Warn against hard-coding device-specific values in adding-device-support skill

Dumps capture one unit's snapshot, not the field's universe. Add a
dedicated section pointing at the existing options_field/range_field/
native_min_fn machinery for deriving select options and number
ranges/steps live from the device rep instead of transcribing values
from a single dump into Python literals.

.claude/skills/adding-device-support/SKILL.md

@@ -103,18 +103,77 @@ sub-polled between summary polls. Pick descriptor types from `entities.py`
 as a gap for a human, or ignore it with a documented reason — never invent an
 entity on a hunch (`ignored.py`'s rule).
 
-## 5. Enum selects need translation support
+## 5. Never hard-code the one dump's values
 
-Any select whose options are raw device codes (course/cycle, and code-valued
-settings) must render through translations, not Python:
-- Set `translation_key='<family>_cycle'` (or similar) on the `SelectDesc`;
-  `options`/`options_field` supply the **raw** codes.
-- Add the labels to **both** `strings.json` and `translations/en.json` under
-  `entity.select.<translation_key>.state.<code>`, with the code **lowercased**
-  (e.g. `"16": "Cotton"`). Codes with no entry render as the raw code — that's
-  the cue to identify and name them.
+A single `/device/0` dump is **one device on one firmware** — its select options,
+temperature range/increment, and any other "what values are valid here" data are
+**that unit's snapshot**, not the field's universe. Other units of the same model
+(different region, firmware, board revision) can support more, fewer, or
+differently-stepped values. If the dump reports the live option/range list, wire
+the descriptor to read it live — don't transcribe what you saw into a Python
+literal:
 
-## 6. Coverage discipline: bound or ignored
+- **Selects**: use `options_field` (a resource field holding the live options
+  list, e.g. `supportedWaterTemperature`, `iceType.supported`) so `select.py`
+  reads the current device's real options every time, not `options=(...)` typed
+  from the dump. Reach for a callable `options` only when the values require
+  cross-resource computation the field alone can't give you — a static tuple is
+  right only for genuinely fixed, spec-defined enums (e.g. an OCF-standard field
+  with a closed value set), never for vendor `supported*` lists.
+- **Number ranges/steps**: use `range_field` (a `[min, max]`-shaped field) or
+  `native_min_fn`/`native_max_fn`/`step_fn` to read bounds from the live rep —
+  see `oven.py`'s `_setpoint_bounds`. Only fall back to static `native_min`/
+  `native_max`/`step` when the dump has no such field and the bound is genuinely
+  fixed by spec, not just "the only value this one unit happened to report."
+- **Anywhere else** a field's presence, count, or shape looks like it could vary
+  by model/config (course lists, capability flags, supported-mode arrays):
+  check whether the resource carries its own `supported*` companion field before
+  assuming the observed value is exhaustive.
+
+When you do hard-code something (a genuinely fixed enum, a spec constant), that's
+a judgement call worth a one-line comment saying why it's safe — the default
+assumption should be "derive it," not "copy it."
+
+## 6. Names and enum labels live in translations, never in Python
+
+Descriptors have **no `name` field**. Every entity is named from the shipped
+catalog, keyed by `translation_key` — which defaults to the descriptor's own
+`key`. So adding `SensorDesc(key='filter_status', ...)` obliges you to add:
+
+```json
+"entity": { "sensor": { "filter_status": { "name": "Filter status" } } }
+```
+
+to `translations/en.json`. Skip it and the entity ships nameless;
+`tests/test_translations.py` fails the build instead.
+
+- **Sentence case** ("Filter status", not "Filter Status"), per HA's style
+  guide — capitalize only proper nouns and Samsung feature names ("AI Energy
+  Mode", "Storm Wash+").
+- Set `translation_key` explicitly only to **share** one catalog entry across
+  descriptors, or to point at a differently-named one. Two descriptors on the
+  same platform with the same `key` already share an entry — intended for
+  `common.py`'s OCF/vendor fallback pairs, a silent mislabel otherwise.
+- Prefer HA's own vocabulary where it fits: a `device_class` gives you
+  translated states for free (`binary_sensor` door/running, `sensor`
+  timestamp/enum), so don't restate them.
+
+Selects whose options are raw device codes (course/cycle, code-valued
+settings) additionally need those codes labelled:
+- `options`/`options_field` supply the **raw** codes; the catalog maps them.
+- Add labels under `entity.select.<translation_key>.state.<code>`, code
+  **lowercased** (e.g. `"16": "Cotton"`). `select.py` derives which values it
+  normalizes from the catalog itself, so there is no Python list to keep in
+  sync — a code with no entry simply renders as the raw code, which is the cue
+  to identify and name it.
+
+`translations/en.json` is the only place any of this lives: there is no
+`strings.json` (Home Assistant doesn't read one from a custom integration) and
+no `[%key:...%]` resolution (that's Core build tooling). Every other language
+must mirror `en.json` key for key — also enforced by
+`tests/test_translations.py`.
+
+## 7. Coverage discipline: bound or ignored
 
 Every href in the dump must resolve, or the repair fires. If a resource isn't
 worth an entity, add it to `capabilities/ignored.py` (a no-entity `Capability`)
@@ -128,7 +187,7 @@ friendlier href**.
   ignored because washers bind it. When only one family should ignore an href
   that another binds, scope the ignore to that family's registry.
 
-## 7. Reuse before writing new code
+## 8. Reuse before writing new code
 
 Check `common.py` (generic OCF: power, energy, alarms, water) and `laundry.py`
 (shared washer/dryer/dishwasher: buzzer, job status, `cycle_select` + course
@@ -137,7 +196,7 @@ registry uses `fridge.FIRMWARE_UPDATE`; all three laundry families share
 `laundry.cycle_select`. If two families hand-roll the same helper, hoist it to a
 shared module rather than copying.
 
-## 8. Lock it in
+## 9. Lock it in
 
 1. Add a **scrubbed** fixture `tests/fixtures/<type>_device.json`
    (`{"device0": [ {devcol rep}, {href, rep}, ... ]}`) — replace serials, MACs,

README.md

@@ -1,3 +1,8 @@
+<!-- dark mode -->
+<img src="custom_components/localthings/brand/dark_logo@2x.png#gh-dark-mode-only" alt="LocalThings Logo"/>
+<!-- light mode -->
+<img src="custom_components/localthings/brand/logo@2x.png#gh-light-mode-only" alt="LocalThings Logo"/>
+
 # LocalThings
 
 **A native Home Assistant custom integration for local control of newer-generation Samsung connected appliances.** No cloud round-trip. Add a device through HA's normal *Settings > Devices & Services* flow and it talks CoAP-over-DTLS straight to the appliance on your LAN.
@@ -17,8 +22,12 @@ Your state stays on your LAN: HA talks to the appliance over a direct DTLS sessi
 | Type | Registry |
 |---|---|
 | Air conditioner | `by_type/airconditioner.py` |
+| Air purifier | `by_type/air_purifier.py` |
 | Dryer | `by_type/dryer.py` |
 | Oven | `by_type/oven.py` |
+| Cooktop (read-only burner status) | `by_type/cooktop.py` |
+| Range hood | `by_type/range_hood.py` |
+| Range | `by_type/range.py` |
 | Dishwasher | `by_type/dishwasher.py` |
 | Refrigerator | `by_type/refrigerator.py` |
 | Washer | `by_type/washer.py` |
@@ -100,9 +109,12 @@ custom_components/localthings/
   diagnostics.py           Redacted diagnostics download (device state + coverage metadata)
   const.py                 Domain, config keys, probe ports
   entity.py                Base entity wiring capability registry -> HA entity
-  sensor.py / binary_sensor.py / switch.py / number.py / select.py / button.py / time.py / climate.py
+  sensor.py / binary_sensor.py / switch.py / number.py / select.py / button.py / time.py / fan.py / climate.py
                             One module per HA platform
-  strings.json / translations/   Config-flow copy + entity state translations
+  catalog.py               Reads the shipped translation catalog (which keys/states exist)
+  translations/            Config-flow copy + entity name/state translations, one file per
+                            language; en.json is the source of truth (no strings.json —
+                            Home Assistant never reads one from a custom integration)
   registry/
     registry.py             Builds the global capability registry, validates href collisions
     capability.py           Capability dataclass (href, entities, transforms)
@@ -112,7 +124,8 @@ custom_components/localthings/
     identity.py              Reads device identity for type detection
     redact.py                 Strips account/identity data before diagnostics leave HA
     capabilities/             Shared + per-family Capability definitions (common, airconditioner,
-                               dryer, oven, dishwasher, fridge, washer, laundry, operational, ignored)
+                               cooktop, range_hood, dryer, oven, dishwasher, fridge, washer,
+                               laundry, operational, ignored)
     by_type/                  One DeviceRegistry per appliance type, composed from capabilities/
 tests/                    Registry composition, discovery, entity descriptors, coordinator/observe
                             behavior, and golden-file regression against captured device dumps
@@ -138,7 +151,7 @@ support for hardware the maintainers don't have.
 1. Get a capture of the appliance's `/device/0` response. The easiest way: add the device to HA (type detection failing is fine) and pull its Diagnostics download from Settings > Devices & Services > the device > the menu > Download diagnostics — it already contains a redacted dump of the device's resources.
 2. Reuse existing `Capability` objects from `registry/capabilities/` wherever the resource matches one already declared. Most `common.py` capabilities (power, kids lock, remote control, alarms, energy/water meters) are shared verbatim across families; add new ones only for resources unique to the new type.
 3. Create `registry/by_type/<name>.py` with a `DeviceRegistry(name=..., capabilities=_build([...]))`. Use `pattern_capabilities` instead of `capabilities` for any resource whose `href` isn't fixed (for example per-compartment fridge resources); see `refrigerator.py` for the pattern.
-4. Register it in `_REGISTRY_BY_KEY` in `registry/by_type/__init__.py`, keyed on the lowercased, space/hyphen-to-underscore-converted suffix of the device's `oneUiVersion` string (see `_type_key()` in that file for the exact transform). If the device never reports `oneUiVersion` — confirmed true for washers — add its consumer-model prefix to `_CONSUMER_PREFIX_TO_KEY` instead, so `for_device_by_model()` can route it.
+4. Register it in `_REGISTRY_BY_KEY` in `registry/by_type/__init__.py`, keyed on the lowercased, space/hyphen-to-underscore-converted suffix of the device's `oneUiVersion` string (see `_type_key()` in that file for the exact transform). If the device never reports `oneUiVersion`, add its consumer-model prefix to `_CONSUMER_PREFIX_TO_KEY` so `for_device_by_model()` can route it. If it also omits `/information/vs/0` (as the verified NA9300K cooktop does), add a distinctive, conservative resource-signature rule to `for_device_by_resources()`.
 5. Add golden-file coverage in `tests/` against a captured `/device/0` dump for the new type.
 
 No config-flow changes are needed. Device-type detection and entity wiring are fully driven by the registry.

custom_components/localthings/catalog.py

@@ -0,0 +1,49 @@
+"""The integration's own shipped translation catalog, as data.
+
+Home Assistant loads exactly one file per language for a custom integration:
+``translations/<lang>.json``. It does not read ``strings.json`` and it does
+not resolve ``[%key:...%]`` references -- both of those belong to Core's
+build tooling (``script/translations``), which custom integrations never run
+through. So ``translations/en.json`` is not a generated artifact here, it is
+the source of truth, and English is the one catalog required to be complete
+(hassfest validates it for custom integrations).
+
+That makes the English catalog the authority on *which* translation keys and
+states exist, which is something the Python side genuinely needs to know:
+
+  * ``select`` has to decide whether to normalize a raw Samsung option into
+    a lowercase state key (so Home Assistant can look it up) or leave the
+    vendor's own casing alone as a readable fallback.
+  * ``laundry.cycle_select`` has to decide whether a device-reported course
+    table has translations at all before keying off it.
+
+Reading it from the catalog instead of restating it in Python means adding a
+state or a course table is a one-file change, and the two can't drift.
+"""
+from __future__ import annotations
+
+import json
+from pathlib import Path
+
+# Read at import, not lazily: custom integrations are imported in an executor
+# thread, so this stays off the event loop no matter who asks first.
+_ENTITY_CATALOG: dict[str, dict[str, dict]] = json.loads(
+    (Path(__file__).parent / 'translations' / 'en.json').read_text(encoding='utf-8')
+).get('entity', {})
+
+
+def has_entity_translation(platform: str, translation_key: str) -> bool:
+    """Whether `platform`.`translation_key` has an entry in the catalog."""
+    return translation_key in _ENTITY_CATALOG.get(platform, {})
+
+
+def translated_states(platform: str, translation_key: str) -> frozenset[str]:
+    """The state keys translated for `platform`.`translation_key`.
+
+    Empty when the entity has no translation at all, and also when it has a
+    translated *name* but deliberately no state table (a course list whose
+    codes we can't map, for instance) -- callers treat both the same way:
+    leave the device's value untouched.
+    """
+    entry = _ENTITY_CATALOG.get(platform, {}).get(translation_key)
+    return frozenset(entry.get('state', ())) if entry else frozenset()

custom_components/localthings/climate.py

@@ -13,9 +13,10 @@ snapshot via `coordinator.resource(href)` -- the same cross-resource read that
 
 Writes go through `coordinator.async_send_command(bound, (kind, value))`: the
 CLIMATE capability's `write_fn` maps each `(kind, value)` payload to the right
-`(path_segs, body)`, and `async_send_command` POSTs to those path_segs (the
-bound href is only used for logging), so one descriptor drives writes to power,
-mode, temperature and wind resources.
+`(path_segs, body)`, and `async_send_command` POSTs to those path_segs and
+applies the optimistic value/settle guard to that same href -- not the bound
+`/mode/vs/0` href -- so one descriptor drives writes to, and gets fresh state
+back for, power, mode, temperature and wind resources alike.
 """
 from __future__ import annotations
 
@@ -41,6 +42,7 @@ from .registry.capabilities.airconditioner import (
     HREF_TEMP_CURRENT as TEMP_CURRENT_HREF,
     HREF_TEMP_DESIRED as TEMP_DESIRED_HREF,
     HREF_TEMP_CONTROL as TEMP_CONTROL_HREF,
+    HREF_TEMPS_VS as TEMPS_VS_HREF,
     HREF_WIND_STRENGTH as WIND_STRENGTH_HREF,
     HREF_WIND_DIRECTION as WIND_DIRECTION_HREF,
     HREF_CONVENIENT as CONVENIENT_HREF,
@@ -125,6 +127,22 @@ def _num(value):
         return None
 
 
+def _temps_vs_item(rep: dict) -> dict:
+    """First item of the vendor `/temperatures/vs/0` items[] array.
+
+    Newer AC firmware (Tizen Lite, oneUiVersion "7.0 Air conditioner", e.g.
+    model TP1X_DA-AC-RAC-01011) does NOT expose the OCF-standard
+    /temperature/current/0 + /temperature/desired/0 pair; it reports current
+    and target under a single `/temperatures/vs/0` resource whose
+    `x.com.samsung.da.items[0]` carries current/desired/minimum/maximum/
+    increment/unit. Returns {} when absent, so callers fall through cleanly.
+    """
+    items = rep.get('x.com.samsung.da.items')
+    if isinstance(items, (list, tuple)) and items and isinstance(items[0], dict):
+        return items[0]
+    return {}
+
+
 class LocalThingsClimate(LocalThingsEntity, ClimateEntity):
     """Composite climate entity for a Samsung air conditioner."""
 
@@ -172,24 +190,41 @@ class LocalThingsClimate(LocalThingsEntity, ClimateEntity):
 
     # -- temperature --------------------------------------------------------
 
+    def _temps_vs(self) -> dict:
+        """Vendor `/temperatures/vs/0` items[0] (empty {} when absent)."""
+        return _temps_vs_item(self._rep(TEMPS_VS_HREF))
+
     @property
     def temperature_unit(self) -> str:
         raw = self._rep(TEMP_DESIRED_HREF).get('units')
+        if raw is None:
+            raw = self._temps_vs().get('x.com.samsung.da.unit')
         return (UnitOfTemperature.FAHRENHEIT
                 if normalize_temp_unit(raw, '°C') == '°F'
                 else UnitOfTemperature.CELSIUS)
 
     @property
     def current_temperature(self):
-        return _num(self._rep(TEMP_CURRENT_HREF).get('temperature'))
+        v = _num(self._rep(TEMP_CURRENT_HREF).get('temperature'))
+        if v is None:
+            v = _num(self._temps_vs().get('x.com.samsung.da.current'))
+        return v
 
     @property
     def target_temperature(self):
-        return _num(self._rep(TEMP_DESIRED_HREF).get('temperature'))
+        v = _num(self._rep(TEMP_DESIRED_HREF).get('temperature'))
+        if v is None:
+            v = _num(self._temps_vs().get('x.com.samsung.da.desired'))
+        return v
 
     def _range(self) -> list | None:
         r = self._rep(TEMP_DESIRED_HREF).get('range')
-        return r if (isinstance(r, (list, tuple)) and len(r) == 2) else None
+        if isinstance(r, (list, tuple)) and len(r) == 2:
+            return r
+        item = self._temps_vs()
+        lo = _num(item.get('x.com.samsung.da.minimum'))
+        hi = _num(item.get('x.com.samsung.da.maximum'))
+        return [lo, hi] if (lo is not None and hi is not None) else None
 
     @property
     def min_temp(self) -> float:
@@ -203,7 +238,10 @@ class LocalThingsClimate(LocalThingsEntity, ClimateEntity):
 
     @property
     def target_temperature_step(self) -> float:
-        return _num(self._rep(TEMP_CONTROL_HREF).get('increment')) or 1.0
+        return (_num(self._rep(TEMP_CONTROL_HREF).get('increment'))
+                or _num(self._rep(TEMP_CONTROL_HREF).get('x.com.samsung.da.increment'))
+                or _num(self._temps_vs().get('x.com.samsung.da.increment'))
+                or 1.0)
 
     # -- hvac mode ----------------------------------------------------------
 

custom_components/localthings/config_flow.py

@@ -2,6 +2,7 @@
 from __future__ import annotations
 
 import datetime
+import json
 import logging
 import re
 import selectors
@@ -12,8 +13,13 @@ from typing import Any
 
 import voluptuous as vol
 from homeassistant import config_entries
+from homeassistant.core import callback
 from homeassistant.data_entry_flow import FlowResult
 from homeassistant.helpers.selector import (
+    ObjectSelector,
+    SelectSelector,
+    SelectSelectorConfig,
+    SelectSelectorMode,
     TextSelector,
     TextSelectorConfig,
     TextSelectorType,
@@ -24,6 +30,7 @@ from .const import (
     CONF_HOST, CONF_PORT,
     CONF_CA_CERT_PEM, CONF_CA_KEY_PEM,
     CONF_LEAF_CERT_PEM, CONF_LEAF_KEY_PEM,
+    CONF_BYPASS_REMOTE_CONTROL,
     PROBE_PORT_RANGE, PREFERRED_PROBE_PORTS, LIVENESS_PROBE_TIMEOUT_S,
     PROBE_GET_TIMEOUT_S,
 )
@@ -195,7 +202,9 @@ def _probe_and_validate(host: str, ca_cert_pem: str, ca_key_pem: str) -> dict:
     import cbor2
     from smartthings_local.protocol.dtls_session import DtlsCoapSession
     from .registry.batch import parse_device0_batch
-    from .registry.by_type import for_device, for_device_by_model
+    from .registry.by_type import (
+        for_device, for_device_by_model, for_device_by_resources,
+    )
 
     _LOGGER.debug("Fetching Samsung cloud UUID from %s", _SAMSUNG_CLOUD_HOST)
     try:
@@ -266,7 +275,7 @@ def _probe_and_validate(host: str, ca_cert_pem: str, ca_key_pem: str) -> dict:
             ) or for_device_by_model(
                 info_resource.get('x.com.samsung.da.modelNum', ''),
                 info_resource.get('x.com.samsung.da.description', ''),
-            )
+            ) or for_device_by_resources(resources)
             return {
                 "port": port,
                 "serial": serial,
@@ -298,6 +307,13 @@ class LocalThingsConfigFlow(config_entries.ConfigFlow, domain=DOMAIN):
         self._ca_key_pem: str = ""
         self._pending_info: dict | None = None
 
+    @staticmethod
+    @callback
+    def async_get_options_flow(
+        config_entry: config_entries.ConfigEntry,
+    ) -> LocalThingsOptionsFlow:
+        return LocalThingsOptionsFlow()
+
     def _create_entry(self, info: dict) -> FlowResult:
         return self.async_create_entry(
             title=f"Samsung Appliance ({self._host})",
@@ -352,22 +368,27 @@ class LocalThingsConfigFlow(config_entries.ConfigFlow, domain=DOMAIN):
 
         if has_creds:
             schema = vol.Schema({vol.Required(CONF_HOST): _TEXT})
-            reuse_note = "CA credentials will be reused from the existing device."
+            step_id = "user_reuse"
         else:
             schema = vol.Schema({
                 vol.Required(CONF_HOST):        _TEXT,
                 vol.Required(CONF_CA_CERT_PEM): _MULTILINE,
                 vol.Required(CONF_CA_KEY_PEM):  _MULTILINE,
             })
-            reuse_note = ""
+            step_id = "user"
 
         return self.async_show_form(
-            step_id="user",
+            step_id=step_id,
             data_schema=schema,
             errors=errors,
-            description_placeholders={"reuse_note": reuse_note},
         )
 
+    async def async_step_user_reuse(
+        self, user_input: dict[str, Any] | None = None
+    ) -> FlowResult:
+        """Handle the localized host-only form for additional appliances."""
+        return await self.async_step_user(user_input)
+
     async def async_step_confirm_unknown_type(
         self, user_input: dict[str, Any] | None = None
     ) -> FlowResult:
@@ -375,10 +396,167 @@ class LocalThingsConfigFlow(config_entries.ConfigFlow, domain=DOMAIN):
         if user_input is not None:
             return self._create_entry(self._pending_info)
 
+        if not self._pending_info["one_ui_version"]:
+            return await self.async_step_confirm_unknown_type_no_version()
+
         return self.async_show_form(
             step_id="confirm_unknown_type",
             data_schema=vol.Schema({}),
             description_placeholders={
-                "one_ui_version": self._pending_info["one_ui_version"] or "(none reported)",
+                "one_ui_version": self._pending_info["one_ui_version"],
             },
         )
+
+    async def async_step_confirm_unknown_type_no_version(
+        self, user_input: dict[str, Any] | None = None
+    ) -> FlowResult:
+        """Confirm an unknown appliance that did not report oneUiVersion."""
+        if user_input is not None:
+            return self._create_entry(self._pending_info)
+        return self.async_show_form(
+            step_id="confirm_unknown_type_no_version",
+            data_schema=vol.Schema({}),
+        )
+
+
+class LocalThingsOptionsFlow(config_entries.OptionsFlow):
+    """Per-device options: the remote-control-off write-block override
+    (issue #54) plus a debug panel for writing an arbitrary body to an
+    arbitrary resource href, so a user can pin down device-specific write
+    behavior without waiting on a new release.
+
+    The remote-control override exists because most devices reject writes
+    outright while remote control is off and a clear error beats a silent
+    device-side rejection -- but not every model actually enforces that,
+    so this lets a user who's confirmed their device accepts writes anyway
+    turn the block off for just that device rather than it being
+    hardcoded on for everyone. The debug panel goes further: it bypasses
+    that block (and every write_fn/validate_fn) entirely, sending exactly
+    the body the user types to whatever href they pick.
+    """
+
+    def __init__(self) -> None:
+        self._debug_href: str = ""
+        self._debug_result: tuple[int, dict] | None = None
+
+    def _coordinator(self):
+        return self.hass.data.get(DOMAIN, {}).get(self.config_entry.entry_id)
+
+    async def async_step_init(
+        self, user_input: dict[str, Any] | None = None
+    ) -> FlowResult:
+        return self.async_show_menu(
+            step_id="init",
+            menu_options=["settings", "debug_write"],
+        )
+
+    async def async_step_settings(
+        self, user_input: dict[str, Any] | None = None
+    ) -> FlowResult:
+        if user_input is not None:
+            return self.async_create_entry(data=user_input)
+
+        return self.async_show_form(
+            step_id="settings",
+            data_schema=vol.Schema({
+                vol.Required(
+                    CONF_BYPASS_REMOTE_CONTROL,
+                    default=self.config_entry.options.get(
+                        CONF_BYPASS_REMOTE_CONTROL, False
+                    ),
+                ): bool,
+            }),
+        )
+
+    async def async_step_debug_write(
+        self, user_input: dict[str, Any] | None = None
+    ) -> FlowResult:
+        coord = self._coordinator()
+        if coord is None:
+            return self.async_abort(reason="not_loaded")
+
+        if user_input is not None:
+            self._debug_href = user_input["href"]
+            return await self.async_step_debug_edit()
+
+        hrefs = sorted(coord.last_resources.keys())
+        return self.async_show_form(
+            step_id="debug_write",
+            data_schema=vol.Schema({
+                vol.Required("href"): SelectSelector(SelectSelectorConfig(
+                    options=hrefs,
+                    custom_value=True,
+                    mode=SelectSelectorMode.DROPDOWN,
+                )),
+            }),
+        )
+
+    def _show_debug_edit_form(
+        self, href: str, current: dict, errors: dict[str, str], payload,
+    ) -> FlowResult:
+        return self.async_show_form(
+            step_id="debug_edit",
+            data_schema=vol.Schema({
+                vol.Required(
+                    "payload", default=(payload if payload is not None else {}),
+                ): ObjectSelector(),
+            }),
+            errors=errors,
+            description_placeholders={
+                "href": href,
+                "current_value": (
+                    json.dumps(current, indent=2, ensure_ascii=False)
+                    if current else "{}"
+                ),
+            },
+        )
+
+    async def async_step_debug_edit(
+        self, user_input: dict[str, Any] | None = None
+    ) -> FlowResult:
+        coord = self._coordinator()
+        if coord is None:
+            return self.async_abort(reason="not_loaded")
+
+        href = self._debug_href
+        current = coord.resource(href)
+
+        if user_input is not None:
+            payload = user_input.get("payload") or {}
+            if not isinstance(payload, dict) or not payload:
+                return self._show_debug_edit_form(
+                    href, current, {"payload": "empty_payload"}, payload
+                )
+            try:
+                code, new_rep = await coord.async_raw_write(href, payload)
+            except Exception:  # noqa: BLE001 - surfaced to the user below
+                _LOGGER.exception("debug raw write failed for %s", href)
+                return self._show_debug_edit_form(
+                    href, current, {"base": "write_failed"}, payload
+                )
+            self._debug_result = (code, new_rep)
+            return await self.async_step_debug_result()
+
+        return self._show_debug_edit_form(href, current, {}, None)
+
+    async def async_step_debug_result(
+        self, user_input: dict[str, Any] | None = None
+    ) -> FlowResult:
+        code, new_rep = self._debug_result or (0, {})
+        return self.async_show_menu(
+            step_id="debug_result",
+            menu_options=["debug_write", "finish"],
+            description_placeholders={
+                "code": f"{code >> 5}.{code & 0x1f:02d} ({code:#04x})",
+                "new_value": (
+                    json.dumps(new_rep, indent=2, ensure_ascii=False)
+                    if new_rep else "{}"
+                ),
+            },
+        )
+
+    async def async_step_finish(
+        self, user_input: dict[str, Any] | None = None
+    ) -> FlowResult:
+        # Close the flow without altering saved options.
+        return self.async_create_entry(data=dict(self.config_entry.options))

custom_components/localthings/const.py

@@ -1,6 +1,9 @@
 DOMAIN = "localthings"
 
-PLATFORMS = ["sensor", "binary_sensor", "switch", "number", "select", "button", "time", "climate"]
+PLATFORMS = [
+    "sensor", "binary_sensor", "switch", "number", "select", "button",
+    "time", "climate", "fan",
+]
 
 CONF_HOST         = "host"
 CONF_PORT         = "port"
@@ -9,6 +12,16 @@ CONF_CA_KEY_PEM   = "ca_key_pem"
 CONF_LEAF_CERT_PEM = "leaf_cert_pem"
 CONF_LEAF_KEY_PEM  = "leaf_key_pem"
 
+# Options-flow key (entry.options, not entry.data): lets a user override the
+# device-wide remote-control-off write block for a specific device (issue
+# #54). Some devices report remote control off yet still accept certain
+# writes (e.g. default detergent/softener dosing on a washer, applied even
+# to the built-in programs) -- the block exists to give a clear error
+# instead of a silent device-side rejection, but that assumption doesn't
+# hold for every model. Defaults to False (block stays on) everywhere it's
+# read, so devices this doesn't apply to see no behavior change.
+CONF_BYPASS_REMOTE_CONTROL = "bypass_remote_control_lock"
+
 # The DTLS/CoAP local API binds somewhere in this ephemeral range; which port
 # depends on firmware. Newer builds answer on 49154/49155, but older ones have
 # been seen as low as 49153, so we sweep the whole range for a live UDP port

custom_components/localthings/coordinator.py

@@ -12,6 +12,7 @@ import cbor2
 
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant, callback
+from homeassistant.exceptions import ServiceValidationError
 from homeassistant.helpers import issue_registry as ir
 from homeassistant.helpers.update_coordinator import DataUpdateCoordinator, UpdateFailed
 from homeassistant.helpers.device_registry import DeviceInfo
@@ -20,7 +21,8 @@ from smartthings_local.protocol.dtls_session import DtlsCoapSession
 from smartthings_local.ocf.state_cache import StateCache
 
 from .registry.batch import parse_device0_batch
-from .registry.by_type import for_device, for_device_by_model
+from .registry.by_type import for_device, for_device_by_model, for_device_by_resources
+from .registry.capabilities.common import merge_options_field, remote_control_enabled
 from .registry.discovery import discover, BoundEntity
 from .registry import CAPABILITIES
 from .registry.adapter import flatten
@@ -29,14 +31,13 @@ from .observe import ObserveManager, MODE_OBSERVE, MODE_POLL, GRACE_PERIOD_S
 
 from .const import (
     DOMAIN, CONF_HOST, CONF_PORT, CONF_LEAF_CERT_PEM, CONF_LEAF_KEY_PEM,
-    DEVICE_SUPPORT_ISSUE_URL, SUMMARY_INTERVAL_S,
+    CONF_BYPASS_REMOTE_CONTROL, DEVICE_SUPPORT_ISSUE_URL, SUMMARY_INTERVAL_S,
 )
 
 _LOGGER = logging.getLogger(__name__)
 
 _SEED_PATH = ['device', '0']
 
-
 class _NoOpDescriptor:
     """StateCache requires a descriptor with an on_observation hook. This
     integration doesn't use per-capability observation hooks, so this is a
@@ -69,6 +70,14 @@ class LocalThingsCoordinator(DataUpdateCoordinator[dict[str, Any]]):
     # fine session shouldn't tear down a working OBSERVE subscription.
     _POLL_TIMEOUT_LIMIT: int = 3
 
+    # Timeouts for the two network round trips a write triggers: the PUT
+    # itself (_do_put), then the confirming full /device/0 summary poll
+    # async_send_command requests right after (_poll_once). Named here
+    # (rather than left as inline literals) so the write-settle window
+    # below can be sized to always outlast both — see async_send_command.
+    _POST_TIMEOUT_S: float = 8.0
+    _POLL_TIMEOUT_S: float = 35.0
+
     def __init__(self, hass: HomeAssistant, entry: ConfigEntry) -> None:
         # Per-device logger (module logger scoped to this device's host) so
         # every log line — including the base DataUpdateCoordinator's own
@@ -203,7 +212,7 @@ class LocalThingsCoordinator(DataUpdateCoordinator[dict[str, Any]]):
             # would have succeeded, not a dead session. 35s gives a slow
             # blockwise transfer room to actually finish instead of
             # generating a TimeoutError every cycle.
-            code, payload = sess.get(_SEED_PATH, timeout=35.0)
+            code, payload = sess.get(_SEED_PATH, timeout=self._POLL_TIMEOUT_S)
         except TimeoutError:
             raise
         except Exception as e:
@@ -287,6 +296,8 @@ class LocalThingsCoordinator(DataUpdateCoordinator[dict[str, Any]]):
                 info.get('x.com.samsung.da.modelNum', ''),
                 info.get('x.com.samsung.da.description', ''),
             )
+        if reg is None:
+            reg = for_device_by_resources(resources)
         unbound: list[str] = []
         if reg is not None:
             self._log.debug("device type: %s (oneUiVersion=%r)", reg.name, one_ui)
@@ -306,7 +317,7 @@ class LocalThingsCoordinator(DataUpdateCoordinator[dict[str, Any]]):
         self.device_serial = serial
 
         ident = self._identity
-        device_type = reg.name.title() if reg else 'Appliance'
+        device_type = reg.name.replace('_', ' ').title() if reg else 'Appliance'
         model_num = info.get('x.com.samsung.da.modelNum', '')
         model = model_num.split('|', 1)[0] if model_num else (ident.model if ident else '')
         name  = f"Samsung {device_type} ({model})" if model else f"Samsung {device_type}"
@@ -509,30 +520,190 @@ class LocalThingsCoordinator(DataUpdateCoordinator[dict[str, Any]]):
 
     async def async_send_command(self, bound_entity: BoundEntity,
                                  payload: Any) -> None:
-        """Write a value to the device. Fire-and-forget style."""
+        """Write a value to the device. Fire-and-forget style.
+
+        A description-level validate_fn (currently SwitchDesc only) runs
+        here rather than per-platform, so rejecting a write with a
+        user-facing message -- as opposed to write_fn's silent no-op below
+        -- is available to every platform for free. The remote-control
+        check runs first and applies to every platform unconditionally,
+        ahead of any description-specific validate_fn -- unless the user has
+        opted this device out of it via CONF_BYPASS_REMOTE_CONTROL (issue
+        #54: some devices accept certain writes, e.g. a washer's default
+        dosing levels, even while reporting remote control off, so the
+        block's assumption doesn't hold for every model)."""
         desc = bound_entity.desc
         write_fn = getattr(desc, 'write_fn', None)
         if write_fn is None:
             return
         href = bound_entity.href
         rep = self._cache.get(href or '') or {}
+        resources = self._cache.snapshot()
+        bypass_remote_control = self._entry.options.get(CONF_BYPASS_REMOTE_CONTROL, False)
+        if not bypass_remote_control and not remote_control_enabled(resources):
+            raise ServiceValidationError(
+                translation_domain=DOMAIN,
+                translation_key="remote_control_disabled",
+            )
+        validate_fn = getattr(desc, 'validate_fn', None)
+        if validate_fn is not None:
+            error = validate_fn(payload, rep, resources)
+            if error:
+                raise ServiceValidationError(
+                    translation_domain=DOMAIN,
+                    translation_key=error,
+                )
         result = write_fn(payload, rep, href)
         if result is None:
             self._log.warning("write_fn rejected payload %r for %s", payload, href)
             return
         path_segs, body = result
 
+        # The write's actual target, not necessarily bound_entity.href. Most
+        # descriptors write to the same resource they're bound to, but a
+        # composite entity -- the AC's ClimateDesc, bound to /mode/vs/0 --
+        # drives writes to several sibling resources via path_segs
+        # (/power/0, /temperature/desired/0, /wind/strength/vs/0, ...) that
+        # write_fn picks per payload (see airconditioner._climate_write).
+        # Applying the optimistic value and settle guard below to
+        # bound_entity.href instead of this target protected the wrong
+        # resource: /mode/vs/0 got the (nonsensical, wrong-shaped) optimistic
+        # merge while the resource the climate entity actually displays from
+        # (e.g. /power/0) never got one, so HA kept showing the pre-write
+        # state until the next real read of that resource -- the 20-60s lag
+        # in issues #17/#53, which survived the earlier optimistic-apply fix
+        # (issue #27) because that fix applied to the wrong href too.
+        write_href = '/' + '/'.join(path_segs)
+
+        # Apply the write optimistically before starting the settle guard,
+        # not after -- mark_write_pending gates every source (poll, sweep,
+        # observe) through the same apply(), itself included, so flipping
+        # this order would have the guard drop the one update it exists to
+        # protect. Without an optimistic value in the cache for it to hold
+        # onto, the settle window was just delaying the real device
+        # confirmation for a few seconds on every write, which read exactly
+        # like the write being silently reverted (issue #27).
+        #
+        # settle_s must outlast the PUT and the async_request_refresh()
+        # below combined, not just DEFAULT_SETTLE_S's fixed few seconds --
+        # that refresh is a full /device/0 summary poll, which
+        # _POLL_TIMEOUT_S itself admits can legitimately take tens of
+        # seconds on these devices (see _poll_once), and some writes settle
+        # on the device itself well after that: issue #9's washer packs
+        # cycle/detergent/softener selection into the same /course/vs/0
+        # options[] array, and picking a new value there visibly needs a
+        # few seconds of internal validation/dispenser movement before the
+        # device's own state agrees -- while /washer/vs/0's temperature/
+        # spin fields (plain flags, no device-side settling) confirm
+        # instantly on the same device. A short fixed window expired while
+        # the confirm poll was still in flight (or before the device had
+        # caught up internally), so that stale read landed unprotected and
+        # reverted the optimistic value, self-correcting again only once a
+        # later poll finally saw the real change -- read by the user as the
+        # write "reverting, then re-applying itself" a few seconds later.
+        #
+        # An earlier attempt at this also released the guard early, right
+        # after the confirming refresh completed, to avoid shutting out
+        # unrelated real updates (another automation, the physical remote)
+        # for the rest of settle_s. That was reverted: releasing the guard
+        # the moment one round trip finishes doesn't mean the device has
+        # actually caught up (exactly the slow-settling case above), and it
+        # introduced its own races around overlapping writes to the same
+        # href. Simpler and safer to just hold the guard for the full,
+        # generously-sized window and let it expire on its own.
+        # write_fn bodies that touch x.com.samsung.da.options carry only the
+        # changed token(s) now (issue #54: confirmed sufficient on the wire --
+        # the device merges by prefix itself), not the whole packed array.
+        # observe.apply()'s field-level {**cached, **rep} merge doesn't know
+        # that -- handed the bare token list, it would replace the cached
+        # field outright and wipe every sibling option for the rest of the
+        # settle window. Pre-merge it here the same way the device does, so
+        # the optimistic cache entry stays complete; the minimal `body` below
+        # is still exactly what goes out over the wire.
+        optimistic_body = body
+        new_options = body.get('x.com.samsung.da.options')
+        if isinstance(new_options, list):
+            cached_options = (self._cache.get(write_href) or {}).get('x.com.samsung.da.options')
+            optimistic_body = {
+                **body,
+                'x.com.samsung.da.options': merge_options_field(cached_options, new_options),
+            }
+        self._observe.apply(write_href, optimistic_body, source='optimistic')
+        self._observe.mark_write_pending(
+            write_href, settle_s=self._POST_TIMEOUT_S + self._POLL_TIMEOUT_S
+        )
+
         def _do_put():
             sess = self._session
             if sess is None:
                 raise RuntimeError("no session")
-            self._observe.mark_write_pending(href)
-            code, _ = sess.post(path_segs, cbor2.dumps(body), timeout=8.0)
-            self._log.info("PUT %s → code %#04x", href, code)
+            code, _ = sess.post(path_segs, cbor2.dumps(body), timeout=self._POST_TIMEOUT_S)
+            self._log.info("PUT %s → code %#04x", write_href, code)
 
         try:
             await self.hass.async_add_executor_job(_do_put)
         except Exception as e:
-            self._log.error("command failed for %s: %s", href, e)
+            self._log.error("command failed for %s: %s", write_href, e)
         else:
             await self.async_request_refresh()
+
+    # ------------------------------------------------------------------
+    # Debug raw write (issue #54): a power-user escape hatch for the
+    # options-flow debug panel, letting a user POST an arbitrary partial
+    # body to an arbitrary href to pin down device-specific write behavior
+    # without waiting on a new release. Deliberately bypasses the
+    # remote-control block and every write_fn/validate_fn above -- that's
+    # the whole point, so use with care.
+    # ------------------------------------------------------------------
+
+    def _raw_write_blocking(self, path_segs: list[str], body: dict, href: str) -> tuple[int, dict]:
+        """Debug primitive: POST an arbitrary patch, then read the href
+        back for ground truth. Blocking -- runs in executor."""
+        if self._session is None:
+            self._connect_session()
+        sess = self._session
+        if sess is None:
+            raise RuntimeError("no session")
+        code, _ = sess.post(path_segs, cbor2.dumps(body), timeout=self._POST_TIMEOUT_S)
+        self._log.warning("DEBUG raw write POST %s %r → code %#04x", href, body, code)
+        new_rep: dict = {}
+        try:
+            sess.pace()
+            rcode, payload = sess.get(path_segs, timeout=10.0)
+            if rcode == 0x45 and payload:
+                rep = cbor2.loads(payload)
+                if isinstance(rep, dict):
+                    self._observe.apply(href, rep, source='poll')
+                    new_rep = rep
+        except Exception as e:
+            self._log.debug("raw write follow-up read failed: %s", e)
+        return code, new_rep
+
+    async def async_raw_write(self, href: str, body: dict) -> tuple[int, dict]:
+        """Debug-only arbitrary write (issue #54). Bypasses the
+        remote-control block and all write_fn/validate_fn logic; sends
+        `body` verbatim as a partial-rep PATCH to `href`. Returns
+        (coap_code, new_rep) where new_rep is the href's value read back
+        right after the write. Used by the options-flow debug panel to
+        help users pin down device-specific write behavior without a new
+        release."""
+        if not isinstance(body, dict) or not body:
+            raise ServiceValidationError(
+                translation_domain=DOMAIN,
+                translation_key="debug_payload_empty",
+            )
+        path_segs = [s for s in href.strip('/').split('/') if s]
+        if not path_segs:
+            raise ServiceValidationError(
+                translation_domain=DOMAIN,
+                translation_key="resource_href_required",
+            )
+        norm_href = '/' + '/'.join(path_segs)
+        async with self._session_lock:
+            code, new_rep = await self.hass.async_add_executor_job(
+                self._raw_write_blocking, path_segs, body, norm_href
+            )
+        # Hasten a full summary poll so entities on other resources catch
+        # up too -- a debug write can affect siblings, not just its href.
+        await self.async_request_refresh()
+        return code, new_rep

custom_components/localthings/entity.py

@@ -8,7 +8,7 @@ from homeassistant.helpers.device_registry import DeviceInfo
 from homeassistant.const import EntityCategory
 
 from .registry.adapter import _key
-from .registry.discovery import BoundEntity
+from .registry.discovery import BoundEntity, _snake_to_title
 
 from .const import DOMAIN
 from .coordinator import LocalThingsCoordinator
@@ -38,13 +38,30 @@ def _is_included(bound: BoundEntity, coordinator: 'LocalThingsCoordinator') -> b
 
 
 def _derive_name(state_key: str) -> str:
-    """Turn a snake_case state key into a title-cased display name.
+    """Turn a snake_case state key into a title-cased label.
 
     Strips a trailing instance number of 0 (singleton), promotes any other
     instance number with a space: "door_cooler_open1" → "Door Cooler Open 1".
+
+    Entity names themselves come from the translation catalog; this only
+    builds the {instance_name} placeholder those translations interpolate,
+    for a device that named its own compartments/ice makers.
     """
     name = re.sub(r'(\d+)$', lambda m: f' {m.group()}' if int(m.group()) > 0 else '', state_key)
-    return name.replace('_', ' ').title().strip()
+    return _snake_to_title(name).strip()
+
+
+def _instance_display_name(bound: BoundEntity, state_key: str) -> str:
+    """Return the stable vendor/href instance label used in a name placeholder."""
+    if bound.instance_name:
+        return bound.instance_name
+    source = bound.key_override or state_key
+    suffix = f"_{bound.desc.key}"
+    if source.endswith(suffix):
+        source = source[:-len(suffix)]
+    elif bound.instance and source.endswith(bound.instance):
+        source = source[:-len(bound.instance)] + bound.instance.replace("_", " ")
+    return _derive_name(source)
 
 
 class LocalThingsEntity(CoordinatorEntity[LocalThingsCoordinator]):
@@ -57,13 +74,48 @@ class LocalThingsEntity(CoordinatorEntity[LocalThingsCoordinator]):
         self._bound = bound
         self._state_key = _key(bound)
         self._attr_unique_id = f"{DOMAIN}_{coordinator.device_serial}_{self._state_key}"
-        self._attr_name = bound.desc.name if bound.desc.name is not None else _derive_name(self._state_key)
-        self._attr_translation_key = bound.desc.translation_key
+        if bound.desc.translation_placeholders is not None:
+            self._attr_translation_placeholders = dict(
+                bound.desc.translation_placeholders
+            )
+        elif bound.desc.use_instance_name:
+            self._attr_translation_placeholders = {
+                "instance_name": _instance_display_name(bound, self._state_key)
+            }
+
+        # _attr_name is deliberately left unset: Home Assistant gives an
+        # explicitly-set name precedence over the translation catalog, so
+        # setting it here would make every entity untranslatable. Every
+        # descriptor resolves to a catalog entry (see translation_key below);
+        # a platform that wants the bare device name instead sets
+        # _attr_name = None itself, as fan.py does for the hood's main entity.
         self._attr_icon = bound.desc.icon
         raw_cat = bound.desc.entity_category
         self._attr_entity_category = EntityCategory(raw_cat) if raw_cat else None
         self._attr_entity_registry_enabled_default = bound.desc.enabled_default
 
+    @property
+    def translation_key(self) -> str | None:
+        """The descriptor's catalog key, defaulting to its own `key`.
+
+        Overrides Entity.translation_key (a property upstream, not a plain
+        attribute) so a callable descriptor -- e.g. laundry.cycle_select's
+        table-id-gated resolver -- is re-evaluated against live coordinator
+        data on every access, not resolved once at construction time.
+
+        Discovery runs on the first /device/0 poll, which the entity
+        registry already documents can hand a sibling resource an empty
+        stub rep before it's actually been fetched (see _is_included's
+        docstring) -- a static one-time resolution here would risk baking
+        in a permanent None (no translation) for the entity's whole
+        lifetime if that stub hadn't populated yet, even once the real
+        value arrives on a later poll.
+        """
+        tk = self._bound.desc.translation_key
+        if callable(tk):
+            return tk(self.coordinator.last_resources)
+        return tk if tk is not None else self._bound.desc.key
+
     @property
     def device_info(self) -> DeviceInfo:
         return self.coordinator.device_info

custom_components/localthings/fan.py

@@ -0,0 +1,122 @@
+"""Fan platform for Samsung range hoods."""
+
+from __future__ import annotations
+
+from homeassistant.components.fan import FanEntity, FanEntityFeature
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.entity_platform import AddEntitiesCallback
+from homeassistant.util.percentage import (
+    ordered_list_item_to_percentage,
+    percentage_to_ordered_list_item,
+)
+
+from .const import DOMAIN
+from .coordinator import LocalThingsCoordinator
+from .entity import LocalThingsEntity, _is_included
+from .registry.entities import FanDesc
+
+
+POWER_HREF = '/power/0'
+POWER_VS_HREF = '/power/vs/0'
+_FAN_SPEED_FIELD = 'x.com.samsung.da.hood.fanSpeed'
+_SUPPORTED_FAN_SPEED_FIELD = 'x.com.samsung.da.hood.supportedFanSpeed'
+
+
+async def async_setup_entry(
+    hass: HomeAssistant,
+    entry: ConfigEntry,
+    async_add_entities: AddEntitiesCallback,
+) -> None:
+    coordinator: LocalThingsCoordinator = hass.data[DOMAIN][entry.entry_id]
+    async_add_entities(
+        LocalThingsRangeHoodFan(coordinator, bound)
+        for bound in coordinator.bound
+        if isinstance(bound.desc, FanDesc) and _is_included(bound, coordinator)
+    )
+
+
+class LocalThingsRangeHoodFan(LocalThingsEntity, FanEntity):
+    """A hood fan combining sibling power and fan-speed resources."""
+
+    _enable_turn_on_off_backwards_compatibility = False
+    _attr_supported_features = (
+        FanEntityFeature.SET_SPEED
+        | FanEntityFeature.TURN_ON
+        | FanEntityFeature.TURN_OFF
+    )
+
+    def __init__(self, coordinator: LocalThingsCoordinator, bound) -> None:
+        super().__init__(coordinator, bound)
+        self._attr_name = None
+
+    def _rep(self, href: str) -> dict:
+        return self.coordinator.resource(href) or {}
+
+    def _all_speed_codes(self) -> list[str]:
+        rep = self._rep(self._bound.href)
+        return [str(value) for value in rep.get(_SUPPORTED_FAN_SPEED_FIELD, ())]
+
+    def _active_speed_codes(self) -> list[str]:
+        # Power is carried by the separate /power resource.  fanSpeed retains
+        # the selected setting while power is off (as the lamp's `current`
+        # field does), so every advertised code is an active ordered speed.
+        return self._all_speed_codes()
+
+    def _power_payload(self, enabled: bool) -> tuple[str, bool, str]:
+        """Target whichever power resource this hood actually exposes."""
+        resources = self.coordinator.last_resources
+        target = POWER_HREF if POWER_HREF in resources else POWER_VS_HREF
+        return 'power', enabled, target
+
+    @property
+    def is_on(self) -> bool:
+        rep = self._rep(POWER_HREF)
+        if 'value' in rep:
+            return bool(rep.get('value'))
+        return str(
+            self._rep(POWER_VS_HREF).get('x.com.samsung.da.power', '')
+        ).lower() == 'on'
+
+    @property
+    def speed_count(self) -> int:
+        return len(self._active_speed_codes())
+
+    @property
+    def percentage(self) -> int | None:
+        if not self.is_on:
+            return 0
+        codes = self._active_speed_codes()
+        current = str(self._rep(self._bound.href).get(_FAN_SPEED_FIELD, ''))
+        if not codes or current not in codes:
+            return None
+        return ordered_list_item_to_percentage(codes, current)
+
+    async def async_turn_on(
+        self, percentage: int | None = None, preset_mode: str | None = None,
+        **kwargs,
+    ) -> None:
+        await self.coordinator.async_send_command(
+            self._bound, self._power_payload(True),
+        )
+        if percentage is not None:
+            await self.async_set_percentage(percentage)
+
+    async def async_turn_off(self, **kwargs) -> None:
+        await self.coordinator.async_send_command(
+            self._bound, self._power_payload(False),
+        )
+
+    async def async_set_percentage(self, percentage: int) -> None:
+        if percentage <= 0:
+            await self.async_turn_off()
+            return
+        codes = self._active_speed_codes()
+        if not codes:
+            return
+        if not self.is_on:
+            await self.coordinator.async_send_command(
+                self._bound, self._power_payload(True),
+            )
+        code = percentage_to_ordered_list_item(codes, percentage)
+        await self.coordinator.async_send_command(self._bound, ('speed', code))

custom_components/localthings/manifest.json

@@ -12,5 +12,5 @@
     "pyOpenSSL>=23.0",
     "smartthings-local>=0.1.0"
   ],
-  "version": "0.8.0"
+  "version": "0.11.1"
 }

custom_components/localthings/number.py

@@ -58,6 +58,9 @@ class LocalThingsNumber(LocalThingsEntity, NumberEntity):
 
     @property
     def native_min_value(self) -> float:
+        desc: NumberDesc = self._bound.desc
+        if desc.native_min_fn is not None:
+            return desc.native_min_fn(self.coordinator.resource(self._bound.href))
         r = self._range_from_resource()
         if r is not None:
             return float(r[0])
@@ -67,6 +70,9 @@ class LocalThingsNumber(LocalThingsEntity, NumberEntity):
 
     @property
     def native_max_value(self) -> float:
+        desc: NumberDesc = self._bound.desc
+        if desc.native_max_fn is not None:
+            return desc.native_max_fn(self.coordinator.resource(self._bound.href))
         r = self._range_from_resource()
         if r is not None:
             return float(r[1])
@@ -74,6 +80,15 @@ class LocalThingsNumber(LocalThingsEntity, NumberEntity):
             return self._attr_native_max_value
         return super().native_max_value
 
