowercase OCF values (idle/active/
pause) untranslated in the UI. Add device_class=enum, options, and a
translation_key matching the existing pattern used by ice_making_status
and connection_mode, in both the shared operational.py capability and
oven.py's separate machine_state sensor.
Bump patch version for this fix plus the ice_type 'off' translation and
iot_class correction earlier on this branch.
The refrigerator fixture's x.com.samsung.da.iceType.supported list
includes "Off" alongside the whiskey_iceball_* values, but strings.json
only translated the whiskey_iceball options, leaving "Off" to render
untranslated in the ice-type select.
Coordinator prefers CoAP OBSERVE push notifications (observe.py) over
polling when the device supports it, falling back to polling only when
observe mode isn't available or drops.
Assumes the LevelCtrl code scheme is None/Low/Medium/High (00-03) on both
dispensers -- code 00 has no on-screen equivalent in the app's 3-choice
Faible/Moyen/Élevé picker, assumed to be what "Activation" off collapses
to -- and Level2Ctrl is Soft/Medium/Hard for detergent water hardness,
1x/2x/3x for softener concentration. detergent_quantity and
softener_quantity share one translation_key (same vocabulary), same
pattern as fridge.py's shared 'brightness_level' key.
Not cross-device verified: only one dump + screenshot set (issue #9) to go
on, and the softener concentration reading doesn't cleanly match its
screenshot (assumed to be a setting changed between dump and screenshots,
not a different code scheme -- see the comment in washer.py).
progress_percentage lacked the active-state gate already applied to
progress/cycle_active/finish_time, so it kept showing a stale device value
(e.g. 1%) while idle -- now zeroed the same way. Shared by dryer/dishwasher/
oven via operational.py's OPERATIONAL_STATE.
Also exposes detergent/softener auto-dispense quantity, water hardness/
concentration, and low-reservoir alarms from /course/vs/0's options array,
using the same decode/RMW helpers already used for course selection and
drum-clean tracking. Gated by exists_fn so washer models without these
fields (e.g. the existing test fixture) are unaffected.
Water consumption is unaffected -- common.WATER_METER is already wired
into the washer registry; this reporter's device just doesn't expose
/water/consumption/vs/0.
Washer (#6): instantaneousPower is a dead sentinel ('-500') on every
TP1-class washer dump collected so far, and cumulativePower is absent
outright on at least one model. WASHER_ENERGY_METER now hides both
sensors instead of showing a misleading "0 W"/perpetual "unavailable".
Fridge (#7): temperature sensors/setpoints hardcoded '°F', ignoring the
unit each device actually reports per-reading -- fixed via a new
unit_fn hook read live from the resource. Also corrects
DEFROST_BLOCK_STATUS's polarity (DEFROST_BLOCK_ON means actively
defrosting, not "blocked", confirmed against live dumps) and adds
REFRIGERATION_FALLBACK for /refrigeration/0, closing the last unbound
href surfaced by issue #7's diagnostic dump.
Oven: applies the same live-unit-reading fix defensively to
OVEN_SETPOINT, which shares the same aggregate resource shape.
Was left at 0.1.0 across the last two releases. Also de-hardcode the
diagnostics test's expected version so this doesn't happen again --
it now reads manifest.json directly instead of a copy-pasted literal.
Adds cycles-until-due and last-cleaned sensors decoded from the same
options[] array the course selector already reads (DrumCleanProposal_N -
WashingTimes_N for cycles remaining, DrumCleanLog_<iso> for last-cleaned),
verified byte-for-byte against a live app screenshot ("Potreba cistenia po
37 cykloch" / "Naposledy cistene pred 10 dnami").
Course selection is now a writable select entity sourced from each
device's own x.com.samsung.da.editCourseList (via a new options-as-callable
form on SelectDesc, reading the coordinator's full resource snapshot
instead of just the entity's own href), rather than a hardcoded course
table baked into Python. A MostUsed_ field on the same resource was
considered as a fallback but rejected after byte-level analysis showed it
doesn't reliably encode a course list. When a device never populates
editCourseList, the selector isn't created at all (exists_fn now takes
(rep, resources) to check a sibling href, matching the existing
match_fn(rep, resources) pattern).
Display names moved out of Python into strings.json/translations under
entity.select.{washer,dishwasher}_cycle.state.*, matching this
integration's existing translation_key convention (fridge.py's ice_type,
flex_zone_mode, etc.) instead of hardcoding English names in code.
discover() flagged /cycleinterface/vs/0, /drlc/0, and /operational/state/0
as unbound on real washer dumps, which would surface a spurious device
coverage gap for washer owners. All three are noise: cycleinterface is
empty on every dump seen, drlc/0 is an OCF-native duplicate of the
already-ignored /drlc/vs/0, and operational/state/0 is a read-only
OCF-native duplicate of /operational/state/vs/0 (already modeled by the
richer, write-capable operational.OPERATIONAL_STATE).
_normalize() lowercased every select's options/state for display, but
that's only needed for entities with a translation_key (whose
strings.json lookup requires lowercase keys, per hassfest). Untranslated
selects (Cycle, Smart Dry, Sound mode, LED brightness) had no lookup to
protect and were just getting mangled -- "AI Wash" became "ai wash",
"ExtraHigh" became "extrahigh", etc.