+    @property
+    def native_step(self) -> float:
+        desc: NumberDesc = self._bound.desc
+        if desc.step_fn is not None:
+            return desc.step_fn(self.coordinator.resource(self._bound.href))
+        if hasattr(self, '_attr_native_step'):
+            return self._attr_native_step
+        return super().native_step
+
     @property
     def native_value(self):
         return (self.coordinator.data or {}).get(self._state_key)

custom_components/localthings/observe.py

@@ -69,6 +69,7 @@ class ObserveManager:
         self.last_mode_change_wall = time.time()
         self._settle_until: dict[str, float] = {}
         self._settle_lock = threading.Lock()
+        self._cache_lock = threading.Lock()
         self.subscribed_hrefs: set[str] = set()
         self._notified: set[str] = set()
         self._last_notify_ts: float | None = None
@@ -92,11 +93,49 @@ class ObserveManager:
             return True
 
     def apply(self, href: str, rep: dict, source: str) -> bool:
-        """Gate a StateCache.apply_rep call through the write-settle guard."""
-        if self._is_settling(href):
+        """Gate a StateCache.apply_rep call through the write-settle guard.
+
+        Merges the incoming rep onto whatever's already cached for this
+        href rather than handing it to StateCache.apply_rep verbatim --
+        apply_rep does a full replace, and Samsung devices don't always
+        repeat every field on every update (issue #27: a /mode/vs/0
+        OBSERVE notify -- and, on at least one Bespoke fridge, even the
+        /device/0 sweep entry for that href -- can carry just `modes`,
+        omitting `supportedOptions`/`supportedModes` entirely). A full
+        replace would silently wipe fields a select entity's
+        exists_fn/options_field gates on the moment one partial update
+        comes through, even though nothing about the device's actual
+        supported options changed.
+
+        `apply()` is the sole path StateCache mutations flow through in
+        this component (poll, sweep, and OBSERVE notify all funnel here),
+        so `_cache_lock` serializes the read-then-write across those
+        threads (DTLS reader for notifies, executor threads for poll/
+        sweep) -- without it, two concurrent updates for the same href
+        could each read the same prior rep and the second writer would
+        silently lose the first's fields, reintroducing the exact bug
+        this merge fixes.
+
+        `source == 'optimistic'` always bypasses the settle gate below,
+        even while this href is already settling from an earlier write.
+        Several independent selects can share one href -- issue #9's washer
+        packs cycle, detergent, and softener settings onto the same
+        /course/vs/0 -- so a second, different write to the same href
+        while the first's settle window is still open (up to
+        _POST_TIMEOUT_S + _POLL_TIMEOUT_S, tens of seconds -- see
+        coordinator.async_send_command) is an expected, normal sequence,
+        not a stale echo of the first write. Gating it the same as a
+        poll/sweep/observe update would silently drop the user's own
+        second selection from the cache until the first write's guard
+        happened to expire, i.e. the exact symptom this guard exists to
+        prevent, just relocated to whichever write loses the race.
+        """
+        if source != 'optimistic' and self._is_settling(href):
             self.log.debug("dropping %s update for %s (settling)", source, href)
             return False
-        return self.cache.apply_rep(href, rep, source=source)
+        with self._cache_lock:
+            merged = {**(self.cache.get(href) or {}), **rep}
+            return self.cache.apply_rep(href, merged, source=source)
 
     def on_notification(self, href: str, payload: bytes) -> None:
         """Wired as DtlsCoapSession.on_notification. Runs on the DTLS

custom_components/localthings/registry/by_type/__init__.py

@@ -2,17 +2,29 @@
 from typing import Optional
 
 from ._base import DeviceRegistry
-from . import airconditioner, dishwasher, dryer, oven, refrigerator, washer
+from . import (
+    air_purifier, airconditioner, cooktop, dishwasher, dryer, oven,
+    range as _range, range_hood, refrigerator, washer,
+)
 
-__all__ = ['DeviceRegistry', '_type_key', 'for_device', 'for_device_by_model']
+__all__ = [
+    'DeviceRegistry', '_type_key', 'for_device', 'for_device_by_model',
+    'for_device_by_resources',
+]
 
 
 _REGISTRY_BY_KEY: dict[str, DeviceRegistry] = {
+    'air_purifier': air_purifier.REGISTRY,
+    'airpurifier': air_purifier.REGISTRY,
     'airconditioner': airconditioner.REGISTRY,
     'air_conditioner': airconditioner.REGISTRY,
+    'cooktop': cooktop.REGISTRY,
     'dishwasher': dishwasher.REGISTRY,
     'dryer': dryer.REGISTRY,
     'oven': oven.REGISTRY,
+    'hood': range_hood.REGISTRY,
+    'range': _range.REGISTRY,
+    'range_hood': range_hood.REGISTRY,
     'refrigerator': refrigerator.REGISTRY,
     'washer': washer.REGISTRY,
 }
@@ -96,4 +108,66 @@ def for_device_by_model(model_num: str, description: str) -> Optional[DeviceRegi
     # a modelNum carrying the '_PRAC_' (Package Room Air Conditioner) token.
     if key is None and '_PRAC_' in (model_num or ''):
         key = 'airconditioner'
+    # Older/simpler RAC boards (e.g. TP2X_RAC_20K, issue #37) use the plain
+    # '_RAC_' token instead -- distinct from '_PRAC_' above (no overlap: the
+    # 'P' sits between the underscore and 'RAC' in that token).
+    if key is None and '_RAC_' in (model_num or ''):
+        key = 'airconditioner'
+    # System air conditioners (multi-indoor-unit commercial installs, e.g.
+    # A-CAWW-TP2-20-COMMON, issue #52) report no oneUiVersion either and
+    # carry the '-CAWW-' board-family token instead of '_RAC_'/'_PRAC_'.
+    # Same TP1X/TP2X-class resource surface as the room-AC models above
+    # (confirmed by the issue #52 dump binding cleanly against the existing
+    # airconditioner registry once routed here), plus one new SAC-specific
+    # resource (see airconditioner.py's _AC_IGNORED).
+    if key is None and '-CAWW-' in (model_num or '').upper():
+        key = 'airconditioner'
+    # Air purifiers (e.g. ARTIK051_TVTL_18K, issue #56) report no
+    # oneUiVersion either, and carry the '_TVTL_' board-family token.
+    if key is None and '_TVTL_' in (model_num or ''):
+        key = 'air_purifier'
+    model_identity = f'{model_num} {description}'.upper()
+    if key is None and ('_COOKTOP' in model_identity or '_GB_CT_' in model_identity):
+        key = 'cooktop'
+    if key is None and model_identity.startswith('AHD-'):
+        key = 'range_hood'
+    # Range/cooktop-oven combos (e.g. TP1X_DA-KS-RANGE-0102X, issue #44) --
+    # like the RAC/PRAC air conditioners above, these report no oneUiVersion
+    # and don't match the washer/dryer/dishwasher consumer-prefix map either.
+    if key is None and '-RANGE-' in (model_num or '').upper():
+        key = 'range'
+    # Wall ovens (e.g. TP1X_DA-KS-OVEN-0107X, issue #55) -- same board-family
+    # naming as the range combo above, minus the burners; also reports no
+    # oneUiVersion and doesn't match the washer/dryer/dishwasher prefix map.
+    if key is None and '-OVEN-' in (model_num or '').upper():
+        key = 'oven'
     return _REGISTRY_BY_KEY.get(key) if key else None
+
+
+def for_device_by_resources(resources: dict[str, dict]) -> Optional[DeviceRegistry]:
+    """Detect a device family from a distinctive local-resource signature.
+
+    Some newer cooktops omit both ``oneUiVersion`` and
+    ``/information/vs/0``.  Their mode resource still identifies them: it
+    contains a DeviceType option and multiple per-burner OperationState
+    options.  Require both shapes so an oven's unrelated ``/mode/vs/0`` is
+    not misclassified.
+    """
+    mode = resources.get('/mode/vs/0', {})
+    options = mode.get('x.com.samsung.da.options') or ()
+    has_device_type = any(
+        isinstance(option, str) and option.startswith('DeviceType_')
+        for option in options
+    )
+    operation_states = sum(
+        1 for option in options
+        if isinstance(option, str) and option.startswith('OperationState')
+    )
+    if has_device_type and operation_states >= 2:
+        return _REGISTRY_BY_KEY['cooktop']
+    if (
+        '/hood/fanspeed/vs/0' in resources
+        and '/hood/lamp/vs/0' in resources
+    ):
+        return _REGISTRY_BY_KEY['range_hood']
+    return None

custom_components/localthings/registry/by_type/air_purifier.py

@@ -0,0 +1,25 @@
+"""Air-purifier device registry (Samsung ARTIK051_TVTL-class, issue #56).
+
+Reports no oneUiVersion; resolved via for_device_by_model's '_TVTL_' modelNum
+token (see registry.py). Reuses dishwasher.DIAGNOSIS for /diagnosis/vs/0
+(identical field/write contract).
+"""
+from ..capabilities import air_purifier, common, dishwasher, ignored
+from ._base import DeviceRegistry, _build
+
+REGISTRY = DeviceRegistry(
+    name='air_purifier',
+    capabilities=_build([
+        *ignored.IGNORED,
+        *common.UNIVERSAL,
+        *common.POWER,
+        dishwasher.DIAGNOSIS,
+        air_purifier.AIR_QUALITY,
+        air_purifier.FILTER,
+        air_purifier.DEVICE_ACTIVE,
+        air_purifier.AIRFLOW_GENERIC,
+        air_purifier.AIRFLOW_VS_FALLBACK,
+        air_purifier.MODE,
+        *air_purifier.COVERAGE,
+    ]),
+)

custom_components/localthings/registry/by_type/airconditioner.py

@@ -3,27 +3,28 @@
 The first device whose core controls surface as a single composite HA `climate`
 entity (see capabilities/airconditioner.py and climate.py). Power/mode/temp/wind
 are consumed by that entity rather than exposed as separate switches/selects, so
-this registry deliberately does NOT include the common POWER caps -- on/off is
-the climate entity's HVACMode.OFF / TURN_ON/OFF.
+this registry includes *common.UNIVERSAL but deliberately NOT common.POWER --
+on/off is the climate entity's HVACMode.OFF / TURN_ON/OFF. See common.POWER's
+own comment in capabilities/common.py for why it's excluded.
 
-Reuses common.ALARMS + common.ENERGY_METER, fridge.FIRMWARE_UPDATE (as every
-registry does), and dishwasher.DIAGNOSIS for /diagnosis/vs/0.
+Reuses dishwasher.DIAGNOSIS for /diagnosis/vs/0.
 """
-from ..capabilities import airconditioner, common, dishwasher, fridge, ignored
+from ..capabilities import airconditioner, common, dishwasher, ignored
 from ._base import DeviceRegistry, _build
 
 REGISTRY = DeviceRegistry(
     name='airconditioner',
     capabilities=_build([
         *ignored.IGNORED,
-        common.ALARMS,
-        common.ENERGY_METER,
-        fridge.FIRMWARE_UPDATE,
+        *common.UNIVERSAL,
         dishwasher.DIAGNOSIS,
         airconditioner.CLIMATE,
         airconditioner.AIR_PURIFY,
         airconditioner.AUTO_CLEAN,
         airconditioner.AIR_FILTER,
+        airconditioner.DISPLAY_LIGHT,
+        airconditioner.MUTE_ONCE,
+        airconditioner.CURRENT_LIMIT,
         *airconditioner.COVERAGE,
     ]),
 )

custom_components/localthings/registry/by_type/cooktop.py

@@ -0,0 +1,17 @@
+"""Cooktop device registry."""
+
+from ..capabilities import common, cooktop, ignored
+from ._base import DeviceRegistry, _build
+
+
+REGISTRY = DeviceRegistry(
+    name='cooktop',
+    capabilities=_build([
+        *ignored.IGNORED,
+        cooktop.COOKTOP_POWER,
+        cooktop.COOKTOP_MODE,
+        cooktop.COOKTOP_CONNECTED,
+        cooktop.PAIRED_HOOD_STATUS,
+        common.FIRMWARE_UPDATE,
+    ]),
+)

custom_components/localthings/registry/by_type/dishwasher.py

@@ -1,19 +1,13 @@
 """Dishwasher device registry."""
-from ..capabilities import common, dishwasher, fridge, ignored, laundry, operational
+from ..capabilities import common, dishwasher, ignored, laundry, operational
 from ._base import DeviceRegistry, _build
 
 REGISTRY = DeviceRegistry(
     name='dishwasher',
     capabilities=_build([
         *ignored.IGNORED,
-        common.POWER_GENERIC,
-        common.POWER_VS_FALLBACK,
-        common.KIDS_LOCK_GENERIC,
-        common.KIDS_LOCK_VS_FALLBACK,
-        common.REMOTE_CONTROL_GENERIC,
-        common.REMOTE_CONTROL_VS_FALLBACK,
-        common.ALARMS,
-        common.ENERGY_METER,
+        *common.UNIVERSAL,
+        *common.POWER,
         common.WATER_METER,
         common.WATER_FILTER,
         operational.OPERATIONAL_STATE,
@@ -25,6 +19,5 @@ REGISTRY = DeviceRegistry(
         laundry.DOOR_LED,
         laundry.SOUND_MODE,
         laundry.SOUND_VOLUME,
-        fridge.FIRMWARE_UPDATE,
     ]),
 )

custom_components/localthings/registry/by_type/dryer.py

@@ -9,21 +9,15 @@ objects the washer registry uses -- washer and dryer expose the same
 DA_WM_-family surface, so they stay consistent instead of each carrying a
 bespoke variant.
 """
-from ..capabilities import common, dryer, fridge, ignored, laundry, operational
+from ..capabilities import common, dryer, ignored, laundry, operational
 from ._base import DeviceRegistry, _build
 
 REGISTRY = DeviceRegistry(
     name='dryer',
     capabilities=_build([
         *ignored.IGNORED,
-        common.POWER_GENERIC,
-        common.POWER_VS_FALLBACK,
-        common.KIDS_LOCK_GENERIC,
-        common.KIDS_LOCK_VS_FALLBACK,
-        common.REMOTE_CONTROL_GENERIC,
-        common.REMOTE_CONTROL_VS_FALLBACK,
-        common.ALARMS,
-        common.ENERGY_METER,
+        *common.UNIVERSAL,
+        *common.POWER,
         operational.OPERATIONAL_STATE,
         laundry.DOOR_LED,
         laundry.SOUND_MODE,
@@ -32,6 +26,5 @@ REGISTRY = DeviceRegistry(
         dryer.DRYER_SETTINGS,
         dryer.DRYER_COURSE,
         dryer.DRYER_DIAGNOSIS,
-        fridge.FIRMWARE_UPDATE,
     ]),
 )

custom_components/localthings/registry/by_type/oven.py

@@ -1,24 +1,19 @@
 """Oven device registry."""
-from ..capabilities import common, fridge, ignored, oven
+from ..capabilities import common, ignored, oven
 from ._base import DeviceRegistry, _build
 
 REGISTRY = DeviceRegistry(
     name='oven',
     capabilities=_build([
         *ignored.IGNORED,
-        common.POWER_GENERIC,
-        common.POWER_VS_FALLBACK,
-        common.KIDS_LOCK_GENERIC,
-        common.KIDS_LOCK_VS_FALLBACK,
-        common.REMOTE_CONTROL_GENERIC,
-        common.REMOTE_CONTROL_VS_FALLBACK,
-        common.ALARMS,
+        *common.UNIVERSAL,
+        *common.POWER,
         oven.OVEN_CAVITY,
         oven.OVEN_SETPOINT,
         oven.OVEN_MODE,
         oven.OVEN_OPERATIONAL_STATE,
         oven.OVEN_DOOR,
         oven.OVEN_CONNECTED,
-        fridge.FIRMWARE_UPDATE,
+        oven.OVEN_SPEC,
     ]),
 )

custom_components/localthings/registry/by_type/range.py

@@ -0,0 +1,29 @@
+"""Range (oven + cooktop combo) device registry — issue #44.
+
+Reuses the oven family's cavity/setpoint/mode/operational-state/door/
+connected capabilities wholesale (a range's oven half is the same OCF
+surface as a standalone oven) and adds the cooktop-specific capabilities
+for the burner half.
+"""
+from ..capabilities import common, ignored, oven
+from ..capabilities import range as range_caps
+from ._base import DeviceRegistry, _build
+
+REGISTRY = DeviceRegistry(
+    name='range',
+    capabilities=_build([
+        *ignored.IGNORED,
+        *common.UNIVERSAL,
+        *common.POWER,
+        oven.OVEN_CAVITY,
+        oven.OVEN_SETPOINT,
+        oven.OVEN_MODE,
+        oven.OVEN_OPERATIONAL_STATE,
+        oven.OVEN_DOOR,
+        oven.OVEN_CONNECTED,
+        oven.OVEN_SPEC,
+        range_caps.COOKTOP_STATUS,
+        range_caps.COOKTOP_SPEC,
+        range_caps.COOKTOP_SAFETY,
+    ]),
+)

custom_components/localthings/registry/by_type/range_hood.py

@@ -0,0 +1,22 @@
+"""Range-hood device registry."""
+
+from ..capabilities import common, ignored, range_hood
+from ._base import DeviceRegistry, _build
+
+
+REGISTRY = DeviceRegistry(
+    name='range_hood',
+    capabilities=_build([
+        *ignored.IGNORED,
+        range_hood.HOOD_ALARMS,
+        common.ENERGY_METER,
+        common.FIRMWARE_UPDATE,
+        range_hood.HOOD_FAN,
+        range_hood.HOOD_LAMP,
+        range_hood.HOOD_FILTER,
+        range_hood.AIR_QUALITY,
+        range_hood.AIR_LEVEL_CHECK,
+        range_hood.AUTO_VENTILATION,
+        *range_hood.COVERAGE,
+    ]),
+)

custom_components/localthings/registry/by_type/refrigerator.py

@@ -6,16 +6,10 @@ REGISTRY = DeviceRegistry(
     name='refrigerator',
     capabilities=_build([
         *ignored.IGNORED,
-        common.POWER_GENERIC,
-        common.POWER_VS_FALLBACK,
+        *common.UNIVERSAL,
+        *common.POWER,
         fridge.STATUS_LOCK,
         fridge.DOOR_ALERT,
-        common.KIDS_LOCK_GENERIC,
-        common.KIDS_LOCK_VS_FALLBACK,
-        common.REMOTE_CONTROL_GENERIC,
-        common.REMOTE_CONTROL_VS_FALLBACK,
-        common.ALARMS,
-        common.ENERGY_METER,
         common.WATER_FILTER,
         dishwasher.DIAGNOSIS,
         fridge.ICEMAKER_NIGHTTIME,
@@ -28,11 +22,9 @@ REGISTRY = DeviceRegistry(
         fridge.SABBATH,
         fridge.BEVERAGE_ZONE,
         fridge.PANTRY_ZONE,
-        fridge.FIRMWARE_UPDATE,
         fridge.DEFROST_DELAY,
         fridge.DEFROST_DELAY_NATIVE_DUPLICATE,
         fridge.DEFROST_BLOCK_STATUS,
-        fridge.SELF_CHECK,
         fridge.DOORS_FALLBACK,
         fridge.TEMPERATURES_FALLBACK,
         fridge.ICEMAKER_STATUS_FALLBACK,

custom_components/localthings/registry/by_type/washer.py

@@ -1,26 +1,19 @@
 """Washer device registry."""
-from ..capabilities import common, dishwasher, fridge, ignored, laundry, operational, washer
+from ..capabilities import common, dishwasher, ignored, laundry, operational, washer
 from ._base import DeviceRegistry, _build
 
 REGISTRY = DeviceRegistry(
     name='washer',
     capabilities=_build([
         *ignored.IGNORED,
-        common.POWER_GENERIC,
-        common.POWER_VS_FALLBACK,
-        common.KIDS_LOCK_GENERIC,
-        common.KIDS_LOCK_VS_FALLBACK,
-        common.REMOTE_CONTROL_GENERIC,
-        common.REMOTE_CONTROL_VS_FALLBACK,
+        *common.UNIVERSAL,
+        *common.POWER,
         washer.WASHER_SETTINGS,
         washer.WASHER_COURSE,
         laundry.BUZZER_SOUND,
         laundry.JOB_BEGINNING_STATUS,
-        common.ALARMS,
-        common.ENERGY_METER,
         common.WATER_METER,
         operational.OPERATIONAL_STATE,
         dishwasher.DIAGNOSIS,
-        fridge.FIRMWARE_UPDATE,
     ]),
 )

custom_components/localthings/registry/capabilities/__init__.py

@@ -1,4 +1,7 @@
-from . import common, dishwasher, fridge, ignored, laundry, operational, oven
+from . import (
+    common, cooktop, dishwasher, fridge, ignored, laundry, operational, oven,
+    range_hood,
+)
 from ..capability import Capability
 
 

custom_components/localthings/registry/capabilities/air_purifier.py

@@ -0,0 +1,174 @@
+"""Capabilities for the Samsung ARTIK051_TVTL-class air purifier family
+(model AX60R5080WD/SE, issue #56).
+
+Power, kids-lock, remote-control, alarms, and the energy meter are the shared
+common.py capabilities (this family exposes the standard /power/0+/power/vs/0
+pair and /alarms/vs/0, /energy/consumption/vs/0). /diagnosis/vs/0 reuses
+dishwasher.DIAGNOSIS -- identical field/write contract
+(x.com.samsung.da.diagnosisStart, 'Ready' on both dumps).
+
+/mode/vs/0's x.com.samsung.da.options array packs multiple independent
+'<Prefix>_<value>' flags into one list -- the same packed-list contract
+laundry.py's option_value/option_write already model for /course/vs/0's
+options[] (reused directly below, just against this family's own href). Per
+issue #56's follow-up (five diagnostics dumps captured with the physical unit
+set to Auto/Sleep/Low/Medium/High):
+  Light_On / Light_Off  -- a plain on/off flag; MODE below models it as a
+                            real switch, RMW-replacing just that one entry.
+  Comode_Off            -- read 'Off' on *every* one of the five dumps,
+                            including High/Low/Medium/Auto -- confirms this
+                            is NOT the fan-speed selector (ruling out the
+                            original guess); exposed read-only since its
+                            actual purpose is still unconfirmed.
+  OptionCode_60282       -- confirmed opaque/not user-facing in the
+                            SmartThings app; not modeled (same treatment as
+                            range_hood's OptionCode_* token on the same
+                            href).
+  Blooming_*             -- confirmed to have no corresponding SmartThings
+                            app setting; dropped entirely rather than kept
+                            as an unexplained diagnostic (it did track 1:1
+                            with Sleep mode across the five dumps -- 0 in
+                            Sleep, 6 otherwise -- so it's plausibly an
+                            automatic side effect of sleep mode, e.g. a
+                            display-dimming level, but that's still a guess).
+
+/airflow/0 and /airflow/vs/0's `speed` still isn't modeled as a real
+fan-speed control: across the same five dumps it read 0 for both Auto *and*
+High, and 3 for Low/Medium *and* Sleep -- not a monotonic mapping to any
+selectable level, and the dumps were all captured within about three minutes
+of each other (only one poll cycle apart at this integration's 30s summary
+interval), so the values may not have settled after each change before the
+diagnostics snapshot was taken. Exposed read-only pending a confirmed,
+stable capture -- see the issue #56 discussion for what's needed.
+"""
+from ..capability import Capability
+from ..entities import BinarySensorDesc, SensorDesc, SwitchDesc
+from .common import int_or_none, sensor_item_value
+from .laundry import bool_option_exists, bool_option_value, option_value, option_write
+
+_AIR_QUALITY_SENSORS = (
+    ('dust', 'mdi:blur', 'Dust'),
+    ('fine_dust', 'mdi:blur', 'FineDust'),
+    ('super_fine_dust', 'mdi:blur', 'SuperFineDust'),
+    ('odor', 'mdi:scent', 'Odor'),
+    ('clean_level', 'mdi:air-filter', 'CleanLevel'),
+)
+
+AIR_QUALITY = Capability(
+    href='/sensors/vs/0',
+    poll_tier='warm',
+    entities=tuple(
+        SensorDesc(key=key, field='x.com.samsung.da.items', icon=icon,
+                   value_fn=lambda items, t=sensor_type: sensor_item_value(items, t))
+        for key, icon, sensor_type in _AIR_QUALITY_SENSORS
+    ),
+)
+
+
+def _consumable_state(items, name):
+    """Read a `/consumable/vs/0`-style items[] entry -- {name, state} pairs,
+    unlike AIR_QUALITY's {type, value} shape above."""
+    for item in items or ():
+        if isinstance(item, dict) and item.get('x.com.samsung.da.name') == name:
+            return item.get('x.com.samsung.da.state')
+    return None
+
+
+# FilterProgress is a 0-100 percentage counting up as the filter wears --
+# confirmed via issue #56: the SmartThings app shows "Filter needs changing"
+# once this reaches 100, so 100 means fully used, not "brand new." Named
+# after the raw field (matching the AC/range_hood filterUsage convention,
+# which counts the same direction) rather than "filter life," which would
+# imply the opposite direction.
+FILTER = Capability(
+    href='/consumable/vs/0',
+    poll_tier='cold',
+    entities=(
+        SensorDesc(key='filter_progress', field='x.com.samsung.da.items',
+                   unit='%', state_class='measurement',
+                   icon='mdi:air-filter', entity_category='diagnostic',
+                   value_fn=lambda items: int_or_none(
+                       _consumable_state(items, 'FilterProgress'))),
+    ),
+)
+
+DEVICE_ACTIVE = Capability(
+    href='/devicespecificinfo/vs/0',
+    poll_tier='cold',
+    entities=(
+        BinarySensorDesc(key='device_active', field='x.com.samsung.da.deviceActive',
+                          icon='mdi:check-network-outline',
+                          entity_category='diagnostic',
+                          value_fn=lambda v: bool(v)),
+    ),
+)
+
+# OCF-native / vendor pair for fan speed+direction -- see module docstring for
+# why these are read-only for now.
+AIRFLOW_GENERIC = Capability(
+    href='/airflow/0',
+    poll_tier='warm',
+    entities=(
+        SensorDesc(key='fan_speed_level', field='speed',
+                   icon='mdi:fan',
+                   state_class='measurement', entity_category='diagnostic'),
+        SensorDesc(key='fan_direction', field='direction',
+                   icon='mdi:rotate-3d-variant',
+                   entity_category='diagnostic'),
+    ),
+)
+
+AIRFLOW_VS_FALLBACK = Capability(
+    href='/airflow/vs/0',
+    match_fn=lambda rep, resources: '/airflow/0' not in resources,
+    poll_tier='warm',
+    entities=(
+        SensorDesc(key='fan_speed_level', field='x.com.samsung.da.speedLevel',
+                   icon='mdi:fan',
+                   state_class='measurement', entity_category='diagnostic',
+                   value_fn=int_or_none),
+        SensorDesc(key='fan_direction', field='x.com.samsung.da.direction',
+                   icon='mdi:rotate-3d-variant',
+                   entity_category='diagnostic'),
+    ),
+)
+
+
+def _light_write(payload, rep, href=None):
+    # option_write's single-token write is confirmed on a washer's
+    # /course/vs/0 (issue #54), NOT independently on this family's
+    # /mode/vs/0 -- extrapolated on the assumption the same vendor field
+    # merges the same way everywhere. If some unit replaces the field
+    # outright instead, this would drop Comode/OptionCode alongside it on
+    # the next light toggle; revisit if a real device report surfaces that.
+    return ['mode', 'vs', '0'], {
+        'x.com.samsung.da.options': option_write('Light', payload),
+    }
+
+
+MODE = Capability(
+    href='/mode/vs/0',
+    poll_tier='warm',
+    entities=(
+        SwitchDesc(key='display_light', icon='mdi:led-on',
+                   entity_category='config',
+                   rep_fn=bool_option_value('Light'),
+                   exists_fn=bool_option_exists('Light'),
+                   write_fn=_light_write),
+        # Read-only -- confirmed NOT the fan-speed selector (see module
+        # docstring), actual purpose still unconfirmed.
+        SensorDesc(key='operating_mode', icon='mdi:fan',
+                   entity_category='diagnostic',
+                   rep_fn=lambda rep: option_value(rep.get('x.com.samsung.da.options'), 'Comode'),
+                   exists_fn=bool_option_exists('Comode')),
+    ),
+)
+
+# /humidity/0 and /humidity/vs/0 are empty {} on both dumps this family has
+# been verified against -- covered here (not globally, per ignored.py's
+# module docstring) since those hrefs collide with fridge/AC schemas
+# elsewhere. Same two hrefs and reasoning as airconditioner.py's _AC_IGNORED.
+COVERAGE = [
+    Capability(href='/humidity/0'),
+    Capability(href='/humidity/vs/0'),
+]

custom_components/localthings/registry/capabilities/airconditioner.py

@@ -15,7 +15,7 @@ different schema (see capabilities/__init__.py). They live only in the AC
 by_type registry.
 """
 from ..capability import Capability
-from ..entities import ClimateDesc, SensorDesc, SwitchDesc
+from ..entities import BinarySensorDesc, ClimateDesc, SensorDesc, SwitchDesc
 
 # ---------------------------------------------------------------------------
 # Canonical AC resource hrefs. The climate entity (climate.py) binds the
@@ -34,10 +34,12 @@ HREF_TEMP_CONTROL = '/temperature/control/vs/0'   # target_temperature_step
 HREF_WIND_STRENGTH = '/wind/strength/vs/0'        # fan_mode
 HREF_WIND_DIRECTION = '/wind/direction/vs/0'      # swing_mode
 HREF_CONVENIENT = '/mode/convenient/vs/0'         # preset_mode
+HREF_TEMPS_VS = '/temperatures/vs/0'              # vendor temp fallback (items[] array)
 
 CLIMATE_CONSUMED_HREFS = [
     HREF_POWER, HREF_POWER_VS, HREF_TEMP_CURRENT, HREF_TEMP_DESIRED,
-    HREF_TEMP_CONTROL, HREF_WIND_STRENGTH, HREF_WIND_DIRECTION, HREF_CONVENIENT,
+    HREF_TEMP_CONTROL, HREF_TEMPS_VS, HREF_WIND_STRENGTH, HREF_WIND_DIRECTION,
+    HREF_CONVENIENT,
 ]
 
 
@@ -107,7 +109,7 @@ AIR_PURIFY = Capability(
     poll_tier='warm',
     entities=(
         SwitchDesc(key='air_purify', field='x.com.samsung.da.modes',
-                   name='Air purification', icon='mdi:air-purifier',
+                   icon='mdi:air-purifier',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=lambda p, rep, href=None: (
@@ -121,7 +123,7 @@ AUTO_CLEAN = Capability(
     poll_tier='cold',
     entities=(
         SwitchDesc(key='auto_clean', field='x.com.samsung.da.settingStatus',
-                   name='Auto clean', icon='mdi:spray-bottle',
+                   icon='mdi:spray-bottle',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=lambda p, rep, href=None: (
@@ -135,17 +137,68 @@ AIR_FILTER = Capability(
     poll_tier='cold',
     entities=(
         SensorDesc(key='air_filter_usage', rep_fn=_filter_usage_percent,
-                   name='Filter usage', unit='%', state_class='measurement',
+                   unit='%', state_class='measurement',
                    icon='mdi:air-filter', entity_category='diagnostic'),
         SensorDesc(key='air_filter_status', field='x.com.samsung.da.filterStatus',
-                   name='Filter status', device_class='enum',
+                   device_class='enum',
                    options=('normal', 'wash', 'replace'),
-                   translation_key='air_filter_status',
+                   translation_key='filter_status',
                    icon='mdi:air-filter', entity_category='diagnostic',
                    value_fn=lambda v: v.lower() if isinstance(v, str) else v),
     ),
 )
 
+DISPLAY_LIGHT = Capability(
+    href='/light/vs/0',
+    poll_tier='cold',
+    entities=(
+        SwitchDesc(key='display_light', field='mode',
+                   icon='mdi:led-on',
+                   entity_category='config',
+                   value_fn=lambda v: v == 'On',
+                   write_fn=lambda p, rep, href=None: (
+                       ['light', 'vs', '0'],
+                       {'mode': 'On' if p == 'On' else 'Off'})),
+    ),
+)
+
+# Confirmed against issue #38's dump (TP1X_DA-AC-RAC-01001_0000): a single
+# boolean field, no vendor prefix, mirroring the On/Off convention used
+# throughout the rest of this API.
+MUTE_ONCE = Capability(
+    href='/option/muteonce/vs/0',
+    poll_tier='warm',
+    entities=(
+        SwitchDesc(key='mute_once', field='muteonce',
+                   icon='mdi:volume-mute',
+                   entity_category='config',
+                   value_fn=lambda v: v == 'On',
+                   write_fn=lambda p, rep, href=None: (
+                       ['option', 'muteonce', 'vs', '0'],
+                       {'muteonce': 'On' if p == 'On' else 'Off'})),
+    ),
+)
+
+# Circuit-breaker current-limit setting (issue #38, TP1X board): `operation`
+# toggles the limiter and `modes` picks a level out of `supportedModes`
+# (seen as '3'..'9'). No vendor field-name prefix and no unit/label in the
+# dump to confirm what the levels mean (amps vs. an abstract tier) --
+# exposed read-only per the 'don't guess' rule rather than risking an
+# unverified write to live HVAC hardware.
+CURRENT_LIMIT = Capability(
+    href='/electriccurrent/vs/0',
+    poll_tier='cold',
+    entities=(
+        BinarySensorDesc(key='current_limit_enabled', field='operation',
+                          icon='mdi:current-ac',
+                          entity_category='diagnostic',
+                          value_fn=lambda v: v == 'On'),
+        SensorDesc(key='current_limit_level', field='modes',
+                   icon='mdi:current-ac',
+                   entity_category='diagnostic'),
+    ),
+)
+
 # ---------------------------------------------------------------------------
 # AC-scoped coverage: the CLIMATE_CONSUMED_HREFS above (read by the climate
 # entity) plus vendor duplicates / all-zero-ambiguous / plumbing resources.
@@ -153,10 +206,18 @@ AIR_FILTER = Capability(
 # (/mode/vs/0 handled above, /temperatures/vs/0, /humidity/*) collide with
 # other families' schemas. A no-entity Capability still marks the href as
 # bound so discover() reports no coverage gap.
+#
+# CLIMATE_CONSUMED_HREFS carry the climate card's actual displayed state
+# (power, current/target temp, fan, swing, preset) -- the coordinator only
+# OBSERVE-subscribes and sub-polls 'hot'/'warm' hrefs (see coordinator.py),
+# so leaving these at the Capability default of 'cold' meant every state
+# change was invisible until the next full /device/0 summary sweep
+# (~30s -- issue #17: instant device response, 20-30s HA lag). Pin them to
+# 'warm' -- same tier as CLIMATE's own primary href -- so they get push
+# notifications (or, in poll-only mode, the warm sub-poll cadence) instead
+# of waiting on the summary sweep.
 # ---------------------------------------------------------------------------
 _AC_IGNORED = [
-    # Vendor superset that duplicates the OCF /temperature/current+desired pair.
-    '/temperatures/vs/0',
     # All-zero and ambiguously encoded on this model (2-value arrays); the
     # 'don't guess' rule -- leave unmodeled rather than invent entities.
     '/sensors/vs/0',
@@ -164,7 +225,34 @@ _AC_IGNORED = [
     '/humidity/vs/0',
     # Presence-personalization plumbing (empty item list here).
     '/personality/presence/vs/0',
+    # --- TP1X/TP2X-class housekeeping / opaque blobs. These carry no
+    # user-actionable state or no documented write contract, so per the
+    # 'don't guess' rule they are ignored rather than modeled.
+    # /option/muteonce/vs/0 and /selfcheck/vs/0 are deliberately NOT here --
+    # see MUTE_ONCE above and common.SELF_CHECK (via common.UNIVERSAL) in
+    # the by_type registry, both of which have a confirmed, cleanly
+    # modelable contract.
+    '/airlevelcheck/vs/0',         # periodic air-quality sensing scheduler plumbing
+    '/aisleep/vs/0',               # AI-sleep feedback state (no actionable control)
+    '/availablecontrolsets/vs/0',  # opaque hex-encoded control-set bitmap
+    '/da/softreset/vs/0',          # soft-reset trigger plumbing
+    '/keepnormalstate/vs/0',       # internal keep-normal flag
+    '/mds/absencemonitoring/vs/0', # motion-detection sensor plumbing (empty here)
+    '/mds/absencestate/vs/0',      # motion-detection state (empty here)
+    '/remotedatacontrol/vs/0',     # remote data-control session status
+    '/remotetemperature/vs/0',     # external temp-sensor feed (unset on this unit)
+    '/reserverulesets/vs/0',       # opaque hex-encoded schedule reservation blob
+    '/welcome/temperature/vs/0',   # welcome-cooling plumbing
+    # System-AC-only (multi-indoor-unit commercial installs, e.g.
+    # A-CAWW-TP2-20-COMMON, issue #52): opaque hex-encoded installation
+    # topology -- indoor/outdoor unit pairing, per-unit serials, MCU info.
+    # Commissioning-time plumbing, not user-actionable appliance state.
+    '/sac/installationinfo/vs/0',
 ]
 
 # Built as bare no-entity caps; folded into the AC registry (not global).
-COVERAGE = [Capability(href=h) for h in (CLIMATE_CONSUMED_HREFS + _AC_IGNORED)]
+COVERAGE = [
+    Capability(href=h, poll_tier='warm') for h in CLIMATE_CONSUMED_HREFS
+] + [
+    Capability(href=h) for h in _AC_IGNORED
+]

custom_components/localthings/registry/capabilities/common.py

@@ -11,7 +11,9 @@ against live device dumps:
   /filter/waterfilter/vs/0  -> x.com.samsung.da.filterUsage / filterStatus
 """
 from ..capability import Capability
-from ..entities import BinarySensorDesc, SensorDesc, SwitchDesc
+from ..entities import (
+    BinarySensorDesc, ButtonDesc, SelectDesc, SensorDesc, SwitchDesc,
+)
 
 
 def _num(v):
@@ -21,6 +23,13 @@ def _num(v):
         return None
 
 
+def int_or_none(v):
+    try:
+        return int(v)
+    except (TypeError, ValueError):
+        return None
+
+
 def clamp_power(v):
     n = _num(v)
     return 0.0 if (n is not None and n < 0) else n
@@ -56,6 +65,53 @@ def _active_alarm_codes(items):
     return ', '.join(codes) if codes else 'none'
 
 
+def merge_options_field(cached, new_tokens):
+    """Merge freshly-written `<Prefix>_<Value>` tokens into a cached
+    x.com.samsung.da.options[]-style array the same way the device itself
+    merges them: match by prefix, replace if present, append if not.
+
+    Confirmed on real hardware (issue #54) that a write only needs to carry
+    the changed token(s), not the whole array -- see laundry.option_write /
+    oven._option_write for the write side. This is the read side of that
+    same fact: coordinator.async_send_command uses it to keep the
+    optimistic cache entry for the written href complete (every sibling
+    option still present) during the write-settle window, since the wire
+    body it applies straight to the cache no longer carries them."""
+    merged = list(cached or [])
+    for token in new_tokens or ():
+        if not isinstance(token, str) or '_' not in token:
+            continue
+        prefix = token.split('_', 1)[0]
+        replaced = False
+        for i, o in enumerate(merged):
+            if isinstance(o, str) and o.startswith(prefix + '_'):
+                merged[i] = token
+                replaced = True
+        if not replaced:
+            merged.append(token)
+    return merged
+
+
+def sensor_item_value(items, sensor_type, index=0):
+    """Pull one reading out of a `/sensors/vs/0`-style items[] list -- each
+    item is `{type, value: [...]}`; `index` picks which slot of a possibly
+    multi-value reading to read (index 0 is the raw measurement on every
+    family seen so far). Shared by range_hood.AIR_QUALITY and
+    air_purifier.AIR_QUALITY, which read the same resource shape."""
+    for item in items or ():
+        if not isinstance(item, dict):
+            continue
+        if item.get('x.com.samsung.da.type') != sensor_type:
+            continue
+        values = item.get('x.com.samsung.da.value') or ()
+        if index < len(values):
+            try:
+                return int(values[index])
+            except (TypeError, ValueError):
+                return None
+    return None
+
+
 # OCF-native / vendor '-vs' fallback pairs for power, kids-lock, remote control.
 #
 # These three controls exist as both a standard OCF resource (/power/0,
@@ -73,7 +129,6 @@ POWER_GENERIC = Capability(
     href='/power/0',
     entities=(
         SwitchDesc(key='power_switch', field='value',
-                   name='Power',
                    value_fn=lambda v: bool(v),
                    write_fn=lambda p, rep, href=None: (
                        ['power', '0'], {'value': p == 'On'})),
@@ -85,7 +140,6 @@ POWER_VS_FALLBACK = Capability(
     match_fn=lambda rep, resources: '/power/0' not in resources,
     entities=(
         SwitchDesc(key='power_switch', field='x.com.samsung.da.power',
-                   name='Power',
                    value_fn=lambda v: v == 'On',
                    write_fn=lambda p, rep, href=None: (
                        ['power', 'vs', '0'],
@@ -97,7 +151,7 @@ KIDS_LOCK_GENERIC = Capability(
     href='/kidslock/0',
     entities=(
         SwitchDesc(key='child_lock', field='value',
-                   name='Child lock', device_class='lock',
+                   device_class='lock',
                    value_fn=lambda v: bool(v),
                    write_fn=lambda p, rep, href=None: (
                        ['kidslock', '0'], {'value': p == 'On'})),
@@ -109,7 +163,7 @@ KIDS_LOCK_VS_FALLBACK = Capability(
     match_fn=lambda rep, resources: '/kidslock/0' not in resources,
     entities=(
         SwitchDesc(key='child_lock', field='x.com.samsung.da.kidsLock',
-                   name='Child lock', device_class='lock',
+                   device_class='lock',
                    value_fn=lambda v: v != 'Ready',
                    write_fn=lambda p, rep, href=None: (
                        ['kidslock', 'vs', '0'],
@@ -117,11 +171,33 @@ KIDS_LOCK_VS_FALLBACK = Capability(
     ),
 )
 
+
+def remote_control_enabled(resources: dict) -> bool:
+    """Single source of truth for the /remotectrl on/off signal, mirroring
+    REMOTE_CONTROL_GENERIC/_VS_FALLBACK's href/field pair and precedence
+    below. Used both to render the read-only Smart Control binary_sensor
+    (via those two descriptors) and, from coordinator.async_send_command,
+    to block writes outright when remote control is off. Both hrefs are
+    poll_tier='warm' below so that gate reads recent state (subscribed
+    when observe is live, subpolled every ~6s otherwise) rather than a
+    once-per-30s cold summary poll. True (assume enabled) when neither
+    href is present -- most device types don't report this capability
+    at all."""
+    generic = resources.get('/remotectrl/0')
+    if generic is not None:
+        return bool(generic.get('value'))
+    fallback = resources.get('/remotectrl/vs/0')
+    if fallback is not None:
+        return str(fallback.get('x.com.samsung.da.remoteControlEnabled')).lower() == 'true'
+    return True
+
+
 REMOTE_CONTROL_GENERIC = Capability(
     href='/remotectrl/0',
+    poll_tier='warm',
     entities=(
         BinarySensorDesc(key='remote_control', field='value',
-                         name='Smart Control', device_class='connectivity',
+                         device_class='connectivity',
                          value_fn=lambda v: bool(v)),
     ),
 )
@@ -129,10 +205,11 @@ REMOTE_CONTROL_GENERIC = Capability(
 REMOTE_CONTROL_VS_FALLBACK = Capability(
     href='/remotectrl/vs/0',
     match_fn=lambda rep, resources: '/remotectrl/0' not in resources,
+    poll_tier='warm',
     entities=(
         BinarySensorDesc(key='remote_control',
                          field='x.com.samsung.da.remoteControlEnabled',
-                         name='Smart Control', device_class='connectivity',
+                         device_class='connectivity',
                          value_fn=lambda v: str(v).lower() == 'true'),
     ),
 )
@@ -142,7 +219,7 @@ ALARMS = Capability(
     poll_tier='hot',
     entities=(
         SensorDesc(key='alarm_code', field='x.com.samsung.da.items',
-                   name='Alarm code', icon='mdi:alert',
+                   icon='mdi:alert',
                    entity_category='diagnostic', value_fn=_active_alarm_codes),
     ),
 )
@@ -165,13 +242,13 @@ ENERGY_METER = Capability(
         # entity when /device/0 returns a not-yet-fetched stub. On a populated
         # rep, hide power only for the dead sentinel or an absent field.
         SensorDesc(key='power_watts', field='x.com.samsung.da.instantaneousPower',
-                   name='Power', device_class='power', state_class='measurement',
+                   device_class='power', state_class='measurement',
                    unit='W', value_fn=clamp_power,
                    exists_fn=lambda rep, resources: not rep or (
                        rep.get('x.com.samsung.da.instantaneousPower')
                        not in (None, _DEAD_INSTANTANEOUS_POWER))),
         SensorDesc(key='energy_kwh', field='x.com.samsung.da.cumulativePower',
-                   name='Energy', device_class='energy',
+                   device_class='energy',
                    state_class='total_increasing', unit='kWh', value_fn=wh_to_kwh,
                    exists_fn=lambda rep, resources: (
                        not rep or 'x.com.samsung.da.cumulativePower' in rep)),
@@ -182,7 +259,7 @@ ENERGY_METER = Capability(
         # energy_kwh above -- without it, an exists_fn permanently drops the
         # entity if setup happens to land on a not-yet-fetched stub.
         SensorDesc(key='power_energy_kwh', field='x.com.samsung.da.cumulativeConsumption',
-                   name='Power energy', device_class='energy',
+                   device_class='energy',
                    state_class='total_increasing', unit='kWh', value_fn=wh_to_kwh,
                    exists_fn=lambda rep, resources: (
                        not rep or 'x.com.samsung.da.cumulativeConsumption' in rep)),
@@ -190,7 +267,7 @@ ENERGY_METER = Capability(
         # baseline -- present on some models (e.g. TP1X_REF_21K, issue #21/
         # #27) and absent on others (issue #20/#26), unlike cumulativePower.
         SensorDesc(key='energy_saved_kwh', field='x.com.samsung.da.cumulativeSavedPower',
-                   name='Energy saved', device_class='energy',
+                   device_class='energy',
                    state_class='total_increasing', unit='kWh', value_fn=wh_to_kwh,
                    exists_fn=lambda rep, resources: (
                        not rep or 'x.com.samsung.da.cumulativeSavedPower' in rep)),
@@ -198,12 +275,12 @@ ENERGY_METER = Capability(
         # in-progress current month. Not ever-increasing (each resets at
         # month boundary), so no state_class.
         SensorDesc(key='energy_last_month_kwh', field='x.com.samsung.da.monthlyConsumption',
-                   name='Energy (last month)', device_class='energy',
+                   device_class='energy',
                    unit='kWh', value_fn=wh_to_kwh,
                    exists_fn=lambda rep, resources: (
                        not rep or 'x.com.samsung.da.monthlyConsumption' in rep)),
         SensorDesc(key='energy_this_month_kwh', field='x.com.samsung.da.thismonthlyConsumption',
-                   name='Energy (this month)', device_class='energy',
+                   device_class='energy',
                    unit='kWh', value_fn=wh_to_kwh,
                    exists_fn=lambda rep, resources: (
                        not rep or 'x.com.samsung.da.thismonthlyConsumption' in rep)),
@@ -214,7 +291,7 @@ WATER_METER = Capability(
     href='/water/consumption/vs/0',
     entities=(
         SensorDesc(key='water_liters', field='x.com.samsung.da.cumulativeWater',
-                   name='Water consumption', device_class='water',
+                   device_class='water',
                    state_class='total_increasing', unit='L', icon='mdi:water',
                    value_fn=_ml_to_l),
     ),
@@ -225,9 +302,171 @@ WATER_FILTER = Capability(
     match_fn=lambda rep, _: rep.get('x.com.samsung.da.filterStatus', '').lower() != 'notused',
     entities=(
         SensorDesc(key='filter_usage', field='x.com.samsung.da.filterUsage',
-                   name='Filter usage', unit='%', state_class='measurement',
+                   unit='%', state_class='measurement',
                    icon='mdi:filter'),
         SensorDesc(key='filter_status', field='x.com.samsung.da.filterStatus',
-                   name='Filter status', icon='mdi:filter-check'),
+                   icon='mdi:filter-check',
+                   device_class='enum', options=('normal', 'wash', 'replace'),
+                   value_fn=lambda value: (
+                       value.lower() if isinstance(value, str) else value
+                   )),
     ),
 )
+
+# AI energy-saving level -- '0' is off, and supportedAiLevel lists the
+# additional level(s) the device offers ('1' meaning just "on" on most
+# hardware, but multi-level boards have been reported). Verified cross-family:
+# fridge (issue #21) and washer (issue #40) both expose this href.
+#
+# supportedAiLevel is a single-entry list on most captured hardware, where a
+# select would offer only one real choice against an implicit "off" -- shown
+# as a switch instead. '0' itself is never in supportedAiLevel but has been
+# observed live as the off value of aiLevel, so the select synthesizes it
+# back in as an explicit option rather than leaving no way to turn off.
+#
+# No translation_key: aiLevel's values are plain digit strings, and
+# select.py's _display() already renders an untranslated numeric string
+# as-is -- there's nothing a catalog entry adds that's worth maintaining
+# against an unknown, growing number of future levels.
+
+
+def _ai_energy_supported_levels(rep):
+    """supportedAiLevel as a list -- a stray scalar (e.g. a string) must not
+    be len()-checked as if it were a list."""
+    sl = rep.get('supportedAiLevel')
+    return list(sl) if isinstance(sl, (list, tuple)) else []
+
+
+def _ai_energy_level_options(resources):
+    rep = resources.get('/energy/ailevel/vs/0') or {}
+    return ['0', *_ai_energy_supported_levels(rep)]
+
+
+def _ai_energy_level_write(p, rep, href=None):
+    return ['energy', 'ailevel', 'vs', '0'], {'aiLevel': p}
+
+
+def _ai_energy_level_switch_write(p, rep, href=None):
+    levels = _ai_energy_supported_levels(rep)
+    on_level = levels[0] if levels else '1'
+    return ['energy', 'ailevel', 'vs', '0'], {'aiLevel': on_level if p == 'On' else '0'}
+
+
+AI_ENERGY_LEVEL = Capability(
+    href='/energy/ailevel/vs/0',
+    poll_tier='cold',
+    entities=(
+        # No `not rep` stub carve-out on either side, unlike most exists_fn
+        # gates in this file -- entity creation only ever runs once, against
+        # whichever snapshot happens to be current the moment platforms are
+        # set up (see entity._is_included / __init__.py's
+        # async_config_entry_first_refresh-before-forward-entry-setups
+        # ordering), while flatten() re-evaluates exists_fn every poll
+        # against live data. Both descriptors share key='ai_energy_level',
+        # so if a stub carve-out let one of them win at setup time while the
+        # other wins once real data lands, flatten() would feed the
+        # instantiated entity a value shaped for the other platform (e.g. a
+        # bool into a Select). Requiring real, populated data on both sides
+        # keeps the entity-creation decision and the live-value decision in
+        # permanent agreement -- the cost is this entity doesn't appear
+        # until a reload if the device's very first poll stubs this
+        # cold-tier href, the same reload already required to fix which
+        # platform got picked in that case.
+        SwitchDesc(key='ai_energy_level', field='aiLevel',
+                   icon='mdi:leaf',
+                   entity_category='config',
+                   value_fn=lambda v: v != '0',
+                   exists_fn=lambda rep, resources: (
+                       len(_ai_energy_supported_levels(rep)) == 1),
+                   write_fn=_ai_energy_level_switch_write),
+        SelectDesc(key='ai_energy_level', field='aiLevel',
+                   icon='mdi:leaf',
+                   entity_category='config',
+                   options=_ai_energy_level_options,
+                   exists_fn=lambda rep, resources: (
+                       len(_ai_energy_supported_levels(rep)) > 1),
+                   write_fn=_ai_energy_level_write),
+    ),
+)
+
+FIRMWARE_UPDATE = Capability(
+    href='/otninformation/vs/0',
+    poll_tier='cold',
+    entities=(
+        BinarySensorDesc(
+            key='firmware_update',
+            field='x.com.samsung.da.newVersionAvailable',
+            device_class='update',
+            entity_category='diagnostic',
+            value_fn=lambda v: str(v).lower() == 'true' if v is not None else None,
+        ),
+    ),
+)
+
+SELF_CHECK = Capability(
+    href='/selfcheck/vs/0',
+    poll_tier='cold',
+    entities=(
+        SensorDesc(key='selfcheck_status', field='x.com.samsung.da.status',
+                   icon='mdi:stethoscope',
+                   entity_category='diagnostic'),
+        SensorDesc(key='selfcheck_result', field='x.com.samsung.da.result',
+                   icon='mdi:clipboard-check-outline',
+                   entity_category='diagnostic'),
+        # List of error codes from the last self-check; joined for display.
+        # Not every fridge reports the field, hence the exists_fn.
+        SensorDesc(key='selfcheck_error', field='x.com.samsung.da.error',
+                   icon='mdi:alert-circle-outline',
+                   entity_category='diagnostic',
+                   exists_fn=lambda rep, resources: (
+                       not rep or 'x.com.samsung.da.error' in rep),
+                   value_fn=lambda v: (', '.join(v) if v else None) if isinstance(v, list) else v),
+        ButtonDesc(key='selfcheck_start', field='', payload='Start',
+                   icon='mdi:play-circle-outline',
+                   entity_category='diagnostic',
+                   write_fn=lambda p, rep, href=None: (
+                       ['selfcheck', 'vs', '0'], {'x.com.samsung.da.status': p})),
+    ),
+)
+
+# ---------------------------------------------------------------------------
+# Cross-family bundles, unpacked into every by_type registry's _build([...])
+# call the same way ignored.IGNORED is (*common.UNIVERSAL / *common.POWER).
+# discover() only binds a capability whose href is actually present in a
+# given device's resource dump, so listing one here for a family that
+# doesn't expose the href is a no-op, not a phantom entity -- see the
+# adding-device-support skill's coverage-discipline section.
+#
+# UNIVERSAL holds every capability with no known family that both (a) has
+# the href and (b) needs to model it some other way -- broadening one of
+# these to a new family is a safe, harmless guess (issue #40's AI energy
+# level: 2 of 6 families confirmed, blanket-added everywhere else).
+#
+# POWER is kept separate -- airconditioner is the one family that opts out
+# of it. Canonical reason (see by_type/airconditioner.py and its test for
+# pointers back here, not restatements): AC's climate entity already owns
+# /power/0 and /power/vs/0 via bare, no-entity Capability objects
+# (airconditioner.COVERAGE), and a second, real POWER_GENERIC/
+# POWER_VS_FALLBACK cap on the same href would make _build() raise (a href
+# with >1 cap must have every cap discriminated by rt_filter/match_fn, and
+# the bare COVERAGE cap has neither). Kids-lock/remote-control don't have
+# this conflict -- no AC dump has ever reported those hrefs -- so they stay
+# in UNIVERSAL.
+# ---------------------------------------------------------------------------
+
+UNIVERSAL = (
+    ALARMS,
+    ENERGY_METER,
+    FIRMWARE_UPDATE,
+    SELF_CHECK,
+    AI_ENERGY_LEVEL,
+    KIDS_LOCK_GENERIC,
+    KIDS_LOCK_VS_FALLBACK,
+    REMOTE_CONTROL_GENERIC,
+    REMOTE_CONTROL_VS_FALLBACK,
+)
+
+POWER = (
+    POWER_GENERIC,
+    POWER_VS_FALLBACK,
+)

custom_components/localthings/registry/capabilities/cooktop.py

@@ -0,0 +1,185 @@
+"""Read-only capabilities for Samsung cooktops.
+
+The first verified device is an NA9300K-class five-burner gas cooktop.  Its
+local OCF API reports burner state as strings embedded in the
+``x.com.samsung.da.options`` array on ``/mode/vs/0``.  Heat-producing controls
+are intentionally not exposed: the local write contract is unverified and a
+cooktop must not be remotely ignited by an automation.
+"""
+
+import re
+
+from ..capability import Capability
+from ..entities import BinarySensorDesc, SensorDesc
+
+
+_INACTIVE_OPERATION_STATES = {'Off', 'Ready'}
+
+
+def _option_value(options, prefix):
+    """Return the value from the first ``<prefix>_<value>`` option."""
+    marker = prefix + '_'
+    for option in options or ():
+        if isinstance(option, str) and option.startswith(marker):
+            return option[len(marker):]
+    return None
+
+
+def _operation_slots(options) -> tuple[int, ...]:
+    """Return the numeric burner slots advertised in an options array."""
+    slots = set()
+    for option in options or ():
+        if not isinstance(option, str):
+            continue
+        match = re.match(r'^OperationState(\d+)_', option)
+        if match:
+            slots.add(int(match.group(1)))
+    return tuple(sorted(slots))
+
+
+def _any_burner_active(options):
+    """True when any advertised burner slot is not idle."""
+    states = [
+        _option_value(options, f'OperationState{slot}')
+        for slot in _operation_slots(options)
+    ]
+    states = [state for state in states if state is not None]
+    return any(state not in _INACTIVE_OPERATION_STATES for state in states)
+
+
+def _int_or_none(value):
+    try:
+        return int(value)
+    except (TypeError, ValueError):
+        return None
+
+
+COOKTOP_POWER = Capability(
+    href='/power/vs/0',
+    poll_tier='hot',
+    entities=(
+        BinarySensorDesc(
+            key='power_state',
+            field='x.com.samsung.da.power',
+            device_class='power',
+            icon='mdi:stove',
+            value_fn=lambda value: str(value).lower() == 'on',
+        ),
+    ),
+)
+
+
+# The verified NA9300K exposes physical slots 0, 1, 3, 4, and 5.  Declare a
+# generous static superset so variants with other layouts are not silently
+# omitted; exists_fn hides every slot the live options array does not report.
+# Replace this bound with data-driven entity generation when #31 lands.
+_SUPPORTED_OPERATION_SLOTS = tuple(range(8))
+
+COOKTOP_MODE = Capability(
+    href='/mode/vs/0',
+    poll_tier='hot',
+    entities=(
+        BinarySensorDesc(
+            key='any_burner_active',
+            field='x.com.samsung.da.options',
+            device_class='running',
+            icon='mdi:fire',
+            value_fn=_any_burner_active,
+        ),
+        *(
+            SensorDesc(
+                key=f'burner_{slot}_state',
+                field='x.com.samsung.da.options',
+                translation_key='burner_state',
+                translation_placeholders={'number': str(slot)},
+                icon='mdi:gas-burner',
+                value_fn=lambda options, slot=slot: _option_value(
+                    options, f'OperationState{slot}'
+                ),
+                exists_fn=lambda rep, resources, slot=slot: (
+                    not rep or _option_value(
+                        rep.get('x.com.samsung.da.options'),
+                        f'OperationState{slot}',
+                    ) is not None
+                ),
+            )
+            for slot in _SUPPORTED_OPERATION_SLOTS
+        ),
+        SensorDesc(
+            key='main_timer_state',
+            field='x.com.samsung.da.options',
+            icon='mdi:timer-outline',
+            value_fn=lambda options: _option_value(options, 'MainTimerState'),
+        ),
+        SensorDesc(
+            key='main_timer_current',
+            field='x.com.samsung.da.options',
+            icon='mdi:timer-sand',
+            enabled_default=False,
+            value_fn=lambda options: _int_or_none(
+                _option_value(options, 'MainTimerCurrent')
+            ),
+        ),
+    ),
+)
+
+
+COOKTOP_CONNECTED = Capability(
+    href='/connected/vs/0',
+    poll_tier='warm',
+    entities=(
+        BinarySensorDesc(
+            key='cloud_connected',
+            field='x.com.samsung.da.connected',
+            device_class='connectivity',
+            entity_category='diagnostic',
+            value_fn=lambda value: str(value).lower() == 'on',
+        ),
+    ),
+)
+
+
+PAIRED_HOOD_STATUS = Capability(
+    href='/bluetooth/hood/status/vs/0',
+    poll_tier='hot',
+    entities=(
+        BinarySensorDesc(
+            key='paired_hood_connected',
+            field='connectionState',
+            device_class='connectivity',
+            value_fn=lambda value: str(value).lower() == 'connected',
+        ),
+        BinarySensorDesc(
+            key='paired_hood_power',
+            field='power',
+            device_class='running',
+            value_fn=lambda value: str(value).lower() == 'on',
+        ),
+        SensorDesc(
+            key='paired_hood_fan_speed',
+            field='fanSpeed',
+            icon='mdi:fan',
+            value_fn=_int_or_none,
+        ),
+        BinarySensorDesc(
+            key='paired_hood_light',
+            field='lampState',
+            device_class='light',
+            value_fn=lambda value: str(value).lower() == 'on',
+        ),
+        SensorDesc(
+            key='paired_hood_model',
+            field='micomModelId',
+            icon='mdi:information-outline',
+            entity_category='diagnostic',
+            enabled_default=False,
+        ),
+        SensorDesc(
+            key='paired_hood_firmware',
+            field='firmwareVersion',
+            icon='mdi:chip',
+            entity_category='diagnostic',
+            enabled_default=False,
+        ),
+    ),
+)

custom_components/localthings/registry/capabilities/dishwasher.py

@@ -8,7 +8,7 @@ wash, auto release dry) are read locally here.
 """
 from ..capability import Capability
 from ..entities import ButtonDesc, SelectDesc, SensorDesc, SwitchDesc
-from .laundry import cycle_select, option_value, replace_in_options
+from .laundry import bool_option_switch, cycle_select
 
 # ---------------------------------------------------------------------------
 # /dishwasher/vs/0 — cycle wash/dry settings
@@ -18,13 +18,13 @@ DISHWASHER_SETTINGS = Capability(
     href='/dishwasher/vs/0',
     entities=(
         SwitchDesc(key='sanitize', field='x.com.samsung.da.sanitize',
-                   name='Sanitize', icon='mdi:bacteria',
+                   icon='mdi:bacteria',
                    value_fn=lambda v: v == 'On',
                    write_fn=lambda p, rep, href=None: (
                        ['dishwasher', 'vs', '0'],
                        {'x.com.samsung.da.sanitize': 'On' if p == 'On' else 'Off'})),
         SelectDesc(key='heated_dry', field='x.com.samsung.da.heatedDry',
-                   name='Smart Dry', icon='mdi:heat-wave',
+                   icon='mdi:heat-wave',
                    options_field='x.com.samsung.da.supportedHeatedDry',
                    write_fn=lambda p, rep, href=None: (
                        ['dishwasher', 'vs', '0'],
@@ -35,49 +35,20 @@ DISHWASHER_SETTINGS = Capability(
 # ---------------------------------------------------------------------------
 # /course/vs/0 — cycle selection (shared laundry.cycle_select) plus the
 # dishwasher-only StormWashZone / AutoDoorRelease toggles that ride in the
-# same options array. Course display names live in translations under
+# same options array (shared laundry.bool_option_switch, same options[]
+# boolean-toggle contract washer's bubble-soak/pre-wash/intensive switches
+# use). Course display names live in translations under
 # entity.select.dishwasher_cycle (see laundry.cycle_select).
 # ---------------------------------------------------------------------------
 
-
-def _storm_wash_write(p, rep, href=None):
-    if p not in ('On', 'Off'):
-        return None
-    opts = list(rep.get('x.com.samsung.da.options') or [])
-    if not opts:
-        return None
-    return ['course', 'vs', '0'], {
-        'x.com.samsung.da.options': replace_in_options(opts, 'StormWashZone', p),
-    }
-
-
-def _auto_release_write(p, rep, href=None):
-    if p not in ('On', 'Off'):
-        return None
-    opts = list(rep.get('x.com.samsung.da.options') or [])
-    if not opts:
-        return None
-    return ['course', 'vs', '0'], {
-        'x.com.samsung.da.options': replace_in_options(opts, 'AutoDoorRelease', p),
-    }
-
-
 CYCLE_OPTIONS = Capability(
     href='/course/vs/0',
     entities=(
         cycle_select(translation_key='dishwasher_cycle', icon='mdi:dishwasher'),
-        SwitchDesc(key='storm_wash', name='Storm Wash+', icon='mdi:weather-lightning-rainy',
-                   rep_fn=lambda rep: option_value(
-                       rep.get('x.com.samsung.da.options'), 'StormWashZone') == 'On',
-                   write_fn=_storm_wash_write),
-        SwitchDesc(key='auto_release_dry', name='Auto release dry', icon='mdi:door-open',
-                   exists_fn=lambda rep, resources: any(
-                       isinstance(o, str) and o.startswith('AutoDoorRelease_')
-                       for o in (rep.get('x.com.samsung.da.options') or [])
-                   ),
-                   rep_fn=lambda rep: option_value(
-                       rep.get('x.com.samsung.da.options'), 'AutoDoorRelease') == 'On',
-                   write_fn=_auto_release_write),
+        bool_option_switch('storm_wash', 'mdi:weather-lightning-rainy',
+                            'StormWashZone'),
+        bool_option_switch('auto_release_dry', 'mdi:door-open',
+                            'AutoDoorRelease', gate_on_presence=True),
     ),
 )
 
@@ -90,10 +61,10 @@ DIAGNOSIS = Capability(
     poll_tier='cold',
     entities=(
         SensorDesc(key='diagnosis_status', field='x.com.samsung.da.diagnosisStart',
-                   name='Diagnosis status', icon='mdi:stethoscope',
+                   icon='mdi:stethoscope',
                    entity_category='diagnostic'),
-        ButtonDesc(key='diagnosis_start', field='', name='Start diagnosis',
-                   payload='Start', icon='mdi:play-circle-outline',
+        ButtonDesc(key='diagnosis_start', field='', payload='Start',
+                   icon='mdi:play-circle-outline',
                    entity_category='diagnostic',
                    write_fn=lambda p, rep, href=None: (
                        ['diagnosis', 'vs', '0'], {'x.com.samsung.da.diagnosisStart': p})),
@@ -105,7 +76,7 @@ OPERATION_ORIGIN = Capability(
     poll_tier='cold',
     entities=(
         SensorDesc(key='operation_origin', field='origin',
-                   name='Last operation source', icon='mdi:remote',
+                   icon='mdi:remote',
                    entity_category='diagnostic'),
     ),
 )

custom_components/localthings/registry/capabilities/dryer.py

@@ -24,13 +24,13 @@ DRYER_SETTINGS = Capability(
     poll_tier='warm',
     entities=(
         SensorDesc(key='dry_level', field='x.com.samsung.da.dryLevel',
-                   name='Dry level', icon='mdi:water-percent'),
+                   icon='mdi:water-percent'),
         SensorDesc(key='dry_time', field='x.com.samsung.da.dryTime',
-                   name='Dry time', icon='mdi:timer'),
+                   icon='mdi:timer'),
         SensorDesc(key='dryer_type', field='x.com.samsung.da.dryerType',
-                   name='Dryer type', icon='mdi:tumble-dryer'),
+                   icon='mdi:tumble-dryer'),
         SwitchDesc(key='wrinkle_prevent', field='x.com.samsung.da.wrinklePrevent',
-                   name='Wrinkle prevent', icon='mdi:iron',
+                   icon='mdi:iron',
                    value_fn=lambda v: v == 'On',
                    write_fn=_wrinkle_write),
     ),
@@ -48,7 +48,8 @@ DRYER_SETTINGS = Capability(
 DRYER_COURSE = Capability(
     href='/course/vs/0',
     entities=(
-        cycle_select(translation_key='dryer_cycle', icon='mdi:tumble-dryer'),
+        cycle_select(translation_key='dryer_cycle', icon='mdi:tumble-dryer',
+                     table_href='/st/dryercourse/vs/0'),
     ),
 )
 
@@ -57,6 +58,6 @@ DRYER_DIAGNOSIS = Capability(
     poll_tier='warm',
     entities=(
         SensorDesc(key='diagnosis', field='x.com.samsung.da.diagnosisStart',
-                   name='Diagnosis', entity_category='diagnostic'),
+                   entity_category='diagnostic'),
     ),
 )

custom_components/localthings/registry/capabilities/fridge.py

@@ -19,13 +19,13 @@ import datetime
 
 from ..capability import Capability
 from ..entities import (
-    BinarySensorDesc, ButtonDesc, NumberDesc, SelectDesc, SensorDesc,
+    BinarySensorDesc, NumberDesc, SelectDesc, SensorDesc,
     SwitchDesc, TimeDesc,
 )
 from .common import normalize_temp_unit
 
 # Display names for the beverage zone, flex zone, ice type, and
-# ice-making-status enums below live in strings.json / translations/en.json,
+# ice-making-status enums below live in translations/en.json,
 # keyed by the lowercased raw device value — select.py and SensorDesc.options
 # normalize to lowercase for HA's translation lookup and map back to this
 # original casing before writing to the device.
@@ -55,7 +55,8 @@ TEMP_CURRENT_GENERIC = Capability(
     poll_tier='warm',
     entities=(
         SensorDesc(key='temperature', field='temperature',
-                   name=None, icon='mdi:thermometer',
+                   translation_key='instance_temperature',
+                   use_instance_name=True, icon='mdi:thermometer',
                    device_class='temperature', unit_fn=_temp_unit,
                    state_class='measurement'),
     ),
@@ -68,7 +69,8 @@ TEMP_SETPOINT_GENERIC = Capability(
     poll_tier='warm',
     entities=(
         NumberDesc(key='setpoint', field='temperature',
-                   name=None, device_class='temperature', unit_fn=_temp_unit,
+                   translation_key='instance_setpoint',
+                   use_instance_name=True, device_class='temperature', unit_fn=_temp_unit,
                    native_min=-20.0, native_max=50.0,
                    range_field='range', entity_category='config',
                    write_fn=lambda p, rep, href=None: (
@@ -87,12 +89,12 @@ ICEMAKER_NIGHTTIME = Capability(
     poll_tier='warm',
     entities=(
         SwitchDesc(key='ice_night_mode', field='ice.night.status',
-                   name='Nighttime ice quiet mode', icon='mdi:weather-night',
+                   icon='mdi:weather-night',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=lambda p, rep, href=None: (
                        ['icemaker', 'nighttime', 'vs', '0'],
-                       {'ice.night.status': 'On' if p else 'Off'})),
+                       {'ice.night.status': 'On' if p == 'On' else 'Off'})),
     ),
 )
 
@@ -100,6 +102,13 @@ ICEMAKER_NIGHTTIME = Capability(
 # Icemaker (generic — covers /icemaker/one/vs/0, /icemaker/two/vs/0)
 # /icemaker/status/vs/0 is kept as exact-href cap and binds first.
 # /icemaker/nighttime/vs/0 is excluded by match_fn (lacks iceMaker.state).
+#
+# Entity names interpolate x.com.samsung.da.iceMaker.name ("CUBED_ICE",
+# "ICE_BITES") -- read via name_field, reaching the translated name as the
+# {instance_name} placeholder -- not the href's "one"/"two" segment. These two
+# ice makers are independent on/off toggles that can both be enabled at once
+# (issue #27), so they stay separate entities rather than a single ice-type
+# select, but users still want them labeled with the device's own names.
 # ---------------------------------------------------------------------------
 
 def _icemaker_write(field):
@@ -112,21 +121,23 @@ ICEMAKER_GENERIC = Capability(
     href=None,
     href_prefix='/icemaker/',
     match_fn=lambda rep, resources: 'x.com.samsung.da.iceMaker.state' in rep,
+    name_field='x.com.samsung.da.iceMaker.name',
     poll_tier='warm',
     entities=(
         SensorDesc(key='making_status',
                    field='x.com.samsung.da.iceMaker.iceMakingStatus',
-                   name=None, icon='mdi:cube-outline',
+                   use_instance_name=True, icon='mdi:cube-outline',
                    device_class='enum',
                    options=('icestatus_stop', 'icestatus_run'),
                    translation_key='ice_making_status',
                    value_fn=lambda v: v.lower() if isinstance(v, str) else v),
         SwitchDesc(key='enabled', field='x.com.samsung.da.iceMaker.state',
-                   name=None, icon='mdi:cube-outline',
+                   translation_key='instance_enabled',
+                   use_instance_name=True, icon='mdi:cube-outline',
                    value_fn=lambda v: v == 'On',
                    write_fn=_icemaker_write('x.com.samsung.da.iceMaker.state')),
         SelectDesc(key='type', field='x.com.samsung.da.iceType.desired',
-                   name=None, icon='mdi:cube-outline',
+                   use_instance_name=True, icon='mdi:cube-outline',
                    translation_key='ice_type',
                    entity_category='config',
                    options_field='x.com.samsung.da.iceType.supported',
@@ -144,7 +155,7 @@ DOOR_ALERT = Capability(
     poll_tier='warm',
     entities=(
         SelectDesc(key='door_alert', field='alert.door',
-                   name='Door alarm', icon='mdi:bell-alert',
+                   icon='mdi:bell-alert',
                    translation_key='door_alert',
                    entity_category='config',
                    options_field='supportedAlert.door',
@@ -161,7 +172,7 @@ DOOR_ALERT = Capability(
 def _status_lock_write(field):
     return lambda p, rep, href=None: (
         ['status', 'lock', 'vs', '0'],
-        {field: 'On' if p else 'Off'}
+        {field: 'On' if p == 'On' else 'Off'}
     )
 
 
@@ -170,12 +181,12 @@ STATUS_LOCK = Capability(
     poll_tier='warm',
     entities=(
         SwitchDesc(key='auto_door_opener', field='x.com.samsung.da.ado.devicecontrol',
-                   name='Auto door opener', icon='mdi:door-open',
+                   icon='mdi:door-open',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=_status_lock_write('x.com.samsung.da.ado.devicecontrol')),
         SwitchDesc(key='fridge_sound', field='x.com.samsung.da.device.sound',
-                   name='Sound', icon='mdi:volume-high',
+                   icon='mdi:volume-high',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=_status_lock_write('x.com.samsung.da.device.sound')),
@@ -200,12 +211,12 @@ DEFROST_DELAY = Capability(
     poll_tier='warm',
     entities=(
         SwitchDesc(key='defrost_delay', field='x.com.samsung.da.delayDefrost',
-                   name='Defrost delay', icon='mdi:snowflake-off',
+                   icon='mdi:snowflake-off',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=lambda p, rep, href=None: (
                        ['defrost', 'delay', 'vs', '0'],
-                       {'x.com.samsung.da.delayDefrost': 'On' if p else 'Off'})),
+                       {'x.com.samsung.da.delayDefrost': 'On' if p == 'On' else 'Off'})),
     ),
 )
 
@@ -222,34 +233,12 @@ DEFROST_BLOCK_STATUS = Capability(
     poll_tier='warm',
     entities=(
         BinarySensorDesc(key='defrost_active', field='x.com.samsung.da.modes',
-                         name='Defrost active', icon='mdi:snowflake-melt',
+                         icon='mdi:snowflake-melt',
                          entity_category='diagnostic',
                          value_fn=lambda modes: bool(modes) and modes[0] == 'DEFROST_BLOCK_ON'),
     ),
 )
 
-# ---------------------------------------------------------------------------
-# Self-check diagnostic
-# ---------------------------------------------------------------------------
-
-SELF_CHECK = Capability(
-    href='/selfcheck/vs/0',
-    poll_tier='cold',
-    entities=(
-        SensorDesc(key='selfcheck_status', field='x.com.samsung.da.status',
-                   name='Self-check status', icon='mdi:stethoscope',
-                   entity_category='diagnostic'),
-        SensorDesc(key='selfcheck_result', field='x.com.samsung.da.result',
-                   name='Self-check result', icon='mdi:clipboard-check-outline',
-                   entity_category='diagnostic'),
-        ButtonDesc(key='selfcheck_start', field='', name='Start self-check',
-                   payload='Start', icon='mdi:play-circle-outline',
-                   entity_category='diagnostic',
-                   write_fn=lambda p, rep, href=None: (
-                       ['selfcheck', 'vs', '0'], {'x.com.samsung.da.status': p})),
-    ),
-)
-
 # ---------------------------------------------------------------------------
 # Refrigeration modes (rapid cooling)
 # ---------------------------------------------------------------------------
@@ -267,12 +256,12 @@ REFRIGERATION = Capability(
     poll_tier='warm',
     entities=(
         SwitchDesc(key='rapid_fridge', field='x.com.samsung.da.rapidFridge',
-                   name='Rapid fridge', icon='mdi:fridge-industrial',
+                   icon='mdi:fridge-industrial',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=_refrigeration_write('x.com.samsung.da.rapidFridge')),
         SwitchDesc(key='rapid_freezing', field='x.com.samsung.da.rapidFreezing',
-                   name='Rapid freezing', icon='mdi:snowflake',
+                   icon='mdi:snowflake',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=_refrigeration_write('x.com.samsung.da.rapidFreezing')),
@@ -294,7 +283,7 @@ AUTOFILL = Capability(
     poll_tier='warm',
     entities=(
         SwitchDesc(key='autofill', field='x.com.samsung.da.autofill',
-                   name='Autofill pitcher', icon='mdi:cup-water',
+                   icon='mdi:cup-water',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=_autofill_write),
@@ -310,12 +299,12 @@ WELCOME_LIGHTING = Capability(
     poll_tier='warm',
     entities=(
         SwitchDesc(key='welcome_lighting', field='status',
-                   name='Welcome lighting', icon='mdi:motion-sensor',
+                   icon='mdi:motion-sensor',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=lambda p, rep, href=None: (
                        ['proximity', 'vs', '0'],
-                       {'status': 'On' if p else 'Off'})),
+                       {'status': 'On' if p == 'On' else 'Off'})),
     ),
 )
 
@@ -401,15 +390,15 @@ CABINET_LIGHT_ENHANCED = Capability(
     poll_tier='warm',
     entities=(
         SelectDesc(key='day_brightness', field='level.brightness.daytime',
-                   name='Cabinet brightness', icon='mdi:brightness-5',
-                   translation_key='brightness_level',
+                   icon='mdi:brightness-5',
+                   translation_key='day_brightness',
                    entity_category='config',
                    options=_NIGHT_BRIGHTNESS_OPTIONS,
                    write_fn=lambda p, rep, href=None: (
                        ['cabinet', 'light', 'enhanced', 'vs', '0'],
                        {'level.brightness.daytime': p})),
         SelectDesc(key='brightness_level', field='level.brightness.nighttime',
-                   name='Night brightness', icon='mdi:brightness-4',
+                   icon='mdi:brightness-4',
                    translation_key='brightness_level',
                    entity_category='config',
                    options=_NIGHT_BRIGHTNESS_OPTIONS,
@@ -417,12 +406,12 @@ CABINET_LIGHT_ENHANCED = Capability(
                        ['cabinet', 'light', 'enhanced', 'vs', '0'],
                        {'level.brightness.nighttime': p})),
         TimeDesc(key='night_start', field='',
-                 name='Night light start', icon='mdi:clock-start',
+                 icon='mdi:clock-start',
                  entity_category='config',
                  rep_fn=_night_start_value,
                  write_fn=_night_start_write),
         TimeDesc(key='night_end', field='',
-                 name='Night light end', icon='mdi:clock-end',
+                 icon='mdi:clock-end',
                  entity_category='config',
                  rep_fn=_night_end_value,
                  write_fn=_night_end_write),
@@ -446,16 +435,16 @@ CABINET_LIGHT = Capability(
     poll_tier='warm',
     entities=(
         SwitchDesc(key='cabinet_light_switch', field='x.com.samsung.da.lightControl',
-                   name='Cabinet light', icon='mdi:fridge-outline',
+                   icon='mdi:fridge-outline',
                    value_fn=lambda v: v == 'On',
                    write_fn=_cabinet_light_write),
         SwitchDesc(key='cabinet_light_dim', field='light.dimming.status',
-                   name='Brighten gradually', icon='mdi:brightness-auto',
+                   icon='mdi:brightness-auto',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=lambda p, rep, href=None: (
                        ['cabinet', 'light', 'total', 'vs', '0'],
-                       {'light.dimming.status': 'On' if p else 'Off'})),
+                       {'light.dimming.status': 'On' if p == 'On' else 'Off'})),
     ),
 )
 
@@ -474,7 +463,7 @@ SABBATH = Capability(
     poll_tier='warm',
     entities=(
         SwitchDesc(key='sabbath_mode', field='x.com.samsung.da.sabbathMode',
-                   name='Sabbath mode', icon='mdi:hands-pray',
+                   icon='mdi:hands-pray',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=_sabbath_write),
@@ -494,7 +483,7 @@ BEVERAGE_ZONE = Capability(
     poll_tier='warm',
     entities=(
         SelectDesc(key='beverage_zone_mode', field='roomDesiredMode',
-                   name='Beverage zone mode', icon='mdi:glass-wine',
+                   icon='mdi:glass-wine',
                    translation_key='beverage_zone_mode',
                    entity_category='config',
                    options_field='roomSupportedModes',
@@ -522,7 +511,7 @@ PANTRY_ZONE = Capability(
     poll_tier='warm',
     entities=(
         SelectDesc(key='pantry_zone_mode', field='x.com.samsung.da.mode',
-                   name='Pantry zone mode', icon='mdi:glass-wine',
+                   icon='mdi:glass-wine',
                    translation_key='pantry_zone_mode',
                    entity_category='config',
                    options_field='x.com.samsung.da.supportedOptions',
@@ -569,7 +558,7 @@ FLEX_ZONE = Capability(
     poll_tier='warm',
     entities=(
         SelectDesc(key='flex_zone_mode',
-                   name='Flex zone mode', icon='mdi:thermostat',
+                   icon='mdi:thermostat',
                    translation_key='flex_zone_mode',
                    entity_category='config',
                    options_field='x.com.samsung.da.supportedOptions',
@@ -580,25 +569,6 @@ FLEX_ZONE = Capability(
     ),
 )
 
-# ---------------------------------------------------------------------------
-# Firmware update
-# ---------------------------------------------------------------------------
-
-FIRMWARE_UPDATE = Capability(
-    href='/otninformation/vs/0',
-    poll_tier='cold',
-    entities=(
-        BinarySensorDesc(
-            key='firmware_update',
-            field='x.com.samsung.da.newVersionAvailable',
-            name='Firmware update available',
-            device_class='update',
-            entity_category='diagnostic',
-            value_fn=lambda v: str(v).lower() == 'true' if v is not None else None,
-        ),
-    ),
-)
-
 # ---------------------------------------------------------------------------
 # Generic door pattern capability (href=None — use as pattern_cap only)
 # ---------------------------------------------------------------------------
@@ -609,7 +579,8 @@ DOOR_GENERIC = Capability(
     poll_tier='hot',
     entities=(
         BinarySensorDesc(key='open', field='openState',
-                         name=None, device_class='door',
+                         translation_key='instance_open',
+                         use_instance_name=True, device_class='door',
                          value_fn=lambda v: v == 'Open'),
     ),
 )
@@ -638,7 +609,7 @@ DOORS_FALLBACK = Capability(
     poll_tier='hot',
     entities=(
         BinarySensorDesc(key='door_open', field='x.com.samsung.da.items',
-                         name='Door', device_class='door',
+                         device_class='door',
                          value_fn=lambda items: any(
                              i.get('x.com.samsung.da.openState') == 'Open'
                              for i in (items or []))),
@@ -670,13 +641,13 @@ TEMPERATURES_FALLBACK = Capability(
     poll_tier='warm',
     entities=(
         SensorDesc(key='freezer_temperature', field='x.com.samsung.da.items',
-                   name='Freezer temperature', icon='mdi:thermometer',
+                   icon='mdi:thermometer',
                    device_class='temperature', state_class='measurement',
                    unit_fn=lambda rep: _temp_item_unit(
                        rep.get('x.com.samsung.da.items'), 'Freezer'),
                    value_fn=lambda items: _temp_item_value(items, 'Freezer')),
         SensorDesc(key='fridge_temperature', field='x.com.samsung.da.items',
-                   name='Fridge temperature', icon='mdi:thermometer',
+                   icon='mdi:thermometer',
                    device_class='temperature', state_class='measurement',
                    unit_fn=lambda rep: _temp_item_unit(
                        rep.get('x.com.samsung.da.items'), 'Fridge'),
@@ -699,11 +670,11 @@ ICEMAKER_STATUS_FALLBACK = Capability(
     poll_tier='warm',
     entities=(
         SwitchDesc(key='ice_maker_enabled', field='x.com.samsung.da.iceMaker',
-                   name='Ice maker', icon='mdi:cube-outline',
+                   icon='mdi:cube-outline',
                    value_fn=lambda v: v == 'On',
                    write_fn=lambda p, rep, href=None: (
                        ['icemaker', 'status', 'vs', '0'],
-                       {'x.com.samsung.da.iceMaker': 'On' if p else 'Off'})),
+                       {'x.com.samsung.da.iceMaker': 'On' if p == 'On' else 'Off'})),
     ),
 )
 
@@ -729,17 +700,17 @@ REFRIGERATION_FALLBACK = Capability(
     poll_tier='warm',
     entities=(
         BinarySensorDesc(key='defrost_active', field='defrost',
-                         name='Defrost active', icon='mdi:snowflake-melt',
+                         icon='mdi:snowflake-melt',
                          entity_category='diagnostic',
                          value_fn=lambda v: bool(v),
                          exists_fn=lambda rep, resources: '/defrost/block/vs/0' not in resources),
         BinarySensorDesc(key='rapid_fridge', field='rapidCool',
-                         name='Rapid fridge', icon='mdi:fridge-industrial',
+                         icon='mdi:fridge-industrial',
                          entity_category='config',
                          value_fn=lambda v: bool(v),
                          exists_fn=lambda rep, resources: '/refrigeration/vs/0' not in resources),
         BinarySensorDesc(key='rapid_freezing', field='rapidFreeze',
-                         name='Rapid freezing', icon='mdi:snowflake',
+                         icon='mdi:snowflake',
                          entity_category='config',
                          value_fn=lambda v: bool(v),
                          exists_fn=lambda rep, resources: '/refrigeration/vs/0' not in resources),

custom_components/localthings/registry/capabilities/ignored.py

@@ -85,14 +85,9 @@ IGNORED: list[Capability] = [
     # Warranty/service-plan enrollment status — every field reads "Unknown"
     # on hardware not enrolled in a Samsung Care+ style program.
     Capability(href='/dginformation/vs/0'),
-    # AI energy-saving level; only one value ('1') is ever in
-    # supportedAiLevel on hardware seen so far, so there's no real choice
-    # to expose. Revisit if a device surfaces more than one supported level.
-    Capability(href='/energy/ailevel/vs/0'),
     # OCF-native vacation-mode flag (fridge). Only one value ('RVACATION_OFF')
-    # has ever been seen in `modes` (issue #7's dump), same "no real choice
-    # to expose yet" situation as /energy/ailevel/vs/0 above. Revisit if a
-    # device surfaces it toggled on.
+    # has ever been seen in `modes` (issue #7's dump) -- no real choice to
+    # expose yet. Revisit if a device surfaces it toggled on.
     Capability(href='/mode/0'),
     # Opaque integer with no supportedModes/options list to interpret it
     # against — meaning unclear from the raw resource alone.

custom_components/localthings/registry/capabilities/laundry.py

@@ -21,6 +21,7 @@ Door-LED keys use NO `x.com.samsung.da.` prefix -- `setBrightness` /
 """
 from datetime import time as dt_time
 
+from ...catalog import has_entity_translation
 from ..capability import Capability
 from ..entities import NumberDesc, SelectDesc, SensorDesc, SwitchDesc, TimeDesc
 
@@ -60,30 +61,30 @@ DOOR_LED = Capability(
     href='/doorled/light/vs/0',
     entities=(
         SelectDesc(key='led_brightness', field='setBrightness',
-                   name='Door LED brightness', icon='mdi:brightness-6',
+                   icon='mdi:brightness-6',
                    entity_category='config',
                    options=_LED_LEVELS, write_fn=_led_brightness_write),
         SwitchDesc(key='led_night_light', field='setNightLight',
-                   name='Door LED night light', icon='mdi:weather-night',
+                   icon='mdi:weather-night',
                    entity_category='config',
                    value_fn=lambda v: v == 'On',
                    write_fn=_led_night_write),
         SelectDesc(key='led_night_brightness', field='setNightLightBrightness',
-                   name='Door LED night brightness', icon='mdi:brightness-4',
+                   icon='mdi:brightness-4',
                    entity_category='config',
                    options=_LED_LEVELS,
                    write_fn=lambda p, rep, href=None: (
                        ['doorled', 'light', 'vs', '0'],
                        {'setNightLightBrightness': p})),
         TimeDesc(key='led_night_start', field='setNightLightTimeStart',
-                 name='Door LED night start', icon='mdi:clock-start',
+                 icon='mdi:clock-start',
                  entity_category='config',
                  value_fn=_parse_hm,
                  write_fn=lambda p, rep, href=None: (
                      ['doorled', 'light', 'vs', '0'],
                      {'setNightLightTimeStart': f'{p.hour:02d}:{p.minute:02d}'})),
         TimeDesc(key='led_night_end', field='setNightLightTimeEnd',
-                 name='Door LED night end', icon='mdi:clock-end',
+                 icon='mdi:clock-end',
                  entity_category='config',
                  value_fn=_parse_hm,
                  write_fn=lambda p, rep, href=None: (
@@ -96,7 +97,7 @@ SOUND_MODE = Capability(
     href='/settings/sound/mode/vs/0',
     entities=(
         SelectDesc(key='sound_mode', field='mode',
-                   name='Sound mode', icon='mdi:volume-high',
+                   icon='mdi:volume-high',
                    entity_category='config',
                    options=_SOUND_MODES, write_fn=_sound_mode_write),
     ),
@@ -106,7 +107,7 @@ SOUND_VOLUME = Capability(
     href='/settings/sound/volume/vs/0',
     entities=(
         NumberDesc(key='sound_volume', field='level',
-                   name='Sound volume', icon='mdi:volume-medium',
+                   icon='mdi:volume-medium',
                    entity_category='config',
                    native_min=0, native_max=15, step=5,
                    value_fn=lambda v: int(v) if v is not None else None,
@@ -127,13 +128,13 @@ BUZZER_SOUND = Capability(
     href='/buzzersound/vs/0',
     entities=(
         SelectDesc(key='buzzer_sound', field='setBuzzerSound',
-                   name='Buzzer sound', icon='mdi:volume-high',
+                   icon='mdi:volume-high',
                    entity_category='config',
                    options_field='supportedBuzzerSound',
                    write_fn=lambda p, rep, href=None: (
                        ['buzzersound', 'vs', '0'], {'setBuzzerSound': p})),
         SelectDesc(key='finish_sound', field='setFinishSound',
-                   name='Finish sound', icon='mdi:bell-ring',
+                   icon='mdi:bell-ring',
                    entity_category='config',
                    exists_fn=lambda rep, resources: 'supportedFinishSound' in rep,
                    options_field='supportedFinishSound',
@@ -146,9 +147,13 @@ BUZZER_SOUND = Capability(
 # Cycle selection over /course/vs/0.
 #
 # The selected course and every other user-tunable option ride in the
-# x.com.samsung.da.options array on /course/vs/0 as `<Prefix>_<value>` tokens;
-# a write is a read-modify-write of that whole array (cycle_write). The set of
-# *selectable* courses is not hardcoded -- it's read live from
+# x.com.samsung.da.options array on /course/vs/0 as `<Prefix>_<value>` tokens.
+# Confirmed on real hardware (issue #54): a write only needs to carry the one
+# changed token -- `{'x.com.samsung.da.options': ['SoftenerLevelCtrl_2']}` --
+# the device matches by prefix, evicts the stale token, and merges the result
+# into the array itself. No read-modify-write of the whole array needed (see
+# option_write). The set of *selectable* courses is not hardcoded -- it's read
+# live from
 # x.com.samsung.da.editCourseList on /wm/editcourse/vs/0 (cycle_options), so we
 # never show a course a given model doesn't have or hide one it does. Course
 # codes are uppercase hex; display names live in translations under
@@ -157,6 +162,11 @@ BUZZER_SOUND = Capability(
 # washer.py's course comment has the byte-level evidence for why the options[]
 # MostUsed_* entry is *not* a trustworthy second source.
 #
+# Some boards populate /wm/editcourse/vs/0 without ever filling in
+# editCourseList itself (issue #1) -- cycle_options() falls back to deriving
+# the same list from /course/vs/0's own supportedOptions in that case; see
+# _course_codes_from_supported_options for the byte-level evidence.
+#
 # Shared verbatim by washer, dishwasher, and dryer -- all DA_WM_-family boards
 # expose the same /course/vs/0 options contract.
 # ---------------------------------------------------------------------------
@@ -176,7 +186,10 @@ def parse_edit_course_list(raw):
 
 def cycle_options(resources):
     rep = resources.get('/wm/editcourse/vs/0') or {}
-    return parse_edit_course_list(rep.get('x.com.samsung.da.editCourseList'))
+    codes = parse_edit_course_list(rep.get('x.com.samsung.da.editCourseList'))
+    if codes:
+        return codes
+    return _course_codes_from_supported_options(resources.get('/course/vs/0') or {})
 
 
 def option_value(options, prefix):
@@ -187,29 +200,131 @@ def option_value(options, prefix):
     return None
 
 
-def replace_in_options(options, prefix, new_value):
-    return [f"{prefix}_{new_value}" if isinstance(o, str) and o.startswith(prefix + '_') else o
-            for o in options]
+def _course_codes_from_supported_options(course_rep):
+    """Fallback for an empty/missing editCourseList: derive the selectable
+    course list from /course/vs/0's own x.com.samsung.da.supportedOptions
+    instead (issue #1: some DA_WM_TP1/TP2-class boards populate the
+    /wm/editcourse/vs/0 href but never fill in editCourseList itself).
+
+    supportedOptions is a 1-hex-nibble header followed by one fixed-width
+    record per selectable course, self-indexed rather than positional --
+    the first byte of every record is that course's own hex code, just in
+    the firmware's own internal order, not editCourseList's. Confirmed
+    against six independent real-world washer/dryer/dishwasher dumps: every
+    one divides evenly into `header + N * K bytes` with fully unique first
+    bytes across all N records, at the record's true byte width. (What the
+    rest of each record encodes is still unconfirmed -- this only uses the
+    course-code byte.)
+
+    Two guards, deliberately conservative rather than guessing further: the
+    derived codes must (a) all be distinct -- a real course table, not
+    noise -- and (b) include whatever course is currently selected
+    (x.com.samsung.da.options' Course_<code> token), which must always be a
+    member of its own device's valid list. If no split satisfies both, this
+    returns [] rather than guess.
+
+    Among splits that satisfy both, the *smallest* passing K wins, rather
+    than requiring a single unambiguous one -- more than one K reliably
+    does pass on real data (e.g. the shipped dishwasher fixture: true
+    K=7 passes, but so do 10, 14, and 35, none of which are multiples of
+    7 -- position 0 always lands on the same real course code regardless
+    of K, which is enough on its own to satisfy the current-course guard
+    for several unrelated splits). Smallest-K-wins is a heuristic, not a
+    proof: it matches the confirmed answer on every one of six independent
+    real-world dumps this was checked against, but a coincidentally
+    unique, current-course-inclusive *smaller* K is not mathematically
+    impossible on some future device, and would be picked silently. Not
+    guarded against further here, since course tables are typically large
+    enough (double digits) that colliding by chance on both checks is
+    unlikely, and no device seen so far actually needs it.
+    """
+    raw = course_rep.get('x.com.samsung.da.supportedOptions')
+    hexstr = raw[0] if isinstance(raw, list) and raw else raw
+    if not isinstance(hexstr, str) or len(hexstr) < 3:
+        return []
+    body = hexstr[1:]
+    if len(body) % 2:
+        return []
+    total_bytes = len(body) // 2
+    current = option_value(course_rep.get('x.com.samsung.da.options'), 'Course')
+    for k in range(1, total_bytes + 1):
+        if total_bytes % k:
+            continue
+        n = total_bytes // k
+        if n < 2:
+            continue
+        firsts = [body[i * k * 2:i * k * 2 + 2] for i in range(n)]
+        if len(set(firsts)) != n:
+            continue
+        if current is not None and current not in firsts:
+            continue
+        return firsts
+    return []
+
+
+def option_write(prefix, new_value):
+    """A one-token x.com.samsung.da.options write -- see the module comment
+    above cycle_options for why this doesn't read/rewrite the whole array."""
+    return [f'{prefix}_{new_value}']
 
 
 def cycle_write(p, rep, href=None):
-    opts = list(rep.get('x.com.samsung.da.options') or [])
-    if not opts:
+    if not rep.get('x.com.samsung.da.options'):
         return None
     return ['course', 'vs', '0'], {
-        'x.com.samsung.da.options': replace_in_options(opts, 'Course', p),
+        'x.com.samsung.da.options': option_write('Course', p),
     }
 
 
-def cycle_select(*, translation_key, icon):
+def _table_id(resources, table_href):
+    rep = resources.get(table_href) or {}
+    return rep.get('x.com.samsung.da.st.courseTable')
+
+
+def cycle_select(*, translation_key, icon, table_href=None):
     """A 'Cycle' select over /course/vs/0, labelled from `translation_key`.
 
-    The caller supplies the family's translation key (washer_cycle /
-    dishwasher_cycle / dryer_cycle) and icon; the option list, current value,
-    and write path are all shared.
+    The option list, current value, and write path are all shared across
+    washer/dryer/dishwasher; only the translation is family- (and, for
+    washer/dryer, board-) specific.
+
+    table_href (washer/dryer only -- see washer.py/dryer.py's call sites)
+    suffixes translation_key with the device's own course-table id, read
+    from /st/washercourse/vs/0 or /st/dryercourse/vs/0's
+    x.com.samsung.da.st.courseTable (e.g. 'washer_cycle' + 'Table_02' ->
+    'washer_cycle_table_02'). An absent or unrecognized table id gets the
+    name-only ``cycle`` translation key while the raw course code remains
+    visible and writable.
+
+    This matters because course codes are NOT guaranteed consistent across
+    board generations sharing the same /course/vs/0 contract: every code in
+    washer_cycle_table_02 was confirmed against Table_02-reporting devices
+    (DA_WM_TP1/TP2 boards); FlexWash's older DA_WM_A51 board reports
+    Table_00 instead, so the same hex code could mean a different course
+    there for all we've verified. So a table-specific key is used only when
+    the shipped catalog actually has one; any other table (Table_00 today,
+    whatever ships next) falls back to the name-only ``cycle`` key, which
+    shows the raw course code rather than a label borrowed from another
+    board generation. Translating a new table is therefore a
+    translations-only change -- add the ``<family>_cycle_<table>`` entry and
+    this resolver picks it up.
+
+    Left at its default for dishwasher, which has no equivalent table-id
+    resource in any dump seen and no evidence its course codes vary by
+    table the way washer/dryer's do -- there's nothing to build a
+    table-specific key from.
     """
+    key = translation_key
+    if table_href is not None:
+        def key(resources):
+            table = _table_id(resources, table_href)
+            if not isinstance(table, str) or not table:
+                return 'cycle'
+            candidate = f'{translation_key}_{table.lower()}'
+            return candidate if has_entity_translation('select', candidate) else 'cycle'
+
     return SelectDesc(
-        key='cycle', name='Cycle', icon=icon, translation_key=translation_key,
+        key='cycle', icon=icon, translation_key=key,
         options=cycle_options,
         exists_fn=lambda rep, resources: bool(cycle_options(resources)),
         rep_fn=lambda rep: option_value(rep.get('x.com.samsung.da.options'), 'Course'),
@@ -217,6 +332,58 @@ def cycle_select(*, translation_key, icon):
     )
 
 
+# ---------------------------------------------------------------------------
+# Plain boolean toggles over /course/vs/0's options[] array: a
+# '<prefix>_On'/'<prefix>_Off' token, read-modify-written the same way as
+# the 'Course' token above. Shared by washer (bubble soak, pre-wash,
+# intensive -- issue #22) and dishwasher (storm wash, auto release dry) --
+# both families ride this exact contract, just with different prefixes and
+# different presence/validation needs on top.
+# ---------------------------------------------------------------------------
+
+
+def bool_option_write(prefix):
+    def write(p, rep, href=None):
+        if p not in ('On', 'Off'):
+            return None
+        if not rep.get('x.com.samsung.da.options'):
+            return None
+        return ['course', 'vs', '0'], {
+            'x.com.samsung.da.options': option_write(prefix, p),
+        }
+    return write
+
+
+def bool_option_value(prefix):
+    return lambda rep: option_value(rep.get('x.com.samsung.da.options'), prefix) == 'On'
+
+
+def bool_option_exists(prefix):
+    return lambda rep, resources: option_value(
+        rep.get('x.com.samsung.da.options'), prefix) is not None
+
+
+def bool_option_switch(key, icon, prefix, *, entity_category=None,
+                       gate_on_presence=False, validate_fn=None):
+    """A SwitchDesc over a '<prefix>_On'/'<prefix>_Off' options[] token.
+
+    gate_on_presence self-gates the entity off on models that never report
+    the token at all (washer's bubble soak/pre-wash/intensive); leave False
+    for a toggle every device in the family reports (dishwasher's storm
+    wash). validate_fn is passed straight through to SwitchDesc for callers
+    that need to reject a write against live device state (e.g. washer's
+    per-course availability check) -- this factory has no opinion on it and
+    building one, if needed, is the caller's job.
+    """
+    return SwitchDesc(
+        key=key, icon=icon, entity_category=entity_category,
+        exists_fn=bool_option_exists(prefix) if gate_on_presence else None,
+        rep_fn=bool_option_value(prefix),
+        write_fn=bool_option_write(prefix),
+        validate_fn=validate_fn,
+    )
+
+
 # ---------------------------------------------------------------------------
 # /wm/jobbeginingstatus/vs/0 -- the "why did the cycle not start" reason
 # (e.g. door open, no water). The vendor field is x.com.samsung.da.currentStatus
@@ -232,7 +399,6 @@ JOB_BEGINNING_STATUS = Capability(
     entities=(
         SensorDesc(key='job_beginning_status',
                    field='x.com.samsung.da.currentStatus',
-                   name='Job beginning status',
                    entity_category='diagnostic'),
     ),
 )

custom_components/localthings/registry/capabilities/operational.py

@@ -2,7 +2,8 @@
 
 Shared by dryer/dishwasher/oven/washer families.
 """
-from datetime import datetime, timezone, timedelta
+import math
+from datetime import datetime, timedelta, timezone
 
 from ..capability import Capability
 from ..entities import BinarySensorDesc, ButtonDesc, NumberDesc, SensorDesc
@@ -28,17 +29,41 @@ def _int(v):
         return None
 
 
+def _is_active(rep):
+    """Check if appliance is actively running and cycle is not finished."""
+    return (
+        _SAMSUNG_STATE_TO_OCF.get(rep.get('x.com.samsung.da.state')) == 'active'
+        and rep.get('x.com.samsung.da.progress') != 'Finish'
+    )
+
+
+def _remaining_seconds(raw):
+    """'HH:MM:SS' (or 'MM:SS') -> total seconds, or None."""
+    if not isinstance(raw, str):
+        return None
+    try:
+        parts = [int(p) for p in raw.split(':')]
+    except (ValueError, TypeError):
+        return None
+
+    if len(parts) == 3:
+        h, m, s = parts
+    elif len(parts) == 2:
+        h, m, s = 0, *parts
+    else:
+        return None
+
+    return h * 3600 + m * 60 + s
+
+
 def _delay_hours(v):
     """delayStartTime is a duration until the cycle starts, not a
     wall-clock time -- "01:00" means "1 hour from when you press start",
     not "1 AM"."""
-    if not v:
-        return 0.0
-    try:
-        h, m, s = v.split(':')
-        return int(h) + int(m) / 60 + int(s) / 3600
-    except Exception:
-        return None
+    total_seconds = _remaining_seconds(v)
+    if total_seconds is None:
+        return 0.0 if not v else None
+    return total_seconds / 3600.0
 
 
 def _format_delay(hours):
@@ -53,64 +78,93 @@ def _delay_field(rep):
     wall-clock time -- see _delay_hours). Write back whichever key the
     device itself is using; default to delayStartTime for hardware that
     reports neither yet (matches prior behavior)."""
-    return ('x.com.samsung.da.delayEndTime' if 'x.com.samsung.da.delayEndTime' in rep
-            else 'x.com.samsung.da.delayStartTime')
+    return (
+        'x.com.samsung.da.delayEndTime' if 'x.com.samsung.da.delayEndTime' in rep
+        else 'x.com.samsung.da.delayStartTime'
+    )
 
 
-def _finish_time(remaining_str):
-    if not remaining_str:
+def _finish_time(rep):
+    if not _is_active(rep):
         return None
-    try:
-        h, m, s = remaining_str.split(':')
-        total_s = int(h) * 3600 + int(m) * 60 + int(s)
-        if total_s == 0:
-            return None
-        return datetime.now(timezone.utc) + timedelta(seconds=total_s)
-    except Exception:
+    total_s = _remaining_seconds(rep.get('x.com.samsung.da.remainingTime'))
+    if not total_s:
         return None
+    return datetime.now(timezone.utc) + timedelta(seconds=total_s)
 