Replace with _display(), which only lowercases for translation_key
entities and otherwise passes the device's own casing through, with two
cosmetic fixups: a fully lowercase wire value (e.g. "voice") is
title-cased, and a PascalCase value (e.g. "ExtraHigh") gets a space at
the case boundary. Already human-friendly values pass through
untouched. Avoids hand-authoring strings.json translations for
open-ended, per-model option lists (e.g. dishwasher cycle names) that
would silently regress on any value we didn't enumerate.
x.com.samsung.da.delayStartTime is HH:MM:SS until the cycle starts
(e.g. "01:00" means 1 hour from pressing start), not a time of day. It
was wired up as a time entity with a suspicious hour % 24 wrap -- a
sign it was never really a clock time. Replace with a number entity
(0-24h, 1h steps) that reads/writes the field as elapsed hours.
Home Assistant 2026.3+ serves brand icons/logos for custom integrations
from a local brand/ directory before falling back to the CDN (see
developers.home-assistant.io/blog/2026/02/24/brands-proxy-api). Copied
Samsung's existing icon/logo assets from home-assistant/brands'
core_brands/samsung so the integration shows proper branding instead of
a placeholder. No manifest.json change needed -- has_branding is
auto-detected from the directory's presence.
Exposes whether a device is currently in observe (push) or poll mode,
for troubleshooting the observe-mode feature without digging through
logs. Disabled by default since it's not everyday-use information.
Replace the breadth/silence downgrade heuristic with a simpler rule: a
still-live OBSERVE session is never torn down on a sweep/cache mismatch
(the 30s sweep already corrects the cache regardless of mode) -- only a
proven reconnect invalidates subscriptions. A mismatch instead triggers
extra hot/warm subpolls this cycle as a bounded fallback.
Also stop treating a summary-poll block-level ACK timeout as session
death: distinguish TimeoutError (transfer was progressing, session
likely alive) from ConnectionError (session actually closed), backed by
a consecutive-timeout counter so a genuinely dead channel still
recovers. This was causing a flaky/slow device (e.g. a dishwasher) to
flap observe<->poll every ~45s on nothing but a slow blockwise GET.
Also remove the dead is_active/active_when scaffolding (never wired
into the coordinator) and add DEBUG logging for each OBSERVE notify
received, including its href.
A poll-failure-triggered reconnect while in observe mode left OBSERVE
silently dead: the new session had zero subscriptions, mode stayed
'observe' so the hot/warm sub-poll fallback stayed disabled, and the
ObserveRefreshTask kept retrying against the closed session instead of
the live one. Downgrading to poll mode on reconnect hands recovery to
the existing poll-mode retry path, which re-subscribes on the new
session.
Also snapshot ObserveManager._notified before intersecting it against
the subscribed set, closing a rare set-mutated-during-iteration race
between the DTLS reader thread (on_notification) and the executor
thread computing the grace-period success fraction.
Replace the ad-hoc option_names dicts (hardcoded English, manual
reverse-mapping) with the idiomatic HA approach: normalize raw Samsung
enum values to lowercase at the select/sensor boundary and let
strings.json/translations/en.json supply the display text, keyed by
the normalized value. select.py maps the chosen (lowercased) option
back to the device's original casing before writing. The ice-making
status sensor now also declares device_class=enum with an options
list, as HA expects for enum sensor state translations.
Also drop the hardcoded _BZONE_MODES list in favor of discovering
beverage zone modes from the device's own roomSupportedModes field,
matching how flex_zone_mode and ice_type already work.
hassfest rejects translation keys containing uppercase letters, but the
raw Samsung enum values for flex zone, beverage zone, ice type, and ice
making status are uppercase (e.g. CV_TTYPE_RF9000A_FREEZE). Follow the
existing dryer-course pattern instead: map raw device values to
human-readable names in Python via a new SelectDesc.option_names field
(mirrored read/write in select.py) and a value_fn for the sensor, and
drop the now-unused translation_key entries from strings.json/en.json.
- Add hacs.json and MIT LICENSE required for HACS/default-store inclusion
- Fill required manifest.json keys (documentation, issue_tracker,
codeowners) and reorder per hassfest's key-ordering rule
- Add validate.yml workflow running hassfest and HACS validation
- Update README install note now that hacs.json is checked in
Maps the fridge/dishwasher hrefs flagged by last session's coverage-gap
Repairs issue: defrost delay (switch) + block status (diagnostic binary
sensor), master ice-maker enable, self-check trigger/status, dishwasher
diagnosis trigger/status, and last-operation-source. Adds fallback
capabilities for /doors, /temperatures, and /icemaker/status that only
bind when the richer per-instance hrefs they duplicate are absent, so
simpler devices without those hrefs still get the data. Everything else
in the original gap list moves to capabilities.ignored (Bixby audio
feedback, inert DR/energy-planner resources, redundant metadata).
Fixes discover() reporting a known href as an unregistered gap whenever
its match_fn declined to bind for that device (e.g. a filter capability
on hardware without that filter) — it's now only a gap when no capability
is registered for the href at all.
Device naming now uses x.com.samsung.da.modelNum (not the OCF /oic/p,d
metadata, which produced inconsistent names like "[dishwasher] Samsung")
to build "Samsung <Type> (<model>)".
Marc Billow