 
+def _completion_minutes(rep):
+    """Parse remaining time into minutes directly from device payload."""
+    raw = rep.get('x.com.samsung.da.remainingTime') or rep.get('remainingTime')
+    total_s = _remaining_seconds(raw)
+    if total_s is None:
+        return None
+    
+    # Avoid the firmware bug where it freezes at 1 minute post-cycle
+    if rep.get('x.com.samsung.da.progress') == 'Finish':
+        return 0
+        
+    return math.ceil(total_s / 60)
+
+
+# Shared by dryer/dishwasher/oven/washer -- oven.py imports this directly
+# rather than keeping its own copy, since both wrote the identical
+# state='Ready' RMW.
+STOP_BUTTON = ButtonDesc(key='stop', field='', payload='Ready',
+                         icon='mdi:stop',
+                         write_fn=lambda p, rep, href=None: (
+                             ['operational', 'state', 'vs', '0'],
+                             {'x.com.samsung.da.state': p}))
+
 OPERATIONAL_STATE = Capability(
     href='/operational/state/vs/0',
     poll_tier='hot',
     entities=(
         SensorDesc(key='machine_state', field='x.com.samsung.da.state',
-                   name='Machine state', device_class='enum',
+                   device_class='enum',
                    options=('idle', 'active', 'pause'),
                    translation_key='machine_state', value_fn=_to_ocf),
+                   
         # cycle_active is a bool derived from machine_state; used by the
         # adapter to gate oven writes (cycle_active_field='cycle_active').
         # Harmless for non-oven appliances — just an extra bool in state.
         # Samsung firmware keeps state='Run' after progress reaches 'Finish',
         # so we also gate on progress to avoid a stuck 'Running' indication.
+        # Named 'Running' in the catalog rather than 'Cycle active' -- this href (and the
+        # start/pause/stop buttons below) is shared across the dryer/
+        # dishwasher/oven/washer families, and 'cycle' is laundry-specific
+        # vocabulary that doesn't fit an oven's bake/roast/etc.
         BinarySensorDesc(key='cycle_active', device_class='running',
-                         name='Cycle active',
                          rep_fn=lambda rep: (
                              _SAMSUNG_STATE_TO_OCF.get(rep.get('x.com.samsung.da.state')) == 'active'
                              and rep.get('x.com.samsung.da.progress') != 'Finish'
                          )),
-        SensorDesc(key='progress', name='Progress', icon='mdi:progress-wrench',
+        SensorDesc(key='progress', icon='mdi:progress-wrench',
                    rep_fn=lambda rep: (
                        'Idle' if _SAMSUNG_STATE_TO_OCF.get(rep.get('x.com.samsung.da.state')) != 'active'
                        else _progress(rep.get('x.com.samsung.da.progress'))
                    )),
+                   
         SensorDesc(key='progress_percentage',
-                   name='Progress percent', unit='%', state_class='measurement',
+                   unit='%', state_class='measurement',
                    rep_fn=lambda rep: (
                        0 if _SAMSUNG_STATE_TO_OCF.get(rep.get('x.com.samsung.da.state')) != 'active'
                        else _int(rep.get('x.com.samsung.da.progressPercentage'))
                    )),
+                   
         # Only show finish time when machine is actively running. Samsung
         # firmware leaves a stale remainingTime after a cycle ends, and
         # freezes it at '00:01:00' when progress reaches 'Finish'.
         SensorDesc(key='finish_time', device_class='timestamp',
-                   name='Estimated finish',
-                   rep_fn=lambda rep: (
-                       None if _SAMSUNG_STATE_TO_OCF.get(rep.get('x.com.samsung.da.state')) != 'active'
-                            or rep.get('x.com.samsung.da.progress') == 'Finish'
-                       else _finish_time(rep.get('x.com.samsung.da.remainingTime'))
-                   )),
-        NumberDesc(key='delay_start_hours', name='Delay start', icon='mdi:timer-plus-outline',
+                   rep_fn=_finish_time),
+                   
+        SensorDesc(key='completion_minutes',
+                   icon='mdi:clock-outline', unit='min',
+                   device_class='duration', state_class='measurement',
+                   exists_fn=lambda rep, resources: _completion_minutes(rep) is not None,
+                   rep_fn=_completion_minutes),
+                   
+        NumberDesc(key='delay_start_hours', icon='mdi:timer-plus-outline',
                    device_class='duration', unit='h',
                    native_min=0, native_max=24, step=1,
                    rep_fn=lambda rep: _delay_hours(
@@ -119,20 +173,17 @@ OPERATIONAL_STATE = Capability(
                    write_fn=lambda p, rep, href=None: (
                        ['operational', 'state', 'vs', '0'],
                        {_delay_field(rep): _format_delay(p)})),
-        ButtonDesc(key='start', field='', name='Start cycle', payload='Run',
+        ButtonDesc(key='start', field='', payload='Run',
                    icon='mdi:play',
                    write_fn=lambda p, rep, href=None: (
                        ['operational', 'state', 'vs', '0'],
                        {'x.com.samsung.da.state': p})),
-        ButtonDesc(key='pause', field='', name='Pause cycle', payload='Pause',
+        ButtonDesc(key='pause', field='', payload='Pause',
                    icon='mdi:pause',
                    write_fn=lambda p, rep, href=None: (
                        ['operational', 'state', 'vs', '0'],
                        {'x.com.samsung.da.state': p})),
-        ButtonDesc(key='stop', field='', name='Stop cycle', payload='Ready',
-                   icon='mdi:stop',
-                   write_fn=lambda p, rep, href=None: (
-                       ['operational', 'state', 'vs', '0'],
-                       {'x.com.samsung.da.state': p})),
+                       
+        STOP_BUTTON,
     ),
 )

custom_components/localthings/registry/capabilities/oven.py

@@ -26,10 +26,10 @@ from datetime import datetime, timezone, timedelta
 
 from ..capability import Capability
 from ..entities import (
-    BinarySensorDesc, ButtonDesc, NumberDesc, SelectDesc, SensorDesc,
-    SwitchDesc,
+    BinarySensorDesc, NumberDesc, SelectDesc, SensorDesc, SwitchDesc,
 )
 from .common import normalize_temp_unit
+from .operational import STOP_BUTTON
 
 # ---------------------------------------------------------------------------
 # Constants
@@ -39,6 +39,15 @@ SETPOINT_MIN_C = 30
 SETPOINT_MAX_C = 270
 SETPOINT_STEP_C = 5
 
+# Verified against issue #44's range dump (NSI6DG9100SRAA, unit reported as
+# "Fahrenheit" on /temperatures/vs/0): Bake mode's modeSpec on /mode/vs/0
+# reports tempMinF/tempMaxF/tempIntervalF = 175/550/5. Kept as a separate
+# constant set rather than converted from the Celsius bounds above, which
+# are themselves unverified (no live dump; see module docstring).
+SETPOINT_MIN_F = 175
+SETPOINT_MAX_F = 550
+SETPOINT_STEP_F = 5
+
 # Mode options seen on NV7000BS-class. No dump exists so this list is inferred
 # from Samsung documentation and firmware observations. The firmware will
 # reject unknown modes; missing entries here are a coverage gap, not a bug.
@@ -113,10 +122,17 @@ def _option_value(options, prefix):
     return None
 
 
-def _replace_in_options(options, prefix, new_value):
-    """Return a new options list with the `<prefix>_*` slot replaced."""
-    return [f"{prefix}_{new_value}" if o.startswith(prefix + '_') else o
-            for o in options]
+def _option_write(prefix, new_value):
+    """A one-token x.com.samsung.da.options write, mirroring
+    laundry.option_write. NOT independently confirmed on an oven -- issue
+    #54 only confirmed prefix-merge-on-write for a washer's /course/vs/0.
+    This extrapolates that same vendor field/contract to the oven's
+    /mode/vs/0, on the assumption the firmware handles the array the same
+    way there. If that assumption is wrong for some oven, a device that
+    replaces the field outright instead of merging would drop every other
+    option in it (Sound/fastpreheat/etc.) on the next write -- revisit if a
+    real device report surfaces that."""
+    return [f'{prefix}_{new_value}']
 
 
 # ---------------------------------------------------------------------------
@@ -129,8 +145,9 @@ def _oven_setpoint_write(p, rep, href=None):
         temp = float(p)
     except (TypeError, ValueError):
         return None
-    temp_i = int(round(temp / SETPOINT_STEP_C) * SETPOINT_STEP_C)
-    if not (SETPOINT_MIN_C <= temp_i <= SETPOINT_MAX_C):
+    min_v, max_v, step_v = _setpoint_bounds(rep)
+    temp_i = int(round(temp / step_v) * step_v)
+    if not (min_v <= temp_i <= max_v):
         return None
     items = rep.get('x.com.samsung.da.items')
     if not items:
@@ -156,12 +173,6 @@ def _cook_time_write(p, rep, href=None):
     }
 
 
-def _stop_write(p, rep, href=None):
-    return ['operational', 'state', 'vs', '0'], {
-        'x.com.samsung.da.state': 'Ready',
-    }
-
-
 def _oven_mode_write(p, rep, href=None):
     if p not in _OVEN_MODES:
         return None
@@ -171,47 +182,41 @@ def _oven_mode_write(p, rep, href=None):
 def _lamp_write(p, rep, href=None):
     if p not in ('On', 'Off'):
         return None
-    opts = list(rep.get('x.com.samsung.da.options') or [])
-    if not opts:
+    if not rep.get('x.com.samsung.da.options'):
         return None
     return ['mode', 'vs', '0'], {
-        'x.com.samsung.da.options': _replace_in_options(opts, 'UpperLamp', p),
+        'x.com.samsung.da.options': _option_write('UpperLamp', p),
     }
 
 
 def _sound_write(p, rep, href=None):
     if p not in ('On', 'Off'):
         return None
-    opts = list(rep.get('x.com.samsung.da.options') or [])
-    if not opts:
+    if not rep.get('x.com.samsung.da.options'):
         return None
     return ['mode', 'vs', '0'], {
-        'x.com.samsung.da.options': _replace_in_options(opts, 'Sound', p),
+        'x.com.samsung.da.options': _option_write('Sound', p),
     }
 
 
 def _fastpreheat_write(p, rep, href=None):
     if p not in ('On', 'Off'):
         return None
-    opts = list(rep.get('x.com.samsung.da.options') or [])
-    if not opts:
+    if not rep.get('x.com.samsung.da.options'):
         return None
     return ['mode', 'vs', '0'], {
-        'x.com.samsung.da.options': _replace_in_options(opts, 'fastpreheat', p),
+        'x.com.samsung.da.options': _option_write('fastpreheat', p),
     }
 
 
 def _naturalsteam_write(p, rep, href=None):
     if p not in ('On', 'Off'):
         return None
-    opts = list(rep.get('x.com.samsung.da.options') or [])
-    if not opts:
+    if not rep.get('x.com.samsung.da.options'):
         return None
-    if not any(o.startswith('NaturalSteam_') for o in opts):
-        opts = opts + [f'NaturalSteam_{p}']
-    else:
-        opts = _replace_in_options(opts, 'NaturalSteam', p)
-    return ['mode', 'vs', '0'], {'x.com.samsung.da.options': opts}
+    return ['mode', 'vs', '0'], {
+        'x.com.samsung.da.options': _option_write('NaturalSteam', p),
+    }
 
 
 # ---------------------------------------------------------------------------
@@ -223,29 +228,28 @@ OVEN_OPERATIONAL_STATE = Capability(
     poll_tier='hot',
     entities=(
         SensorDesc(key='machine_state', field='x.com.samsung.da.state',
-                   name='Machine state', icon='mdi:stove',
+                   icon='mdi:stove',
                    device_class='enum', options=('idle', 'active', 'pause'),
                    translation_key='machine_state', value_fn=_to_ocf),
         BinarySensorDesc(key='cycle_active', field='x.com.samsung.da.state',
-                         name='Cycle active', device_class='running',
+                         device_class='running',
                          value_fn=lambda v: _SAMSUNG_STATE_TO_OCF.get(v) == 'active'),
         SensorDesc(key='progress_percentage',
                    field='x.com.samsung.da.progressPercentage',
-                   name='Progress percent', unit='%', state_class='measurement',
+                   unit='%', state_class='measurement',
                    value_fn=_int),
         SensorDesc(key='operation_time_minutes',
                    field='x.com.samsung.da.operationTime',
-                   name='Operation time (minutes)', unit='min',
+                   unit='min',
                    state_class='measurement', value_fn=_op_minutes),
         SensorDesc(key='finish_time', field='x.com.samsung.da.remainingTime',
-                   name='Estimated finish', device_class='timestamp',
+                   device_class='timestamp',
                    value_fn=_finish_time),
         NumberDesc(key='cook_time', field='x.com.samsung.da.operationTime',
-                   name='Cook time', unit='min', native_min=0, native_max=1439,
+                   unit='min', native_min=0, native_max=1439,
                    step=1.0, icon='mdi:timer', value_fn=_op_minutes,
                    write_fn=_cook_time_write),
-        ButtonDesc(key='stop', field='', name='Stop cycle', icon='mdi:stop',
-                   payload='Stop', write_fn=_stop_write),
+        STOP_BUTTON,
     ),
 )
 
@@ -254,7 +258,7 @@ OVEN_CAVITY = Capability(
     poll_tier='hot',
     entities=(
         SensorDesc(key='oven_state', field='x.com.samsung.da.state',
-                   name='Cavity state'),
+                   ),
     ),
 )
 
@@ -263,28 +267,41 @@ def _oven_temp_unit(rep):
     same aggregate `/temperatures/vs/0` items[] resource type, which on
     fridge hardware carries a per-item `x.com.samsung.da.unit` field
     ('Celsius'/'Fahrenheit') that was previously hardcoded away (issue #7).
-    No live oven dump has surfaced a non-Celsius reading yet, so this keeps
-    the verified '°C' default when the field is absent, but reads it live
-    if a device ever reports otherwise."""
+    Keeps the verified '°C' default when the field is absent (the original
+    NV7000BS-class dump this module was written against), but reads it live
+    -- issue #44's range dump is the first to report 'Fahrenheit' here."""
     items = rep.get('x.com.samsung.da.items') or []
     unit = items[0].get('x.com.samsung.da.unit') if items else None
     return normalize_temp_unit(unit, default='°C')
 
 
+def _setpoint_bounds(rep):
+    """(min, max, step) for the live unit -- see the SETPOINT_*_C/_F
+    constants above for provenance. Bounds must track the unit shown by
+    unit_fn (both read the same live rep), or the HA slider's range would
+    silently mismatch its own displayed unit."""
+    if _oven_temp_unit(rep) == '°F':
+        return SETPOINT_MIN_F, SETPOINT_MAX_F, SETPOINT_STEP_F
+    return SETPOINT_MIN_C, SETPOINT_MAX_C, SETPOINT_STEP_C
+
+
 OVEN_SETPOINT = Capability(
     href='/temperatures/vs/0',
     poll_tier='hot',
     entities=(
         # NumberDesc first — test_oven_setpoint_write_is_read_modify_write uses entities[0]
         NumberDesc(key='oven_setpoint', field='x.com.samsung.da.items',
-                   name='Setpoint', device_class='temperature', unit_fn=_oven_temp_unit,
+                   device_class='temperature', unit_fn=_oven_temp_unit,
                    native_min=float(SETPOINT_MIN_C), native_max=float(SETPOINT_MAX_C),
                    step=float(SETPOINT_STEP_C), icon='mdi:thermometer-chevron-up',
+                   native_min_fn=lambda rep: float(_setpoint_bounds(rep)[0]),
+                   native_max_fn=lambda rep: float(_setpoint_bounds(rep)[1]),
+                   step_fn=lambda rep: float(_setpoint_bounds(rep)[2]),
                    value_fn=lambda items: _int(
                        (items[0].get('x.com.samsung.da.desired') if items else None)),
                    write_fn=_oven_setpoint_write),
         SensorDesc(key='current_temp_c', field='x.com.samsung.da.items',
-                   name='Temperature', device_class='temperature',
+                   device_class='temperature',
                    state_class='measurement', unit_fn=_oven_temp_unit,
                    value_fn=lambda items: _int(
                        (items[0].get('x.com.samsung.da.current') if items else None))),
@@ -296,7 +313,7 @@ OVEN_DOOR = Capability(
     poll_tier='hot',
     entities=(
         BinarySensorDesc(key='door_open', field='x.com.samsung.da.items',
-                         name='Door', device_class='door',
+                         device_class='door',
                          value_fn=lambda items: (
                              items[0].get('x.com.samsung.da.openState') == 'Open'
                              if items else None)),
@@ -308,37 +325,44 @@ OVEN_CONNECTED = Capability(
     poll_tier='warm',
     entities=(
         BinarySensorDesc(key='cloud_connected', field='x.com.samsung.da.connected',
-                         name='Cloud connected', device_class='connectivity',
+                         device_class='connectivity',
                          entity_category='diagnostic',
                          value_fn=lambda v: v == 'On'),
     ),
 )
 
+# Static cavity capability metadata (count/type/supported features) -- no
+# per-cavity data varies at runtime on any dump seen so far (issue #44's
+# range: single cavity, no supportedFeatureList entries). Bound with no
+# entities purely for coverage; revisit if a multi-cavity dump surfaces
+# fields worth exposing.
+OVEN_SPEC = Capability(href='/oven/spec/vs/0')
+
 OVEN_MODE = Capability(
     href='/mode/vs/0',
     poll_tier='warm',
     entities=(
         # SelectDesc first — test_oven_mode_options_nonempty uses entities[0]
         SelectDesc(key='oven_mode', field='x.com.samsung.da.modes',
-                   name='Cooking mode', icon='mdi:tune',
+                   icon='mdi:tune',
                    options=_OVEN_MODES,
                    value_fn=lambda v: v[0] if v else None,
                    write_fn=_oven_mode_write),
         SwitchDesc(key='lamp', field='x.com.samsung.da.options',
-                   name='Lamp', icon='mdi:track-light',
+                   icon='mdi:track-light',
                    value_fn=lambda opts: _option_value(opts, 'UpperLamp') == 'On',
                    write_fn=_lamp_write),
         SwitchDesc(key='sound', field='x.com.samsung.da.options',
-                   name='Sound', icon='mdi:volume-high',
+                   icon='mdi:volume-high',
                    entity_category='config',
                    value_fn=lambda opts: _option_value(opts, 'Sound') == 'On',
                    write_fn=_sound_write),
         SwitchDesc(key='fast_preheat', field='x.com.samsung.da.options',
-                   name='Fast preheat', icon='mdi:fire',
+                   icon='mdi:fire',
                    value_fn=lambda opts: _option_value(opts, 'fastpreheat') == 'On',
                    write_fn=_fastpreheat_write),
         SwitchDesc(key='natural_steam', field='x.com.samsung.da.options',
-                   name='Natural steam', icon='mdi:kettle-steam',
+                   icon='mdi:kettle-steam',
                    value_fn=lambda opts: _option_value(opts, 'NaturalSteam') == 'On',
                    write_fn=_naturalsteam_write),
     ),

custom_components/localthings/registry/capabilities/range.py

@@ -0,0 +1,135 @@
+"""Capabilities for the cooktop half of range/combo appliances (issue #44,
+model TP1X_DA-KS-RANGE-0102X).
+
+Not to be confused with PR #23's registry/capabilities/cooktop.py, which
+covers an unrelated standalone-cooktop product (NA9300K-class) that encodes
+burner state as strings inside /mode/vs/0's options array instead of the
+structured /cooktop/status/vs/0 resource this module reads -- two different
+OCF surfaces that happen to share the English word "cooktop".
+
+Unlike the rest of the OCF surface, these hrefs use plain camelCase field
+names (no `x.com.samsung.da.` prefix) -- `/cooktop/status/vs/0` already
+looks like a vendor resource migrated onto OCF-standard-shaped field naming.
+
+`/cooktop/status/vs/0` carries every burner's live state in one `burnerList`
+array (indexed by `burnerNumber`, not by a separate href per burner like
+fridge ice makers), so per-burner entities are hardcoded up to MAX_BURNERS
+and gated by exists_fn against whichever indices the device actually
+reports -- harmless over-declaration, per common.py's UNIVERSAL note, since
+an index absent from burnerList just never binds.
+
+Write surfaces here are unproven (no live device to verify against, same
+caveat as oven.py's RMW writes) -- power level uses the same read-modify-
+write pattern already proven safe elsewhere in this codebase (oven setpoint,
+icemaker toggles).
+"""
+from ..capability import Capability
+from ..entities import BinarySensorDesc, SelectDesc, SensorDesc
+
+# Observed as high as 4 (this issue's dump); user-reported hardware with 5
+# burners exists. Kept a little above both since exists_fn gates unused
+# slots out -- see module docstring.
+MAX_BURNERS = 6
+
+
+def _burner(burner_list, i):
+    for b in (burner_list or []):
+        if b.get('burnerNumber') == i:
+            return b
+    return None
+
+
+def _burner_exists(i):
+    return lambda rep, resources: _burner(rep.get('burnerList'), i) is not None
+
+
+def _burner_field_fn(i, field):
+    return lambda burner_list: (_burner(burner_list, i) or {}).get(field)
+
+
+def _burner_hot_surface_fn(i):
+    get_state = _burner_field_fn(i, 'hotSurfaceState')
+    return lambda burner_list: get_state(burner_list) not in (None, 'normal')
+
+
+def _power_level_options(resources):
+    spec = resources.get('/cooktop/spec/vs/0') or {}
+    return list(spec.get('supportedPowerLevelList') or [])
+
+
+def _burner_power_level_write(i):
+    def write(p, rep, href=None):
+        burner_list = rep.get('burnerList')
+        if not burner_list:
+            return None
+        new_list = []
+        found = False
+        for b in burner_list:
+            if b.get('burnerNumber') == i:
+                b = dict(b)
+                b['powerLevel'] = p
+                found = True
+            new_list.append(b)
+        if not found:
+            return None
+        return ['cooktop', 'status', 'vs', '0'], {'burnerList': new_list}
+    return write
+
+
+def _burner_entities(i):
+    exists = _burner_exists(i)
+    n = i + 1
+    return (
+        SelectDesc(key=f'burner_{i}_power_level', field='burnerList',
+                   icon='mdi:knob',
+                   translation_key='range_burner_power_level',
+                   translation_placeholders={'number': str(n)},
+                   options=_power_level_options,
+                   exists_fn=exists,
+                   value_fn=_burner_field_fn(i, 'powerLevel'),
+                   write_fn=_burner_power_level_write(i)),
+        SensorDesc(key=f'burner_{i}_state', field='burnerList',
+                   icon='mdi:stove',
+                   translation_key='burner_state',
+                   translation_placeholders={'number': str(n)},
+                   exists_fn=exists,
+                   value_fn=_burner_field_fn(i, 'operationState')),
+        BinarySensorDesc(key=f'burner_{i}_hot_surface', field='burnerList',
+                         device_class='heat',
+                         translation_key='burner_hot_surface',
+                         translation_placeholders={'number': str(n)},
+                         exists_fn=exists,
+                         value_fn=_burner_hot_surface_fn(i)),
+    )
+
+
+COOKTOP_STATUS = Capability(
+    href='/cooktop/status/vs/0',
+    poll_tier='hot',
+    entities=(
+        SensorDesc(key='cooktop_state', field='operationState',
+                   icon='mdi:pot-steam'),
+        *[e for i in range(MAX_BURNERS) for e in _burner_entities(i)],
+    ),
+)
+
+# Static burner-count/power-level-list metadata, read directly by
+# COOKTOP_STATUS's power-level select (options=_power_level_options) rather
+# than exposed through its own entity -- same "informs another capability,
+# no entity of its own" pattern as /wm/editcourse/vs/0 (ignored.py).
+COOKTOP_SPEC = Capability(href='/cooktop/spec/vs/0')
+
+# settingTime (seconds) is the hot-surface auto-shutoff timer's configured
+# duration (1200s = 20 min in issue #44's dump); state on/off is whether the
+# feature itself is enabled -- not a live "surface is hot right now" alert
+# (that's COOKTOP_STATUS's per-burner hot_surface). No write contract
+# verified, so read-only for now.
+COOKTOP_SAFETY = Capability(
+    href='/cooktop/settings/status/vs/0',
+    poll_tier='warm',
+    entities=(
+        BinarySensorDesc(key='cooktop_safety_shutoff_enabled', field='safetyAlert',
+                         entity_category='config',
+                         value_fn=lambda v: (v or {}).get('state') == 'on'),
+    ),
+)

custom_components/localthings/registry/capabilities/range_hood.py

@@ -0,0 +1,276 @@
+"""Capabilities for Samsung AHD-WW-TP1-22 range hoods.
+
+The verified device exposes its fan, two-level work lamp, washable-filter
+status, and particulate sensors as distinct local OCF resources.  Fan power
+and speed are combined into one HA fan entity by ``fan.py``; lamp power and
+brightness remain separate controls because the device advertises them as two
+independent fields.
+"""
+
+from datetime import datetime, timezone
+
+from ..capability import Capability
+from ..entities import (
+    BinarySensorDesc,
+    FanDesc,
+    SelectDesc,
+    SensorDesc,
+    SwitchDesc,
+)
+from .common import int_or_none, sensor_item_value
+
+
+def _timestamp(value):
+    try:
+        return datetime.fromtimestamp(float(value), tz=timezone.utc)
+    except (TypeError, ValueError, OSError):
+        return None
+
+
+def _active_alarm_codes(items):
+    """Discard the hood firmware's retained/deleted ``ErrorCode_OFF`` row.
+
+    Unlike ``common._alarm_codes``, the hood retains a deleted alarm row in
+    its live representation, so this family-specific helper also checks state.
+    """
+    codes = []
+    for item in items or ():
+        if not isinstance(item, dict):
+            continue
+        if str(item.get('x.com.samsung.da.state', '')).lower() == 'deleted':
+            continue
+        code = item.get('x.com.samsung.da.code')
+        if code and str(code).lower() != 'errorcode_off':
+            codes.append(code)
+    return ', '.join(codes) if codes else 'none'
+
+
+HOOD_ALARMS = Capability(
+    href='/alarms/vs/0',
+    poll_tier='hot',
+    entities=(
+        SensorDesc(
+            key='alarm_code',
+            field='x.com.samsung.da.items',
+            icon='mdi:alert',
+            entity_category='diagnostic',
+            value_fn=_active_alarm_codes,
+        ),
+    ),
+)
+
+
+def _hood_fan_write(payload, rep, href=None):
+    kind, value, *args = payload
+    if kind == 'power':
+        power_href = args[0] if args else '/power/0'
+        if power_href == '/power/0':
+            return ['power', '0'], {'value': bool(value)}
+        if power_href == '/power/vs/0':
+            return ['power', 'vs', '0'], {
+                'x.com.samsung.da.power': 'On' if value else 'Off',
+            }
+        return None
+    if kind == 'speed':
+        value = str(value)
+        supported = [
+            str(code)
+            for code in rep.get('x.com.samsung.da.hood.supportedFanSpeed', ())
+        ]
+        if value not in supported:
+            return None
+        return ['hood', 'fanspeed', 'vs', '0'], {
+            'x.com.samsung.da.hood.fanSpeed': value,
+        }
+    return None
+
+
+HOOD_FAN = Capability(
+    href='/hood/fanspeed/vs/0',
+    poll_tier='hot',
+    entities=(
+        FanDesc(
+            key='fan',
+            field='x.com.samsung.da.hood.fanSpeed',
+            write_fn=_hood_fan_write,
+        ),
+        BinarySensorDesc(
+            key='automatic_operation',
+            field='x.com.samsung.da.hood.autoOperation',
+            icon='mdi:fan-auto',
+            entity_category='diagnostic',
+            value_fn=lambda value: str(value).lower() == 'on',
+        ),
+    ),
+)
+
+
+def _lamp_level_write(value, rep, href=None):
+    code = str(value)
+    supported = [str(level) for level in rep.get('x.com.samsung.lamp.range', ())]
+    if code not in supported:
+        return None
+    return ['hood', 'lamp', 'vs', '0'], {
+        'x.com.samsung.lamp.current': code,
+    }
+
+
+HOOD_LAMP = Capability(
+    href='/hood/lamp/vs/0',
+    poll_tier='hot',
+    entities=(
+        SwitchDesc(
+            key='lamp',
+            field='x.com.samsung.lamp.power',
+            icon='mdi:range-hood',
+            value_fn=lambda value: str(value).lower() == 'on',
+            write_fn=lambda payload, rep, href=None: (
+                ['hood', 'lamp', 'vs', '0'],
+                {'x.com.samsung.lamp.power': 'On' if payload == 'On' else 'Off'},
+            ),
+        ),
+        SelectDesc(
+            key='lamp_brightness',
+            field='x.com.samsung.lamp.current',
+            icon='mdi:brightness-6',
+            translation_key='range_hood_lamp_brightness',
+            options_field='x.com.samsung.lamp.range',
+            write_fn=_lamp_level_write,
+        ),
+    ),
+)
+
+
+HOOD_FILTER = Capability(
+    href='/filter/hoodfilter/vs/0',
+    poll_tier='cold',
+    entities=(
+        SensorDesc(
+            key='hood_filter_usage',
+            field='x.com.samsung.da.filterUsage',
+            unit='%',
+            state_class='measurement',
+            icon='mdi:air-filter',
+            entity_category='diagnostic',
+            value_fn=int_or_none,
+        ),
+        SensorDesc(
+            key='hood_filter_status',
+            field='x.com.samsung.da.filterStatus',
+            icon='mdi:air-filter',
+            entity_category='diagnostic',
+            device_class='enum',
+            options=('normal', 'wash', 'replace'),
+            translation_key='filter_status',
+            value_fn=lambda value: (
+                value.lower() if isinstance(value, str) else value
+            ),
+        ),
+        SensorDesc(
+            key='hood_filter_capacity',
+            field='x.com.samsung.da.filterCapacity',
+            unit='h',
+            icon='mdi:timer-outline',
+            entity_category='diagnostic',
+            enabled_default=False,
+            value_fn=int_or_none,
+        ),
+    ),
+)
+
+
+AIR_QUALITY = Capability(
+    href='/sensors/vs/0',
+    poll_tier='warm',
+    entities=(
+        SensorDesc(
+            key='clean_level',
+            field='x.com.samsung.da.items',
+            icon='mdi:air-filter',
+            value_fn=lambda items: sensor_item_value(items, 'CleanLevel'),
+        ),
+        SensorDesc(
+            key='dust',
+            field='x.com.samsung.da.items',
+            value_fn=lambda items: sensor_item_value(items, 'Dust'),
+        ),
+        SensorDesc(
+            key='fine_dust',
+            field='x.com.samsung.da.items',
+            value_fn=lambda items: sensor_item_value(items, 'FineDust'),
+        ),
+        SensorDesc(
+            key='super_fine_dust',
+            field='x.com.samsung.da.items',
+            value_fn=lambda items: sensor_item_value(items, 'SuperFineDust'),
+        ),
+    ),
+)
+
+
+AIR_LEVEL_CHECK = Capability(
+    href='/airlevelcheck/vs/0',
+    poll_tier='warm',
+    entities=(
+        BinarySensorDesc(
+            key='periodic_air_sensing',
+            field='x.com.samsung.da.periodicSensingActivationState',
+            icon='mdi:radar',
+            entity_category='diagnostic',
+            value_fn=lambda value: str(value).lower() == 'on',
+        ),
+        SensorDesc(
+            key='air_sensing_state',
+            field='x.com.samsung.da.sensingState',
+            icon='mdi:radar',
+            entity_category='diagnostic',
+        ),
+        SensorDesc(
+            key='last_air_sensing_time',
+            field='x.com.samsung.da.lastSensingTime',
+            device_class='timestamp',
+            entity_category='diagnostic',
+            value_fn=_timestamp,
+        ),
+        SensorDesc(
+            key='last_air_sensing_level',
+            field='x.com.samsung.da.lastSensingLevel',
+            icon='mdi:air-filter',
+            entity_category='diagnostic',
+        ),
+        SensorDesc(
+            key='automatic_ventilation_state',
+            field='x.com.samsung.da.autoExeState',
+            icon='mdi:fan-auto',
+            entity_category='diagnostic',
+        ),
+    ),
+)
+
+
+AUTO_VENTILATION = Capability(
+    href='/autoventilation/vs/0',
+    poll_tier='warm',
+    entities=(
+        SensorDesc(
+            key='auto_ventilation_action',
+            field='action',
+            icon='mdi:fan-auto',
+        ),
+    ),
+)
+
+
+# Resource plumbing and opaque feature-negotiation fields that are specific to
+# this family.  Bare capabilities mark them covered without creating entities.
+COVERAGE = [
+    Capability(href=href)
+    for href in (
+        '/power/0',
+        '/power/vs/0',
+        '/mode/vs/0',
+        '/personality/presence/vs/0',
+        '/availablecontrolsets/vs/0',
+        '/da/softreset/vs/0',
+    )
+]

custom_components/localthings/registry/capabilities/washer.py

@@ -17,11 +17,14 @@ from datetime import datetime, timezone
 
 from ..capability import Capability
 from ..entities import BinarySensorDesc, SelectDesc, SensorDesc
-from .laundry import cycle_select, hex_pairs, option_value, replace_in_options
+from .laundry import (
+    bool_option_exists, bool_option_switch, cycle_options, cycle_select, hex_pairs, option_value,
+    option_write,
+)
 
 # ---------------------------------------------------------------------------
-# Course_XX hex codes. The 23 codes named in strings.json/translations
-# under entity.select.washer_cycle.state.<id, lowercased> were captured
+# Course_XX hex codes. 23 of the codes named in translations/en.json
+# under entity.select.washer_cycle_table_02.state.<id, lowercased> were captured
 # from a live WW90DG6U25LEU4's x.com.samsung.da.editCourseList
 # (EditCourseList_1C1D211B1E29243328262722202325322F2E30662D8F96), matched
 # positionally against a Slovak-UI user's screenshots of their app's course
@@ -35,6 +38,13 @@ from .laundry import cycle_select, hex_pairs, option_value, replace_in_options
 # you'd expect to be pinned (default cycle + maintenance cycle),
 # corroborating the positional match.
 #
+# A further 5 codes -- '36' Wash+Dry, '37' Air Wash, '38' Cotton Dry,
+# '39' Synthetics Dry, and a second, distinct '1F' Intense Cold (not the
+# same code as '8F' above) -- came from a WD90T654DBN/S1 washer/dryer
+# combo's editCourseList and were named from that user's app screenshot
+# (issue #22). Combo units carry their own course set, so these codes
+# don't imply anything about '1F' on a plain washer.
+#
 # No static fallback list of those codes is kept here, deliberately: other
 # washer models have a different actual course set (a second dump's active
 # course, '65', isn't even in the list above; models with 'AI Wash'/'Mixed
@@ -65,19 +75,19 @@ WASHER_SETTINGS = Capability(
     href='/washer/vs/0',
     entities=(
         SelectDesc(key='wash_temperature', field='x.com.samsung.da.waterTemperature',
-                   name='Wash temperature', icon='mdi:thermometer-water',
+                   icon='mdi:thermometer-water',
                    entity_category='config',
                    options_field='x.com.samsung.da.supportedWaterTemperature',
                    write_fn=lambda p, rep, href=None: (
                        ['washer', 'vs', '0'], {'x.com.samsung.da.waterTemperature': p})),
         SelectDesc(key='spin_speed', field='x.com.samsung.da.spinLevel',
-                   name='Spin speed', icon='mdi:sync',
+                   icon='mdi:sync',
                    entity_category='config',
                    options_field='x.com.samsung.da.supportedSpinLevel',
                    write_fn=lambda p, rep, href=None: (
                        ['washer', 'vs', '0'], {'x.com.samsung.da.spinLevel': p})),
         SelectDesc(key='rinse_cycles', field='x.com.samsung.da.rinseCycles',
-                   name='Rinse cycles', icon='mdi:water-sync',
+                   icon='mdi:water-sync',
                    entity_category='config',
                    options_field='x.com.samsung.da.supportedRinseCycles',
                    write_fn=lambda p, rep, href=None: (
@@ -87,7 +97,7 @@ WASHER_SETTINGS = Capability(
         # #22. Self-gates off on plain washers, which never report
         # supportedDryLevel.
         SelectDesc(key='dry_level', field='x.com.samsung.da.dryLevel',
-                   name='Dry level', icon='mdi:tumble-dryer',
+                   icon='mdi:tumble-dryer',
                    entity_category='config',
                    translation_key='washer_dry_level',
                    options_field='x.com.samsung.da.supportedDryLevel',
@@ -147,8 +157,8 @@ def _drum_clean_last_cleaned(rep):
 # valid raw codes for its field, same hex-pair shape as EditCourseList.
 # '<Prefix>Alarm_<On/Off>' is a low-reservoir warning flag.
 #
-# Label mapping (entity.select.washer_dosing_quantity/washer_detergent_
-# water_hardness/washer_softener_concentration in strings.json) is an
+# Label mapping (entity.select.{detergent,softener}_quantity /
+# detergent_water_hardness / softener_concentration in translations/en.json) is an
 # assumed, not cross-device-verified, reading of the single issue #9 dump +
 # screenshots: LevelCtrl's 4 codes as None/Low/Medium/High (00 has no
 # on-screen equivalent -- the app's Quantité picker only offers
@@ -205,8 +215,7 @@ def _dosing_level(prefix):
 
 def _level_write(prefix):
     def write(p, rep, href=None):
-        opts = list(rep.get('x.com.samsung.da.options') or [])
-        if not opts:
+        if not rep.get('x.com.samsung.da.options'):
             return None
         # `p` is the zero-padded supported code the UI selected (e.g. '03');
         # the device stores the level un-padded (e.g. '3'), matching how it
@@ -216,7 +225,7 @@ def _level_write(prefix):
         except (TypeError, ValueError):
             native = p
         return ['course', 'vs', '0'], {
-            'x.com.samsung.da.options': replace_in_options(opts, prefix, native),
+            'x.com.samsung.da.options': option_write(prefix, native),
         }
     return write
 
@@ -226,66 +235,120 @@ def _dosing_low(prefix):
         rep.get('x.com.samsung.da.options'), prefix) not in (None, 'Off')
 
 
-def _dosing_alarm_exists(prefix):
-    return lambda rep, resources: option_value(
-        rep.get('x.com.samsung.da.options'), prefix) is not None
+# Bubble soak / pre-wash / intensive-wash toggles, from the same options[]
+# array (issue #22 follow-up on a WD90T654DBN/S1 combo). Each rides as a
+# plain '<Prefix>_On'/'<Prefix>_Off' token, confirmed by a dump taken with
+# Bubble Soak switched on in the app (BubbleSoak_On) -- the same On/Off shape
+# already used by AiOption and KidsLockBypass in this same array, so
+# PreWashSetting/IntensiveSetting are assumed to follow suit.
+#
+# Each also has a differently-named hex-pair availability field that lines up
+# positionally with editCourseList: BubbleSoakSet, PreWashAvailableSet,
+# IntensiveAvailableSet. On the reporter's dump (course '30' at position 1 of
+# 24), all three read 'F0' at that position and the toggle was writable --
+# and the same dump's earlier state (course '1C' at position 0, 'BubbleSoak
+# Off') decodes to '00' for that course, matching the app graying the
+# control out there. 'F0'/'00' is treated as available/unavailable on that
+# evidence. exists_fn (device-level presence) still only runs once, against
+# the setup-time snapshot, so it isn't a fit for this per-course check --
+# validate_fn runs on every write attempt instead (dispatched from
+# coordinator.async_send_command, ahead of write_fn), rejecting an on-write
+# for a course whose byte isn't 'F0' with a user-facing error rather than
+# silently no-opping against the device. The read/write/presence machinery
+# itself is laundry.bool_option_switch, shared with dishwasher's storm-wash/
+# auto-release-dry toggles -- only this per-course gating is washer-only, so
+# it stays here rather than in laundry.py (see laundry.bool_option_switch's
+# docstring: it takes a prebuilt validate_fn and has no opinion on it).
+def _bool_option_switch(key, icon, prefix, availability_field):
+    def validate(p, rep, resources):
+        """Reject turning on when the selected course's byte in
+        `availability_field` isn't 'F0'. Turning off is never blocked. Falls
+        back to allowing the write whenever the availability data can't be
+        resolved (unrecognized course, missing/mismatched-length bitmap)
+        rather than guessing -- a false rejection is worse than an
+        occasional no-op write."""
+        if p != 'On':
+            return None
+        opts = rep.get('x.com.samsung.da.options') or []
+        current = option_value(opts, 'Course')
+        courses = cycle_options(resources)
+        if not current or current not in courses:
+            return None
+        raw = option_value(opts, availability_field)
+        if raw is None:
+            return None
+        pairs = hex_pairs(raw)
+        if len(pairs) != len(courses):
+            return None
+        if pairs[courses.index(current)] != 'F0':
+            return f"{key}_unavailable_for_cycle"
+        return None
+
+    return bool_option_switch(
+        key, icon, prefix,
+        entity_category='config', gate_on_presence=True, validate_fn=validate)
 
 
 WASHER_COURSE = Capability(
     href='/course/vs/0',
     entities=(
-        cycle_select(translation_key='washer_cycle', icon='mdi:washing-machine'),
-        SensorDesc(key='drum_clean_cycles_remaining', name='Drum clean due in',
-                   icon='mdi:washing-machine-alert', unit='cycles',
+        cycle_select(translation_key='washer_cycle', icon='mdi:washing-machine',
+                     table_href='/st/washercourse/vs/0'),
+        SensorDesc(key='drum_clean_cycles_remaining', unit='cycles',
+                   icon='mdi:washing-machine-alert',
                    state_class='measurement',
                    exists_fn=lambda rep, resources: _drum_clean_cycles_remaining(rep) is not None,
                    rep_fn=_drum_clean_cycles_remaining),
-        SensorDesc(key='drum_clean_last_cleaned', name='Drum last cleaned',
-                   icon='mdi:calendar-clock', device_class='timestamp',
+        SensorDesc(key='drum_clean_last_cleaned', device_class='timestamp',
+                   icon='mdi:calendar-clock',
                    entity_category='diagnostic',
                    exists_fn=lambda rep, resources: _drum_clean_last_cleaned(rep) is not None,
                    rep_fn=_drum_clean_last_cleaned),
-        SelectDesc(key='detergent_quantity', name='Detergent quantity', icon='mdi:cup-water',
-                   translation_key='washer_dosing_quantity',
+        SelectDesc(key='detergent_quantity', icon='mdi:cup-water',
+                   translation_key='detergent_quantity',
                    entity_category='config',
                    options=_level_options('DetergentLevelCtrl'),
                    exists_fn=lambda rep, resources: bool(
                        _level_options('DetergentLevelCtrl')(resources)),
                    rep_fn=_dosing_level('DetergentLevelCtrl'),
                    write_fn=_level_write('DetergentLevelCtrl')),
-        SelectDesc(key='detergent_water_hardness', name='Detergent water hardness',
-                   icon='mdi:water-opacity',
-                   translation_key='washer_detergent_water_hardness',
+        SelectDesc(key='detergent_water_hardness', icon='mdi:water-opacity',
+                   translation_key='detergent_water_hardness',
                    entity_category='config',
                    options=_level_options('DetergentLevel2Ctrl'),
                    exists_fn=lambda rep, resources: bool(
                        _level_options('DetergentLevel2Ctrl')(resources)),
                    rep_fn=_dosing_level('DetergentLevel2Ctrl'),
                    write_fn=_level_write('DetergentLevel2Ctrl')),
-        SelectDesc(key='softener_quantity', name='Softener quantity', icon='mdi:flask-outline',
-                   translation_key='washer_dosing_quantity',
+        SelectDesc(key='softener_quantity', icon='mdi:flask-outline',
+                   translation_key='softener_quantity',
                    entity_category='config',
                    options=_level_options('SoftenerLevelCtrl'),
                    exists_fn=lambda rep, resources: bool(
                        _level_options('SoftenerLevelCtrl')(resources)),
                    rep_fn=_dosing_level('SoftenerLevelCtrl'),
                    write_fn=_level_write('SoftenerLevelCtrl')),
-        SelectDesc(key='softener_concentration', name='Softener concentration',
-                   icon='mdi:flask-plus-outline',
-                   translation_key='washer_softener_concentration',
+        SelectDesc(key='softener_concentration', icon='mdi:flask-plus-outline',
+                   translation_key='softener_concentration',
                    entity_category='config',
                    options=_level_options('SoftenerLevel2Ctrl'),
                    exists_fn=lambda rep, resources: bool(
                        _level_options('SoftenerLevel2Ctrl')(resources)),
                    rep_fn=_dosing_level('SoftenerLevel2Ctrl'),
                    write_fn=_level_write('SoftenerLevel2Ctrl')),
-        BinarySensorDesc(key='detergent_low', name='Detergent low',
-                         icon='mdi:alert-circle-outline', device_class='problem',
-                         exists_fn=_dosing_alarm_exists('DetergentAlarm'),
+        BinarySensorDesc(key='detergent_low', device_class='problem',
+                         icon='mdi:alert-circle-outline',
+                         exists_fn=bool_option_exists('DetergentAlarm'),
                          rep_fn=_dosing_low('DetergentAlarm')),
-        BinarySensorDesc(key='softener_low', name='Softener low',
-                         icon='mdi:alert-circle-outline', device_class='problem',
-                         exists_fn=_dosing_alarm_exists('SoftenerAlarm'),
+        BinarySensorDesc(key='softener_low', device_class='problem',
+                         icon='mdi:alert-circle-outline',
+                         exists_fn=bool_option_exists('SoftenerAlarm'),
                          rep_fn=_dosing_low('SoftenerAlarm')),
+        _bool_option_switch('bubble_soak', 'mdi:chart-bubble',
+                             'BubbleSoak', 'BubbleSoakSet'),
+        _bool_option_switch('pre_wash', 'mdi:washing-machine',
+                             'PreWashSetting', 'PreWashAvailableSet'),
+        _bool_option_switch('intensive', 'mdi:washing-machine',
+                             'IntensiveSetting', 'IntensiveAvailableSet'),
     ),
 )

custom_components/localthings/registry/capability.py

@@ -15,6 +15,11 @@ class Capability:
     rt_filter: Optional[str] = None          # bind only if rt_filter in rep.get('rt', ())
     href_prefix: Optional[str] = None        # pattern caps only: bind only if href starts with this
     strip_prefix_in_key: bool = False         # strip href_prefix segs before building key_override
+    # Rep field holding this instance's device-given name (e.g. an ice
+    # maker's "CUBED_ICE"/"ICE_BITES"), normalized and used as the display
+    # name prefix in place of the href-derived instance label. Does not
+    # affect key_override/unique_id -- only what's shown in the UI.
+    name_field: Optional[str] = None
     match_fn: Optional[Callable[[dict, dict], bool]] = None  # match_fn(rep, resources) -> bool
     # Rare optional hook — only operational-state-style resources use this.
     on_observation: Optional[Callable[[dict, dict], None]] = None

custom_components/localthings/registry/discovery.py

@@ -27,6 +27,25 @@ class BoundEntity:
     desc: SamsungEntityDescription
     instance: str = ''
     key_override: Optional[str] = None
+    instance_name: Optional[str] = None
+
+
+def _snake_to_title(s: str) -> str:
+    """'CUBED_ICE'/'cubed_ice' -> 'Cubed Ice'. Shared with entity.py's
+    _derive_name, which applies the same transform to an href-derived key."""
+    return s.replace('_', ' ').title()
+
+
+def _instance_name(cap: Capability, rep: dict) -> Optional[str]:
+    """Normalize `cap.name_field`'s raw value ("CUBED_ICE" -> "Cubed Ice")
+    for use as a display-name prefix, or None if the cap doesn't declare
+    one or the device didn't report it."""
+    if not cap.name_field:
+        return None
+    raw = rep.get(cap.name_field)
+    if not isinstance(raw, str) or not raw:
+        return None
+    return _snake_to_title(raw)
 
 
 def instance_suffix(href: str) -> str:
@@ -37,6 +56,18 @@ def instance_suffix(href: str) -> str:
     return ''
 
 
+def _bind(cap: Capability, href: str, inst: str, inst_name: Optional[str],
+          key_prefix: Optional[str] = None) -> list[BoundEntity]:
+    """Build one BoundEntity per entity on `cap`, sharing the instance/
+    key-prefix/instance-name computed once by the caller."""
+    return [
+        BoundEntity(href=href, capability=cap, desc=desc, instance=inst,
+                    key_override=f'{key_prefix}_{desc.key}' if key_prefix else None,
+                    instance_name=inst_name)
+        for desc in cap.entities
+    ]
+
+
 def discover(
     resources: dict[str, dict],
     registry: dict[str, list[Capability]],
@@ -58,9 +89,7 @@ def discover(
             if cap.match_fn is not None and not cap.match_fn(rep, resources):
                 continue
             inst = instance_suffix(href)
-            for desc in cap.entities:
-                out.append(BoundEntity(href=href, capability=cap,
-                                       desc=desc, instance=inst))
+            out.extend(_bind(cap, href, inst, _instance_name(cap, rep)))
             matched = True
 
         if matched:
@@ -78,10 +107,7 @@ def discover(
             # Auto-derive key prefix from href segments (skip digits and 'vs')
             src = href[len(cap.href_prefix):] if (cap.strip_prefix_in_key and cap.href_prefix) else href
             segs = [s for s in src.strip('/').split('/') if s and not s.isdigit() and s != 'vs']
-            for desc in cap.entities:
-                key_override = '_'.join(segs) + '_' + desc.key
-                out.append(BoundEntity(href=href, capability=cap, desc=desc,
-                                       instance=inst, key_override=key_override))
+            out.extend(_bind(cap, href, inst, _instance_name(cap, rep), '_'.join(segs)))
             matched = True
             break
 

custom_components/localthings/registry/entities.py

@@ -2,14 +2,21 @@
 
 Frozen dataclasses so the future native HA component can consume them as
 EntityDescription subclasses unchanged. Read transforms live in value_fn;
-presence gating in exists_fn; write logic in write_fn on command platforms.
+presence gating in exists_fn; write logic in write_fn on command platforms;
+pre-write rejection (surfaced to the user, not just logged) in validate_fn
+where a description declares one.
 """
 from __future__ import annotations
 
-from dataclasses import dataclass, field
-from typing import Any, Callable, Optional
+from dataclasses import dataclass
+from typing import Any, Callable, Mapping, Optional
 
 WriteFn = Optional[Callable[[Any, dict], "tuple[list[str], dict] | None"]]
+# (payload, rep, resources) -> a translation key, or None to allow the
+# write. resources is the coordinator's full href->rep snapshot, for the same
+# cross-resource lookups exists_fn needs (e.g. reading a sibling href's live
+# option list).
+ValidateFn = Optional[Callable[[Any, dict, dict], "str | None"]]
 
 
 def _identity(v: Any) -> Any:
@@ -20,8 +27,18 @@ def _identity(v: Any) -> Any:
 class SamsungEntityDescription:
     key: str
     field: str = ''
-    name: Optional[str] = None
-    translation_key: Optional[str] = None
+    # Defaults to `key`: entity names and states live in translations/, never
+    # here, so a descriptor only sets this to share one catalog entry across
+    # several descriptors, or to point at a differently-named one.
+    translation_key: Any = None  # str | Callable[[dict[str, dict]], Optional[str]]
+    # callable form receives the coordinator's full href->rep resource
+    # snapshot and returns the key to use -- for a descriptor shared across
+    # board generations whose state-code meaning isn't guaranteed consistent
+    # between them; see laundry.cycle_select's table-id-gated resolver.
+    translation_placeholders: Optional[Mapping[str, str]] = None
+    # Dynamic resources such as fridge compartments and ice makers use a
+    # device-provided or href-derived instance label inside a translated name.
+    use_instance_name: bool = False
     icon: Optional[str] = None
     entity_category: Optional[str] = None      # 'diagnostic' | 'config' | None
     enabled_default: bool = True
@@ -61,6 +78,7 @@ class SelectDesc(SamsungEntityDescription):
 class SwitchDesc(SamsungEntityDescription):
     device_class: Optional[str] = None
     write_fn: WriteFn = None
+    validate_fn: ValidateFn = None
 
 
 @dataclass(frozen=True, kw_only=True)
@@ -77,6 +95,13 @@ class NumberDesc(SamsungEntityDescription):
     native_min: Optional[float] = None
     native_max: Optional[float] = None
     step: Optional[float] = None
+    # Override native_min/native_max/step from the live rep, when set --
+    # same "static default, live override" shape as unit_fn, for resources
+    # whose sane bounds depend on a per-device value (e.g. a temperature
+    # setpoint reported in Celsius on one device, Fahrenheit on another).
+    native_min_fn: Optional[Callable[[dict], float]] = None
+    native_max_fn: Optional[Callable[[dict], float]] = None
+    step_fn: Optional[Callable[[dict], float]] = None
     range_field: Optional[str] = None  # resource field containing [min, max] list
     write_fn: WriteFn = None
 
@@ -96,6 +121,13 @@ class ClimateDesc(SamsungEntityDescription):
     write_fn: WriteFn = None
 
 
+@dataclass(frozen=True, kw_only=True)
+class FanDesc(SamsungEntityDescription):
+    # Composite fan entity: reads power from /power/0 and speed/support data
+    # from its bound href.  Payloads are (kind, value), like ClimateDesc.
+    write_fn: WriteFn = None
+
+
 PLATFORM_OF: dict[type, str] = {
     SensorDesc:       'sensor',
     BinarySensorDesc: 'binary_sensor',
@@ -105,4 +137,5 @@ PLATFORM_OF: dict[type, str] = {
     NumberDesc:       'number',
     TimeDesc:         'time',
     ClimateDesc:      'climate',
+    FanDesc:          'fan',
 }

custom_components/localthings/select.py

@@ -2,6 +2,7 @@
 from __future__ import annotations
 
 import re
+from typing import Optional
 
 from homeassistant.components.select import SelectEntity
 from homeassistant.config_entries import ConfigEntry
@@ -10,6 +11,7 @@ from homeassistant.helpers.entity_platform import AddEntitiesCallback
 
 from .registry.entities import SelectDesc
 
+from .catalog import translated_states
 from .const import DOMAIN
 from .coordinator import LocalThingsCoordinator
 from .entity import LocalThingsEntity, _is_included
@@ -31,16 +33,37 @@ async def async_setup_entry(
 _CAMEL_BOUNDARY_RE = re.compile(r'(?<=[a-z0-9])(?=[A-Z])')
 
 
-def _display(value, desc: SelectDesc):
+def _translation_state(value: str, known: frozenset[str]) -> str | None:
+    """Return the catalog state `value` normalizes to, else None.
+
+    Samsung reports options in whatever casing the resource uses
+    ('Rinse_Hold', 'SpTtypeBeerDrinks', '1b'); Home Assistant looks state
+    translations up by a lowercase key. Only values the catalog actually
+    knows are normalized -- an unrecognized (or future) vendor value keeps
+    its own readable form rather than becoming an untranslatable slug.
+    """
+    direct = value.lower().replace(' ', '_')
+    if direct in known:
+        return direct
+    snake = _CAMEL_BOUNDARY_RE.sub('_', value).lower().replace(' ', '_')
+    return snake if snake in known else None
+
+
+def _display(value, translation_key: Optional[str]):
     """Turn a raw device option/state value into what's shown in the UI.
 
-    An entity with a translation_key looks its state up in strings.json,
-    and hassfest requires those keys to be lowercase -- so those values
+    `translation_key` is the entity's already-resolved key (SelectDesc.
+    translation_key can itself be a callable -- see entities.py -- so
+    callers pass the resolved value, e.g. self.translation_key, not
+    the raw descriptor field).
+
+    An entity with a translation_key looks its state up in the shipped
+    translation catalog, whose state keys are lowercase -- so those values
     must be lowercased exactly to match, and the device still expects
     that same raw casing back on write (callers map the displayed value
     back to raw via _raw_options()).
 
-    Everything else has no strings.json lookup, so there's no reason to
+    Everything else has no catalog lookup, so there's no reason to
     destroy the device's own casing. Only two cosmetic fixups apply: a
     fully lowercase device-native token (e.g. "voice") is title-cased,
     and a PascalCase token (e.g. "ExtraHigh") gets a space inserted at
@@ -50,8 +73,16 @@ def _display(value, desc: SelectDesc):
     """
     if not isinstance(value, str):
         return value
-    if desc.translation_key:
-        return value.lower()
+    if translation_key:
+        known = translated_states('select', translation_key)
+        if not known:
+            # No state table for this key: either the entity isn't translated
+            # at all, or its name is translated but its options deliberately
+            # aren't (an unrecognized course table, say). Either way the
+            # opaque device value is the best thing to show.
+            return value
+        if translated := _translation_state(value, known):
+            return translated
     if value.islower():
         return value.replace('_', ' ').title()
     return _CAMEL_BOUNDARY_RE.sub(' ', value)
@@ -63,7 +94,7 @@ class LocalThingsSelect(LocalThingsEntity, SelectEntity):
         super().__init__(coordinator, bound)
         desc: SelectDesc = bound.desc
         if not desc.options_field and not callable(desc.options):
-            self._attr_options = [_display(o, desc) for o in desc.options]
+            self._attr_options = [_display(o, self.translation_key) for o in desc.options]
 
     def _raw_options(self) -> list[str]:
         desc: SelectDesc = self._bound.desc
@@ -83,17 +114,17 @@ class LocalThingsSelect(LocalThingsEntity, SelectEntity):
     def options(self) -> list[str]:
         desc: SelectDesc = self._bound.desc
         if desc.options_field or callable(desc.options):
-            return [_display(o, desc) for o in self._raw_options()]
+            return [_display(o, self.translation_key) for o in self._raw_options()]
         return self._attr_options
 
     @property
     def current_option(self):
         raw = (self.coordinator.data or {}).get(self._state_key)
-        return _display(raw, self._bound.desc)
+        return _display(raw, self.translation_key)
 
     async def async_select_option(self, option: str) -> None:
-        desc: SelectDesc = self._bound.desc
         raw = next(
-            (o for o in self._raw_options() if _display(o, desc) == option), option
+            (o for o in self._raw_options() if _display(o, self.translation_key) == option),
+            option,
         )
         await self.coordinator.async_send_command(self._bound, raw)

custom_components/localthings/sensor.py

@@ -61,7 +61,6 @@ class LocalThingsConnectionModeSensor(CoordinatorEntity[LocalThingsCoordinator],
     Disabled by default — it's for troubleshooting, not everyday use."""
 
     _attr_has_entity_name = True
-    _attr_name = 'Connection mode'
     _attr_translation_key = 'connection_mode'
     _attr_entity_category = EntityCategory.DIAGNOSTIC
     _attr_entity_registry_enabled_default = False

custom_components/localthings/strings.json

@@ -1,244 +0,0 @@
-{
-  "entity": {
-    "select": {
-      "door_alert": {
-        "state": {
-          "1": "Alarm 1",
-          "2": "Alarm 2",
-          "3": "Alarm 3",
-          "4": "Alarm 4"
-        }
-      },
-      "brightness_level": {
-        "state": {
-          "33": "Low",
-          "66": "Medium",
-          "100": "High"
-        }
-      },
-      "ice_type": {
-        "state": {
-          "off": "Off",
-          "whiskey_iceball_3": "3 Balls/Day",
-          "whiskey_iceball_6": "6 Balls/Day",
-          "whiskey_iceball_9": "9 Balls/Day"
-        }
-      },
-      "beverage_zone_mode": {
-        "state": {
-          "sp_ttype_beer_drinks": "Beverage",
-          "sp_ttype_wine_dessert": "Wine and Dessert"
-        }
-      },
-      "pantry_zone_mode": {
-        "state": {
-          "fdr_wine": "Wine",
-          "fdr_deli": "Deli",
-          "fdr_drinks": "Drinks"
-        }
-      },
-      "flex_zone_mode": {
-        "state": {
-          "cv_ttype_rf9000a_freeze": "Freeze",
-          "cv_ttype_rf9000a_softfreeze": "Soft Freeze",
-          "cv_ttype_rf9000a_meat_fish": "Meat/Fish",
-          "cv_ttype_rf9000a_fruit_veggies": "Fruit & Veggies",
-          "cv_ttype_rf9000a_beverage": "Beverage",
-          "cv_fdr_wine": "Wine",
-          "cv_fdr_deli": "Deli",
-          "cv_fdr_beverage": "Beverage",
-          "cv_fdr_meat": "Meat",
-          "cv_fdr_soft_freezer": "Soft Freezer"
-        }
-      },
-      "dishwasher_cycle": {
-        "state": {
-          "0e": "AI Wash",
-          "07": "Pre blast",
-          "90": "Self clean",
-          "86": "Normal",
-          "83": "Express 60",
-          "84": "Heavy",
-          "8d": "Pots and pans",
-          "80": "Delicate",
-          "8e": "Plastic",
-          "8f": "Baby Care"
-        }
-      },
-      "washer_cycle": {
-        "state": {
-          "1c": "Eco 40-60",
-          "1d": "Super Speed",
-          "21": "Colours",
-          "1b": "Cotton",
-          "1e": "15' Quick Wash",
-          "29": "Drum Clean+",
-          "24": "Towels",
-          "33": "Bedding",
-          "28": "Drain/Spin",
-          "26": "Delicates",
-          "27": "Rinse+Spin",
-          "22": "Wool",
-          "20": "Hygiene Steam",
-          "23": "Outdoor",
-          "25": "Synthetics",
-          "32": "Shirts",
-          "2f": "Activewear",
-          "2e": "Baby Care",
-          "30": "Cloudy Day",
-          "66": "Denim",
-          "2d": "Silent Wash",
-          "8f": "Intense Cold",
-          "96": "Less Microfiber"
-        }
-      },
-      "dryer_cycle": {
-        "state": {
-          "16": "Cotton",
-          "18": "Synthetics",
-          "19": "Delicates",
-          "1a": "Wool",
-          "1b": "Bedding",
-          "1c": "Shirts",
-          "1d": "Towels",
-          "1e": "Outdoor",
-          "1f": "Mixed Load",
-          "20": "Iron Dry",
-          "23": "Quick Dry 35",
-          "24": "Cool Air",
-          "25": "Warm Air",
-          "27": "Time Dry"
-        }
-      },
-      "washer_dosing_quantity": {
-        "state": {
-          "00": "None",
-          "01": "Low",
-          "02": "Medium",
-          "03": "High"
-        }
-      },
-      "washer_detergent_water_hardness": {
-        "state": {
-          "01": "Soft",
-          "02": "Medium",
-          "03": "Hard"
-        }
-      },
-      "washer_softener_concentration": {
-        "state": {
-          "01": "1x",
-          "02": "2x",
-          "03": "3x"
-        }
-      },
-      "washer_dry_level": {
-        "state": {
-          "none": "Off",
-          "cupboard": "Cupboard",
-          "30": "30 min",
-          "60": "1 hr",
-          "90": "1 hr 30",
-          "120": "2 hr",
-          "180": "3 hr",
-          "240": "4 hr"
-        }
-      }
-    },
-    "sensor": {
-      "ice_making_status": {
-        "state": {
-          "icestatus_stop": "Idle",
-          "icestatus_run": "Making ice"
-        }
-      },
-      "connection_mode": {
-        "state": {
-          "observe": "Push (observe)",
-          "poll": "Polling"
-        }
-      },
-      "machine_state": {
-        "state": {
-          "idle": "Idle",
-          "active": "Active",
-          "pause": "Paused"
-        }
-      },
-      "air_filter_status": {
-        "state": {
-          "normal": "Normal",
-          "wash": "Wash",
-          "replace": "Replace"
-        }
-      }
-    },
-    "climate": {
-      "airconditioner": {
-        "state_attributes": {
-          "fan_mode": {
-            "state": {
-              "auto": "Auto",
-              "low": "Low",
-              "medium": "Medium",
-              "high": "High",
-              "turbo": "Turbo"
-            }
-          },
-          "swing_mode": {
-            "state": {
-              "off": "Fixed",
-              "both": "All directions",
-              "vertical": "Up and down"
-            }
-          },
-          "preset_mode": {
-            "state": {
-              "none": "Off",
-              "sleep": "Sleep",
-              "quiet": "Quiet",
-              "smart": "Smart",
-              "speed": "Speed"
-            }
-          }
-        }
-      }
-    }
-  },
-  "config": {
-    "step": {
-      "user": {
-        "title": "Add Samsung Appliance",
-        "description": "Enter the IP address of your Samsung appliance and the AC14K_M CA credentials used to mint device certificates. {reuse_note}",
-        "data": {
-          "host": "IP Address",
-          "ca_cert_pem": "CA Certificate (PEM)",
-          "ca_key_pem": "CA Private Key (PEM)"
-        },
-        "data_description": {
-          "host": "Local IP address of your Samsung appliance (e.g. 192.168.1.50).",
-          "ca_cert_pem": "The PEM-encoded AC14K_M CA certificate chain. Paste the full contents of your fullchain PEM including all BEGIN/END CERTIFICATE blocks.",
-          "ca_key_pem": "The PEM-encoded AC14K_M private key. Paste the full contents including the BEGIN/END PRIVATE KEY header and footer."
-        }
-      },
-      "confirm_unknown_type": {
-        "title": "Appliance type not recognized",
-        "description": "This appliance reported oneUiVersion \"{one_ui_version}\", which isn't a recognized type. It'll still be added, but only with common capabilities (power, alarms, etc. where present) rather than the full set for its family. You can help add full support afterward by downloading diagnostics for this device (Settings > Devices & Services > this device > the menu > Download diagnostics) and filing them in a new issue. Submit to add it anyway."
-      }
-    },
-    "error": {
-      "cannot_connect": "Cannot connect to the device. Verify the IP address is reachable and the CA credentials are correct.",
-      "invalid_ca": "The CA certificate or private key could not be loaded. Verify the PEM contents are correct and the key matches the certificate.",
-      "unknown": "Unexpected error. Check the Home Assistant logs for details."
-    },
-    "abort": {
-      "already_configured": "This device is already configured."
-    }
-  },
-  "issues": {
-    "device_gap": {
-      "title": "Incomplete capability coverage for {device_name}",
-      "description": "This device is missing full capability coverage. Either its appliance type wasn't recognized, or some of the resources it exposes aren't modeled yet. It'll keep working with whatever is already supported. You can help expand support by going to Settings > Devices & Services > {device_name} > the menu (top right) > Download diagnostics, then filing it with the linked issue template."
-    }
-  }
-}

custom_components/localthings/translations/nl.json

@@ -0,0 +1,852 @@
+{
+  "entity": {
+    "binary_sensor": {
+      "any_burner_active": {
+        "name": "Een brander actief"
+      },
+      "automatic_operation": {
+        "name": "Automatische werking"
+      },
+      "burner_hot_surface": {
+        "name": "Brander {number} heet oppervlak"
+      },
+      "cloud_connected": {
+        "name": "Verbonden met cloud"
+      },
+      "cooktop_safety_shutoff_enabled": {
+        "name": "Automatische uitschakeling heet oppervlak ingeschakeld"
+      },
+      "current_limit_enabled": {
+        "name": "Stroombegrenzing ingeschakeld"
+      },
+      "cycle_active": {
+        "name": "Actief"
+      },
+      "defrost_active": {
+        "name": "Ontdooien actief"
+      },
+      "detergent_low": {
+        "name": "Wasmiddel bijna op"
+      },
+      "device_active": {
+        "name": "Apparaat actief"
+      },
+      "door_open": {
+        "name": "Deur"
+      },
+      "firmware_update": {
+        "name": "Firmware-update beschikbaar"
+      },
+      "instance_open": {
+        "name": "{instance_name} open"
+      },
+      "paired_hood_connected": {
+        "name": "Gekoppelde afzuigkap verbonden"
+      },
+      "paired_hood_light": {
+        "name": "Verlichting gekoppelde afzuigkap"
+      },
+      "paired_hood_power": {
+        "name": "Gekoppelde afzuigkap actief"
+      },
+      "periodic_air_sensing": {
+        "name": "Periodieke luchtmeting"
+      },
+      "power_state": {
+        "name": "Voedingsstatus"
+      },
+      "rapid_freezing": {
+        "name": "Snelvriezen"
+      },
+      "rapid_fridge": {
+        "name": "Snelkoelen"
+      },
+      "remote_control": {
+        "name": "Smart Control"
+      },
+      "softener_low": {
+        "name": "Wasverzachter bijna op"
+      }
+    },
+    "button": {
+      "diagnosis_start": {
+        "name": "Diagnose starten"
+      },
+      "pause": {
+        "name": "Pauzeren"
+      },
+      "selfcheck_start": {
+        "name": "Zelfcontrole starten"
+      },
+      "start": {
+        "name": "Starten"
+      },
+      "stop": {
+        "name": "Stoppen"
+      }
+    },
+    "climate": {
+      "airconditioner": {
+        "state_attributes": {
+          "fan_mode": {
+            "state": {
+              "turbo": "Turbo"
+            }
+          },
+          "preset_mode": {
+            "state": {
+              "quiet": "Stil",
+              "smart": "Slim",
+              "speed": "Snel"
+            }
+          }
+        }
+      }
+    },
+    "number": {
+      "cook_time": {
+        "name": "Bereidingstijd"
+      },
+      "delay_start_hours": {
+        "name": "Uitgestelde start"
+      },
+      "instance_setpoint": {
+        "name": "Instelpunt {instance_name}"
+      },
+      "oven_setpoint": {
+        "name": "Instelpunt"
+      },
+      "sound_volume": {
+        "name": "Geluidsvolume"
+      }
+    },
+    "select": {
+      "ai_energy_level": {
+        "name": "Niveau AI Energy Mode"
+      },
+      "beverage_zone_mode": {
+        "name": "Modus drankenzone",
+        "state": {
+          "sp_ttype_beer_drinks": "Dranken",
+          "sp_ttype_wine_dessert": "Wijn en dessert"
+        }
+      },
+      "brightness_level": {
+        "name": "Nachthelderheid",
+        "state": {
+          "33": "Laag",
+          "66": "Gemiddeld",
+          "100": "Hoog"
+        }
+      },
+      "day_brightness": {
+        "name": "Helderheid kast",
+        "state": {
+          "33": "Laag",
+          "66": "Gemiddeld",
+          "100": "Hoog"
+        }
+      },
+      "buzzer_sound": {
+        "name": "Zoemergeluid",
+        "state": {
+          "off": "Uit",
+          "on": "Aan"
+        }
+      },
+      "cycle": {
+        "name": "Programma"
+      },
+      "detergent_quantity": {
+        "name": "Hoeveelheid wasmiddel",
+        "state": {
+          "00": "Geen",
+          "01": "Laag",
+          "02": "Gemiddeld",
+          "03": "Hoog"
+        }
+      },
+      "detergent_water_hardness": {
+        "name": "Waterhardheid voor wasmiddel",
+        "state": {
+          "01": "Zacht",
+          "02": "Gemiddeld",
+          "03": "Hard"
+        }
+      },
+      "dishwasher_cycle": {
+        "name": "Programma",
+        "state": {
+          "80": "Delicaat",
+          "83": "Express 60",
+          "84": "Intensief",
+          "86": "Normaal",
+          "90": "Zelfreiniging",
+          "0e": "AI Wash",
+          "07": "Voorspoelen",
+          "8d": "Potten en pannen",
+          "8e": "Kunststof",
+          "8f": "Babyverzorging"
+        }
+      },
+      "door_alert": {
+        "name": "Deuralarm",
+        "state": {
+          "1": "Alarm 1",
+          "2": "Alarm 2",
+          "3": "Alarm 3",
+          "4": "Alarm 4"
+        }
+      },
+      "dryer_cycle_table_03": {
+        "name": "Programma",
+        "state": {
+          "16": "Katoen",
+          "18": "Synthetisch",
+          "19": "Fijne was",
+          "20": "Strijkdroog",
+          "23": "Snel drogen 35'",
+          "24": "Koude lucht",
+          "25": "Warme lucht",
+          "27": "Tijdprogramma",
+          "1a": "Wol",
+          "1b": "Beddengoed",
+          "1c": "Overhemden",
+          "1d": "Handdoeken",
+          "1e": "Outdoor",
+          "1f": "Gemengde was"
+        }
+      },
+      "finish_sound": {
+        "name": "Eindgeluid",
+        "state": {
+          "off": "Uit",
+          "on": "Aan"
+        }
+      },
+      "flex_zone_mode": {
+        "name": "Modus FlexZone",
+        "state": {
+          "cv_ttype_rf9000a_freeze": "Vriezen",
+          "cv_ttype_rf9000a_softfreeze": "Zachtvriezen",
+          "cv_ttype_rf9000a_meat_fish": "Vlees/vis",
+          "cv_ttype_rf9000a_fruit_veggies": "Fruit en groenten",
+          "cv_ttype_rf9000a_beverage": "Dranken",
+          "cv_fdr_wine": "Wijn",
+          "cv_fdr_deli": "Delicatessen",
+          "cv_fdr_beverage": "Dranken",
+          "cv_fdr_meat": "Vlees",
+          "cv_fdr_soft_freezer": "Zachtvriezer"
+        }
+      },
+      "heated_dry": {
+        "name": "Smart Dry",
+        "state": {
+          "off": "Uit",
+          "low": "Laag",
+          "high": "Hoog",
+          "extra_high": "Extra hoog"
+        }
+      },
+      "ice_type": {
+        "name": "Type {instance_name}",
+        "state": {
+          "off": "Uit",
+          "whiskey_iceball_3": "3 ijsballen per dag",
+          "whiskey_iceball_6": "6 ijsballen per dag",
+          "whiskey_iceball_9": "9 ijsballen per dag"
+        }
+      },
+      "led_brightness": {
+        "name": "Helderheid deur-LED",
+        "state": {
+          "low": "Laag",
+          "high": "Hoog"
+        }
+      },
+      "led_night_brightness": {
+        "name": "Nachtelijke helderheid deur-LED",
+        "state": {
+          "low": "Laag",
+          "high": "Hoog"
+        }
+      },
+      "oven_mode": {
+        "name": "Bereidingsmodus",
+        "state": {
+          "no_operation": "Niet actief",
+          "bake": "Bakken",
+          "broil": "Grillen",
+          "convection": "Hetelucht",
+          "convection_bake": "Bakken met hetelucht",
+          "convection_broil": "Grillen met hetelucht",
+          "frozen_pizza_plus": "Frozen Pizza+",
+          "slow_cook": "Langzaam garen",
+          "plate_warm": "Borden warmhouden",
+          "air_fry": "Airfryen"
+        }
+      },
+      "pantry_zone_mode": {
+        "name": "Modus voorraadzone",
+        "state": {
+          "fdr_wine": "Wijn",
+          "fdr_deli": "Delicatessen",
+          "fdr_drinks": "Dranken"
+        }
+      },
+      "range_burner_power_level": {
+        "name": "Vermogensniveau brander {number}",
+        "state": {
+          "0": "Uit",
+          "boost": "Boost",
+          "simmer": "Sudderen"
+        }
+      },
+      "range_hood_lamp_brightness": {
+        "name": "Helderheid lamp",
+        "state": {
+          "1": "Niveau 1",
+          "2": "Niveau 2"
+        }
+      },
+      "rinse_cycles": {
+        "name": "Spoelcycli"
+      },
+      "softener_concentration": {
+        "name": "Concentratie wasverzachter",
+        "state": {
+          "01": "1x",
+          "02": "2x",
+          "03": "3x"
+        }
+      },
+      "softener_quantity": {
+        "name": "Hoeveelheid wasverzachter",
+        "state": {
+          "00": "Geen",
+          "01": "Laag",
+          "02": "Gemiddeld",
+          "03": "Hoog"
+        }
+      },
+      "sound_mode": {
+        "name": "Geluidsmodus",
+        "state": {
+          "voice": "Spraak",
+          "tone": "Toon",
+          "mute": "Dempen"
+        }
+      },
+      "spin_speed": {
+        "name": "Centrifugesnelheid",
+        "state": {
+          "rinse_hold": "Spoelstop",
+          "no_spin": "Niet centrifugeren",
+          "low": "Laag",
+          "medium": "Gemiddeld",
+          "high": "Hoog"
+        }
+      },
+      "wash_temperature": {
+        "name": "Wastemperatuur",
+        "state": {
+          "none": "Geen",
+          "cold": "Koud",
+          "cool": "Koel",
+          "warm": "Warm",
+          "hot": "Heet",
+          "extra_hot": "Extra heet"
+        }
+      },
+      "washer_cycle_table_02": {
+        "name": "Programma",
+        "state": {
+          "01": "Normaal",
+          "04": "Snelle was",
+          "17": "Gedownload",
+          "1b": "Katoen",
+          "1c": "Eco 40-60",
+          "1d": "Super Speed",
+          "1e": "15' Snelle was",
+          "1f": "Intensief koud",
+          "20": "Hygiënisch stomen",
+          "21": "Bonte was",
+          "22": "Wol",
+          "23": "Outdoor",
+          "24": "Handdoeken",
+          "25": "Synthetisch",
+          "26": "Fijne was",
+          "27": "Spoelen+centrifugeren",
+          "28": "Afpompen/centrifugeren",
+          "29": "Drum Clean+",
+          "2d": "Stille was",
+          "2e": "Babyverzorging",
+          "2f": "Sportkleding",
+          "30": "Bewolkte dag",
+          "32": "Overhemden",
+          "33": "Beddengoed",
+          "36": "Wassen+drogen",
+          "37": "Air Wash",
+          "38": "Katoen drogen",
+          "39": "Synthetisch drogen",
+          "53": "Intensief",
+          "55": "Sportkleding",
+          "57": "Fijn",
+          "5e": "Spoelen+centrifugeren",
+          "65": "Bonte was",
+          "66": "Spijkergoed",
+          "7c": "Witte was",
+          "7d": "Beddengoed/Waterdicht",
+          "7e": "Zelfreinigend",
+          "86": "Diep wassen",
+          "8f": "Intensief koud",
+          "96": "Minder microvezels",
+          "2b": "AI Wash",
+          "2a": "Spijkerbroek"
+        }
+      },
+      "washer_dry_level": {
+        "name": "Droogniveau",
+        "state": {
+          "30": "30 min",
+          "60": "1 uur",
+          "90": "1 uur 30 min",
+          "120": "2 uur",
+          "180": "3 uur",
+          "240": "4 uur",
+          "none": "Uit",
+          "cupboard": "Kastdroog"
+        }
+      }
+    },
+    "sensor": {
+      "air_filter_usage": {
+        "name": "Filterverbruik"
+      },
+      "air_sensing_state": {
+        "name": "Status luchtmeting"
+      },
+      "alarm_code": {
+        "name": "Alarmcode"
+      },
+      "auto_ventilation_action": {
+        "name": "Actie automatische ventilatie"
+      },
+      "automatic_ventilation_state": {
+        "name": "Status automatische ventilatie"
+      },
+      "burner_state": {
+        "name": "Status brander {number}"
+      },
+      "clean_level": {
+        "name": "Reinigingsniveau"
+      },
+      "connection_mode": {
+        "name": "Verbindingsmodus",
+        "state": {
+          "observe": "Push (observeren)",
+          "poll": "Polling"
+        }
+      },
+      "cooktop_state": {
+        "name": "Status kookplaat"
+      },
+      "current_limit_level": {
+        "name": "Niveau stroombegrenzing"
+      },
+      "current_temp_c": {
+        "name": "Temperatuur"
+      },
+      "diagnosis": {
+        "name": "Diagnose"
+      },
+      "diagnosis_status": {
+        "name": "Diagnosestatus"
+      },
+      "drum_clean_cycles_remaining": {
+        "name": "Trommelreiniging over"
+      },
+      "drum_clean_last_cleaned": {
+        "name": "Trommel laatst gereinigd"
+      },
+      "dry_level": {
+        "name": "Droogniveau"
+      },
+      "dry_time": {
+        "name": "Droogtijd"
+      },
+      "dryer_type": {
+        "name": "Type droger"
+      },
+      "dust": {
+        "name": "Stof"
+      },
+      "energy_kwh": {
+        "name": "Energie"
+      },
+      "energy_last_month_kwh": {
+        "name": "Energie (vorige maand)"
+      },
+      "energy_saved_kwh": {
+        "name": "Bespaarde energie"
+      },
+      "energy_this_month_kwh": {
+        "name": "Energie (deze maand)"
+      },
+      "fan_direction": {
+        "name": "Ventilatorrichting"
+      },
+      "fan_speed_level": {
+        "name": "Ventilatorniveau"
+      },
+      "filter_progress": {
+        "name": "Filterverbruik"
+      },
+      "filter_usage": {
+        "name": "Filtergebruik"
+      },
+      "fine_dust": {
+        "name": "Fijnstof"
+      },
+      "finish_time": {
+        "name": "Geschatte eindtijd"
+      },
+      "completion_minutes": {
+        "name": "Voltooiingstijd"
+      },
+      "freezer_temperature": {
+        "name": "Vriezertemperatuur"
+      },
+      "fridge_temperature": {
+        "name": "Koelkasttemperatuur"
+      },
+      "hood_filter_capacity": {
+        "name": "Filtercapaciteit"
+      },
+      "hood_filter_usage": {
+        "name": "Filterverbruik"
+      },
+      "instance_temperature": {
+        "name": "Temperatuur {instance_name}"
+      },
+      "job_beginning_status": {
+        "name": "Status programmastart"
+      },
+      "last_air_sensing_level": {
+        "name": "Laatste luchtmeetniveau"
+      },
+      "last_air_sensing_time": {
+        "name": "Tijdstip laatste luchtmeting"
+      },
+      "main_timer_current": {
+        "name": "Huidige timerwaarde"
+      },
+      "main_timer_state": {
+        "name": "Timerstatus"
+      },
+      "odor": {
+        "name": "Geur"
+      },
+      "operating_mode": {
+        "name": "Werkingsmodus"
+      },
+      "operation_origin": {
+        "name": "Bron laatste bediening"
+      },
+      "operation_time_minutes": {
+        "name": "Werkingsduur"
+      },
+      "oven_state": {
+        "name": "Status ovenruimte"
+      },
+      "paired_hood_fan_speed": {
+        "name": "Ventilatorsnelheid gekoppelde afzuigkap"
+      },
+      "paired_hood_firmware": {
+        "name": "Firmware gekoppelde afzuigkap"
+      },
+      "paired_hood_model": {
+        "name": "Model gekoppelde afzuigkap"
+      },
+      "power_energy_kwh": {
+        "name": "Energieverbruik"
+      },
+      "power_watts": {
+        "name": "Vermogen"
+      },
+      "progress": {
+        "name": "Voortgang"
+      },
+      "progress_percentage": {
+        "name": "Voortgangspercentage"
+      },
+      "selfcheck_error": {
+        "name": "Fout zelfcontrole"
+      },
+      "selfcheck_result": {
+        "name": "Resultaat zelfcontrole"
+      },
+      "selfcheck_status": {
+        "name": "Status zelfcontrole"
+      },
+      "super_fine_dust": {
+        "name": "Ultrafijnstof"
+      },
+      "water_liters": {
+        "name": "Waterverbruik"
+      },
+      "machine_state": {
+        "name": "Machinestatus",
+        "state": {
+          "idle": "Inactief",
+          "active": "Actief",
+          "pause": "Gepauzeerd"
+        }
+      },
+      "filter_status": {
+        "name": "Filterstatus",
+        "state": {
+          "normal": "Normaal",
+          "wash": "Reinigen",
+          "replace": "Vervangen"
+        }
+      },
+      "ice_making_status": {
+        "name": "{instance_name} ijsmaakstatus",
+        "state": {
+          "icestatus_stop": "Inactief",
+          "icestatus_run": "IJs maken"
+        }
+      }
+    },
+    "switch": {
+      "ai_energy_level": {
+        "name": "AI Energy Mode"
+      },
+      "air_purify": {
+        "name": "Luchtzuivering"
+      },
+      "auto_clean": {
+        "name": "Automatisch reinigen"
+      },
+      "auto_door_opener": {
+        "name": "Automatische deuropener"
+      },
+      "auto_release_dry": {
+        "name": "Auto Release Dry"
+      },
+      "autofill": {
+        "name": "Automatisch gevulde waterkan"
+      },
+      "bubble_soak": {
+        "name": "Bubble Soak"
+      },
+      "cabinet_light_dim": {
+        "name": "Geleidelijk feller"
+      },
+      "cabinet_light_switch": {
+        "name": "Kastverlichting"
+      },
+      "child_lock": {
+        "name": "Kinderslot"
+      },
+      "defrost_delay": {
+        "name": "Ontdooien uitstellen"
+      },
+      "display_light": {
+        "name": "Displayverlichting"
+      },
+      "fast_preheat": {
+        "name": "Snel voorverwarmen"
+      },
+      "fridge_sound": {
+        "name": "Geluid"
+      },
+      "ice_maker_enabled": {
+        "name": "IJsmaker"
+      },
+      "ice_night_mode": {
+        "name": "Stille nachtmodus ijsmaker"
+      },
+      "instance_enabled": {
+        "name": "{instance_name} ingeschakeld"
+      },
+      "intensive": {
+        "name": "Intensive"
+      },
+      "lamp": {
+        "name": "Lamp"
+      },
+      "led_night_light": {
+        "name": "Nachtverlichting deur-LED"
+      },
+      "mute_once": {
+        "name": "Eenmalig dempen"
+      },
+      "natural_steam": {
+        "name": "Natuurlijke stoom"
+      },
+      "power_switch": {
+        "name": "Voeding"
+      },
+      "pre_wash": {
+        "name": "Voorwas"
+      },
+      "rapid_freezing": {
+        "name": "Snelvriezen"
+      },
+      "rapid_fridge": {
+        "name": "Snelkoelen"
+      },
+      "sabbath_mode": {
+        "name": "Sabbatmodus"
+      },
+      "sanitize": {
+        "name": "Hygiëne"
+      },
+      "sound": {
+        "name": "Geluid"
+      },
+      "storm_wash": {
+        "name": "Storm Wash+"
+      },
+      "welcome_lighting": {
+        "name": "Welkomstverlichting"
+      },
+      "wrinkle_prevent": {
+        "name": "Kreukpreventie"
+      }
+    },
+    "time": {
+      "led_night_end": {
+        "name": "Einde nachtverlichting deur-LED"
+      },
+      "led_night_start": {
+        "name": "Start nachtverlichting deur-LED"
+      },
+      "night_end": {
+        "name": "Einde nachtverlichting"
+      },
+      "night_start": {
+        "name": "Start nachtverlichting"
+      }
+    }
+  },
+  "config": {
+    "step": {
+      "user": {
+        "title": "Samsung-apparaat toevoegen",
+        "description": "Voer het IP-adres van je Samsung-apparaat en de AC14K_M-CA-inloggegevens in waarmee apparaatcertificaten worden aangemaakt.",
+        "data": {
+          "host": "IP-adres",
+          "ca_cert_pem": "CA-certificaat (PEM)",
+          "ca_key_pem": "Privésleutel van CA (PEM)"
+        },
+        "data_description": {
+          "host": "Het lokale IP-adres van je Samsung-apparaat (bijvoorbeeld 192.168.1.50).",
+          "ca_cert_pem": "De PEM-gecodeerde AC14K_M-CA-certificaatketen. Plak de volledige inhoud van je fullchain-PEM, inclusief alle blokken BEGIN CERTIFICATE en END CERTIFICATE.",
+          "ca_key_pem": "De PEM-gecodeerde AC14K_M-privésleutel. Plak de volledige inhoud, inclusief de kop- en voettekst BEGIN PRIVATE KEY en END PRIVATE KEY."
+        }
+      },
+      "user_reuse": {
+        "title": "Samsung-apparaat toevoegen",
+        "description": "Voer het IP-adres van je Samsung-apparaat in. De CA-inloggegevens van een bestaand LocalThings-apparaat worden hergebruikt.",
+        "data": {
+          "host": "IP-adres"
+        },
+        "data_description": {
+          "host": "Het lokale IP-adres van je Samsung-apparaat (bijvoorbeeld 192.168.1.50)."
+        }
+      },
+      "confirm_unknown_type": {
+        "title": "Apparaattype niet herkend",
+        "description": "Dit apparaat meldt oneUiVersion \"{one_ui_version}\", wat niet als apparaattype wordt herkend. Het apparaat wordt toch toegevoegd, maar alleen met algemene mogelijkheden (zoals voeding en alarmen, voor zover aanwezig), in plaats van alle mogelijkheden voor deze apparaatfamilie. Je kunt daarna helpen volledige ondersteuning toe te voegen door diagnostische gegevens voor dit apparaat te downloaden (Instellingen > Apparaten & diensten > dit apparaat > het menu > Diagnostische gegevens downloaden) en deze bij een nieuw issue te voegen. Kies Verzenden om het apparaat toch toe te voegen."
+      },
+      "confirm_unknown_type_no_version": {
+        "title": "Apparaattype niet herkend",
+        "description": "Dit apparaat meldt geen oneUiVersion en het apparaattype kon niet worden herkend. Het apparaat wordt toch toegevoegd, maar alleen met algemene mogelijkheden (zoals voeding en alarmen, voor zover aanwezig), in plaats van alle mogelijkheden voor deze apparaatfamilie. Je kunt daarna helpen volledige ondersteuning toe te voegen door diagnostische gegevens voor dit apparaat te downloaden (Instellingen > Apparaten & diensten > dit apparaat > het menu > Diagnostische gegevens downloaden) en deze bij een nieuw issue te voegen. Kies Verzenden om het apparaat toch toe te voegen."
+      }
+    },
+    "error": {
+      "cannot_connect": "Kan geen verbinding maken met het apparaat. Controleer of het IP-adres bereikbaar is en de CA-inloggegevens juist zijn.",
+      "invalid_ca": "Het CA-certificaat of de privésleutel kon niet worden geladen. Controleer of de PEM-inhoud juist is en of de sleutel bij het certificaat hoort.",
+      "unknown": "Onverwachte fout. Raadpleeg de Home Assistant-logboeken voor meer informatie."
+    },
+    "abort": {
+      "already_configured": "Apparaat is al geconfigureerd"
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "title": "LocalThings-opties",
+        "menu_options": {
+          "settings": "Schrijfinstellingen voor afstandsbediening",
+          "debug_write": "Foutopsporing: naar een resource schrijven"
+        }
+      },
+      "settings": {
+        "title": "Schrijfinstellingen voor afstandsbediening",
+        "description": "Sommige apparaten accepteren bepaalde schrijfbewerkingen (bijvoorbeeld de standaarddosering van wasmiddel of wasverzachter op een wasmachine), ook als ze melden dat de afstandsbediening is uitgeschakeld. LocalThings blokkeert standaard elke schrijfbewerking met een duidelijke foutmelding wanneer een apparaat meldt dat de afstandsbediening is uitgeschakeld, in plaats van het apparaat de opdracht stilzwijgend te laten weigeren. Schakel deze optie alleen in als je hebt bevestigd dat schrijfbewerkingen op dit apparaat echt werken wanneer de afstandsbediening is uitgeschakeld. Anders verruil je de duidelijke foutmelding voor een stille mislukking.",
+        "data": {
+          "bypass_remote_control_lock": "Schrijfbewerkingen toestaan wanneer afstandsbediening als uitgeschakeld wordt gemeld"
+        }
+      },
+      "debug_write": {
+        "title": "Foutopsporing: naar een resource schrijven",
+        "description": "Geavanceerd hulpmiddel om apparaatspecifiek schrijfgedrag te onderzoeken. Kies de resource (href) waarnaar je wilt schrijven, of voer een aangepaste resource in die niet in de lijst staat. Hiermee wordt de blokkering bij een uitgeschakelde afstandsbediening omzeild en worden precies de opgegeven velden verzonden. Dit kan de configuratie van je apparaat verstoren, dus gebruik het bewust.",
+        "data": {
+          "href": "Href van resource"
+        }
+      },
+      "debug_edit": {
+        "title": "Schrijfbewerking voor foutopsporing: {href}",
+        "description": "Huidige waarde van `{href}`:\n```\n{current_value}\n```\nVoer hieronder ALLEEN de velden in die je wilt wijzigen. Wat je invoert, wordt ongewijzigd naar het apparaat verzonden (als gedeeltelijke update). Het wordt NIET samengevoegd met de hierboven getoonde velden, dus plak niet de volledige waarde terug. Let op de typen: een numerieke tekenreeks zoals \"1\" moet tussen aanhalingstekens blijven staan. Een 1 zonder aanhalingstekens wordt als integer verzonden, wat sommige apparaten weigeren.",
+        "data": {
+          "payload": "Te schrijven payload"
+        }
+      },
+      "debug_result": {
+        "title": "Resultaat van schrijfbewerking voor foutopsporing",
+        "description": "Het apparaat heeft CoAP-code {code} geretourneerd. Een code in de 2.xx-klasse betekent dat de schrijfbewerking is geaccepteerd; 4.xx/5.xx betekent dat deze is geweigerd. De resource heeft nu de volgende waarde:\n```\n{new_value}\n```\nAls de waarde ongewijzigd is, heeft het apparaat de schrijfbewerking waarschijnlijk genegeerd. Kies wat je hierna wilt doen:",
+        "menu_options": {
+          "debug_write": "Naar een andere resource schrijven",
+          "finish": "Voltooien"
+        }
+      }
+    },
+    "error": {
+      "empty_payload": "Voer ten minste één veld in om te schrijven.",
+      "write_failed": "De schrijfbewerking is mislukt. Raadpleeg de Home Assistant-logboeken voor meer informatie."
+    },
+    "abort": {
+      "not_loaded": "Dit apparaat is nog niet verbonden. Probeer het opnieuw zodra het is geladen."
+    }
+  },
+  "issues": {
+    "device_gap": {
+      "title": "Onvolledige ondersteuning van mogelijkheden voor {device_name}",
+      "description": "Niet alle mogelijkheden van dit apparaat worden ondersteund. Het apparaattype is niet herkend of sommige beschikbare resources zijn nog niet gemodelleerd. Het apparaat blijft werken met de mogelijkheden die al worden ondersteund. Je kunt helpen de ondersteuning uit te breiden: ga naar Instellingen > Apparaten & diensten > {device_name} > het menu (rechtsboven) > Diagnostische gegevens downloaden en voeg het bestand daarna bij via de gekoppelde issue-template."
+    }
+  },
+  "exceptions": {
+    "remote_control_disabled": {
+      "message": "Afstandsbediening is uitgeschakeld op dit apparaat. Raadpleeg de handleiding van je apparaat om afstandsbediening in te schakelen voordat Home Assistant het kan bedienen."
+    },
+    "debug_payload_empty": {
+      "message": "De payload voor de schrijfbewerking voor foutopsporing moet een niet-leeg object zijn."
+    },
+    "resource_href_required": {
+      "message": "Een resource-href is vereist."
+    },
+    "bubble_soak_unavailable_for_cycle": {
+      "message": "Bubble Soak is niet beschikbaar voor het geselecteerde programma."
+    },
+    "pre_wash_unavailable_for_cycle": {
+      "message": "Voorwas is niet beschikbaar voor het geselecteerde programma."
+    },
+    "intensive_unavailable_for_cycle": {
+      "message": "Intensief is niet beschikbaar voor het geselecteerde programma."
+    }
+  }
+}

tests/fixtures/air_purifier_device.json

@@ -0,0 +1,200 @@
+{
+  "device0": [
+    {
+      "rt": [
+        "x.com.samsung.devcol"
+      ],
+      "if": [
+        "oic.if.baseline",
+        "oic.if.ll",
+        "oic.if.b"
+      ]
+    },
+    {
+      "href": "/airflow/0",
+      "rep": {
+        "speed": 0,
+        "direction": "Off"
+      }
+    },
+    {
+      "href": "/airflow/vs/0",
+      "rep": {
+        "x.com.samsung.da.speedLevel": "0",
+        "x.com.samsung.da.direction": "Off"
+      }
+    },
+    {
+      "href": "/alarms/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Alarm",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "ErrorCode_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-23T15:56:55",
+            "x.com.samsung.da.state": "Deleted"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.description": "Alarm",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "FilterAlarm",
+            "x.com.samsung.da.triggeredTime": "2026-07-23T15:56:55",
+            "x.com.samsung.da.state": "Created"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/configuration/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/consumable/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.state": "100",
+            "x.com.samsung.da.name": "FilterProgress"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/devicespecificinfo/vs/0",
+      "rep": {
+        "x.com.samsung.da.deviceActive": true
+      }
+    },
+    {
+      "href": "/diagnosis/vs/0",
+      "rep": {
+        "x.com.samsung.da.diagnosisStart": "Ready"
+      }
+    },
+    {
+      "href": "/energy/consumption/0",
+      "rep": {}
+    },
+    {
+      "href": "/energy/consumption/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/humidity/0",
+      "rep": {}
+    },
+    {
+      "href": "/humidity/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/information/vs/0",
+      "rep": {
+        "x.com.samsung.da.modelNum": "ARTIK051_TVTL_18K|10193941|7000023C001111C40100000000000000",
+        "x.com.samsung.da.description": "ARTIK051_TVTL_18K",
+        "x.com.samsung.da.serialNum": "**REDACTED**",
+        "x.com.samsung.da.otnDUID": "**REDACTED**",
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Software",
+            "x.com.samsung.da.number": "02059A230513",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.number": "19071703,19071706",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/mode/vs/0",
+      "rep": {
+        "x.com.samsung.da.options": [
+          "Comode_Off",
+          "Blooming_0",
+          "Light_On",
+          "OptionCode_60282"
+        ]
+      }
+    },
+    {
+      "href": "/power/0",
+      "rep": {
+        "value": false
+      }
+    },
+    {
+      "href": "/power/vs/0",
+      "rep": {
+        "x.com.samsung.da.power": "Off"
+      }
+    },
+    {
+      "href": "/realtimenotiforclient/vs/0",
+      "rep": {
+        "x.com.samsung.da.timeforshortnoti": "0",
+        "x.com.samsung.da.longnotisubscription": "true",
+        "x.com.samsung.da.periodicnotisubscription": "false"
+      }
+    },
+    {
+      "href": "/sensors/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Sensor for Dust",
+            "x.com.samsung.da.type": "Dust",
+            "x.com.samsung.da.value": [
+              "11",
+              "0"
+            ]
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.description": "Sensor for FineDust",
+            "x.com.samsung.da.type": "FineDust",
+            "x.com.samsung.da.value": [
+              "9",
+              "0"
+            ]
+          },
+          {
+            "x.com.samsung.da.id": "2",
+            "x.com.samsung.da.description": "Sensor for Odor",
+            "x.com.samsung.da.type": "Odor",
+            "x.com.samsung.da.value": [
+              "0"
+            ]
+          },
+          {
+            "x.com.samsung.da.id": "3",
+            "x.com.samsung.da.description": "Sensor for CleanLevel",
+            "x.com.samsung.da.type": "CleanLevel",
+            "x.com.samsung.da.value": [
+              "0"
+            ]
+          },
+          {
+            "x.com.samsung.da.id": "4",
+            "x.com.samsung.da.description": "Sensor for SuperFineDust",
+            "x.com.samsung.da.type": "SuperFineDust",
+            "x.com.samsung.da.value": [
+              "5",
+              "0"
+            ]
+          }
+        ]
+      }
+    }
+  ]
+}

tests/fixtures/airconditioner_caww_tp2_device.json

@@ -0,0 +1,486 @@
+{
+  "device0": [
+    {
+      "rt": [
+        "x.com.samsung.devcol",
+        "oic.wk.col"
+      ],
+      "if": [
+        "oic.if.baseline",
+        "oic.if.ll",
+        "oic.if.b"
+      ]
+    },
+    {
+      "href": "/aisleep/vs/0",
+      "rep": {
+        "x.com.samsung.da.displayNightMode": "Off",
+        "x.com.samsung.da.elapsedTime": "0",
+        "x.com.samsung.da.requestFeedback": "Off",
+        "x.com.samsung.da.resultFeedback": "0",
+        "x.com.samsung.da.statusFeedback": "Idle",
+        "x.com.samsung.da.sleepTime": "14002200",
+        "x.com.samsung.da.sleepMode": "Off"
+      }
+    },
+    {
+      "href": "/alarms/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Alarm",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "ErrorCode_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-23T05:13:21",
+            "x.com.samsung.da.state": "Deleted"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.description": "Alarm",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "FilterAlarm_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-23T05:13:21",
+            "x.com.samsung.da.state": "Deleted"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/availablecontrolsets/vs/0",
+      "rep": {
+        "x.com.samsung.da.sets": "000100B4012C0000120000000000",
+        "x.com.samsung.da.id": "CAC",
+        "x.com.samsung.da.version": "1.0"
+      }
+    },
+    {
+      "href": "/configuration/vs/0",
+      "rep": {
+        "x.com.samsung.da.region": "4131000000",
+        "x.com.samsung.da.airconOptionList": [
+          "DR",
+          "SingleCommand_1.0",
+          "AI_2.0"
+        ]
+      }
+    },
+    {
+      "href": "/diagnosis/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/drlc/vs/0",
+      "rep": {
+        "x.com.samsung.da.drlcLevel": "0",
+        "x.com.samsung.da.durationminutes": "0",
+        "x.com.samsung.da.start": "1970-01-01T00:00:00Z",
+        "x.com.samsung.da.override": "Off",
+        "x.com.samsung.da.realSaving": "Off"
+      }
+    },
+    {
+      "href": "/energy/consumption/vs/0",
+      "rep": {
+        "x.com.samsung.da.instantaneousPower": "153.000000",
+        "x.com.samsung.da.cumulativePower": "239209",
+        "x.com.samsung.da.cumulativeSavedPower": "7201",
+        "x.com.samsung.da.cumulativeUnit": "Wh",
+        "x.com.samsung.da.instantaneousPowerUnit": "W",
+        "x.com.samsung.da.cumulativePowerType": "total",
+        "x.com.samsung.da.saveLocation": "/mnt/usage.db"
+      }
+    },
+    {
+      "href": "/file/information/vs/0",
+      "rep": {
+        "x.com.samsung.timeoffset": "+09:00",
+        "x.com.samsung.supprtedtype": 1
+      }
+    },
+    {
+      "href": "/filter/airdustfilter/vs/0",
+      "rep": {
+        "x.com.samsung.da.filterUsage": "85",
+        "x.com.samsung.da.filterUsageResolution": "1",
+        "x.com.samsung.da.filterStatus": "normal",
+        "x.com.samsung.da.filterCapacity": "1000",
+        "x.com.samsung.da.filterCapacityUnit": "Hour",
+        "x.com.samsung.da.filterResetType": [
+          "replaceable",
+          "washable"
+        ]
+      }
+    },
+    {
+      "href": "/humidity/vs/0",
+      "rep": {
+        "x.com.samsung.da.humidity": "0.000000",
+        "x.com.samsung.da.fivepercentHumidity": "83"
+      }
+    },
+    {
+      "href": "/information/vs/0",
+      "rep": {
+        "x.com.samsung.da.modelNum": "A-CAWW-TP2-20-COMMON|10241941|600301170016110B40000F2000F2AD00",
+        "x.com.samsung.da.description": "A-CAWW-TP2-20-COMMON",
+        "x.com.samsung.da.serialNum": "**REDACTED**",
+        "x.com.samsung.da.otnDUID": "**REDACTED**",
+        "x.com.samsung.da.diagProtocolType": "WIFI_HTTPS",
+        "x.com.samsung.da.diagLogType": [
+          "errCode",
+          "dump"
+        ],
+        "x.com.samsung.da.diagDumpType": "file",
+        "x.com.samsung.da.diagEndPoint": "SSM",
+        "x.com.samsung.da.diagMnid": "0AJT",
+        "x.com.samsung.da.diagSetupid": "023",
+        "x.com.samsung.da.diagMinVersion": "1.0",
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Software",
+            "x.com.samsung.da.number": "02274A260512",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.number": "02419A25051901,FFFFFFFFFFFFFF",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "2",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Outdoor",
+            "x.com.samsung.da.number": "FFFFFFFFFFFFFF,FFFFFFFFFFFFFF"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/keepnormalstate/vs/0",
+      "rep": {
+        "x.com.samsung.da.keepnormal": 0
+      }
+    },
+    {
+      "href": "/mode/convenient/vs/0",
+      "rep": {
+        "x.com.samsung.da.modes": "Off",
+        "x.com.samsung.da.supportedModes": [
+          "Off",
+          "Nano",
+          "LongWind",
+          "Speed",
+          "Sleep",
+          "NanoSleep"
+        ]
+      }
+    },
+    {
+      "href": "/mode/vs/0",
+      "rep": {
+        "x.com.samsung.da.workingMode": "Auto",
+        "x.com.samsung.da.supportedModes": [
+          "Auto",
+          "Cool",
+          "Dry",
+          "Fan",
+          "AIComfort"
+        ],
+        "x.com.samsung.da.modes": [
+          "Auto"
+        ],
+        "x.com.samsung.da.options": [
+          "Sleep_0",
+          "ArtificialWorking_Off",
+          "ComfortAICooling_Off",
+          "AiTempChanged_Off",
+          "AiTemp_240",
+          "OutdoorTemp_82",
+          "Light_Off",
+          "Volume_100",
+          "KeyInputPermit_On",
+          "ModePermit_NoLimit",
+          "UpdateAllow_NotAllowed",
+          "DurationOn_419",
+          "WelcomeCoolingState_Off"
+        ]
+      }
+    },
+    {
+      "href": "/option/autoclean/vs/0",
+      "rep": {
+        "x.com.samsung.da.status": "Stop",
+        "x.com.samsung.da.settingStatus": "On",
+        "x.com.samsung.da.progress": "0",
+        "x.com.samsung.da.supportedStatus": [
+          "Start",
+          "Stop"
+        ],
+        "x.com.samsung.da.supportedSettingStatus": [
+          "On",
+          "Off"
+        ]
+      }
+    },
+    {
+      "href": "/option/muteonce/vs/0",
+      "rep": {
+        "muteonce": "Off"
+      }
+    },
+    {
+      "href": "/otninformation/vs/0",
+      "rep": {
+        "x.com.samsung.da.target": "",
+        "x.com.samsung.da.newVersionAvailable": "false",
+        "x.com.samsung.da.newVersionNo": "00000000",
+        "x.com.samsung.da.currentVersionInfo": "00000000",
+        "otnStatus": "None",
+        "flashingProgress": "",
+        "otnTarget": "main",
+        "otnCompleteDate": "noHistory",
+        "otnList": [
+          {
+            "type": "WIFI",
+            "modelId": "A-CAWW-TP2-20-COMMON",
+            "versions": [
+              "14260512"
+            ],
+            "visVersion": "260512"
+          },
+          {
+            "type": "Micom",
+            "modelId": "040010241941FFFFFFFF",
+            "versions": [
+              "25051901",
+              "FFFFFFFF"
+            ],
+            "visVersion": "250519"
+          },
+          {
+            "type": "Micom",
+            "modelId": "0400FFFFFFFFFFFFFFFF",
+            "versions": [
+              "FFFFFFFF",
+              "FFFFFFFF"
+            ],
+            "visVersion": ""
+          }
+        ]
+      }
+    },
+    {
+      "href": "/power/vs/0",
+      "rep": {
+        "x.com.samsung.da.power": "Off"
+      }
+    },
+    {
+      "href": "/realtimenotiforclient/vs/0",
+      "rep": {
+        "x.com.samsung.da.timeforshortnoti": "0",
+        "x.com.samsung.da.longnotisubscription": "true",
+        "x.com.samsung.da.periodicnotisubscription": "true"
+      }
+    },
+    {
+      "href": "/reserverulesets/vs/0",
+      "rep": {
+        "x.com.samsung.da.sets": "1F121E121E121E121EFFFFFFFF010001000F0001000E0000001C",
+        "x.com.samsung.da.id": "CAC",
+        "x.com.samsung.da.version": "1.0"
+      }
+    },
+    {
+      "href": "/sac/installationinfo/vs/0",
+      "rep": {
+        "installationOptions": [
+          {
+            "id": "0",
+            "option": "17444980C80171700010"
+          },
+          {
+            "id": "1",
+            "option": "28010000000000000100"
+          },
+          {
+            "id": "2",
+            "option": "50000000000000000000"
+          },
+          {
+            "id": "3",
+            "option": "30000000000000000000"
+          }
+        ],
+        "installationDeviceNum": [
+          {
+            "id": "0",
+            "number": "01"
+          },
+          {
+            "id": "1",
+            "number": "04"
+          },
+          {
+            "id": "2",
+            "number": "00"
+          }
+        ],
+        "outdoorInfo": [
+          {
+            "id": "0",
+            "info": "01900A230418",
+            "serial": "**REDACTED**"
+          },
+          {
+            "id": "1",
+            "info": "000000000000",
+            "serial": "**REDACTED**"
+          },
+          {
+            "id": "2",
+            "info": "000000000000",
+            "serial": "**REDACTED**"
+          },
+          {
+            "id": "3",
+            "info": "000000000000",
+            "serial": "**REDACTED**"
+          }
+        ],
+        "mcuInfo": [
+          {
+            "id": "0",
+            "info": ""
+          },
+          {
+            "id": "1",
+            "info": ""
+          },
+          {
+            "id": "2",
+            "info": ""
+          },
+          {
+            "id": "3",
+            "info": ""
+          },
+          {
+            "id": "4",
+            "info": ""
+          },
+          {
+            "id": "5",
+            "info": ""
+          },
+          {
+            "id": "6",
+            "info": ""
+          },
+          {
+            "id": "7",
+            "info": ""
+          },
+          {
+            "id": "8",
+            "info": ""
+          },
+          {
+            "id": "9",
+            "info": ""
+          },
+          {
+            "id": "10",
+            "info": ""
+          },
+          {
+            "id": "11",
+            "info": ""
+          },
+          {
+            "id": "12",
+            "info": ""
+          },
+          {
+            "id": "13",
+            "info": ""
+          },
+          {
+            "id": "14",
+            "info": ""
+          },
+          {
+            "id": "15",
+            "info": ""
+          }
+        ]
+      }
+    },
+    {
+      "href": "/temperature/control/vs/0",
+      "rep": {
+        "x.com.samsung.da.increment": "0.5"
+      }
+    },
+    {
+      "href": "/temperatures/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Temperature",
+            "x.com.samsung.da.desired": "27.0",
+            "x.com.samsung.da.current": "29.0",
+            "x.com.samsung.da.maximum": "30",
+            "x.com.samsung.da.minimum": "18",
+            "x.com.samsung.da.increment": "0.5",
+            "x.com.samsung.da.unit": "Celsius"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/timezone/vs/0",
+      "rep": {
+        "timezoneid": "Asia/Seoul",
+        "offset": "+09:00",
+        "DST": "OFF"
+      }
+    },
+    {
+      "href": "/wind/direction/vs/0",
+      "rep": {
+        "x.com.samsung.da.modes": "Fix",
+        "x.com.samsung.da.supportedModes": [
+          "Up_And_Low",
+          "Fix",
+          "Left_And_Right",
+          "All"
+        ]
+      }
+    },
+    {
+      "href": "/wind/strength/vs/0",
+      "rep": {
+        "x.com.samsung.da.modes": "0",
+        "x.com.samsung.da.supportedModes": [
+          "0",
+          "1",
+          "2",
+          "3"
+        ],
+        "x.com.samsung.da.modesName": [
+          "Auto",
+          "Low",
+          "Mid",
+          "High"
+        ]
+      }
+    }
+  ]
+}

tests/fixtures/airconditioner_tp1x_da_ac_rac_01011_device.json

@@ -0,0 +1,595 @@
+{
+  "meta": {
+    "note": "Samsung Room A/C, model TP1X_DA-AC-RAC-01011 (oneUiVersion '7.0 Air conditioner', Tizen Lite). Scrubbed real /device/0 dump. Adds temperature via /temperatures/vs/0 + display light. Issue #17 (newer model class).",
+    "issue": 17,
+    "model": "TP1X_DA-AC-RAC-01011",
+    "oneUiVersion": "7.0 Air conditioner"
+  },
+  "device0": [
+    {
+      "rt": [
+        "x.com.samsung.devcol",
+        "oic.wk.col"
+      ],
+      "if": [
+        "oic.if.baseline",
+        "oic.if.ll",
+        "oic.if.b"
+      ]
+    },
+    {
+      "href": "/airlevelcheck/vs/0",
+      "rep": {
+        "x.com.samsung.da.periodicSensingInterval": "1800",
+        "x.com.samsung.da.sensingState": "NonProcessing",
+        "x.com.samsung.da.lastSensingTime": "1784508715",
+        "x.com.samsung.da.lastSensingLevel": "Kr1",
+        "x.com.samsung.da.periodicSensingSkipStatus": "Off",
+        "x.com.samsung.da.periodicSensingSkipTime": "00000000",
+        "x.com.samsung.da.periodicSensingActivationState": "On",
+        "x.com.samsung.da.autoExeState": "Alarm",
+        "x.com.samsung.da.supportedAutoExeState": [
+          "Airpurify",
+          "Alarm",
+          "Sensing"
+        ],
+        "x.com.samsung.da.startSensingOnce": "Off",
+        "x.com.samsung.da.autoExeSetting": "Off",
+        "x.com.samsung.da.supportedAutoExeSetting": [
+          "On",
+          "Off"
+        ]
+      }
+    },
+    {
+      "href": "/aisleep/vs/0",
+      "rep": {
+        "x.com.samsung.da.displayNightMode": "Off",
+        "x.com.samsung.da.elapsedTime": "0",
+        "x.com.samsung.da.requestFeedback": "Off",
+        "x.com.samsung.da.resultFeedback": 0,
+        "x.com.samsung.da.statusFeedback": "Idle",
+        "x.com.samsung.da.sleepTime": "14002200"
+      }
+    },
+    {
+      "href": "/alarms/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.alarms"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ],
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "ErrorCode_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-22T07:13:19",
+            "x.com.samsung.da.state": "Deleted"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "FilterAlarm_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-22T07:13:19",
+            "x.com.samsung.da.state": "Deleted"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/availablecontrolsets/vs/0",
+      "rep": {
+        "x.com.samsung.da.sets": "000000A0012C016102490F0F0000",
+        "x.com.samsung.da.id": "RAC",
+        "x.com.samsung.da.version": "1.0"
+      }
+    },
+    {
+      "href": "/configuration/vs/0",
+      "rep": {
+        "x.com.samsung.da.region": "0000000000",
+        "x.com.samsung.da.airconOptionList": [
+          "PRODUCT_GLOBAL",
+          "AI_GLOBAL_HEATPUMP_4.0",
+          "AI_3.0",
+          "Auto_To_AI",
+          "AI_Heat",
+          "ENERGY_2.0",
+          "HOMECARE_WIZARD_V2",
+          "DR",
+          "SingleCommand_1"
+        ]
+      }
+    },
+    {
+      "href": "/da/softreset/vs/0",
+      "rep": {
+        "x.com.samsung.da.softwarereset": "false"
+      }
+    },
+    {
+      "href": "/drlc/vs/0",
+      "rep": {
+        "x.com.samsung.da.start": "1970-01-01T00:00:00Z",
+        "x.com.samsung.da.override": "Off",
+        "x.com.samsung.da.durationminutes": "0",
+        "x.com.samsung.da.drlcLevel": "0",
+        "x.com.samsung.da.realSaving": "Off"
+      }
+    },
+    {
+      "href": "/energy/consumption/vs/0",
+      "rep": {
+        "x.com.samsung.da.cumulativeDate": "1784704371",
+        "x.com.samsung.da.cumulativeSavedPower": "-1",
+        "x.com.samsung.da.cumulativePower": "75025",
+        "x.com.samsung.da.cumulativeUnit": "Wh",
+        "x.com.samsung.da.instantaneousPowerUnit": "W",
+        "x.com.samsung.da.cumulativePowerType": "total"
+      }
+    },
+    {
+      "href": "/file/information/vs/0",
+      "rep": {
+        "x.com.samsung.timeoffset": "+02:00",
+        "x.com.samsung.supprtedtype": 1
+      }
+    },
+    {
+      "href": "/filter/airdustfilter/vs/0",
+      "rep": {
+        "x.com.samsung.da.filterUsageResolution": "1",
+        "x.com.samsung.da.filterCapacity": "500",
+        "x.com.samsung.da.filterCapacityUnit": "Hour",
+        "x.com.samsung.da.filterResetType": [
+          "replaceable",
+          "washable"
+        ],
+        "x.com.samsung.da.filterStatus": "normal",
+        "x.com.samsung.da.filterUsage": "42",
+        "x.com.samsung.da.filterDesiredUsage": "500",
+        "x.com.samsung.da.supportedFilterDesiredUsage": [
+          "180",
+          "300",
+          "500",
+          "700"
+        ]
+      }
+    },
+    {
+      "href": "/humidity/vs/0",
+      "rep": {
+        "x.com.samsung.da.humidity": "0",
+        "x.com.samsung.da.fivepercentHumidity": "53"
+      }
+    },
+    {
+      "href": "/information/vs/0",
+      "rep": {
+        "x.com.samsung.da.otnDUID": "**REDACTED**",
+        "x.com.samsung.da.modelNum": "TP1X_DA-AC-RAC-01011_0000|10275643|60010523001911F58E0049320092E900",
+        "x.com.samsung.da.description": "TP1X_DA-AC-RAC-01011_0000",
+        "x.com.samsung.da.serialNum": "**REDACTED**",
+        "x.com.samsung.da.serialNumOption": "**REDACTED**",
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Software",
+            "x.com.samsung.da.number": "02762A260401",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.newVersionAvailable": "0",
+            "x.com.samsung.da.number": "02756C25082500,FFFFFFFFFFFFFF"
+          },
+          {
+            "x.com.samsung.da.id": "2",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.newVersionAvailable": "0",
+            "x.com.samsung.da.number": "02669A24092600,02636A10001200"
+          },
+          {
+            "x.com.samsung.da.id": "3",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.newVersionAvailable": "0",
+            "x.com.samsung.da.number": "02672A10001000,FFFFFFFFFFFFFF"
+          }
+        ],
+        "x.com.samsung.da.diagDumpType": "file",
+        "x.com.samsung.da.diagEndPoint": "SSM",
+        "x.com.samsung.da.diagLogType": [
+          "errCode",
+          "dump"
+        ],
+        "x.com.samsung.da.diagMnid": "0AJT",
+        "x.com.samsung.da.diagSetupid": "AR4",
+        "x.com.samsung.da.diagProtocolType": "BLE_OCF",
+        "x.com.samsung.da.diagMinVersion": "3.0",
+        "x.com.samsung.da.diagTsId": "DA01"
+      }
+    },
+    {
+      "href": "/keepnormalstate/vs/0",
+      "rep": {
+        "x.com.samsung.da.keepnormal": 1
+      }
+    },
+    {
+      "href": "/light/vs/0",
+      "rep": {
+        "mode": "On",
+        "supportedModes": [
+          "On",
+          "Off"
+        ]
+      }
+    },
+    {
+      "href": "/mds/absencemonitoring/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/mds/absencestate/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/mode/convenient/vs/0",
+      "rep": {
+        "x.com.samsung.da.modes": "Off",
+        "x.com.samsung.da.supportedModes": [
+          "Off",
+          "Sleep",
+          "Quiet",
+          "Smart",
+          "Speed",
+          "MotionIndirect",
+          "Nano",
+          "NanoSleep",
+          "DryComfort"
+        ]
+      }
+    },
+    {
+      "href": "/mode/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.mode"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ],
+        "x.com.samsung.da.modes": [
+          "Heat"
+        ],
+        "workingMode": "Heat",
+        "x.com.samsung.da.supportedModes": [
+          "Auto",
+          "Cool",
+          "Dry",
+          "Heat",
+          "Wind"
+        ],
+        "x.com.samsung.da.options": [
+          "OptionCode_56378",
+          "Sleep_6",
+          "ArtificialWorking_Off",
+          "Off",
+          "OutdoorTemp_68",
+          "OutdoorConnection_Connected"
+        ]
+      }
+    },
+    {
+      "href": "/option/airpurify/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.option.airpurify"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ],
+        "x.com.samsung.da.modes": "Off",
+        "x.com.samsung.da.supportedModes": [
+          "On",
+          "Off"
+        ]
+      }
+    },
+    {
+      "href": "/option/autoclean/vs/0",
+      "rep": {
+        "x.com.samsung.da.status": "Stop",
+        "x.com.samsung.da.supportedStatus": [
+          "Start",
+          "Stop"
+        ],
+        "x.com.samsung.da.progress": "0",
+        "x.com.samsung.da.settingStatus": "On",
+        "x.com.samsung.da.supportedSettingStatus": [
+          "On",
+          "Off"
+        ],
+        "defaultSettingStatus": "On"
+      }
+    },
+    {
+      "href": "/option/muteonce/vs/0",
+      "rep": {
+        "muteonce": "Off"
+      }
+    },
+    {
+      "href": "/personality/presence/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/power/vs/0",
+      "rep": {
+        "x.com.samsung.da.power": "Off",
+        "operationNumber": "39",
+        "displayCondition": "Enable"
+      }
+    },
+    {
+      "href": "/realtimenotiforclient/vs/0",
+      "rep": {
+        "x.com.samsung.da.timeforshortnoti": "0",
+        "x.com.samsung.da.longnotisubscription": "true",
+        "x.com.samsung.da.periodicnotisubscription": "true"
+      }
+    },
+    {
+      "href": "/remotedatacontrol/vs/0",
+      "rep": {
+        "x.com.samsung.da.status": "Off",
+        "x.com.samsung.da.connectionStatus": "Disconnected"
+      }
+    },
+    {
+      "href": "/remotetemperature/vs/0",
+      "rep": {
+        "x.com.samsung.da.temperature": "",
+        "x.com.samsung.da.unit": "",
+        "x.com.samsung.da.error": ""
+      }
+    },
+    {
+      "href": "/reserverulesets/vs/0",
+      "rep": {
+        "x.com.samsung.da.sets": "3EFFFFFFFF101E121EFFFF101EFFFF000001001F0001001F001F0000009CACFFFF0000",
+        "x.com.samsung.da.id": "RAC",
+        "x.com.samsung.da.version": "1.0"
+      }
+    },
+    {
+      "href": "/selfcheck/vs/0",
+      "rep": {
+        "x.com.samsung.da.start": "Cancel",
+        "x.com.samsung.da.status": "Ready",
+        "x.com.samsung.da.progress": "0",
+        "x.com.samsung.da.result": "NA",
+        "x.com.samsung.da.supportedActions": [
+          "Start",
+          "Cancel"
+        ],
+        "x.com.samsung.da.error": [
+          "DA_ERROR_NONE"
+        ]
+      }
+    },
+    {
+      "href": "/sensors/vs/0",
+      "rep": {
+        "x.com.samsung.da.cleanLevel": "1",
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Sensor for CleanLevel",
+            "x.com.samsung.da.type": "CleanLevel",
+            "x.com.samsung.da.value": [
+              "1"
+            ]
+          },
+          {
+            "x.com.samsung.da.id": "2",
+            "x.com.samsung.da.description": "Sensor for Dust",
+            "x.com.samsung.da.type": "Dust",
+            "x.com.samsung.da.value": [
+              "0",
+              "0"
+            ]
+          },
+          {
+            "x.com.samsung.da.id": "3",
+            "x.com.samsung.da.description": "Sensor for FineDust",
+            "x.com.samsung.da.type": "FineDust",
+            "x.com.samsung.da.value": [
+              "0",
+              "0"
+            ]
+          },
+          {
+            "x.com.samsung.da.id": "4",
+            "x.com.samsung.da.description": "Sensor for SuperFineDust",
+            "x.com.samsung.da.type": "SuperFineDust",
+            "x.com.samsung.da.value": [
+              "0",
+              "0"
+            ]
+          }
+        ]
+      }
+    },
+    {
+      "href": "/temperature/control/vs/0",
+      "rep": {
+        "x.com.samsung.da.increment": "1"
+      }
+    },
+    {
+      "href": "/temperatures/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Temperature",
+            "x.com.samsung.da.current": "17.0",
+            "x.com.samsung.da.desired": "25.0",
+            "x.com.samsung.da.minimum": "16",
+            "x.com.samsung.da.maximum": "30",
+            "x.com.samsung.da.increment": "1",
+            "x.com.samsung.da.unit": "Celsius"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/welcome/temperature/vs/0",
+      "rep": {
+        "operatingStatus": "None",
+        "requestId": "0000"
+      }
+    },
+    {
+      "href": "/wind/direction/vs/0",
+      "rep": {
+        "x.com.samsung.da.modes": "Fix",
+        "x.com.samsung.da.supportedModes": [
+          "Fix",
+          "Up_And_Low",
+          "Left_And_Right",
+          "All"
+        ]
+      }
+    },
+    {
+      "href": "/wind/strength/vs/0",
+      "rep": {
+        "x.com.samsung.da.modes": "0",
+        "x.com.samsung.da.supportedModes": [
+          "0",
+          "1",
+          "2",
+          "3",
+          "4"
+        ],
+        "x.com.samsung.da.modesName": [
+          "Auto",
+          "Low",
+          "Mid",
+          "High",
+          "Turbo"
+        ]
+      }
+    },
+    {
+      "href": "/otninformation/vs/0",
+      "rep": {
+        "x.com.samsung.da.target": "",
+        "x.com.samsung.da.newVersionAvailable": "false",
+        "otnStatus": "None",
+        "flashingProgress": "0",
+        "otnCompleteDate": "noHistory",
+        "scheduledTime": "None",
+        "swVersionInfo": {
+          "platform": "Tizen Lite",
+          "oneUiVersion": "7.0 Air conditioner",
+          "osVersion": "4.0"
+        },
+        "otnList": [
+          {
+            "type": "WIFI",
+            "modelId": "ARA-KR-TP1-25-ARXX00",
+            "versions": [
+              "11260401"
+            ],
+            "visVersion": "260401"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/timezone/vs/0",
+      "rep": {
+        "timezoneid": "Africa/Johannesburg",
+        "offset": "+02:00",
+        "DST": "OFF"
+      }
+    },
+    {
+      "href": "/connectionconfig/vs/0",
+      "rep": {
+        "autoReconnectionMinVersion": "1.0",
+        "autoReconnection": "true",
+        "autoReconnectionProtocolType": [
+          "helper_hotspot",
+          "ble_ocf"
+        ],
+        "supportedWiFiAuthType": [
+          "OPEN",
+          "WEP",
+          "WPA-PSK",
+          "WPA2-PSK",
+          "SAE"
+        ],
+        "supportedWiFiCryptoType": [
+          "TKIP",
+          "AES",
+          "WEP-64",
+          "WEP-128"
+        ],
+        "supportedWiFiFreq": [
+          "2.4G"
+        ],
+        "calmConnectionCare": {
+          "version": "1.0",
+          "role": [
+            "things"
+          ]
+        }
+      }
+    },
+    {
+      "href": "/wirelessinfo/vs/0",
+      "rep": {
+        "macaddressWiFi": "**REDACTED**",
+        "macaddressBLE": "**REDACTED**",
+        "connectedApSsid": "**REDACTED**"
+      }
+    },
+    {
+      "href": "/quickcontrol/info/vs/0",
+      "rep": {
+        "supportedVersion": "1.0"
+      }
+    },
+    {
+      "href": "/dginformation/vs/0",
+      "rep": {
+        "enrolmentstatus": "Unknown",
+        "devicestate": "Unknown",
+        "lockstatus": "Normal",
+        "nextduedate": "",
+        "workingminutes": 0,
+        "paymentinfo": {
+          "emiplan": "Unknown",
+          "currency": "Unknown",
+          "totalemi": 0,
+          "totalemipaid": 0
+        }
+      }
+    }
+  ]
+}

tests/fixtures/airconditioner_tp1x_rac_device.json

@@ -0,0 +1,591 @@
+{
+  "meta": {
+    "model": "TP1X_DA-AC-RAC-01001_0000",
+    "device_type": "airconditioner",
+    "source": "issue #38 diagnostics (scrubbed)",
+    "note": "Newer TP1X RAC board (oneUiVersion '7.0 Air conditioner') with a fuller resource set than the ARTIK051/TP2X boards: display light, self-check, mute-once, and a circuit-breaker current-limit setting."
+  },
+  "device0": [
+    {
+      "rt": [
+        "x.com.samsung.devcol",
+        "oic.wk.col"
+      ],
+      "if": [
+        "oic.if.baseline",
+        "oic.if.ll",
+        "oic.if.b"
+      ]
+    },
+    {
+      "href": "/aisleep/vs/0",
+      "rep": {
+        "x.com.samsung.da.displayNightMode": "Off",
+        "x.com.samsung.da.elapsedTime": "0",
+        "x.com.samsung.da.requestFeedback": "Off",
+        "x.com.samsung.da.resultFeedback": 0,
+        "x.com.samsung.da.statusFeedback": "Idle",
+        "x.com.samsung.da.sleepTime": "14002200"
+      }
+    },
+    {
+      "href": "/alarms/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.alarms"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ],
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "ErrorCode_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-22T12:58:00",
+            "x.com.samsung.da.state": "Deleted"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "FilterAlarm_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-22T12:58:00",
+            "x.com.samsung.da.state": "Deleted"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/availablecontrolsets/vs/0",
+      "rep": {
+        "x.com.samsung.da.sets": "AEB700A0012C01610248040F0000",
+        "x.com.samsung.da.id": "RAC",
+        "x.com.samsung.da.version": "1.0"
+      }
+    },
+    {
+      "href": "/configuration/vs/0",
+      "rep": {
+        "x.com.samsung.da.region": "0000000000",
+        "x.com.samsung.da.airconOptionList": [
+          "PRODUCT_GLOBAL",
+          "AI_GLOBAL_HEATPUMP_4.0",
+          "AI_3.0",
+          "Auto_To_AI",
+          "AI_Heat",
+          "ENERGY_2.0",
+          "HOMECARE_WIZARD_V2",
+          "DR",
+          "SingleCommand_1"
+        ]
+      }
+    },
+    {
+      "href": "/connectionconfig/vs/0",
+      "rep": {
+        "autoReconnectionMinVersion": "1.0",
+        "autoReconnection": "true",
+        "autoReconnectionProtocolType": [
+          "helper_hotspot",
+          "ble_ocf"
+        ],
+        "supportedWiFiAuthType": [
+          "OPEN",
+          "WEP",
+          "WPA-PSK",
+          "WPA2-PSK",
+          "SAE"
+        ],
+        "supportedWiFiCryptoType": [
+          "TKIP",
+          "AES",
+          "WEP-64",
+          "WEP-128"
+        ],
+        "supportedWiFiFreq": [
+          "2.4G"
+        ],
+        "calmConnectionCare": {
+          "version": "1.0",
+          "role": [
+            "things"
+          ]
+        }
+      }
+    },
+    {
+      "href": "/da/softreset/vs/0",
+      "rep": {
+        "x.com.samsung.da.softwarereset": "false"
+      }
+    },
+    {
+      "href": "/dginformation/vs/0",
+      "rep": {
+        "enrolmentstatus": "Unknown",
+        "devicestate": "Unknown",
+        "lockstatus": "Unknown",
+        "nextduedate": "",
+        "workingminutes": 0,
+        "paymentinfo": {
+          "emiplan": "Unknown",
+          "currency": "Unknown",
+          "totalemi": 0,
+          "totalemipaid": 0
+        }
+      }
+    },
+    {
+      "href": "/drlc/vs/0",
+      "rep": {
+        "x.com.samsung.da.start": "2026-07-22T10:59:14Z",
+        "x.com.samsung.da.override": "Off",
+        "x.com.samsung.da.durationminutes": "1148",
+        "x.com.samsung.da.drlcLevel": "1",
+        "x.com.samsung.da.realSaving": "Off"
+      }
+    },
+    {
+      "href": "/electriccurrent/vs/0",
+      "rep": {
+        "operation": "Off",
+        "modes": "3",
+        "supportedModes": [
+          "3",
+          "4",
+          "5",
+          "6",
+          "7",
+          "8",
+          "9"
+        ]
+      }
+    },
+    {
+      "href": "/energy/consumption/vs/0",
+      "rep": {
+        "x.com.samsung.da.cumulativeDate": "1784725078",
+        "x.com.samsung.da.cumulativeSavedPower": "-1",
+        "x.com.samsung.da.cumulativePower": "160922",
+        "x.com.samsung.da.cumulativeUnit": "Wh",
+        "x.com.samsung.da.instantaneousPowerUnit": "W",
+        "x.com.samsung.da.cumulativePowerType": "total"
+      }
+    },
+    {
+      "href": "/file/information/vs/0",
+      "rep": {
+        "x.com.samsung.timeoffset": "+03:00",
+        "x.com.samsung.supprtedtype": 1
+      }
+    },
+    {
+      "href": "/filter/airdustfilter/vs/0",
+      "rep": {
+        "x.com.samsung.da.filterUsageResolution": "1",
+        "x.com.samsung.da.filterCapacity": "500",
+        "x.com.samsung.da.filterCapacityUnit": "Hour",
+        "x.com.samsung.da.filterResetType": [
+          "replaceable",
+          "washable"
+        ],
+        "x.com.samsung.da.filterStatus": "normal",
+        "x.com.samsung.da.filterUsage": "30",
+        "x.com.samsung.da.filterDesiredUsage": "500",
+        "x.com.samsung.da.supportedFilterDesiredUsage": [
+          "180",
+          "300",
+          "500",
+          "700"
+        ]
+      }
+    },
+    {
+      "href": "/information/vs/0",
+      "rep": {
+        "x.com.samsung.da.otnDUID": "**REDACTED**",
+        "x.com.samsung.da.modelNum": "TP1X_DA-AC-RAC-01001_0000|10267841|60010532001911000E0041220090A000",
+        "x.com.samsung.da.description": "TP1X_DA-AC-RAC-01001_0000",
+        "x.com.samsung.da.serialNum": "**REDACTED**",
+        "x.com.samsung.da.serialNumOption": "**REDACTED**",
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Software",
+            "x.com.samsung.da.number": "02762A260401",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.newVersionAvailable": "0",
+            "x.com.samsung.da.number": "02678A24092500,FFFFFFFFFFFFFF"
+          },
+          {
+            "x.com.samsung.da.id": "2",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.newVersionAvailable": "0",
+            "x.com.samsung.da.number": "02669A24092600,02636A10001200"
+          },
+          {
+            "x.com.samsung.da.id": "3",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.newVersionAvailable": "0",
+            "x.com.samsung.da.number": "02672A10001000,FFFFFFFFFFFFFF"
+          }
+        ],
+        "x.com.samsung.da.diagDumpType": "file",
+        "x.com.samsung.da.diagEndPoint": "SSM",
+        "x.com.samsung.da.diagLogType": [
+          "errCode",
+          "dump"
+        ],
+        "x.com.samsung.da.diagMnid": "0AJT",
+        "x.com.samsung.da.diagSetupid": "AR2",
+        "x.com.samsung.da.diagProtocolType": "BLE_OCF",
+        "x.com.samsung.da.diagMinVersion": "3.0",
+        "x.com.samsung.da.diagTsId": "DA01"
+      }
+    },
+    {
+      "href": "/keepnormalstate/vs/0",
+      "rep": {
+        "x.com.samsung.da.keepnormal": 1
+      }
+    },
+    {
+      "href": "/light/vs/0",
+      "rep": {
+        "mode": "On",
+        "supportedModes": [
+          "On",
+          "Off"
+        ]
+      }
+    },
+    {
+      "href": "/mds/absencemonitoring/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/mds/absencestate/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/mode/convenient/vs/0",
+      "rep": {
+        "x.com.samsung.da.modes": "Off",
+        "x.com.samsung.da.supportedModes": [
+          "Off",
+          "Sleep",
+          "Quiet",
+          "Smart",
+          "Speed"
+        ]
+      }
+    },
+    {
+      "href": "/mode/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.mode"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ],
+        "x.com.samsung.da.modes": [
+          "Cool"
+        ],
+        "workingMode": "Cool",
+        "x.com.samsung.da.supportedModes": [
+          "Auto",
+          "Cool",
+          "Dry",
+          "Fan",
+          "Heat"
+        ],
+        "x.com.samsung.da.options": [
+          "OptionCode_54328",
+          "Sleep_0",
+          "ArtificialWorking_Off",
+          "ComfortAICooling_Off",
+          "AiTempChanged_Off",
+          "AiTemp_240",
+          "Volume_100",
+          "StopAutoClean_Idle",
+          "DiagnosisAI_Off",
+          "ProgressDiagnosisAI_0",
+          "ResultDiagnosisAI_Normal",
+          "ExtendOptionCode_230024",
+          "UpdateAllow_NotAllowed",
+          "DurationOn_120",
+          "OutdoorTemp_92",
+          "CoolCapa_50",
+          "WarmCapa_60",
+          "Autoclean_Off",
+          "WelcomeCoolingState_Off",
+          "WelcomeHeatingState_Off",
+          "OutdoorConnection_Connected"
+        ]
+      }
+    },
+    {
+      "href": "/option/airpurify/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.option.airpurify"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ],
+        "x.com.samsung.da.modes": "Off",
+        "x.com.samsung.da.supportedModes": [
+          "On",
+          "Off"
+        ]
+      }
+    },
+    {
+      "href": "/option/autoclean/vs/0",
+      "rep": {
+        "x.com.samsung.da.status": "Stop",
+        "x.com.samsung.da.supportedStatus": [
+          "Start",
+          "Stop"
+        ],
+        "x.com.samsung.da.progress": "0",
+        "x.com.samsung.da.settingStatus": "Off",
+        "x.com.samsung.da.supportedSettingStatus": [
+          "On",
+          "Off"
+        ]
+      }
+    },
+    {
+      "href": "/option/muteonce/vs/0",
+      "rep": {
+        "muteonce": "Off"
+      }
+    },
+    {
+      "href": "/otninformation/vs/0",
+      "rep": {
+        "x.com.samsung.da.target": "",
+        "x.com.samsung.da.newVersionAvailable": "false",
+        "otnStatus": "None",
+        "flashingProgress": "0",
+        "otnCompleteDate": "noHistory",
+        "scheduledTime": "None",
+        "swVersionInfo": {
+          "platform": "Tizen Lite",
+          "oneUiVersion": "7.0 Air conditioner",
+          "osVersion": "4.0"
+        },
+        "otnList": [
+          {
+            "type": "WIFI",
+            "modelId": "ARA-KR-TP1-25-ARXX00",
+            "versions": [
+              "11260401"
+            ],
+            "visVersion": "260401"
+          },
+          {
+            "type": "Micom",
+            "modelId": "845210267841FFFFFFFF",
+            "versions": [
+              "24092500",
+              "FFFFFFFF"
+            ],
+            "visVersion": "240925"
+          },
+          {
+            "type": "Micom",
+            "modelId": "045210267841FFFFFFFF",
+            "versions": [
+              "24092500",
+              "FFFFFFFF"
+            ],
+            "visVersion": "240925"
+          },
+          {
+            "type": "Micom",
+            "modelId": "04521026694110263641",
+            "versions": [
+              "24092600",
+              "10001200"
+            ],
+            "visVersion": "240926"
+          },
+          {
+            "type": "Micom",
+            "modelId": "FGCAN3",
+            "versions": [
+              "",
+              ""
+            ],
+            "visVersion": "999999"
+          },
+          {
+            "type": "Micom",
+            "modelId": "845210266941FFFFFFFF",
+            "versions": [
+              "24092600",
+              "FFFFFFFF"
+            ],
+            "visVersion": "240926"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/personality/presence/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/power/vs/0",
+      "rep": {
+        "x.com.samsung.da.power": "On",
+        "operationNumber": "9"
+      }
+    },
+    {
+      "href": "/quickcontrol/info/vs/0",
+      "rep": {
+        "supportedVersion": "1.0"
+      }
+    },
+    {
+      "href": "/realtimenotiforclient/vs/0",
+      "rep": {
+        "x.com.samsung.da.timeforshortnoti": "0",
+        "x.com.samsung.da.longnotisubscription": "false",
+        "x.com.samsung.da.periodicnotisubscription": "true"
+      }
+    },
+    {
+      "href": "/remotedatacontrol/vs/0",
+      "rep": {
+        "x.com.samsung.da.status": "Off",
+        "x.com.samsung.da.connectionStatus": "Disconnected"
+      }
+    },
+    {
+      "href": "/remotetemperature/vs/0",
+      "rep": {
+        "x.com.samsung.da.temperature": "",
+        "x.com.samsung.da.unit": "",
+        "x.com.samsung.da.error": ""
+      }
+    },
+    {
+      "href": "/reserverulesets/vs/0",
+      "rep": {
+        "x.com.samsung.da.sets": "AEFFFFFFFF101E121EFFFF101EFFFF000001001F00010000001F0000000000FFFF1E00",
+        "x.com.samsung.da.id": "RAC",
+        "x.com.samsung.da.version": "1.0"
+      }
+    },
+    {
+      "href": "/selfcheck/vs/0",
+      "rep": {
+        "x.com.samsung.da.start": "Cancel",
+        "x.com.samsung.da.status": "Ready",
+        "x.com.samsung.da.progress": "0",
+        "x.com.samsung.da.result": "NA",
+        "x.com.samsung.da.supportedActions": [
+          "Start",
+          "Cancel"
+        ],
+        "x.com.samsung.da.error": [
+          "DA_ERROR_NONE"
+        ]
+      }
+    },
+    {
+      "href": "/temperature/control/vs/0",
+      "rep": {
+        "x.com.samsung.da.increment": "1"
+      }
+    },
+    {
+      "href": "/temperatures/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Temperature",
+            "x.com.samsung.da.current": "26.0",
+            "x.com.samsung.da.desired": "22.0",
+            "x.com.samsung.da.minimum": "16",
+            "x.com.samsung.da.maximum": "30",
+            "x.com.samsung.da.increment": "1",
+            "x.com.samsung.da.unit": "Celsius"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/timezone/vs/0",
+      "rep": {
+        "timezoneid": "Asia/Amman",
+        "offset": "+03:00",
+        "DST": "OFF"
+      }
+    },
+    {
+      "href": "/welcome/temperature/vs/0",
+      "rep": {
+        "operatingStatus": "None",
+        "requestId": "0000"
+      }
+    },
+    {
+      "href": "/wind/direction/vs/0",
+      "rep": {
+        "x.com.samsung.da.modes": "All",
+        "x.com.samsung.da.supportedModes": [
+          "Fix",
+          "Up_And_Low",
+          "Left_And_Right",
+          "All"
+        ]
+      }
+    },
+    {
+      "href": "/wind/strength/vs/0",
+      "rep": {
+        "x.com.samsung.da.modes": "1",
+        "x.com.samsung.da.supportedModes": [
+          "0",
+          "1",
+          "2",
+          "3",
+          "4"
+        ],
+        "x.com.samsung.da.modesName": [
+          "Auto",
+          "Low",
+          "Mid",
+          "High",
+          "Turbo"
+        ]
+      }
+    },
+    {
+      "href": "/wirelessinfo/vs/0",
+      "rep": {
+        "macaddressWiFi": "**REDACTED**",
+        "macaddressBLE": "**REDACTED**",
+        "connectedApSsid": "**REDACTED**"
+      }
+    }
+  ]
+}

tests/fixtures/airconditioner_tp2x_rac_20k_device.json

@@ -0,0 +1,380 @@
+{
+  "meta": {
+    "model": "TP2X_RAC_20K",
+    "device_type": "airconditioner",
+    "source": "issue #37 diagnostics (scrubbed)",
+    "note": "Older/simpler RAC board reporting no oneUiVersion -- resolved via the '_RAC_' modelNum token fallback in for_device_by_model (unlike issue #38's TP1X board, which self-reports oneUiVersion)."
+  },
+  "device0": [
+    {
+      "rt": [
+        "x.com.samsung.devcol",
+        "oic.wk.col"
+      ],
+      "if": [
+        "oic.if.baseline",
+        "oic.if.ll",
+        "oic.if.b"
+      ]
+    },
+    {
+      "href": "/alarms/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Alarm",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "ErrorCode_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-22T12:42:46",
+            "x.com.samsung.da.state": "Deleted"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.description": "Alarm",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "FilterAlarm_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-22T12:42:46",
+            "x.com.samsung.da.state": "Deleted"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/availablecontrolsets/vs/0",
+      "rep": {
+        "x.com.samsung.da.sets": "000000A0012C01610249040F0000",
+        "x.com.samsung.da.id": "RAC",
+        "x.com.samsung.da.version": "1.0"
+      }
+    },
+    {
+      "href": "/configuration/vs/0",
+      "rep": {
+        "x.com.samsung.da.region": "0000000000",
+        "x.com.samsung.da.airconOptionList": [
+          "SingleCommand_1",
+          "HOMECARE_WIZARD_V2",
+          "PRODUCT_GLOBAL",
+          "AI_RAC_GLOBAL_HEATPUMP_3.0",
+          "AI_3.0",
+          "Auto_To_AI",
+          "AI_Heat"
+        ]
+      }
+    },
+    {
+      "href": "/energy/consumption/0",
+      "rep": {
+        "power": 0.0
+      }
+    },
+    {
+      "href": "/energy/consumption/vs/0",
+      "rep": {
+        "x.com.samsung.da.instantaneousPower": "0.000000",
+        "x.com.samsung.da.cumulativePower": "717060",
+        "x.com.samsung.da.cumulativeUnit": "Wh",
+        "x.com.samsung.da.cumulativePowerType": "total",
+        "x.com.samsung.da.instantaneousPowerUnit": "W"
+      }
+    },
+    {
+      "href": "/file/information/vs/0",
+      "rep": {
+        "x.com.samsung.timeoffset": "+03:00",
+        "x.com.samsung.supprtedtype": 1
+      }
+    },
+    {
+      "href": "/filter/airdustfilter/vs/0",
+      "rep": {
+        "x.com.samsung.da.filterUsage": "39",
+        "x.com.samsung.da.filterUsageResolution": "1",
+        "x.com.samsung.da.filterDesiredUsage": "500",
+        "x.com.samsung.da.filterStatus": "normal",
+        "x.com.samsung.da.filterCapacity": "500",
+        "x.com.samsung.da.filterCapacityUnit": "Hour",
+        "x.com.samsung.da.filterResetType": [
+          "replaceable",
+          "washable"
+        ]
+      }
+    },
+    {
+      "href": "/humidity/vs/0",
+      "rep": {
+        "x.com.samsung.da.humidity": "0",
+        "x.com.samsung.da.fivepercentHumidity": "43"
+      }
+    },
+    {
+      "href": "/information/vs/0",
+      "rep": {
+        "x.com.samsung.da.modelNum": "TP2X_RAC_20K|10229641|60010523001511014600003200800000",
+        "x.com.samsung.da.description": "TP2X_RAC_20K",
+        "x.com.samsung.da.serialNum": "**REDACTED**",
+        "x.com.samsung.da.otnDUID": "**REDACTED**",
+        "x.com.samsung.da.diagProtocolType": "WIFI_HTTPS",
+        "x.com.samsung.da.diagLogType": [
+          "errCode",
+          "dump"
+        ],
+        "x.com.samsung.da.diagDumpType": "file",
+        "x.com.samsung.da.diagEndPoint": "SSM",
+        "x.com.samsung.da.diagMnid": "0AJT",
+        "x.com.samsung.da.diagSetupid": "010",
+        "x.com.samsung.da.diagMinVersion": "1.0",
+        "x.com.samsung.da.serialNumOption": "**REDACTED**",
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Software",
+            "x.com.samsung.da.number": "02273A260324",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.number": "102296A23012700",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "2",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/keepnormalstate/vs/0",
+      "rep": {
+        "x.com.samsung.da.keepnormal": 0
+      }
+    },
+    {
+      "href": "/mode/convenient/vs/0",
+      "rep": {
+        "x.com.samsung.da.modes": "Off",
+        "x.com.samsung.da.supportedModes": [
+          "Off",
+          "Sleep",
+          "Quiet",
+          "Smart",
+          "Speed",
+          "MotionIndirect",
+          "MotionDirect",
+          "Nano",
+          "NanoSleep"
+        ]
+      }
+    },
+    {
+      "href": "/mode/vs/0",
+      "rep": {
+        "x.com.samsung.da.supportedModes": [
+          "Auto",
+          "Cool",
+          "Dry",
+          "Wind",
+          "Heat",
+          "HOMECARE_WIZARD_V2"
+        ],
+        "x.com.samsung.da.modes": [
+          "Cool"
+        ],
+        "x.com.samsung.da.options": [
+          "Sleep_16",
+          "ArtificialWorking_Off",
+          "ComfortAICooling_Off",
+          "MotionState_Normal",
+          "AiTempChanged_Off",
+          "AiTemp_240",
+          "OutdoorTemp_85",
+          "CoolCapa_35",
+          "WarmCapa_35",
+          "Light_Off",
+          "Volume_100",
+          "StopAutoClean_Idle",
+          "Autoclean_Off",
+          "DiagnosisAI_Off",
+          "ProgressDiagnosisAI_1",
+          "ResultDiagnosisAI_Normal",
+          "MotionMode_PowerSave",
+          "OptionCode_56376",
+          "ExtendOptionCode_230157",
+          "RacInfo_None",
+          "UpdateAllow_NotAllowed",
+          "DurationOn_50",
+          "WelcomeCoolingState_Off"
+        ]
+      }
+    },
+    {
+      "href": "/option/autoclean/vs/0",
+      "rep": {
+        "x.com.samsung.da.status": "Stop",
+        "x.com.samsung.da.settingStatus": "Off",
+        "x.com.samsung.da.progress": "0",
+        "x.com.samsung.da.supportedStatus": [
+          "Start",
+          "Stop"
+        ],
+        "x.com.samsung.da.supportedSettingStatus": [
+          "On",
+          "Off"
+        ]
+      }
+    },
+    {
+      "href": "/option/muteonce/vs/0",
+      "rep": {
+        "muteonce": "Off"
+      }
+    },
+    {
+      "href": "/otninformation/vs/0",
+      "rep": {
+        "x.com.samsung.da.target": "",
+        "x.com.samsung.da.newVersionAvailable": "false",
+        "x.com.samsung.da.newVersionNo": "00000000",
+        "x.com.samsung.da.currentVersionInfo": "00000000",
+        "otnStatus": "None",
+        "flashingProgress": "",
+        "otnTarget": "main",
+        "otnCompleteDate": "noHistory",
+        "otnList": [
+          {
+            "type": "WIFI",
+            "modelId": "TP2X_RAC_20K",
+            "versions": [
+              "11260324"
+            ],
+            "visVersion": "260324"
+          },
+          {
+            "type": "Micom",
+            "modelId": "045210229641FFFFFFFF",
+            "versions": [
+              "23012700",
+              "FFFFFFFF"
+            ],
+            "visVersion": "230127"
+          },
+          {
+            "type": "Micom",
+            "modelId": "04521022954110229941",
+            "versions": [
+              "21092700",
+              "10000300"
+            ],
+            "visVersion": "210927"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/personality/presence/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "",
+            "x.com.samsung.da.deviceId": "**REDACTED**",
+            "x.com.samsung.da.value": ""
+          }
+        ]
+      }
+    },
+    {
+      "href": "/power/0",
+      "rep": {
+        "value": false
+      }
+    },
+    {
+      "href": "/power/vs/0",
+      "rep": {
+        "x.com.samsung.da.power": "Off"
+      }
+    },
+    {
+      "href": "/realtimenotiforclient/vs/0",
+      "rep": {
+        "x.com.samsung.da.timeforshortnoti": "0",
+        "x.com.samsung.da.longnotisubscription": "false",
+        "x.com.samsung.da.periodicnotisubscription": "true"
+      }
+    },
+    {
+      "href": "/sensors/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/temperature/control/vs/0",
+      "rep": {
+        "x.com.samsung.da.increment": "1"
+      }
+    },
+    {
+      "href": "/temperatures/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Temperature",
+            "x.com.samsung.da.desired": "22.0",
+            "x.com.samsung.da.current": "26.0",
+            "x.com.samsung.da.maximum": "30",
+            "x.com.samsung.da.minimum": "16",
+            "x.com.samsung.da.increment": "1.0",
+            "x.com.samsung.da.unit": "Celsius"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/timezone/vs/0",
+      "rep": {
+        "timezoneid": "Asia/Amman",
+        "offset": "+03:00",
+        "DST": "OFF"
+      }
+    },
+    {
+      "href": "/wind/direction/vs/0",
+      "rep": {
+        "x.com.samsung.da.modes": "Left_And_Right",
+        "x.com.samsung.da.supportedModes": [
+          "Fix",
+          "All",
+          "Up_And_Low",
+          "Left_And_Right"
+        ]
+      }
+    },
+    {
+      "href": "/wind/strength/vs/0",
+      "rep": {
+        "x.com.samsung.da.modes": "2",
+        "x.com.samsung.da.supportedModes": [
+          "0",
+          "1",
+          "2",
+          "3",
+          "4"
+        ],
+        "x.com.samsung.da.modesName": [
+          "Auto",
+          "Low",
+          "Mid",
+          "High",
+          "Turbo"
+        ]
+      }
+    }
+  ]
+}

tests/fixtures/cooktop_device.json

@@ -0,0 +1,73 @@
+{
+  "device0": [
+    {
+      "rt": [
+        "x.com.samsung.devcol",
+        "oic.wk.col"
+      ],
+      "if": [
+        "oic.if.baseline",
+        "oic.if.ll",
+        "oic.if.b"
+      ]
+    },
+    {
+      "href": "/otninformation/vs/0",
+      "rep": {
+        "x.com.samsung.da.target": "",
+        "x.com.samsung.da.newVersionAvailable": "false"
+      }
+    },
+    {
+      "href": "/power/vs/0",
+      "rep": {
+        "x.com.samsung.da.power": "On"
+      }
+    },
+    {
+      "href": "/mode/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.mode"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ],
+        "x.com.samsung.da.options": [
+          "DeviceType_NA9300K-/AA1",
+          "MainTimerCurrent_0",
+          "MainTimerSet_0",
+          "MainTimerState_Ready",
+          "OperationState0_Ready",
+          "OperationState1_Ready",
+          "OperationState3_Ready",
+          "OperationState4_Ready",
+          "OperationState5_Ready"
+        ]
+      }
+    },
+    {
+      "href": "/connected/vs/0",
+      "rep": {
+        "x.com.samsung.da.connected": "On"
+      }
+    },
+    {
+      "href": "/configuration/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/bluetooth/hood/status/vs/0",
+      "rep": {
+        "connectionState": "disconnected",
+        "micomModelId": "",
+        "firmwareVersion": "",
+        "power": "off",
+        "fanSpeed": 0,
+        "lampState": "off",
+        "timer": {}
+      }
+    }
+  ]
+}

tests/fixtures/golden/air_purifier.json

@@ -0,0 +1,24 @@
+{
+  "state_keys": [
+    "alarm_code",
+    "clean_level",
+    "device_active",
+    "diagnosis_status",
+    "display_light",
+    "dust",
+    "energy_kwh",
+    "energy_last_month_kwh",
+    "energy_saved_kwh",
+    "energy_this_month_kwh",
+    "fan_direction",
+    "fan_speed_level",
+    "filter_progress",
+    "fine_dust",
+    "odor",
+    "operating_mode",
+    "power_energy_kwh",
+    "power_switch",
+    "power_watts",
+    "super_fine_dust"
+  ]
+}

tests/fixtures/golden/airconditioner_caww_tp2.json

@@ -0,0 +1,15 @@
+{
+  "state_keys": [
+    "air_filter_status",
+    "air_filter_usage",
+    "alarm_code",
+    "auto_clean",
+    "climate",
+    "diagnosis_status",
+    "energy_kwh",
+    "energy_saved_kwh",
+    "firmware_update",
+    "mute_once",
+    "power_watts"
+  ]
+}

tests/fixtures/golden/airconditioner_tp1x_da_ac_rac_01011.json

@@ -0,0 +1,18 @@
+{
+  "state_keys": [
+    "air_filter_status",
+    "air_filter_usage",
+    "air_purify",
+    "alarm_code",
+    "auto_clean",
+    "climate",
+    "display_light",
+    "energy_kwh",
+    "energy_saved_kwh",
+    "firmware_update",
+    "mute_once",
+    "selfcheck_error",
+    "selfcheck_result",
+    "selfcheck_status"
+  ]
+}

tests/fixtures/golden/airconditioner_tp1x_rac.json

@@ -0,0 +1,20 @@
+{
+  "state_keys": [
+    "air_filter_status",
+    "air_filter_usage",
+    "air_purify",
+    "alarm_code",
+    "auto_clean",
+    "climate",
+    "current_limit_enabled",
+    "current_limit_level",
+    "display_light",
+    "energy_kwh",
+    "energy_saved_kwh",
+    "firmware_update",
+    "mute_once",
+    "selfcheck_error",
+    "selfcheck_result",
+    "selfcheck_status"
+  ]
+}

tests/fixtures/golden/airconditioner_tp2x_rac_20k.json

@@ -0,0 +1,13 @@
+{
+  "state_keys": [
+    "air_filter_status",
+    "air_filter_usage",
+    "alarm_code",
+    "auto_clean",
+    "climate",
+    "energy_kwh",
+    "firmware_update",
+    "mute_once",
+    "power_watts"
+  ]
+}

tests/fixtures/golden/cooktop.json

@@ -0,0 +1,21 @@
+{
+  "state_keys": [
+    "any_burner_active",
+    "burner_0_state",
+    "burner_1_state",
+    "burner_3_state",
+    "burner_4_state",
+    "burner_5_state",
+    "cloud_connected",
+    "firmware_update",
+    "main_timer_current",
+    "main_timer_state",
+    "paired_hood_connected",
+    "paired_hood_fan_speed",
+    "paired_hood_firmware",
+    "paired_hood_light",
+    "paired_hood_model",
+    "paired_hood_power",
+    "power_state"
+  ]
+}

tests/fixtures/golden/dishwasher.json

@@ -3,6 +3,7 @@
     "alarm_code",
     "auto_release_dry",
     "child_lock",
+    "completion_minutes",
     "cycle",
     "cycle_active",
     "delay_start_hours",

tests/fixtures/golden/dryer.json

@@ -3,6 +3,7 @@
     "alarm_code",
     "buzzer_sound",
     "child_lock",
+    "completion_minutes",
     "cycle",
     "cycle_active",
     "delay_start_hours",

tests/fixtures/golden/oven.json

@@ -0,0 +1,25 @@
+{
+  "state_keys": [
+    "alarm_code",
+    "child_lock",
+    "cloud_connected",
+    "cook_time",
+    "current_temp_c",
+    "cycle_active",
+    "door_open",
+    "fast_preheat",
+    "finish_time",
+    "firmware_update",
+    "lamp",
+    "machine_state",
+    "natural_steam",
+    "operation_time_minutes",
+    "oven_mode",
+    "oven_setpoint",
+    "oven_state",
+    "power_switch",
+    "progress_percentage",
+    "remote_control",
+    "sound"
+  ]
+}

tests/fixtures/golden/range.json

@@ -0,0 +1,39 @@
+{
+  "state_keys": [
+    "alarm_code",
+    "burner_0_hot_surface",
+    "burner_0_power_level",
+    "burner_0_state",
+    "burner_1_hot_surface",
+    "burner_1_power_level",
+    "burner_1_state",
+    "burner_2_hot_surface",
+    "burner_2_power_level",
+    "burner_2_state",
+    "burner_3_hot_surface",
+    "burner_3_power_level",
+    "burner_3_state",
+    "child_lock",
+    "cloud_connected",
+    "cook_time",
+    "cooktop_safety_shutoff_enabled",
+    "cooktop_state",
+    "current_temp_c",
+    "cycle_active",
+    "door_open",
+    "fast_preheat",
+    "finish_time",
+    "firmware_update",
+    "lamp",
+    "machine_state",
+    "natural_steam",
+    "operation_time_minutes",
+    "oven_mode",
+    "oven_setpoint",
+    "oven_state",
+    "power_switch",
+    "progress_percentage",
+    "remote_control",
+    "sound"
+  ]
+}

tests/fixtures/golden/range_hood.json

@@ -0,0 +1,25 @@
+{
+  "state_keys": [
+    "air_sensing_state",
+    "alarm_code",
+    "auto_ventilation_action",
+    "automatic_operation",
+    "automatic_ventilation_state",
+    "clean_level",
+    "energy_kwh",
+    "energy_saved_kwh",
+    "fan",
+    "firmware_update",
+    "hood_filter_capacity",
+    "hood_filter_status",
+    "hood_filter_usage",
+    "lamp",
+    "lamp_brightness",
+    "last_air_sensing_level",
+    "last_air_sensing_time",
+    "periodic_air_sensing",
+    "dust",
+    "fine_dust",
+    "super_fine_dust"
+  ]
+}

tests/fixtures/golden/refrigerator.json

@@ -1,5 +1,6 @@
 {
   "state_keys": [
+    "ai_energy_level",
     "alarm_code",
     "auto_door_opener",
     "autofill",
@@ -39,11 +40,13 @@
     "rapid_freezing",
     "rapid_fridge",
     "sabbath_mode",
+    "selfcheck_error",
     "selfcheck_result",
     "selfcheck_status",
     "welcome_lighting"
   ],
   "discovery_unique_ids": [
+    "samsung_refrigerator_ai_energy_level",
     "samsung_refrigerator_alarm_code",
     "samsung_refrigerator_auto_door_opener",
     "samsung_refrigerator_autofill",
@@ -83,6 +86,7 @@
     "samsung_refrigerator_rapid_freezing",
     "samsung_refrigerator_rapid_fridge",
     "samsung_refrigerator_sabbath_mode",
+    "samsung_refrigerator_selfcheck_error",
     "samsung_refrigerator_selfcheck_result",
     "samsung_refrigerator_selfcheck_start",
     "samsung_refrigerator_selfcheck_status",

tests/fixtures/golden/refrigerator_tp1x_ref_21k_us.json

@@ -1,5 +1,6 @@
 {
   "state_keys": [
+    "ai_energy_level",
     "alarm_code",
     "autofill",
     "cooler_setpoint",
@@ -28,6 +29,7 @@
     "rapid_freezing",
     "rapid_fridge",
     "sabbath_mode",
+    "selfcheck_error",
     "selfcheck_result",
     "selfcheck_status"
   ]

tests/fixtures/golden/washer.json

@@ -1,8 +1,11 @@
 {
   "state_keys": [
+    "ai_energy_level",
     "alarm_code",
+    "bubble_soak",
     "buzzer_sound",
     "child_lock",
+    "completion_minutes",
     "cycle",
     "cycle_active",
     "delay_start_hours",
@@ -14,9 +17,11 @@
     "energy_saved_kwh",
     "finish_time",
     "firmware_update",
+    "intensive",
     "job_beginning_status",
     "machine_state",
     "power_switch",
+    "pre_wash",
     "progress",
     "progress_percentage",
     "remote_control",

tests/fixtures/golden/washer_dryer_combo.json

@@ -1,7 +1,9 @@
 {
   "state_keys": [
     "alarm_code",
+    "bubble_soak",
     "child_lock",
+    "completion_minutes",
     "cycle",
     "cycle_active",
     "delay_start_hours",
@@ -12,9 +14,11 @@
     "energy_kwh",
     "finish_time",
     "firmware_update",
+    "intensive",
     "job_beginning_status",
     "machine_state",
     "power_switch",
+    "pre_wash",
     "progress",
     "progress_percentage",
     "remote_control",

tests/fixtures/golden/washer_flexwash.json

@@ -2,6 +2,8 @@
   "state_keys": [
     "alarm_code",
     "child_lock",
+    "completion_minutes",
+    "cycle",
     "cycle_active",
     "delay_start_hours",
     "detergent_low",

tests/fixtures/oven_device.json

@@ -0,0 +1,289 @@
+{
+  "meta": {
+    "model": "TP1X_DA-KS-OVEN-0107X (NV7000BS/ET5)",
+    "device_type": "oven",
+    "source": "issue #55 diagnostics (scrubbed)",
+    "note": "Wall oven reports no oneUiVersion; resolved via the '-OVEN-' modelNum token fallback in for_device_by_model, mirroring the '-RANGE-' fallback added for issue #44."
+  },
+  "device0": [
+    {
+      "rt": [
+        "x.com.samsung.devcol",
+        "oic.wk.col"
+      ],
+      "if": [
+        "oic.if.baseline",
+        "oic.if.ll",
+        "oic.if.b"
+      ]
+    },
+    {
+      "href": "/otninformation/vs/0",
+      "rep": {
+        "x.com.samsung.da.target": "",
+        "x.com.samsung.da.newVersionAvailable": "false",
+        "flashingProgress": "",
+        "otnStatus": "None",
+        "otnList": [
+          {
+            "type": "WIFI",
+            "modelId": "AKS-WW-TP1-22-OVEN-1",
+            "versions": [
+              "40250221"
+            ],
+            "visVersion": "250221"
+          },
+          {
+            "type": "Micom",
+            "modelId": "07134046004140472641",
+            "versions": [
+              "23011700",
+              "23122000"
+            ],
+            "visVersion": "231220"
+          },
+          {
+            "type": "Micom",
+            "modelId": "071360127441FFFFFFFF",
+            "versions": [
+              "21123000",
+              "FFFFFFFF"
+            ],
+            "visVersion": "211230"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/connected/vs/0",
+      "rep": {
+        "x.com.samsung.da.connected": "On"
+      }
+    },
+    {
+      "href": "/doors/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Door",
+            "x.com.samsung.da.openState": "Close"
+          }
+        ],
+        "rt": [
+          "x.com.samsung.da.doors"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.s"
+        ]
+      }
+    },
+    {
+      "href": "/information/vs/0",
+      "rep": {
+        "x.com.samsung.da.modelNum": "TP1X_DA-KS-OVEN-0107X|40460041|50030018001611020A00000000000000",
+        "x.com.samsung.da.description": "NV7000BS/ET5",
+        "x.com.samsung.da.serialNum": "**REDACTED**",
+        "x.com.samsung.da.otnDUID": "**REDACTED**",
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Software",
+            "x.com.samsung.da.number": "25022100",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.number": "04600A23011700, 04726A23122000",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "2",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.number": "01274A21123000",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          }
+        ],
+        "x.com.samsung.da.diagProtocolType": "BLE_OCF",
+        "x.com.samsung.da.diagLogType": [
+          "errCode",
+          "dump"
+        ],
+        "x.com.samsung.da.diagDumpType": "file",
+        "x.com.samsung.da.diagEndPoint": "SSM",
+        "x.com.samsung.da.diagMnid": "0AJT",
+        "x.com.samsung.da.diagSetupid": "KV1",
+        "x.com.samsung.da.diagMinVersion": "3.0",
+        "x.com.samsung.da.diagTsId": "DA01"
+      }
+    },
+    {
+      "href": "/mode/vs/0",
+      "rep": {
+        "x.com.samsung.da.supportedModes": [
+          "Autocook",
+          "Convection",
+          "TopHeatPluseConvection",
+          "Conventional",
+          "LargeGrill",
+          "SmallGrill",
+          "BottomHeatPluseConvection",
+          "PlateWarm",
+          "KeepWarm",
+          "Bottom",
+          "EcoConvection",
+          "FanGrill",
+          "Defrost",
+          "SteamClean"
+        ],
+        "x.com.samsung.da.modes": [
+          "NoOperation"
+        ],
+        "x.com.samsung.da.options": [
+          "DeviceType_NV7000BS/ET5",
+          "UpperTimerCurrent_0",
+          "UpperTimerSet_0",
+          "UpperTimerState_Ready",
+          "UpperLamp_Off",
+          "Sound_On"
+        ],
+        "x.com.samsung.da.defaultMode": "Convection",
+        "rt": [
+          "x.com.samsung.da.mode"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ]
+      }
+    },
+    {
+      "href": "/operational/state/vs/0",
+      "rep": {
+        "x.com.samsung.da.state": "Ready",
+        "x.com.samsung.da.operationTime": "00:00:00",
+        "x.com.samsung.da.remainingTime": "00:00:00",
+        "x.com.samsung.da.progressPercentage": "0",
+        "rt": [
+          "x.com.samsung.da.operation"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ]
+      }
+    },
+    {
+      "href": "/alarms/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.alarms"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.s"
+        ],
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Alarm",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "OV_E_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-23T15:26:07"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/oven/vs/0",
+      "rep": {
+        "x.com.samsung.da.state": "Ready",
+        "x.com.samsung.da.recipe": "00000000000000",
+        "rt": [
+          "x.com.samsung.da.oven"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.s"
+        ]
+      }
+    },
+    {
+      "href": "/temperatures/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Temperature",
+            "x.com.samsung.da.desired": "0",
+            "x.com.samsung.da.current": "0",
+            "x.com.samsung.da.increment": "5",
+            "x.com.samsung.da.unit": "Celsius"
+          }
+        ],
+        "rt": [
+          "x.com.samsung.da.temperatures"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ]
+      }
+    },
+    {
+      "href": "/timezone/vs/0",
+      "rep": {
+        "timezoneid": "Europe/Rome",
+        "offset": "+02:00",
+        "DST": "ON"
+      }
+    },
+    {
+      "href": "/configuration/vs/0",
+      "rep": {}
+    },
+    {
+      "href": "/kidslock/vs/0",
+      "rep": {
+        "x.com.samsung.da.kidsLock": "Ready"
+      }
+    },
+    {
+      "href": "/power/vs/0",
+      "rep": {
+        "x.com.samsung.da.power": "On"
+      }
+    },
+    {
+      "href": "/remotectrl/vs/0",
+      "rep": {
+        "x.com.samsung.da.remoteControlEnabled": "true",
+        "rt": [
+          "x.com.samsung.da.configuration"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.s"
+        ]
+      }
+    },
+    {
+      "href": "/wirelessinfo/vs/0",
+      "rep": {
+        "macaddressWiFi": "**REDACTED**",
+        "macaddressBLE": "**REDACTED**"
+      }
+    },
+    {
+      "href": "/quickcontrol/info/vs/0",
+      "rep": {
+        "supportedVersion": "1.0"
+      }
+    }
+  ]
+}

tests/fixtures/range_device.json

@@ -0,0 +1,466 @@
+{
+  "meta": {
+    "model": "TP1X_DA-KS-RANGE-0102X (NSI6DG9100SRAA)",
+    "device_type": "range",
+    "source": "issue #44 diagnostics (scrubbed)",
+    "note": "Range/cooktop-oven combo, first dump of this device type. 4 burners reported (numberOfBurners=4)."
+  },
+  "device0": [
+    {
+      "rt": [
+        "x.com.samsung.devcol",
+        "oic.wk.col"
+      ],
+      "if": [
+        "oic.if.baseline",
+        "oic.if.ll",
+        "oic.if.b"
+      ]
+    },
+    {
+      "href": "/otninformation/vs/0",
+      "rep": {
+        "x.com.samsung.da.target": "",
+        "x.com.samsung.da.newVersionAvailable": "false",
+        "flashingProgress": "",
+        "otnStatus": "None",
+        "otnList": [
+          {
+            "type": "WIFI",
+            "modelId": "AKS-WW-TP1-23-OVEN-3",
+            "versions": [
+              "40241114"
+            ],
+            "visVersion": "241114"
+          },
+          {
+            "type": "Micom",
+            "modelId": "07174047694140477041",
+            "versions": [
+              "24052400",
+              "24012300"
+            ],
+            "visVersion": "240524"
+          },
+          {
+            "type": "Micom",
+            "modelId": "071760141141FFFFFFFF",
+            "versions": [
+              "24010500",
+              "FFFFFFFF"
+            ],
+            "visVersion": "240105"
+          },
+          {
+            "type": "Micom",
+            "modelId": "071740476841FFFFFFFF",
+            "versions": [
+              "23121600",
+              "FFFFFFFF"
+            ],
+            "visVersion": "231216"
+          },
+          {
+            "type": "Micom",
+            "modelId": "07174047484140474941",
+            "versions": [
+              "24020500",
+              "24012600"
+            ],
+            "visVersion": "240205"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/connected/vs/0",
+      "rep": {
+        "x.com.samsung.da.connected": "On"
+      }
+    },
+    {
+      "href": "/doors/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.doors"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.s"
+        ],
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Door",
+            "x.com.samsung.da.openState": "Close",
+            "x.com.samsung.da.lock": "Unlock"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/information/vs/0",
+      "rep": {
+        "x.com.samsung.da.modelNum": "TP1X_DA-KS-RANGE-0102X|40476941|5001011E041811010A00000000000000",
+        "x.com.samsung.da.description": "NI9100D-/AA0",
+        "x.com.samsung.da.serialNum": "**REDACTED**",
+        "x.com.samsung.da.otnDUID": "**REDACTED**",
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Software",
+            "x.com.samsung.da.number": "24111400",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.number": "04769A24052400, 04770A24012300",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "2",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.number": "01411A24010500",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "3",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.number": "04768A23121600",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          },
+          {
+            "x.com.samsung.da.id": "4",
+            "x.com.samsung.da.description": "Version",
+            "x.com.samsung.da.type": "Firmware",
+            "x.com.samsung.da.number": "04748A24020500, 04749A24012600",
+            "x.com.samsung.da.newVersionAvailable": "0"
+          }
+        ],
+        "x.com.samsung.da.diagProtocolType": "BLE_OCF",
+        "x.com.samsung.da.diagLogType": [
+          "errCode",
+          "dump"
+        ],
+        "x.com.samsung.da.diagDumpType": "file",
+        "x.com.samsung.da.diagEndPoint": "SSM",
+        "x.com.samsung.da.diagMnid": "0AJT",
+        "x.com.samsung.da.diagSetupid": "KR3",
+        "x.com.samsung.da.diagMinVersion": "3.0",
+        "x.com.samsung.da.diagTsId": "DA01"
+      }
+    },
+    {
+      "href": "/mode/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.mode"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ],
+        "x.com.samsung.da.supportedModes": [
+          "Bake",
+          "Broil",
+          "KeepWarm",
+          "BreadProof",
+          "SelfClean",
+          "SteamClean"
+        ],
+        "x.com.samsung.da.modes": [
+          "NoOperation"
+        ],
+        "x.com.samsung.da.modeStateList": [
+          {
+            "mode": "Bake",
+            "state": "Fixed"
+          },
+          {
+            "mode": "Broil",
+            "state": "Show"
+          },
+          {
+            "mode": "KeepWarm",
+            "state": "Show"
+          },
+          {
+            "mode": "BreadProof",
+            "state": "Show"
+          },
+          {
+            "mode": "SelfClean",
+            "state": "Fixed"
+          },
+          {
+            "mode": "SteamClean",
+            "state": "Fixed"
+          }
+        ],
+        "x.com.samsung.da.options": [
+          "DeviceType_NI9100D-/AA0",
+          "SettingPossible_5",
+          "TimeAutoSync_On",
+          "UpperLamp_On",
+          "TimeSystem_12",
+          "Sound_On",
+          "AdjustingTemp_0",
+          "Sabbath_Off",
+          "EnergySaving_On"
+        ],
+        "x.com.samsung.da.defaultMode": "Bake",
+        "x.com.samsung.da.modeSpec": "[{\"mode\":\"Bake\",\"version\":\"0101\",\"default\":\"Default\",\"control\":\"Start&Setting\",\"cavity\":\"Single\",\"tempMinC\":\"80\",\"tempMaxC\":\"285\",\"tempDefaultC\":\"175\",\"tempListLengthC\":\"0\",\"tempMinF\":\"175\",\"tempMaxF\":\"550\",\"tempDefaultF\":\"350\",\"tempListLengthF\":\"0\",\"timeMin\":\"00:01:00\",\"timeMax\":\"09:59:00\",\"timeDefault\":\"01:00:00\",\"probeMinC\":\"40\",\"probeMaxC\":\"90\",\"probeDefaultC\":\"65\",\"probeMinF\":\"100\",\"probeMaxF\":\"200\",\"probeDefaultF\":\"150\",\"powerDefault\":\"NotSupported\",\"powerListLength\":\"0\",\"tempIntervalC\":\"5\",\"tempIntervalF\":\"5\",\"probeIntervalC\":\"1\",\"probeIntervalF\":\"1\"},{\"mode\":\"Broil\",\"version\":\"0101\",\"default\":\"Normal\",\"control\":\"Setting\",\"cavity\":\"Single\",\"tempMinC\":\"61442\",\"tempMaxC\":\"61441\",\"tempDefaultC\":\"61441\",\"tempListLengthC\":\"2\",\"tempListDataC\":[\"61441\",\"61442\"],\"tempMinF\":\"61442\",\"tempMaxF\":\"61441\",\"tempDefaultF\":\"61441\",\"tempListLengthF\":\"2\",\"tempListDataF\":[\"61441\",\"61442\"],\"timeMin\":\"NotSupported\",\"timeMax\":\"NotSupported\",\"timeDefault\":\"NotSupported\",\"probeMinC\":\"NotSupported\",\"probeMaxC\":\"NotSupported\",\"probeDefaultC\":\"NotSupported\",\"probeMinF\":\"NotSupported\",\"probeMaxF\":\"NotSupported\",\"probeDefaultF\":\"NotSupported\",\"powerDefault\":\"NotSupported\",\"powerListLength\":\"0\",\"tempIntervalC\":\"NotSupported\",\"tempIntervalF\":\"NotSupported\",\"probeIntervalC\":\"NotSupported\",\"probeIntervalF\":\"NotSupported\"},{\"mode\":\"KeepWarm\",\"version\":\"0101\",\"default\":\"Normal\",\"control\":\"Setting\",\"cavity\":\"Single\",\"tempMinC\":\"80\",\"tempMaxC\":\"80\",\"tempDefaultC\":\"80\",\"tempListLengthC\":\"1\",\"tempListDataC\":[\"80\"],\"tempMinF\":\"175\",\"tempMaxF\":\"175\",\"tempDefaultF\":\"175\",\"tempListLengthF\":\"1\",\"tempListDataF\":[\"175\"],\"timeMin\":\"NotSupported\",\"timeMax\":\"NotSupported\",\"timeDefault\":\"NotSupported\",\"probeMinC\":\"NotSupported\",\"probeMaxC\":\"NotSupported\",\"probeDefaultC\":\"NotSupported\",\"probeMinF\":\"NotSupported\",\"probeMaxF\":\"NotSupported\",\"probeDefaultF\":\"NotSupported\",\"powerDefault\":\"NotSupported\",\"powerListLength\":\"0\",\"tempIntervalC\":\"NotSupported\",\"tempIntervalF\":\"NotSupported\",\"probeIntervalC\":\"NotSupported\",\"probeIntervalF\":\"NotSupported\"},{\"mode\":\"BreadProof\",\"version\":\"0101\",\"default\":\"Normal\",\"control\":\"Setting\",\"cavity\":\"Single\",\"tempMinC\":\"35\",\"tempMaxC\":\"35\",\"tempDefaultC\":\"35\",\"tempListLengthC\":\"1\",\"tempListDataC\":[\"35\"],\"tempMinF\":\"95\",\"tempMaxF\":\"95\",\"tempDefaultF\":\"95\",\"tempListLengthF\":\"1\",\"tempListDataF\":[\"95\"],\"timeMin\":\"NotSupported\",\"timeMax\":\"NotSupported\",\"timeDefault\":\"NotSupported\",\"probeMinC\":\"NotSupported\",\"probeMaxC\":\"NotSupported\",\"probeDefaultC\":\"NotSupported\",\"probeMinF\":\"NotSupported\",\"probeMaxF\":\"NotSupported\",\"probeDefaultF\":\"NotSupported\",\"powerDefault\":\"NotSupported\",\"powerListLength\":\"0\",\"tempIntervalC\":\"NotSupported\",\"tempIntervalF\":\"NotSupported\",\"probeIntervalC\":\"NotSupported\",\"probeIntervalF\":\"NotSupported\"},{\"mode\":\"SelfClean\",\"version\":\"0101\",\"default\":\"Normal\",\"control\":\"NotSupported\",\"cavity\":\"Single\",\"tempMinC\":\"NotSupported\",\"tempMaxC\":\"NotSupported\",\"tempDefaultC\":\"NotSupported\",\"tempListLengthC\":\"0\",\"tempMinF\":\"NotSupported\",\"tempMaxF\":\"NotSupported\",\"tempDefaultF\":\"NotSupported\",\"tempListLengthF\":\"0\",\"timeMin\":\"NotSupported\",\"timeMax\":\"NotSupported\",\"timeDefault\":\"NotSupported\",\"probeMinC\":\"NotSupported\",\"probeMaxC\":\"NotSupported\",\"probeDefaultC\":\"NotSupported\",\"probeMinF\":\"NotSupported\",\"probeMaxF\":\"NotSupported\",\"probeDefaultF\":\"NotSupported\",\"powerDefault\":\"NotSupported\",\"powerListLength\":\"0\",\"tempIntervalC\":\"NotSupported\",\"tempIntervalF\":\"NotSupported\",\"probeIntervalC\":\"NotSupported\",\"probeIntervalF\":\"NotSupported\"},{\"mode\":\"SteamClean\",\"version\":\"0101\",\"default\":\"Normal\",\"control\":\"NotSupported\",\"cavity\":\"Single\",\"tempMinC\":\"NotSupported\",\"tempMaxC\":\"NotSupported\",\"tempDefaultC\":\"NotSupported\",\"tempListLengthC\":\"0\",\"tempMinF\":\"NotSupported\",\"tempMaxF\":\"NotSupported\",\"tempDefaultF\":\"NotSupported\",\"tempListLengthF\":\"0\",\"timeMin\":\"NotSupported\",\"timeMax\":\"NotSupported\",\"timeDefault\":\"NotSupported\",\"probeMinC\":\"NotSupported\",\"probeMaxC\":\"NotSupported\",\"probeDefaultC\":\"NotSupported\",\"probeMinF\":\"NotSupported\",\"probeMaxF\":\"NotSupported\",\"probeDefaultF\":\"NotSupported\",\"powerDefault\":\"NotSupported\",\"powerListLength\":\"0\",\"tempIntervalC\":\"NotSupported\",\"tempIntervalF\":\"NotSupported\",\"probeIntervalC\":\"NotSupported\",\"probeIntervalF\":\"NotSupported\"}]"
+      }
+    },
+    {
+      "href": "/operational/state/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.operation"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ],
+        "x.com.samsung.da.state": "Ready",
+        "causeSource.state": "SETB_Ready",
+        "x.com.samsung.da.operationTime": "00:00:00",
+        "x.com.samsung.da.remainingTime": "00:00:00",
+        "x.com.samsung.da.progressPercentage": "1"
+      }
+    },
+    {
+      "href": "/alarms/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.alarms"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.s"
+        ],
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Alarm",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "OV_E_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-22T23:55:41"
+          },
+          {
+            "x.com.samsung.da.id": "1",
+            "x.com.samsung.da.description": "Alarm",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "CT_E_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-22T23:55:41"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/oven/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.oven"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.s"
+        ],
+        "x.com.samsung.da.state": "Ready"
+      }
+    },
+    {
+      "href": "/temperatures/vs/0",
+      "rep": {
+        "rt": [
+          "x.com.samsung.da.temperatures"
+        ],
+        "if": [
+          "oic.if.baseline",
+          "oic.if.a"
+        ],
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Temperature",
+            "x.com.samsung.da.desired": "0",
+            "x.com.samsung.da.current": "175",
+            "x.com.samsung.da.increment": "5",
+            "x.com.samsung.da.unit": "Fahrenheit"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/timezone/vs/0",
+      "rep": {
+        "timezoneid": "America/Chicago",
+        "offset": "-05:00",
+        "DST": "ON"
+      }
+    },
+    {
+      "href": "/oven/spec/vs/0",
+      "rep": {
+        "cavityInfo": {
+          "numberOfCavity": 1,
+          "type": "single",
+          "serviceMainCavity": "single",
+          "cavityList": [
+            {
+              "name": "single",
+              "flexSupport": false,
+              "single": {
+                "resourceId": 0,
+                "supportedFeatureList": [
+                  ""
+                ]
+              }
+            }
+          ]
+        }
+      }
+    },
+    {
+      "href": "/kidslock/vs/0",
+      "rep": {
+        "x.com.samsung.da.kidsLock": "Ready"
+      }
+    },
+    {
+      "href": "/power/vs/0",
+      "rep": {
+        "x.com.samsung.da.power": "On"
+      }
+    },
+    {
+      "href": "/remotectrl/vs/0",
+      "rep": {
+        "x.com.samsung.da.remoteControlEnabled": "false"
+      }
+    },
+    {
+      "href": "/cooktop/settings/status/vs/0",
+      "rep": {
+        "safetyAlert": {
+          "state": "on",
+          "settingTime": 1200
+        }
+      }
+    },
+    {
+      "href": "/cooktop/spec/vs/0",
+      "rep": {
+        "supportedFeatureList": [
+          ""
+        ],
+        "numberOfBurners": 4,
+        "supportedBurnerList": [
+          0,
+          1,
+          2,
+          3
+        ],
+        "supportedPowerLevelList": [
+          "1",
+          "2",
+          "3",
+          "4",
+          "5",
+          "6",
+          "7",
+          "8",
+          "9",
+          "boost",
+          "0",
+          "simmer"
+        ],
+        "supportedRecipeProtocolVersion": 0
+      }
+    },
+    {
+      "href": "/cooktop/status/vs/0",
+      "rep": {
+        "power": "off",
+        "childLock": "off",
+        "operationState": "ready",
+        "additionalStateList": [
+          ""
+        ],
+        "burnerList": [
+          {
+            "burnerNumber": 0,
+            "mode": "normal",
+            "operationState": "ready",
+            "powerLevel": "0",
+            "hotSurfaceState": "normal",
+            "panDetection": true,
+            "timer": {
+              "operationState": "ready",
+              "cookingTime": 0,
+              "remainingTime": 0
+            }
+          },
+          {
+            "burnerNumber": 1,
+            "mode": "normal",
+            "operationState": "ready",
+            "powerLevel": "0",
+            "hotSurfaceState": "normal",
+            "panDetection": true,
+            "timer": {
+              "operationState": "ready",
+              "cookingTime": 0,
+              "remainingTime": 0
+            }
+          },
+          {
+            "burnerNumber": 2,
+            "mode": "normal",
+            "operationState": "ready",
+            "powerLevel": "0",
+            "hotSurfaceState": "normal",
+            "panDetection": true,
+            "timer": {
+              "operationState": "ready",
+              "cookingTime": 0,
+              "remainingTime": 0
+            }
+          },
+          {
+            "burnerNumber": 3,
+            "mode": "normal",
+            "operationState": "ready",
+            "powerLevel": "0",
+            "hotSurfaceState": "normal",
+            "panDetection": true,
+            "timer": {
+              "operationState": "ready",
+              "cookingTime": 0,
+              "remainingTime": 0
+            }
+          }
+        ]
+      }
+    },
+    {
+      "href": "/wirelessinfo/vs/0",
+      "rep": {
+        "macaddressWiFi": "**REDACTED**",
+        "macaddressBLE": "**REDACTED**"
+      }
+    },
+    {
+      "href": "/quickcontrol/info/vs/0",
+      "rep": {
+        "supportedVersion": "1.0"
+      }
+    }
+  ]
+}

tests/fixtures/range_hood_device.json

@@ -0,0 +1,199 @@
+{
+  "device0": [
+    {
+      "rt": ["x.com.samsung.devcol", "oic.wk.col"],
+      "if": ["oic.if.baseline", "oic.if.ll", "oic.if.b"]
+    },
+    {
+      "href": "/personality/presence/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "",
+            "x.com.samsung.da.deviceId": "TEST-DEVICE-ID",
+            "x.com.samsung.da.value": ""
+          }
+        ]
+      }
+    },
+    {
+      "href": "/realtimenotiforclient/vs/0",
+      "rep": {
+        "x.com.samsung.da.timeforshortnoti": "0",
+        "x.com.samsung.da.longnotisubscription": "false",
+        "x.com.samsung.da.periodicnotisubscription": "true"
+      }
+    },
+    {
+      "href": "/airlevelcheck/vs/0",
+      "rep": {
+        "x.com.samsung.da.periodicSensingActivationState": "Off",
+        "x.com.samsung.da.periodicSensingInterval": "3600",
+        "x.com.samsung.da.startSensingOnce": "Off",
+        "x.com.samsung.da.sensingState": "NonProcessing",
+        "x.com.samsung.da.lastSensingTime": "1784651378",
+        "x.com.samsung.da.lastSensingLevel": "Kr2",
+        "x.com.samsung.da.autoExeState": "Sensing",
+        "x.com.samsung.da.supportedAutoExeState": ["Airpurify", "Alarm"],
+        "x.com.samsung.da.periodicSensingSkipStatus": "Off",
+        "x.com.samsung.da.periodicSensingSkipTime": "00000000"
+      }
+    },
+    {
+      "href": "/alarms/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Alarm",
+            "x.com.samsung.da.alarmType": "Device",
+            "x.com.samsung.da.code": "ErrorCode_OFF",
+            "x.com.samsung.da.triggeredTime": "2026-07-21T20:18:51",
+            "x.com.samsung.da.state": "Deleted"
+          }
+        ]
+      }
+    },
+    {
+      "href": "/energy/consumption/vs/0",
+      "rep": {
+        "x.com.samsung.da.cumulativePower": "165620",
+        "x.com.samsung.da.cumulativeSavedPower": "0",
+        "x.com.samsung.da.cumulativeDate": "1784647130",
+        "x.com.samsung.da.cumulativeDateUTC": "1784665130",
+        "x.com.samsung.da.cumulativeUnit": "Wh"
+      }
+    },
+    {"href": "/energy/consumption/0", "rep": {}},
+    {
+      "href": "/mode/vs/0",
+      "rep": {
+        "x.com.samsung.da.options": ["OptionCode_19322", "UpdateAllow_NotAllowed"]
+      }
+    },
+    {
+      "href": "/power/vs/0",
+      "rep": {"x.com.samsung.da.power": "Off"}
+    },
+    {"href": "/power/0", "rep": {"value": false}},
+    {
+      "href": "/sensors/vs/0",
+      "rep": {
+        "x.com.samsung.da.items": [
+          {
+            "x.com.samsung.da.id": "0",
+            "x.com.samsung.da.description": "Sensor for CleanLevel",
+            "x.com.samsung.da.type": "CleanLevel",
+            "x.com.samsung.da.value": ["2"]
+          },
+          {
+            "x.com.samsung.da.id": "2",
+            "x.com.samsung.da.description": "Sensor for Dust",
+            "x.com.samsung.da.type": "Dust",
+            "x.com.samsung.da.value": ["18", "1"]
+          },
+          {
+            "x.com.samsung.da.id": "3",
+            "x.com.samsung.da.description": "Sensor for FineDust",
+            "x.com.samsung.da.type": "FineDust",
+            "x.com.samsung.da.value": ["14", "1"]
+          },
+          {
+            "x.com.samsung.da.id": "4",
+            "x.com.samsung.da.description": "Sensor for SuperFineDust",
+            "x.com.samsung.da.type": "SuperFineDust",
+            "x.com.samsung.da.value": ["9", "1"]
+          }
+        ]
+      }
+    },
+    {
+      "href": "/information/vs/0",
+      "rep": {
+        "x.com.samsung.da.modelNum": "AHD-WW-TP1-22-COMMON|20136141|7800006B001713C44D00090001030000",
+        "x.com.samsung.da.description": "AHD-WW-TP1-22-COMMON",
+        "x.com.samsung.da.serialNum": "TEST-HOOD-SERIAL",
+        "x.com.samsung.da.diagProtocolType": "WIFI_HTTPS",
+        "x.com.samsung.da.diagSetupid": "KH0"
+      }
+    },
+    {
+      "href": "/file/information/vs/0",
+      "rep": {"x.com.samsung.timeoffset": "-05:00"}
+    },
+    {
+      "href": "/configuration/vs/0",
+      "rep": {
+        "x.com.samsung.da.region": "0000000000",
+        "x.com.samsung.da.airconOptionList": ["DR"],
+        "x.com.samsung.da.countryCode": ""
+      }
+    },
+    {
+      "href": "/drlc/0",
+      "rep": {
+        "DRLevel": 0,
+        "start": "1970-01-01T00:00:00Z",
+        "durationminutes": 0,
+        "override": false
+      }
+    },
+    {
+      "href": "/drlc/vs/0",
+      "rep": {
+        "x.com.samsung.da.drlcLevel": "0",
+        "x.com.samsung.da.durationminutes": "0",
+        "x.com.samsung.da.start": "1970-01-01T00:00:00Z",
+        "x.com.samsung.da.override": "Off",
+        "x.com.samsung.da.realSaving": "Off"
+      }
+    },
+    {
+      "href": "/availablecontrolsets/vs/0",
+      "rep": {
+        "x.com.samsung.da.sets": "0000000000012000000000000000",
+        "x.com.samsung.da.id": "HOOD",
+        "x.com.samsung.da.version": "1.0"
+      }
+    },
+    {
+      "href": "/da/softreset/vs/0",
+      "rep": {"x.com.samsung.da.softwarereset": "false"}
+    },
+    {
+      "href": "/filter/hoodfilter/vs/0",
+      "rep": {
+        "x.com.samsung.da.filterUsage": "100",
+        "x.com.samsung.da.filterUsageResolution": "1",
+        "x.com.samsung.da.filterStatus": "wash",
+        "x.com.samsung.da.filterCapacity": "60",
+        "x.com.samsung.da.filterCapacityUnit": "Hour",
+        "x.com.samsung.da.filterResetType": ["replaceable", "washable"]
+      }
+    },
+    {
+      "href": "/hood/fanspeed/vs/0",
+      "rep": {
+        "x.com.samsung.da.hood.autoOperation": "Off",
+        "x.com.samsung.da.hood.fanSpeed": "14",
+        "x.com.samsung.da.hood.supportedFanSpeed": ["14", "15", "16", "17"]
+      }
+    },
+    {
+      "href": "/hood/lamp/vs/0",
+      "rep": {
+        "x.com.samsung.lamp.power": "Off",
+        "x.com.samsung.lamp.current": "2",
+        "x.com.samsung.lamp.range": ["1", "2"]
+      }
+    },
+    {"href": "/autoventilation/vs/0", "rep": {"action": "Start"}},
+    {
+      "href": "/otninformation/vs/0",
+      "rep": {
+        "x.com.samsung.da.target": "",
+        "x.com.samsung.da.newVersionAvailable": "false"
+      }
+    }
+  ]
+}

tests/fixtures/refrigerator_device.json

@@ -279,7 +279,8 @@
       "rep": {
         "aiLevel": "1",
         "supportedAiLevel": [
-          "1"
+          "1",
+          "2"
         ],
         "href": "/energy/ailevel/vs/0"
       }

tests/fixtures/washer_device.json

@@ -44,6 +44,21 @@
       "href": "/energy/consumption/0",
       "rep": {}
     },
+    {
+      "href": "/energy/ailevel/vs/0",
+      "rep": {
+        "aiLevel": "0",
+        "supportedAiLevel": [
+          "1"
+        ],
+        "energySavingInfo": [
+          {
+            "aiLevel": "1",
+            "maxEnergySavingRate": "70"
+          }
+        ]
+      }
+    },
     {
       "href": "/course/vs/0",
       "rep": {

tests/localthings/conftest.py

@@ -3,8 +3,10 @@ from __future__ import annotations
 
 import json
 from pathlib import Path
+from typing import Any
 from unittest.mock import patch
 
+import cbor2
 import pytest
 from pytest_homeassistant_custom_component.common import MockConfigEntry
 
@@ -150,12 +152,26 @@ class FakeObserveSession:
         self.subscribed: list[str] = []
         self.fail_hrefs: set[str] = set()
         self.closed = False
+        # When set to a rep dict, subscribe() immediately delivers that rep
+        # as an OBSERVE notification for the href — what a real device does
+        # when it answers a subscription with the current representation.
+        # `try_enter_observe_mode` clears its notified set before it
+        # subscribes, so this is the only way to deliver a notify that
+        # reliably counts: it lands synchronously via on_notification,
+        # after that clear and before the post-sleep fraction check — a
+        # notify raced in from another thread can be wiped by the clear
+        # (or arrive after the check) depending on scheduling. Set to
+        # None to model a device that answers subscriptions but never
+        # notifies.
+        self.notify_on_subscribe: dict[str, Any] | None = None
 
     def subscribe(self, path_segs):
         href = '/' + '/'.join(path_segs)
         if href in self.fail_hrefs:
             raise ConnectionError("subscribe failed")
         self.subscribed.append(href)
+        if self.notify_on_subscribe is not None and self.on_notification is not None:
+            self.on_notification(href, cbor2.dumps(self.notify_on_subscribe))
         return b'\x01'
 
     def refresh_observes(self, paths):

tests/localthings/test_config_flow.py

@@ -9,7 +9,8 @@ from homeassistant.data_entry_flow import FlowResultType
 from pytest_homeassistant_custom_component.common import MockConfigEntry
 
 from custom_components.localthings.const import (
-    CONF_CA_CERT_PEM, CONF_CA_KEY_PEM, CONF_HOST, CONF_PORT, DOMAIN,
+    CONF_BYPASS_REMOTE_CONTROL, CONF_CA_CERT_PEM, CONF_CA_KEY_PEM,
+    CONF_HOST, CONF_PORT, DOMAIN,
 )
 
 from .conftest import (
@@ -37,6 +38,7 @@ async def test_form_second_device_reuses_creds(hass: HomeAssistant) -> None:
         DOMAIN, context={'source': 'user'}
     )
     assert result['type'] == FlowResultType.FORM
+    assert result['step_id'] == 'user_reuse'
     assert CONF_CA_CERT_PEM not in result['data_schema'].schema
     assert CONF_CA_KEY_PEM not in result['data_schema'].schema
 
@@ -218,6 +220,39 @@ async def test_unknown_type_shows_confirmation_step(
     assert result['data'][CONF_HOST] == MOCK_HOST
 
 
+async def test_unknown_type_without_version_uses_localized_step(
+    hass: HomeAssistant,
+) -> None:
+    """No English placeholder sentinel leaks into a translated description."""
+    probe_result = {
+        'port': MOCK_PORT,
+        'serial': MOCK_SERIAL,
+        'leaf_cert_pem': 'leaf cert',
+        'leaf_key_pem': 'leaf key',
+        'one_ui_version': '',
+        'device_type_recognized': False,
+    }
+    with patch(
+        'custom_components.localthings.config_flow._probe_and_validate',
+        return_value=probe_result,
+    ):
+        result = await hass.config_entries.flow.async_init(
+            DOMAIN, context={'source': 'user'}
+        )
+        result = await hass.config_entries.flow.async_configure(
+            result['flow_id'],
+            {
+                CONF_HOST: MOCK_HOST,
+                CONF_CA_CERT_PEM: MOCK_CA_CERT_PEM,
+                CONF_CA_KEY_PEM: MOCK_CA_KEY_PEM,
+            },
+        )
+
+    assert result['type'] == FlowResultType.FORM
+    assert result['step_id'] == 'confirm_unknown_type_no_version'
+    assert not result.get('description_placeholders')
+
+
 async def test_duplicate_device_aborted(hass: HomeAssistant, mock_probe) -> None:
     """Second add of same serial: flow aborts.
 
@@ -276,3 +311,200 @@ def test_probe_marks_washer_as_recognized(monkeypatch):
         ) is not None
     )
     assert recognized is True
+
+
+async def test_options_flow_init_shows_menu(hass: HomeAssistant) -> None:
+    """The options flow's entry point is now a menu (issue #54's debug
+    panel lives alongside the remote-control settings), not the settings
+    form directly."""
+    entry = MockConfigEntry(domain=DOMAIN, data=ENTRY_DATA, unique_id=f'localthings_{MOCK_SERIAL}')
+    entry.add_to_hass(hass)
+
+    result = await hass.config_entries.options.async_init(entry.entry_id)
+
+    assert result['type'] == FlowResultType.MENU
+    assert result['step_id'] == 'init'
+    assert set(result['menu_options']) == {'settings', 'debug_write'}
+
+
+async def test_options_flow_default_is_off(hass: HomeAssistant) -> None:
+    """The bypass defaults to False, so devices that never touch this
+    option see no change in the remote-control write block."""
+    entry = MockConfigEntry(domain=DOMAIN, data=ENTRY_DATA, unique_id=f'localthings_{MOCK_SERIAL}')
+    entry.add_to_hass(hass)
+
+    result = await hass.config_entries.options.async_init(entry.entry_id)
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'next_step_id': 'settings'}
+    )
+
+    assert result['type'] == FlowResultType.FORM
+    assert result['step_id'] == 'settings'
+    assert result['data_schema']({})[CONF_BYPASS_REMOTE_CONTROL] is False
+
+
+async def test_options_flow_can_enable_bypass(hass: HomeAssistant) -> None:
+    """Submitting the form with the toggle on stores it in entry.options,
+    where coordinator.async_send_command reads it (issue #54)."""
+    entry = MockConfigEntry(domain=DOMAIN, data=ENTRY_DATA, unique_id=f'localthings_{MOCK_SERIAL}')
+    entry.add_to_hass(hass)
+
+    result = await hass.config_entries.options.async_init(entry.entry_id)
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'next_step_id': 'settings'}
+    )
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={CONF_BYPASS_REMOTE_CONTROL: True}
+    )
+
+    assert result['type'] == FlowResultType.CREATE_ENTRY
+    assert entry.options[CONF_BYPASS_REMOTE_CONTROL] is True
+
+
+async def test_options_flow_reflects_previously_saved_value(hass: HomeAssistant) -> None:
+    """Reopening the form shows the currently-saved choice as the default,
+    not always False."""
+    entry = MockConfigEntry(
+        domain=DOMAIN, data=ENTRY_DATA, unique_id=f'localthings_{MOCK_SERIAL}',
+        options={CONF_BYPASS_REMOTE_CONTROL: True},
+    )
+    entry.add_to_hass(hass)
+
+    result = await hass.config_entries.options.async_init(entry.entry_id)
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'next_step_id': 'settings'}
+    )
+
+    assert result['data_schema']({})[CONF_BYPASS_REMOTE_CONTROL] is True
+
+
+async def test_options_flow_debug_write_shows_hrefs_from_coordinator(
+    hass: HomeAssistant, mock_coordinator_session,
+) -> None:
+    """The debug panel's href dropdown is populated from the live
+    coordinator's cached resources, not a static list."""
+    entry = MockConfigEntry(domain=DOMAIN, data=ENTRY_DATA, unique_id=f'localthings_{MOCK_SERIAL}')
+    entry.add_to_hass(hass)
+    await hass.config_entries.async_setup(entry.entry_id)
+    await hass.async_block_till_done()
+
+    result = await hass.config_entries.options.async_init(entry.entry_id)
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'next_step_id': 'debug_write'}
+    )
+
+    assert result['type'] == FlowResultType.FORM
+    assert result['step_id'] == 'debug_write'
+
+
+async def test_options_flow_debug_write_aborts_when_device_not_loaded(
+    hass: HomeAssistant,
+) -> None:
+    """No coordinator in hass.data (device never finished loading) means
+    the debug panel has nothing to write to or read from."""
+    entry = MockConfigEntry(domain=DOMAIN, data=ENTRY_DATA, unique_id=f'localthings_{MOCK_SERIAL}')
+    entry.add_to_hass(hass)
+
+    result = await hass.config_entries.options.async_init(entry.entry_id)
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'next_step_id': 'debug_write'}
+    )
+
+    assert result['type'] == FlowResultType.ABORT
+    assert result['reason'] == 'not_loaded'
+
+
+async def test_options_flow_debug_edit_writes_and_shows_result(
+    hass: HomeAssistant, mock_coordinator_session,
+) -> None:
+    """Picking an href, then submitting a payload, drives
+    coordinator.async_raw_write and lands on the result menu with the
+    device's response."""
+    entry = MockConfigEntry(domain=DOMAIN, data=ENTRY_DATA, unique_id=f'localthings_{MOCK_SERIAL}')
+    entry.add_to_hass(hass)
+    await hass.config_entries.async_setup(entry.entry_id)
+    await hass.async_block_till_done()
+
+    result = await hass.config_entries.options.async_init(entry.entry_id)
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'next_step_id': 'debug_write'}
+    )
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'href': '/washer/vs/0'},
+    )
+    assert result['type'] == FlowResultType.FORM
+    assert result['step_id'] == 'debug_edit'
+
+    with patch(
+        'custom_components.localthings.coordinator.LocalThingsCoordinator.async_raw_write',
+        return_value=(0x44, {'a': 1}),
+    ):
+        result = await hass.config_entries.options.async_configure(
+            result['flow_id'], user_input={'payload': {'a': 1}},
+        )
+
+    assert result['type'] == FlowResultType.MENU
+    assert result['step_id'] == 'debug_result'
+    assert result['description_placeholders']['code'] == '2.04 (0x44)'
+
+
+async def test_options_flow_debug_edit_rejects_empty_payload(
+    hass: HomeAssistant, mock_coordinator_session,
+) -> None:
+    entry = MockConfigEntry(domain=DOMAIN, data=ENTRY_DATA, unique_id=f'localthings_{MOCK_SERIAL}')
+    entry.add_to_hass(hass)
+    await hass.config_entries.async_setup(entry.entry_id)
+    await hass.async_block_till_done()
+
+    result = await hass.config_entries.options.async_init(entry.entry_id)
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'next_step_id': 'debug_write'}
+    )
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'href': '/washer/vs/0'},
+    )
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'payload': {}},
+    )
+
+    assert result['type'] == FlowResultType.FORM
+    assert result['step_id'] == 'debug_edit'
+    assert result['errors'] == {'payload': 'empty_payload'}
+
+
+async def test_options_flow_finish_preserves_existing_options(
+    hass: HomeAssistant, mock_coordinator_session,
+) -> None:
+    """Finishing from the debug-result menu must not clobber a previously
+    saved remote-control bypass setting."""
+    entry = MockConfigEntry(
+        domain=DOMAIN, data=ENTRY_DATA, unique_id=f'localthings_{MOCK_SERIAL}',
+        options={CONF_BYPASS_REMOTE_CONTROL: True},
+    )
+    entry.add_to_hass(hass)
+    await hass.config_entries.async_setup(entry.entry_id)
+    await hass.async_block_till_done()
+
+    result = await hass.config_entries.options.async_init(entry.entry_id)
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'next_step_id': 'debug_write'}
+    )
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'href': '/washer/vs/0'},
+    )
+    with patch(
+        'custom_components.localthings.coordinator.LocalThingsCoordinator.async_raw_write',
+        return_value=(0x44, {'a': 1}),
+    ):
+        result = await hass.config_entries.options.async_configure(
+            result['flow_id'], user_input={'payload': {'a': 1}},
+        )
+    assert result['type'] == FlowResultType.MENU
+    assert result['step_id'] == 'debug_result'
+
+    result = await hass.config_entries.options.async_configure(
+        result['flow_id'], user_input={'next_step_id': 'finish'}
+    )
+
+    assert result['type'] == FlowResultType.CREATE_ENTRY
+    assert entry.options[CONF_BYPASS_REMOTE_CONTROL] is True

tests/localthings/test_coordinator.py

@@ -1,20 +1,22 @@
 """Tests for the LocalThingsCoordinator."""
 from __future__ import annotations
 
-import threading
-import time
 from datetime import timedelta
 from unittest.mock import AsyncMock, patch
 
 import cbor2
 import pytest
 from homeassistant.core import HomeAssistant
+from homeassistant.exceptions import ServiceValidationError
 from homeassistant.helpers import issue_registry as ir
 
 from custom_components.localthings.const import (
-    CONF_HOST, DOMAIN, SUMMARY_INTERVAL_S,
+    CONF_BYPASS_REMOTE_CONTROL, CONF_HOST, DOMAIN, SUMMARY_INTERVAL_S,
 )
 from custom_components.localthings.coordinator import LocalThingsCoordinator
+from custom_components.localthings.registry.capabilities.common import (
+    remote_control_enabled,
+)
 from custom_components.localthings.observe import MODE_OBSERVE, MODE_POLL, PUSH_HEALTH_WINDOW_S
 
 from .conftest import ENTRY_DATA, MOCK_SERIAL
@@ -134,6 +136,31 @@ def test_run_discovery_detects_washer_via_model_fallback(
     assert coordinator.device_type_name == 'washer'
 
 
+def test_run_discovery_detects_cooktop_via_resource_signature(
+    hass: HomeAssistant, mock_entry
+) -> None:
+    """NA9300K omits oneUiVersion and information but has burner options."""
+    from tests.conftest import _load_device
+
+    coordinator = LocalThingsCoordinator(hass, mock_entry)
+    coordinator._run_discovery(_load_device('cooktop'))
+
+    assert coordinator.device_type_name == 'cooktop'
+    assert coordinator._unbound_hrefs == []
+
+
+def test_run_discovery_detects_range_hood_via_model(
+    hass: HomeAssistant, mock_entry
+) -> None:
+    from tests.conftest import _load_device
+
+    coordinator = LocalThingsCoordinator(hass, mock_entry)
+    coordinator._run_discovery(_load_device('range_hood'))
+
+    assert coordinator.device_type_name == 'range_hood'
+    assert coordinator._unbound_hrefs == []
+
+
 def test_update_coverage_gap_issue_creates_issue_for_unknown_type(
     hass: HomeAssistant, mock_entry
 ) -> None:
@@ -260,21 +287,18 @@ async def test_enters_observe_mode_when_hot_warm_hrefs_notify(
     coordinator: LocalThingsCoordinator = hass.data[DOMAIN][mock_entry.entry_id]
     hrefs = coordinator._hot_hrefs + coordinator._warm_hrefs
 
-    # try_enter_observe_mode clears prior notifications as soon as it
-    # starts, so notifies must land *during* its grace-period sleep (same
-    # pattern test_observe.py uses), not before the call.
-    def _notify_during_grace_period():
-        time.sleep(0.005)
-        for href in hrefs:
-            fake.on_notification(href, cbor2.dumps({'notified': True}))
-
-    notifier = threading.Thread(target=_notify_during_grace_period, daemon=True)
-    notifier.start()
+    # try_enter_observe_mode clears prior notifications before it
+    # subscribes, then checks the notified fraction after the grace-period
+    # sleep — a notify counts as long as it arrives in that window, not
+    # specifically during the sleep itself. The fake session delivers one
+    # synchronously from subscribe() for every href it subscribes to (see
+    # FakeObserveSession.notify_on_subscribe in conftest.py), which lands
+    # it in that window by construction rather than by timing.
+    fake.notify_on_subscribe = {'notified': True}
     entered = await hass.async_add_executor_job(
         coordinator._observe.try_enter_observe_mode,
         fake, hrefs, 0.02, 0.8,
     )
-    notifier.join()
 
     assert entered is True
     assert coordinator._observe.mode == MODE_OBSERVE
@@ -300,18 +324,11 @@ async def test_reconnect_while_observe_mode_downgrades_to_poll(
 
     # Get the coordinator into observe mode the same way
     # test_enters_observe_mode_when_hot_warm_hrefs_notify does.
-    def _notify_during_grace_period():
-        time.sleep(0.005)
-        for href in hrefs:
-            fake.on_notification(href, cbor2.dumps({'notified': True}))
-
-    notifier = threading.Thread(target=_notify_during_grace_period, daemon=True)
-    notifier.start()
+    fake.notify_on_subscribe = {'notified': True}
     entered = await hass.async_add_executor_job(
         coordinator._observe.try_enter_observe_mode,
         fake, hrefs, 0.02, 0.8,
     )
-    notifier.join()
     assert entered is True
     assert coordinator.observe_mode == MODE_OBSERVE
 
@@ -324,12 +341,12 @@ async def test_reconnect_while_observe_mode_downgrades_to_poll(
 
     # Simulate the existing "poll failed, reconnecting" branch: _poll_once
     # fails once (triggering the reconnect/backoff path), then succeeds.
-    # No fresh notifies are supplied for the immediate resubscribe attempt
-    # this now triggers, so its grace period (shortened for tests by the
-    # `_fast_coordinator_timers` autouse fixture — see conftest.py) times
-    # out and mode stays 'poll' — this test only asserts the tear-down half of
-    # the fix; test_reconnect_from_observe_mode_resubscribes_immediately
-    # covers the successful-immediate-resubscribe half.
+    # The device stops notifying on subscribe, so the immediate resubscribe
+    # attempt this now triggers gets nothing back and mode stays 'poll' —
+    # this test only asserts the tear-down half of the fix;
+    # test_reconnect_from_observe_mode_resubscribes_immediately covers the
+    # successful-immediate-resubscribe half.
+    fake.notify_on_subscribe = None
     with (
         patch(
             'custom_components.localthings.coordinator.LocalThingsCoordinator._poll_once',
@@ -362,18 +379,11 @@ async def test_poll_timeout_skips_reconnect_when_push_is_healthy(
     coordinator: LocalThingsCoordinator = hass.data[DOMAIN][mock_entry.entry_id]
     hrefs = coordinator._hot_hrefs + coordinator._warm_hrefs
 
-    def _notify_during_grace_period():
-        time.sleep(0.005)
-        for href in hrefs:
-            fake.on_notification(href, cbor2.dumps({'notified': True}))
-
-    notifier = threading.Thread(target=_notify_during_grace_period, daemon=True)
-    notifier.start()
+    fake.notify_on_subscribe = {'notified': True}
     entered = await hass.async_add_executor_job(
         coordinator._observe.try_enter_observe_mode,
         fake, hrefs, 0.02, 0.8,
     )
-    notifier.join()
     assert entered is True
     assert coordinator.observe_mode == MODE_OBSERVE
 
@@ -408,18 +418,11 @@ async def test_poll_timeout_reconnects_after_consecutive_limit_even_with_push(
     coordinator: LocalThingsCoordinator = hass.data[DOMAIN][mock_entry.entry_id]
     hrefs = coordinator._hot_hrefs + coordinator._warm_hrefs
 
-    def _notify_during_grace_period():
-        time.sleep(0.005)
-        for href in hrefs:
-            fake.on_notification(href, cbor2.dumps({'notified': True}))
-
-    notifier = threading.Thread(target=_notify_during_grace_period, daemon=True)
-    notifier.start()
+    fake.notify_on_subscribe = {'notified': True}
     entered = await hass.async_add_executor_job(
         coordinator._observe.try_enter_observe_mode,
         fake, hrefs, 0.02, 0.8,
     )
-    notifier.join()
     assert entered is True
     assert coordinator.observe_mode == MODE_OBSERVE
 
@@ -441,7 +444,10 @@ async def test_poll_timeout_reconnects_after_consecutive_limit_even_with_push(
             assert coordinator.observe_mode == MODE_OBSERVE
 
     # The final consecutive timeout crosses the limit and triggers the
-    # existing reconnect path, which then succeeds and downgrades.
+    # existing reconnect path, which then succeeds and downgrades. The
+    # device stops notifying on subscribe, so the resubscribe attempt that
+    # follows the reconnect finds nothing and mode stays 'poll'.
+    fake.notify_on_subscribe = None
     with (
         patch(
             'custom_components.localthings.coordinator.LocalThingsCoordinator._poll_once',
@@ -473,18 +479,11 @@ async def test_poll_timeout_counter_resets_when_push_is_healthy_again(
     coordinator: LocalThingsCoordinator = hass.data[DOMAIN][mock_entry.entry_id]
     hrefs = coordinator._hot_hrefs + coordinator._warm_hrefs
 
-    def _notify_during_grace_period():
-        time.sleep(0.005)
-        for href in hrefs:
-            fake.on_notification(href, cbor2.dumps({'notified': True}))
-
-    notifier = threading.Thread(target=_notify_during_grace_period, daemon=True)
-    notifier.start()
+    fake.notify_on_subscribe = {'notified': True}
     entered = await hass.async_add_executor_job(
         coordinator._observe.try_enter_observe_mode,
         fake, hrefs, 0.02, 0.8,
     )
-    notifier.join()
     assert entered is True
     assert coordinator.observe_mode == MODE_OBSERVE
 
@@ -526,21 +525,11 @@ async def test_reconnect_from_observe_mode_resubscribes_immediately(
     coordinator: LocalThingsCoordinator = hass.data[DOMAIN][mock_entry.entry_id]
     hrefs = coordinator._hot_hrefs + coordinator._warm_hrefs
 
-    def _notify(delay: float = 0.005) -> threading.Thread:
-        def _run():
-            time.sleep(delay)
-            for href in hrefs:
-                fake.on_notification(href, cbor2.dumps({'notified': True}))
-        t = threading.Thread(target=_run, daemon=True)
-        t.start()
-        return t
-
-    notifier = _notify()
+    fake.notify_on_subscribe = {'notified': True}
     entered = await hass.async_add_executor_job(
         coordinator._observe.try_enter_observe_mode,
         fake, hrefs, 0.02, 0.8,
     )
-    notifier.join()
     assert entered is True
     assert coordinator.observe_mode == MODE_OBSERVE
 
@@ -563,10 +552,8 @@ async def test_reconnect_from_observe_mode_resubscribes_immediately(
             new=AsyncMock(),
         ),
     ):
-        notifier = _notify()
         await coordinator.async_request_refresh()
         await hass.async_block_till_done()
-        notifier.join()
 
     assert coordinator.observe_mode == MODE_OBSERVE
 
@@ -587,21 +574,11 @@ async def test_sweep_mismatch_never_downgrades_a_live_observe_session(
     hrefs = coordinator._hot_hrefs + coordinator._warm_hrefs
     assert len(hrefs) >= 2
 
-    def _notify(delay: float = 0.005) -> threading.Thread:
-        def _run():
-            time.sleep(delay)
-            for href in hrefs:
-                fake.on_notification(href, cbor2.dumps({'notified': True}))
-        t = threading.Thread(target=_run, daemon=True)
-        t.start()
-        return t
-
-    notifier = _notify()
+    fake.notify_on_subscribe = {'notified': True}
     entered = await hass.async_add_executor_job(
         coordinator._observe.try_enter_observe_mode,
         fake, hrefs, 0.02, 0.8,
     )
-    notifier.join()
     assert entered is True
     assert coordinator.observe_mode == MODE_OBSERVE
 
@@ -637,21 +614,11 @@ async def test_sweep_mismatch_forces_subpolls_on_a_live_observe_session(
     hrefs = coordinator._hot_hrefs + coordinator._warm_hrefs
     assert len(hrefs) >= 2
 
-    def _notify(delay: float = 0.005) -> threading.Thread:
-        def _run():
-            time.sleep(delay)
-            for href in hrefs:
-                fake.on_notification(href, cbor2.dumps({'notified': True}))
-        t = threading.Thread(target=_run, daemon=True)
-        t.start()
-        return t
-
-    notifier = _notify()
+    fake.notify_on_subscribe = {'notified': True}
     entered = await hass.async_add_executor_job(
         coordinator._observe.try_enter_observe_mode,
         fake, hrefs, 0.02, 0.8,
     )
-    notifier.join()
     assert entered is True
     assert coordinator.observe_mode == MODE_OBSERVE
 
@@ -676,7 +643,13 @@ async def test_write_marks_href_pending_before_post(
     hass: HomeAssistant, mock_entry, mock_coordinator_observe_session
 ) -> None:
     """async_send_command must call mark_write_pending before POSTing so a
-    slow-to-settle device can't immediately revert the optimistic write."""
+    slow-to-settle device can't immediately revert the optimistic write --
+    and it must guard the write's actual target href (write_fn's own
+    path_segs), not bound_entity.href. Those differ for a composite entity
+    like the AC's ClimateDesc (bound to /mode/vs/0, but writing power/temp/
+    fan/swing/preset to their own sibling hrefs) -- guarding the bound href
+    protected the wrong resource and left the one the entity actually
+    displays from unprotected (issues #17/#53)."""
     from custom_components.localthings.registry.discovery import BoundEntity
     from custom_components.localthings.registry.entities import NumberDesc
 
@@ -695,4 +668,359 @@ async def test_write_marks_href_pending_before_post(
         fake.post = lambda *a, **k: (0x44, b'')
         await coordinator.async_send_command(bound, 5)
 
-    assert coordinator._observe._settle_until.get('/test/vs/0') is not None
+    assert coordinator._observe._settle_until.get('/some/path') is not None
+    assert coordinator._observe._settle_until.get('/test/vs/0') is None
+
+
+async def test_send_command_applies_write_optimistically_before_settling(
+    hass: HomeAssistant, mock_entry, mock_coordinator_observe_session,
+) -> None:
+    """The cache must reflect a write immediately at the write's actual
+    target href (write_fn's path_segs) -- not bound_entity.href, which
+    differs for a composite entity like the AC's ClimateDesc -- and stay put
+    against a stale echo for the rest of the settle window there.
+
+    Applying the optimistic value to bound_entity.href instead is exactly
+    how issues #17/#53 survived the original optimistic-apply fix (issue
+    #27): the bound href got a harmless (if nonsensical) optimistic merge,
+    while the resource the entity actually reads from for its displayed
+    state never got one and stayed stale until the next real read of it."""
+    from custom_components.localthings.registry.discovery import BoundEntity
+    from custom_components.localthings.registry.entities import NumberDesc
+
+    fake = mock_coordinator_observe_session
+    await hass.config_entries.async_setup(mock_entry.entry_id)
+    await hass.async_block_till_done()
+    coordinator: LocalThingsCoordinator = hass.data[DOMAIN][mock_entry.entry_id]
+
+    def _write_fn(payload, rep, href):
+        return (['some', 'path'], {'value': payload})
+
+    desc = NumberDesc(key='test', field='value', write_fn=_write_fn)
+    bound = BoundEntity(href='/test/vs/0', capability=coordinator.bound[0].capability, desc=desc)
+
+    with patch.object(fake, 'subscribe'):
+        fake.post = lambda *a, **k: (0x44, b'')
+        await coordinator.async_send_command(bound, 5)
+
+    # The optimistic value is visible right away at the write's real
+    # target, not the bound href.
+    assert coordinator._cache.get('/some/path') == {'value': 5}
+    assert coordinator._cache.get('/test/vs/0') != {'value': 5}
+
+    # A stale update racing in behind the write (e.g. a poll/notify that
+    # was already in flight before the PUT) must not clobber it while the
+    # settle window is open.
+    applied = coordinator._observe.apply('/some/path', {'value': 0}, source='observe')
+    assert applied is False
+    assert coordinator._cache.get('/some/path') == {'value': 5}
+
+
+async def test_climate_power_write_applies_to_its_own_href_not_bound_href(
+    hass: HomeAssistant, mock_entry, mock_coordinator_observe_session
+) -> None:
+    """Regression for issues #17/#53, using the real AC capability. The
+    composite climate entity binds /mode/vs/0 (airconditioner.CLIMATE.href),
+    but a power command's write_fn (airconditioner._climate_write) targets
+    the sibling /power/0 -- the href climate.py's `_is_on()` actually reads.
+    The optimistic value and settle guard must land there, not on the bound
+    /mode/vs/0, or the entity never sees the write and shows stale state
+    until the next unrelated read of /power/0."""
+    from custom_components.localthings.registry.capabilities import airconditioner
+    from custom_components.localthings.registry.discovery import BoundEntity
+
+    fake = mock_coordinator_observe_session
+    await hass.config_entries.async_setup(mock_entry.entry_id)
+    await hass.async_block_till_done()
+    coordinator: LocalThingsCoordinator = hass.data[DOMAIN][mock_entry.entry_id]
+
+    bound = BoundEntity(
+        href=airconditioner.CLIMATE.href,
+        capability=coordinator.bound[0].capability,
+        desc=airconditioner.CLIMATE.entities[0],
+    )
+
+    with patch.object(fake, 'subscribe'):
+        fake.post = lambda *a, **k: (0x44, b'')
+        await coordinator.async_send_command(bound, ('power', True))
+
+    assert coordinator._cache.get('/power/0') == {'value': True}
+    assert coordinator._cache.get(airconditioner.CLIMATE.href) != {'value': True}
+    assert coordinator._observe._settle_until.get('/power/0') is not None
+
+
+async def test_send_command_survives_stale_confirm_poll(
+    hass: HomeAssistant, mock_entry, mock_coordinator_observe_session, fridge_resources,
+) -> None:
+    """The settle window must outlast the confirm poll async_send_command
+    triggers via async_request_refresh(), not just DEFAULT_SETTLE_S's fixed
+    few seconds (issue #9). Some devices settle a write internally slower
+    than that refresh's own round trip -- issue #9's washer packs cycle/
+    detergent/softener selection into /course/vs/0's shared options[]
+    array, which visibly takes a few seconds of validation/dispenser
+    movement to catch up, unlike /washer/vs/0's plain temperature/spin
+    fields on the same device, which confirm instantly. A confirm poll that
+    lands before the device has caught up is stale, and a settle window
+    sized only to the fixed default (rather than the PUT+poll round trip)
+    expires before that poll even returns, so the stale read lands
+    unprotected and reverts the optimistic value -- self-correcting again
+    only once a later poll finally sees the real change. That reads to a
+    user as the write reverting, then reapplying itself, a few seconds
+    later."""
+    from custom_components.localthings.registry.discovery import BoundEntity
+    from custom_components.localthings.registry.entities import NumberDesc
+
+    fake = mock_coordinator_observe_session
+    await hass.config_entries.async_setup(mock_entry.entry_id)
+    await hass.async_block_till_done()
+    coordinator: LocalThingsCoordinator = hass.data[DOMAIN][mock_entry.entry_id]
+
+    def _write_fn(payload, rep, href):
+        return (['test', 'vs', '0'], {'value': payload})
+
+    desc = NumberDesc(key='test', field='value', write_fn=_write_fn)
+    bound = BoundEntity(href='/test/vs/0', capability=coordinator.bound[0].capability, desc=desc)
+
+    def _stale_confirm_poll():
+        # Stand-in for the write's own confirming /device/0 poll racing
+        # against a stale read for the same href -- the device's internal
+        # state hasn't caught up to the write yet, even though it will a
+        # little later.
+        coordinator._observe.apply('/test/vs/0', {'value': 0}, source='poll')
+        return fridge_resources
+
+    with (
+        patch.object(fake, 'subscribe'),
+        patch.object(LocalThingsCoordinator, '_poll_once', side_effect=_stale_confirm_poll),
+    ):
+        fake.post = lambda *a, **k: (0x44, b'')
+        await coordinator.async_send_command(bound, 5)
+
+    # The optimistic value is visible right away and survived the stale
+    # confirm-poll race triggered by the refresh above.
+    assert coordinator._cache.get('/test/vs/0') == {'value': 5}
+
+    # The settle window is still open afterward -- sized to outlast the
+    # whole PUT + confirm-poll round trip, not released the moment that
+    # round trip happens to finish.
+    applied = coordinator._observe.apply('/test/vs/0', {'value': 0}, source='observe')
+    assert applied is False
+    assert coordinator._cache.get('/test/vs/0') == {'value': 5}
+
+
+async def test_second_write_to_same_href_lands_during_first_writes_settle_window(
+    hass: HomeAssistant, mock_entry, mock_coordinator_observe_session,
+) -> None:
+    """Regression for issue #9: /course/vs/0 backs several independent
+    washer selects (cycle, detergent quantity, softener quantity, ...)
+    sharing one href. The settle window is now sized to tens of seconds
+    (see test_send_command_survives_stale_confirm_poll), which makes a
+    second, different write to that href landing while the first write's
+    window is still open a routine occurrence -- e.g. a user picking a
+    cycle and then adjusting detergent quantity within the same minute --
+    not a rare edge case. The second write's own optimistic value must
+    still show up immediately; a guard meant to protect optimistic writes
+    from stale device echoes must not itself suppress a later one."""
+    from custom_components.localthings.registry.discovery import BoundEntity
+    from custom_components.localthings.registry.entities import NumberDesc
+
+    fake = mock_coordinator_observe_session
+    await hass.config_entries.async_setup(mock_entry.entry_id)
+    await hass.async_block_till_done()
+    coordinator: LocalThingsCoordinator = hass.data[DOMAIN][mock_entry.entry_id]
+
+    desc_a = NumberDesc(key='cycle', field='cycle',
+                        write_fn=lambda p, rep, href: (['test', 'vs', '0'], {'cycle': p}))
+    desc_b = NumberDesc(key='detergent', field='detergent',
+                        write_fn=lambda p, rep, href: (['test', 'vs', '0'], {'detergent': p}))
+    bound_a = BoundEntity(href='/test/vs/0', capability=coordinator.bound[0].capability, desc=desc_a)
+    bound_b = BoundEntity(href='/test/vs/0', capability=coordinator.bound[0].capability, desc=desc_b)
+
+    with patch.object(fake, 'subscribe'):
+        fake.post = lambda *a, **k: (0x44, b'')
+        await coordinator.async_send_command(bound_a, 'Eco')
+        assert coordinator._cache.get('/test/vs/0') == {'cycle': 'Eco'}
+
+        # Still well within the first write's settle window.
+        await coordinator.async_send_command(bound_b, 'High')
+
+    assert coordinator._cache.get('/test/vs/0') == {'cycle': 'Eco', 'detergent': 'High'}
+
+
+class TestRemoteControlEnabled:
+    """remote_control_enabled (registry/capabilities/common.py) is the
+    single source of truth for the /remotectrl on/off signal, shared by
+    the Smart Control binary_sensor descriptors and the coordinator's
+    write guard alike."""
+
+    def test_vs_fallback_href_true_is_enabled(self):
+        resources = {'/remotectrl/vs/0': {'x.com.samsung.da.remoteControlEnabled': 'true'}}
+        assert remote_control_enabled(resources) is True
+
+    def test_vs_fallback_href_false_is_disabled(self):
+        resources = {'/remotectrl/vs/0': {'x.com.samsung.da.remoteControlEnabled': 'false'}}
+        assert remote_control_enabled(resources) is False
+
+    def test_generic_href_true_is_enabled(self):
+        resources = {'/remotectrl/0': {'value': True}}
+        assert remote_control_enabled(resources) is True
+
+    def test_generic_href_false_is_disabled(self):
+        resources = {'/remotectrl/0': {'value': False}}
+        assert remote_control_enabled(resources) is False
+
+    def test_generic_href_wins_when_both_present(self):
+        resources = {
+            '/remotectrl/0': {'value': True},
+            '/remotectrl/vs/0': {'x.com.samsung.da.remoteControlEnabled': 'false'},
+        }
+        assert remote_control_enabled(resources) is True
+
+    def test_assumes_enabled_when_capability_absent(self):
+        assert remote_control_enabled({}) is True
+
+
+async def test_send_command_blocked_when_remote_control_disabled(
+    hass: HomeAssistant, mock_entry, mock_coordinator_observe_session
+) -> None:
+    """A device reporting remote control off must reject every write with
+    a user-facing message, ahead of write_fn's silent-no-op path and any
+    description-level validate_fn."""
+    from custom_components.localthings.registry.discovery import BoundEntity
+    from custom_components.localthings.registry.entities import NumberDesc
+
+    fake = mock_coordinator_observe_session
+    await hass.config_entries.async_setup(mock_entry.entry_id)
+    await hass.async_block_till_done()
+    coordinator: LocalThingsCoordinator = hass.data[DOMAIN][mock_entry.entry_id]
+    coordinator._cache.apply_rep(
+        '/remotectrl/vs/0',
+        {'x.com.samsung.da.remoteControlEnabled': 'false'},
+        source='test',
+    )
+
+    def _write_fn(payload, rep, href):
+        return (['some', 'path'], {'value': payload})
+
+    desc = NumberDesc(key='test', field='value', write_fn=_write_fn)
+    bound = BoundEntity(href='/test/vs/0', capability=coordinator.bound[0].capability, desc=desc)
+
+    posted = False
+
+    def _post(*a, **k):
+        nonlocal posted
+        posted = True
+        return (0x44, b'')
+
+    with patch.object(fake, 'subscribe'):
+        fake.post = _post
+        with pytest.raises(ServiceValidationError) as exc_info:
+            await coordinator.async_send_command(bound, 5)
+
+    assert exc_info.value.translation_domain == DOMAIN
+    assert exc_info.value.translation_key == 'remote_control_disabled'
+
+    assert posted is False
+
+
+async def test_send_command_allowed_when_remote_control_enabled(
+    hass: HomeAssistant, mock_entry, mock_coordinator_observe_session
+) -> None:
+    """The same write goes through once remote control reports enabled."""
+    from custom_components.localthings.registry.discovery import BoundEntity
+    from custom_components.localthings.registry.entities import NumberDesc
+
+    fake = mock_coordinator_observe_session
+    await hass.config_entries.async_setup(mock_entry.entry_id)
+    await hass.async_block_till_done()
+    coordinator: LocalThingsCoordinator = hass.data[DOMAIN][mock_entry.entry_id]
+    coordinator._cache.apply_rep(
+        '/remotectrl/vs/0',
+        {'x.com.samsung.da.remoteControlEnabled': 'true'},
+        source='test',
+    )
+
+    def _write_fn(payload, rep, href):
+        return (['some', 'path'], {'value': payload})
+
+    desc = NumberDesc(key='test', field='value', write_fn=_write_fn)
+    bound = BoundEntity(href='/test/vs/0', capability=coordinator.bound[0].capability, desc=desc)
+
+    with patch.object(fake, 'subscribe'):
+        fake.post = lambda *a, **k: (0x44, b'')
+        await coordinator.async_send_command(bound, 5)
+
+    assert coordinator._cache.get('/some/path') == {'value': 5}
+
+
+async def test_send_command_remote_control_check_precedes_validate_fn(
+    hass: HomeAssistant, mock_entry, mock_coordinator_observe_session
+) -> None:
+    """When both a disabled remote-control state and a failing validate_fn
+    apply to the same write, the remote-control message wins -- it's the
+    more actionable of the two and is checked first."""
+    from custom_components.localthings.registry.discovery import BoundEntity
+    from custom_components.localthings.registry.entities import SwitchDesc
+
+    await hass.config_entries.async_setup(mock_entry.entry_id)
+    await hass.async_block_till_done()
+    coordinator: LocalThingsCoordinator = hass.data[DOMAIN][mock_entry.entry_id]
+    coordinator._cache.apply_rep(
+        '/remotectrl/vs/0',
+        {'x.com.samsung.da.remoteControlEnabled': 'false'},
+        source='test',
+    )
+
+    def _write_fn(payload, rep, href=None):
+        return (['some', 'path'], {'value': payload})
+
+    def _validate_fn(payload, rep, resources):
+        return "always rejected"
+
+    desc = SwitchDesc(key='test', field='value', write_fn=_write_fn, validate_fn=_validate_fn)
+    bound = BoundEntity(href='/test/vs/0', capability=coordinator.bound[0].capability, desc=desc)
+
+    with pytest.raises(ServiceValidationError) as exc_info:
+        await coordinator.async_send_command(bound, 'On')
+    assert exc_info.value.translation_key == 'remote_control_disabled'
+
+
+async def test_send_command_bypasses_remote_control_when_option_enabled(
+    hass: HomeAssistant, mock_coordinator_observe_session
+) -> None:
+    """Issue #54: some devices accept certain writes even while reporting
+    remote control off, so a user who's confirmed that for their device can
+    opt it out of the block entirely via the options flow
+    (CONF_BYPASS_REMOTE_CONTROL, entry.options -- not entry.data)."""
+    from pytest_homeassistant_custom_component.common import MockConfigEntry
+
+    from custom_components.localthings.registry.discovery import BoundEntity
+    from custom_components.localthings.registry.entities import NumberDesc
+
+    entry = MockConfigEntry(
+        domain=DOMAIN, data=ENTRY_DATA, unique_id=f'localthings_{MOCK_SERIAL}',
+        options={CONF_BYPASS_REMOTE_CONTROL: True},
+    )
+    entry.add_to_hass(hass)
+
+    fake = mock_coordinator_observe_session
+    await hass.config_entries.async_setup(entry.entry_id)
+    await hass.async_block_till_done()
+    coordinator: LocalThingsCoordinator = hass.data[DOMAIN][entry.entry_id]
+    coordinator._cache.apply_rep(
+        '/remotectrl/vs/0',
+        {'x.com.samsung.da.remoteControlEnabled': 'false'},
+        source='test',
+    )
+
+    def _write_fn(payload, rep, href):
+        return (['some', 'path'], {'value': payload})
+
+    desc = NumberDesc(key='test', field='value', write_fn=_write_fn)
+    bound = BoundEntity(href='/test/vs/0', capability=coordinator.bound[0].capability, desc=desc)
+
+    with patch.object(fake, 'subscribe'):
+        fake.post = lambda *a, **k: (0x44, b'')
+        await coordinator.async_send_command(bound, 5)
+
+    assert coordinator._cache.get('/some/path') == {'value': 5}

tests/localthings/test_observe.py

@@ -34,6 +34,28 @@ def test_apply_writes_through_when_not_settling():
     assert mgr.cache.get('/oven/vs/0') == {'a': 1}
 
 
+def test_apply_merges_partial_update_onto_prior_rep():
+    """Regression test for issue #27: a Bespoke fridge's /mode/vs/0 notify
+    (and even a later sweep entry for that href) can carry only `modes`,
+    omitting `supportedOptions` entirely. A full replace would wipe
+    `supportedOptions` from the cache the moment that partial update
+    arrives, even though the device's supported options didn't change --
+    which is exactly what made the flex-zone select disappear."""
+    mgr = _manager()
+    full = {
+        'x.com.samsung.da.modes': ['CVN_CONVERTIBLE_ZONE', 'CV_FDR_MEAT'],
+        'x.com.samsung.da.supportedOptions': ['CV_FDR_WINE', 'CV_FDR_MEAT'],
+    }
+    mgr.apply('/mode/vs/0', full, source='poll')
+
+    partial = {'x.com.samsung.da.modes': ['CVN_CONVERTIBLE_ZONE', 'WATERFILTER_ENABLE']}
+    mgr.apply('/mode/vs/0', partial, source='observe')
+
+    cached = mgr.cache.get('/mode/vs/0')
+    assert cached['x.com.samsung.da.modes'] == ['CVN_CONVERTIBLE_ZONE', 'WATERFILTER_ENABLE']
+    assert cached['x.com.samsung.da.supportedOptions'] == ['CV_FDR_WINE', 'CV_FDR_MEAT']
+
+
 def test_apply_drops_update_during_settle_window():
     mgr = _manager()
     mgr.cache.apply_rep('/oven/vs/0', {'a': 1}, source='seed')
@@ -45,6 +67,30 @@ def test_apply_drops_update_during_settle_window():
     assert mgr.cache.get('/oven/vs/0') == {'a': 1}
 
 
+def test_apply_optimistic_bypasses_an_in_progress_settle_window():
+    """Regression for issue #9: /course/vs/0 backs several independent
+    washer selects (cycle, detergent quantity, softener quantity, ...).
+    Picking a second one while the first's settle window is still open
+    (now sized to tens of seconds -- see coordinator._POST_TIMEOUT_S/
+    _POLL_TIMEOUT_S) is a normal sequence, not a stale echo of the first
+    write, and must land in the cache immediately -- not get silently
+    dropped by a guard that exists to protect optimistic writes, not
+    suppress them."""
+    mgr = _manager()
+    mgr.cache.apply_rep('/course/vs/0', {'Course': '1C', 'Detergent': '1'}, source='seed')
+    mgr.mark_write_pending('/course/vs/0', settle_s=30.0)
+
+    result = mgr.apply('/course/vs/0', {'Detergent': '2'}, source='optimistic')
+
+    assert result is True
+    assert mgr.cache.get('/course/vs/0') == {'Course': '1C', 'Detergent': '2'}
+
+    # A poll/sweep/observe update racing in right behind it is still
+    # gated -- the second write's own guard (re-armed by mark_write_pending,
+    # not exercised directly here) is what protects it going forward.
+    assert mgr.apply('/course/vs/0', {'Detergent': '1'}, source='poll') is False
+
+
 def test_apply_accepts_update_after_settle_window_elapses():
     mgr = _manager()
     mgr.mark_write_pending('/oven/vs/0', settle_s=0.05)

tests/test_air_purifier_capabilities.py

@@ -0,0 +1,116 @@
+"""Tests for the ARTIK051_TVTL_18K air-purifier profile (issue #56)."""
+from custom_components.localthings.registry.adapter import flatten
+from custom_components.localthings.registry.by_type import for_device_by_model
+from custom_components.localthings.registry.capabilities import air_purifier
+from custom_components.localthings.registry.discovery import discover
+from tests.conftest import _load_device
+
+
+def _purifier():
+    resources = _load_device('air_purifier')
+    info = resources['/information/vs/0']
+    reg = for_device_by_model(
+        info['x.com.samsung.da.modelNum'], info['x.com.samsung.da.description'],
+    )
+    return reg, resources
+
+
+def _state():
+    reg, resources = _purifier()
+    bound = discover(resources, reg.capabilities, reg.pattern_capabilities)
+    return flatten(bound, resources)
+
+
+def test_model_resolves_to_air_purifier_registry():
+    reg, _ = _purifier()
+    assert reg is not None
+    assert reg.name == 'air_purifier'
+
+
+def test_no_unbound_hrefs():
+    """Every resource in the issue #56 dump binds or is ignored -- clears the
+    coverage-gap repair."""
+    reg, resources = _purifier()
+    unbound = []
+    discover(resources, reg.capabilities, reg.pattern_capabilities, log=unbound.append)
+    assert unbound == []
+
+
+def test_expected_entities_present():
+    state = _state()
+    for key in (
+        'power_switch', 'alarm_code', 'dust', 'fine_dust', 'super_fine_dust',
+        'odor', 'clean_level', 'filter_progress', 'device_active',
+        'diagnosis_status', 'fan_speed_level', 'fan_direction',
+        'display_light', 'operating_mode',
+    ):
+        assert key in state, key
+
+
+def test_air_quality_sensor_values():
+    """Dust/FineDust/SuperFineDust/Odor/CleanLevel read index 0 of each
+    items[] entry's value list (the raw measurement, per common.sensor_item_value)."""
+    state = _state()
+    assert state['dust'] == 11
+    assert state['fine_dust'] == 9
+    assert state['super_fine_dust'] == 5
+    assert state['odor'] == 0
+    assert state['clean_level'] == 0
+
+
+def test_filter_progress_reads_named_consumable_item():
+    """FilterProgress is confirmed (issue #56) to count up as the filter
+    wears -- 100 means fully used and needs replacing, not "brand new"."""
+    assert _state()['filter_progress'] == 100
+
+
+def test_diagnosis_reuses_dishwasher_capability():
+    """/diagnosis/vs/0 has the identical field/write contract as
+    dishwasher.DIAGNOSIS, so the by_type registry reuses it directly."""
+    from custom_components.localthings.registry.capabilities import dishwasher
+    reg, _ = _purifier()
+    assert dishwasher.DIAGNOSIS in reg.capabilities['/diagnosis/vs/0']
+
+
+def test_light_switch_write_contract():
+    """The display-light switch writes only the changed 'Light_*' token
+    (via laundry.option_write) -- confirmed on real hardware (issue #54)
+    that the device merges by prefix itself, so no read-modify-write of the
+    whole packed /mode/vs/0 options list is needed."""
+    desc = next(e for e in air_purifier.MODE.entities if e.key == 'display_light')
+    rep = {'x.com.samsung.da.options': [
+        'Comode_Off', 'Blooming_0', 'Light_On', 'OptionCode_60282',
+    ]}
+    assert desc.rep_fn(rep) is True
+    assert desc.write_fn('Off', rep) == (
+        ['mode', 'vs', '0'],
+        {'x.com.samsung.da.options': ['Light_Off']},
+    )
+
+
+def test_operating_mode_is_a_read_only_diagnostic():
+    """Comode_* surfaces as a raw diagnostic sensor rather than a select/
+    control -- issue #56's five running-state dumps confirmed it reads 'Off'
+    regardless of the device's actual fan setting, ruling out the original
+    guess that it was the fan-speed selector; its real purpose is still
+    unconfirmed (see the air_purifier.py module docstring)."""
+    operating_mode = next(e for e in air_purifier.MODE.entities if e.key == 'operating_mode')
+    rep = {'x.com.samsung.da.options': ['Comode_Off']}
+    assert operating_mode.rep_fn(rep) == 'Off'
+    assert not hasattr(operating_mode, 'write_fn')
+
+
+def test_blooming_not_modeled():
+    """Confirmed (issue #56) to have no corresponding SmartThings app
+    setting -- dropped entirely rather than kept as an unexplained
+    diagnostic."""
+    assert not any(e.key == 'blooming_level' for e in air_purifier.MODE.entities)
+
+
+def test_airflow_vs_fallback_only_binds_without_generic():
+    """/airflow/vs/0 is a match_fn fallback -- it must not bind when the
+    OCF-standard /airflow/0 is also present (both are on every dump seen)."""
+    assert air_purifier.AIRFLOW_VS_FALLBACK.match_fn(
+        {}, {'/airflow/0': {'speed': 0, 'direction': 'Off'}},
+    ) is False
+    assert air_purifier.AIRFLOW_VS_FALLBACK.match_fn({}, {}) is True

tests/test_airconditioner_capabilities.py

@@ -6,7 +6,7 @@ climate entity itself lives in climate.py (imports homeassistant) and is not
 importable here -- consistent with how the other HA platform files are untested.
 """
 from custom_components.localthings.registry.adapter import flatten
-from custom_components.localthings.registry.by_type import for_device_by_model
+from custom_components.localthings.registry.by_type import for_device, for_device_by_model
 from custom_components.localthings.registry.capabilities import airconditioner
 from custom_components.localthings.registry.discovery import discover
 from custom_components.localthings.registry.entities import ClimateDesc
@@ -23,6 +23,22 @@ def _ac():
     return reg, resources
 
 
+def _resolve(name):
+    """Mirror the coordinator's detection order: oneUiVersion first, modelNum
+    fallback second (needed for issue #37's board, which reports neither
+    oneUiVersion nor a '_PRAC_' modelNum token)."""
+    resources = _load_device(name)
+    otn = resources.get('/otninformation/vs/0', {})
+    one_ui = otn.get('swVersionInfo', {}).get('oneUiVersion', '')
+    info = resources['/information/vs/0']
+    reg = for_device(one_ui) if one_ui else None
+    if reg is None:
+        reg = for_device_by_model(
+            info['x.com.samsung.da.modelNum'], info['x.com.samsung.da.description'],
+        )
+    return reg, resources
+
+
 def _bound():
     reg, resources = _ac()
     return discover(resources, reg.capabilities, reg.pattern_capabilities), resources
@@ -106,3 +122,138 @@ def test_climate_consumed_hrefs_declared_as_coverage():
         caps = reg.capabilities.get(href)
         assert caps, href
         assert all(c.entities == () for c in caps), href
+
+
+# ---------------------------------------------------------------------------
+# TP1X_DA-AC-RAC-01011 (oneUiVersion "7.0 Air conditioner", Tizen Lite) -- a
+# newer model class than the ARTIK051_PRAC dump above. It has no OCF-standard
+# /temperature/current+desired pair (temperature lives on the vendor
+# /temperatures/vs/0 items[] resource), exposes a /light/vs/0 display light, and
+# carries extra vendor housekeeping hrefs. Issue #17 for this class (PR #36).
+# ---------------------------------------------------------------------------
+
+def _ac_tp1x():
+    resources = _load_device('airconditioner_tp1x_da_ac_rac_01011')
+    one_ui = resources['/otninformation/vs/0']['swVersionInfo']['oneUiVersion']
+    return for_device(one_ui), resources
+
+
+def test_tp1x_resolves_to_airconditioner_registry():
+    reg, _ = _ac_tp1x()
+    assert reg is not None and reg.name == 'airconditioner'
+
+
+def test_tp1x_no_unbound_hrefs():
+    """Every resource in the TP1X dump binds or is covered -- including
+    /temperatures/vs/0, /light/vs/0 and the housekeeping hrefs absent from
+    the ARTIK051 dump. Clears the coverage-gap repair."""
+    reg, resources = _ac_tp1x()
+    unbound = []
+    discover(resources, reg.capabilities, reg.pattern_capabilities, log=unbound.append)
+    assert unbound == []
+
+
+def test_tp1x_display_light_switch_present():
+    """/light/vs/0 (mode On/Off) surfaces as the display-light switch."""
+    reg, resources = _ac_tp1x()
+    state = flatten(
+        discover(resources, reg.capabilities, reg.pattern_capabilities), resources)
+    assert state.get('display_light') is True  # device reports mode == 'On'
+
+
+def test_tp1x_vendor_temperature_and_light_covered():
+    """The vendor temperature resource (read by the climate entity) and the
+    display-light resource both resolve in the registry -- no gap."""
+    reg, _ = _ac_tp1x()
+    assert reg.capabilities.get('/temperatures/vs/0'), '/temperatures/vs/0'
+    assert reg.capabilities.get('/light/vs/0'), '/light/vs/0'
+
+
+def test_tp1x_climate_entity_is_bound():
+    """The composite climate entity still binds the primary /mode/vs/0."""
+    reg, resources = _ac_tp1x()
+    bound = discover(resources, reg.capabilities, reg.pattern_capabilities)
+    climate = [b for b in bound if isinstance(b.desc, ClimateDesc)]
+    assert len(climate) == 1 and climate[0].href == '/mode/vs/0'
+
+
+def test_tp2x_rac_20k_model_resolves_via_model_fallback():
+    """TP2X_RAC_20K (issue #37) reports no oneUiVersion and no '_PRAC_' token
+    -- resolved via the '_RAC_' modelNum fallback added for this device."""
+    reg, _ = _resolve('airconditioner_tp2x_rac_20k')
+    assert reg is not None and reg.name == 'airconditioner'
+
+
+def test_tp2x_rac_20k_no_unbound_hrefs():
+    reg, resources = _resolve('airconditioner_tp2x_rac_20k')
+    unbound = []
+    discover(resources, reg.capabilities, reg.pattern_capabilities, log=unbound.append)
+    assert unbound == []
+
+
+def test_tp1x_rac_model_resolves_via_one_ui_version():
+    """TP1X_DA-AC-RAC-01001_0000 (issue #38) self-reports oneUiVersion
+    '7.0 Air conditioner' -- resolved via for_device(), not the modelNum
+    fallback."""
+    reg, _ = _resolve('airconditioner_tp1x_rac')
+    assert reg is not None and reg.name == 'airconditioner'
+
+
+def test_tp1x_rac_no_unbound_hrefs():
+    reg, resources = _resolve('airconditioner_tp1x_rac')
+    unbound = []
+    discover(resources, reg.capabilities, reg.pattern_capabilities, log=unbound.append)
+    assert unbound == []
+
+
+def test_tp1x_rac_expected_state_keys_present():
+    reg, resources = _resolve('airconditioner_tp1x_rac')
+    bound = discover(resources, reg.capabilities, reg.pattern_capabilities)
+    state = flatten(bound, resources)
+    for key in ('climate', 'display_light', 'mute_once', 'selfcheck_status',
+                'selfcheck_result', 'current_limit_enabled', 'current_limit_level'):
+        assert key in state, key
+
+
+def test_caww_tp2_model_resolves_via_model_fallback():
+    """A-CAWW-TP2-20-COMMON (issue #52, System AC) reports no oneUiVersion
+    and no '_RAC_'/'_PRAC_' token -- resolved via the '-CAWW-' modelNum
+    fallback added for this device."""
+    reg, _ = _resolve('airconditioner_caww_tp2')
+    assert reg is not None and reg.name == 'airconditioner'
+
+
+def test_caww_tp2_no_unbound_hrefs():
+    """Every resource in the issue #52 dump binds or is ignored -- clears
+    the coverage-gap repair. Only new href beyond the existing RAC/PRAC
+    surface is /sac/installationinfo/vs/0 (opaque SAC installation topology,
+    ignored)."""
+    reg, resources = _resolve('airconditioner_caww_tp2')
+    unbound = []
+    discover(resources, reg.capabilities, reg.pattern_capabilities, log=unbound.append)
+    assert unbound == []
+
+
+def test_caww_tp2_sac_installationinfo_is_ignored():
+    ignored_hrefs = {cap.href for cap in airconditioner.COVERAGE}
+    assert '/sac/installationinfo/vs/0' in ignored_hrefs
+
+
+def test_mute_once_write_target():
+    write = airconditioner.MUTE_ONCE.entities[0].write_fn
+    assert write('On', {}) == (['option', 'muteonce', 'vs', '0'], {'muteonce': 'On'})
+    assert write('Off', {}) == (['option', 'muteonce', 'vs', '0'], {'muteonce': 'Off'})
+
+
+def test_display_light_write_target():
+    write = airconditioner.DISPLAY_LIGHT.entities[0].write_fn
+    assert write('On', {}) == (['light', 'vs', '0'], {'mode': 'On'})
+    assert write('Off', {}) == (['light', 'vs', '0'], {'mode': 'Off'})
+
+
+def test_current_limit_is_read_only():
+    """Meaning/write contract for the current-limit levels isn't confirmed
+    from the dump alone -- exposed as read-only diagnostic sensors rather
+    than a guessed writable control."""
+    for desc in airconditioner.CURRENT_LIMIT.entities:
+        assert getattr(desc, 'write_fn', None) is None

tests/test_by_type.py

@@ -41,6 +41,16 @@ class TestForDevice:
         assert isinstance(registry, DeviceRegistry)
         assert registry.name == 'refrigerator'
 
+    def test_for_device_returns_cooktop_registry(self):
+        registry = for_device('7.0 Cooktop')
+        assert registry is not None
+        assert registry.name == 'cooktop'
+
+    def test_for_device_returns_range_hood_registry(self):
+        registry = for_device('7.0 Range Hood')
+        assert registry is not None
+        assert registry.name == 'range_hood'
+
 
 class TestDeviceRegistries:
     """Tests for device registries themselves."""
@@ -180,6 +190,25 @@ class TestForDeviceByModel:
         assert reg is not None
         assert reg.name == 'airconditioner'
 
+    def test_cooktop_via_legacy_model_description(self):
+        """Older cooktops identify themselves as ARTIK051_GLOBAL_COOKTOP."""
+        from custom_components.localthings.registry.by_type import for_device_by_model
+        reg = for_device_by_model(
+            'ARTIK051_GB_CT_001|40424141|50000204001211000200000000000000',
+            'ARTIK051_GLOBAL_COOKTOP',
+        )
+        assert reg is not None
+        assert reg.name == 'cooktop'
+
+    def test_range_hood_via_ahd_model(self):
+        from custom_components.localthings.registry.by_type import for_device_by_model
+        reg = for_device_by_model(
+            'AHD-WW-TP1-22-COMMON|20136141|7800006B001713C44D00090001030000',
+            'AHD-WW-TP1-22-COMMON',
+        )
+        assert reg is not None
+        assert reg.name == 'range_hood'
+
     def test_washer_wf_prefix(self):
         """US front-load washers use the WF consumer-model prefix."""
         from custom_components.localthings.registry.by_type import for_device_by_model
@@ -200,6 +229,18 @@ class TestForDeviceByModel:
         assert reg is not None
         assert reg.name == 'washer'
 
+    def test_oven_via_oven_token(self):
+        """Issue #55: a wall oven (NV7000BS/ET5) reports no oneUiVersion and
+        an unrecognized consumer token ('NV'); it falls back to the '-OVEN-'
+        token in modelNum, mirroring the '-RANGE-' fallback for issue #44."""
+        from custom_components.localthings.registry.by_type import for_device_by_model
+        reg = for_device_by_model(
+            'TP1X_DA-KS-OVEN-0107X|40460041|50030018001611020A00000000000000',
+            'NV7000BS/ET5',
+        )
+        assert reg is not None
+        assert reg.name == 'oven'
+
     def test_unknown_model_returns_none(self):
         from custom_components.localthings.registry.by_type import for_device_by_model
         reg = for_device_by_model('SOME-UNKNOWN-BOARD', 'SOME-UNKNOWN-BOARD')
@@ -208,3 +249,38 @@ class TestForDeviceByModel:
     def test_empty_inputs_return_none(self):
         from custom_components.localthings.registry.by_type import for_device_by_model
         assert for_device_by_model('', '') is None
+
+
+class TestForDeviceByResources:
+    def test_na9300k_without_one_ui_or_information_is_cooktop(self):
+        from custom_components.localthings.registry.by_type import for_device_by_resources
+        from tests.conftest import _load_device
+
+        reg = for_device_by_resources(_load_device('cooktop'))
+
+        assert reg is not None
+        assert reg.name == 'cooktop'
+
+    def test_unrelated_mode_options_are_not_cooktop(self):
+        from custom_components.localthings.registry.by_type import for_device_by_resources
+
+        resources = {
+            '/mode/vs/0': {
+                'x.com.samsung.da.options': [
+                    'DeviceType_SOME_OVEN',
+                    'UpperLamp_Off',
+                ],
+            },
+        }
+
+        assert for_device_by_resources(resources) is None
+
+    def test_hood_resource_signature(self):
+        from custom_components.localthings.registry.by_type import for_device_by_resources
+        resources = {
+            '/hood/fanspeed/vs/0': {},
+            '/hood/lamp/vs/0': {},
+        }
+        reg = for_device_by_resources(resources)
+        assert reg is not None
+        assert reg.name == 'range_hood'

tests/test_climate_temperature_fallback.py

@@ -0,0 +1,38 @@
+"""Tests for the /temperatures/vs/0 fallback helper in climate.py (PR #36).
+
+`_temps_vs_item` is a pure module-level function (plain dict in, plain dict
+out) with no coordinator/entity dependency, so -- like select.py's `_display`
+in test_select_display.py -- it's testable directly even though the
+LocalThingsClimate entity itself needs a coordinator/hass fixture to
+exercise. This covers the actual fallback-selection logic that the
+registry-level "no unbound hrefs" tests in test_airconditioner_capabilities.py
+don't reach: TP1X-class firmware has no OCF-standard
+/temperature/current+desired pair, so current_temperature/target_temperature
+would silently be None without this fallback.
+"""
+from custom_components.localthings.climate import _temps_vs_item
+
+
+def test_temps_vs_item_returns_first_item():
+    rep = {
+        'x.com.samsung.da.items': [
+            {'x.com.samsung.da.current': '17.0', 'x.com.samsung.da.desired': '25.0'},
+        ],
+    }
+    assert _temps_vs_item(rep) == {
+        'x.com.samsung.da.current': '17.0', 'x.com.samsung.da.desired': '25.0',
+    }
+
+
+def test_temps_vs_item_empty_when_items_missing():
+    """OCF-pair devices don't populate /temperatures/vs/0's items at all --
+    callers must fall through to the OCF hrefs cleanly, not raise."""
+    assert _temps_vs_item({}) == {}
+
+
+def test_temps_vs_item_empty_when_items_is_empty_list():
+    assert _temps_vs_item({'x.com.samsung.da.items': []}) == {}
+
+
+def test_temps_vs_item_empty_when_items_entry_is_not_a_dict():
+    assert _temps_vs_item({'x.com.samsung.da.items': ['not-a-dict']}) == {}

tests/test_common_capabilities.py

@@ -26,6 +26,37 @@ def test_common_caps_discover_on_dishwasher(dishwasher_resources):
     assert 'power_switch' in keys
 
 
+class TestMergeOptionsField:
+    """merge_options_field() is the read side of issue #54's finding: a
+    write only needs to carry the changed token, so the coordinator uses
+    this to keep its optimistic cache entry complete (every sibling option
+    still present) without waiting on a real poll."""
+
+    def test_replaces_matching_prefix(self):
+        cached = ['DeviceType_0167', 'Course_16', 'GMT_04']
+        assert common.merge_options_field(cached, ['Course_1D']) == [
+            'DeviceType_0167', 'Course_1D', 'GMT_04',
+        ]
+
+    def test_appends_when_prefix_absent(self):
+        cached = ['DeviceType_0167']
+        assert common.merge_options_field(cached, ['NaturalSteam_On']) == [
+            'DeviceType_0167', 'NaturalSteam_On',
+        ]
+
+    def test_merges_multiple_tokens_independently(self):
+        cached = ['DetergentLevelCtrl_1', 'SoftenerLevelCtrl_0', 'GMT_04']
+        merged = common.merge_options_field(cached, ['SoftenerLevelCtrl_2'])
+        assert merged == ['DetergentLevelCtrl_1', 'SoftenerLevelCtrl_2', 'GMT_04']
+
+    def test_handles_missing_cache(self):
+        assert common.merge_options_field(None, ['Course_1D']) == ['Course_1D']
+
+    def test_ignores_malformed_tokens(self):
+        cached = ['Course_16']
+        assert common.merge_options_field(cached, ['nounderscore']) == ['Course_16']
+
+
 # ---------------------------------------------------------------------------
 # OCF-native / vendor '-vs' fallback pairs (power, kids-lock, remote control).
 # ---------------------------------------------------------------------------
@@ -84,6 +115,14 @@ class TestRemoteControlFallback:
         assert common.REMOTE_CONTROL_VS_FALLBACK.match_fn(
             {}, {'/remotectrl/0': {}, '/remotectrl/vs/0': {}}) is False
 
+    def test_polled_warm_so_write_gating_stays_fresh(self):
+        """coordinator.async_send_command blocks writes on this signal, so
+        it can't sit in the default 'cold' tier (refreshed only once per
+        30s summary poll) -- it needs the subscribe/subpoll cadence 'warm'
+        and 'hot' hrefs get instead."""
+        assert common.REMOTE_CONTROL_GENERIC.poll_tier == 'warm'
+        assert common.REMOTE_CONTROL_VS_FALLBACK.poll_tier == 'warm'
+
 
 # ---------------------------------------------------------------------------
 # Energy meter. instantaneousPower clamps negatives to 0, but the constant
@@ -130,3 +169,202 @@ class TestEnergyMeter:
         phantom power sensor (the exists_fn replaces the field-presence gate)."""
         pw = next(e for e in common.ENERGY_METER.entities if e.key == 'power_watts')
         assert pw.exists_fn({'x.com.samsung.da.cumulativePower': '5'}, {}) is False
+
+
+# ---------------------------------------------------------------------------
+# AI energy-saving level. '0' is off; supportedAiLevel lists the additional
+# level(s) on offer. A single-entry list (issue #21 fridge, issue #40 washer)
+# is really a binary toggle, so it's exposed as a switch instead of a
+# one-choice select; multiple entries get a select with '0' synthesized back
+# in as the explicit off option (supportedAiLevel never lists '0' itself, but
+# it's a real, observed value of aiLevel).
+# ---------------------------------------------------------------------------
+
+
+def _ai_energy_level_desc(cls_name):
+    return next(e for e in common.AI_ENERGY_LEVEL.entities
+                if e.__class__.__name__ == cls_name)
+
+
+class TestAiEnergyLevelSwitch:
+    def _desc(self):
+        return _ai_energy_level_desc('SwitchDesc')
+
+    def test_href(self):
+        assert common.AI_ENERGY_LEVEL.href == '/energy/ailevel/vs/0'
+
+    def test_shown_only_with_single_supported_level(self):
+        desc = self._desc()
+        assert desc.exists_fn({'aiLevel': '1', 'supportedAiLevel': ['1']}, {}) is True
+        assert desc.exists_fn({'aiLevel': '1', 'supportedAiLevel': ['1', '2']}, {}) is False
+
+    def test_hidden_when_supported_level_is_non_list_scalar(self):
+        """A stray scalar (e.g. a string) must not be len()-checked as if it
+        were a list -- a 2-char string would otherwise wrongly pass `== 1`
+        style checks."""
+        desc = self._desc()
+        assert desc.exists_fn({'aiLevel': '1', 'supportedAiLevel': '1'}, {}) is False
+
+    def test_hidden_when_supported_level_missing(self):
+        desc = self._desc()
+        assert desc.exists_fn({'aiLevel': '1'}, {}) is False
+
+    def test_hidden_when_supported_level_empty_list(self):
+        desc = self._desc()
+        assert desc.exists_fn({'aiLevel': '0', 'supportedAiLevel': []}, {}) is False
+
+    def test_hidden_on_empty_stub_rep(self):
+        desc = self._desc()
+        assert desc.exists_fn({}, {}) is False
+
+    def test_value_fn(self):
+        desc = self._desc()
+        assert desc.value_fn('0') is False
+        assert desc.value_fn('1') is True
+
+    def test_write_on_uses_the_single_supported_level(self):
+        """The on-value is whatever the device calls its one level, not a
+        hardcoded '1'."""
+        desc = self._desc()
+        path, body = desc.write_fn('On', {'supportedAiLevel': ['2']})
+        assert path == ['energy', 'ailevel', 'vs', '0']
+        assert body == {'aiLevel': '2'}
+
+    def test_write_off(self):
+        desc = self._desc()
+        path, body = desc.write_fn('Off', {'supportedAiLevel': ['1']})
+        assert body == {'aiLevel': '0'}
+
+
+class TestAiEnergyLevelSelect:
+    def _desc(self):
+        return _ai_energy_level_desc('SelectDesc')
+
+    def test_shown_only_with_multiple_supported_levels(self):
+        desc = self._desc()
+        assert desc.exists_fn({'aiLevel': '1', 'supportedAiLevel': ['1', '2']}, {}) is True
+        assert desc.exists_fn({'aiLevel': '1', 'supportedAiLevel': ['1']}, {}) is False
+
+    def test_hidden_when_supported_level_is_non_list_scalar(self):
+        desc = self._desc()
+        assert desc.exists_fn({'aiLevel': '1', 'supportedAiLevel': '12'}, {}) is False
+
+    def test_hidden_when_supported_level_missing(self):
+        desc = self._desc()
+        assert desc.exists_fn({'aiLevel': '1'}, {}) is False
+
+    def test_hidden_when_supported_level_empty_list(self):
+        desc = self._desc()
+        assert desc.exists_fn({'aiLevel': '0', 'supportedAiLevel': []}, {}) is False
+
+    def test_no_translation_key(self):
+        """aiLevel's values are plain digits that render fine untranslated
+        (select.py's _display()) -- no catalog entry to maintain
+        against an unknown number of future levels."""
+        desc = self._desc()
+        assert desc.translation_key is None
+
+    def test_options_synthesize_off(self):
+        """'0' is never in supportedAiLevel but is a real, observed aiLevel
+        value -- synthesized back in as the explicit off option."""
+        desc = self._desc()
+        resources = {'/energy/ailevel/vs/0': {'supportedAiLevel': ['1', '2']}}
+        assert desc.options(resources) == ['0', '1', '2']
+
+    def test_options_empty_when_resource_missing(self):
+        desc = self._desc()
+        assert desc.options({}) == ['0']
+
+    def test_write(self):
+        desc = self._desc()
+        path, body = desc.write_fn('2', {})
+        assert path == ['energy', 'ailevel', 'vs', '0']
+        assert body == {'aiLevel': '2'}
+
+
+class TestAiEnergyLevelStubDoesNotDecideThePlatform:
+    """Issue found in review: entity *creation* runs once, against whatever
+    snapshot is current when platforms are set up (see
+    __init__.py's async_config_entry_first_refresh-before-forward-entry-setups
+    ordering), while flatten() re-evaluates exists_fn every poll against live
+    data. Both descriptors share key='ai_energy_level' (see adapter._key), so
+    if a stub carve-out let one of them win at setup time while the other
+    wins once real data lands, flatten() would feed the already-instantiated
+    entity a value shaped for the other platform (e.g. a bool into a Select
+    expecting a string option). Neither side gets a `not rep` carve-out, so
+    an unfetched stub can never win entity creation for either platform --
+    the entity simply doesn't appear until a reload happens with real data,
+    same as any other exists_fn-gated entity in this codebase that's unlucky
+    on first-poll timing, instead of appearing as the wrong widget type."""
+
+    def test_neither_widget_exists_on_empty_stub_rep(self):
+        switch = _ai_energy_level_desc('SwitchDesc')
+        select = _ai_energy_level_desc('SelectDesc')
+        assert switch.exists_fn({}, {}) is False
+        assert select.exists_fn({}, {}) is False
+
+
+class TestSelfCheckError:
+    """Self-check diagnostic error list -- surfaced on hardware that reports
+    x.com.samsung.da.error, joined into a single display string."""
+
+    def _desc(self):
+        return next(e for e in common.SELF_CHECK.entities if e.key == 'selfcheck_error')
+
+    def test_exists_when_field_present(self):
+        desc = self._desc()
+        assert desc.exists_fn({'x.com.samsung.da.error': ['DA_ERROR_NONE']}, {}) is True
+
+    def test_does_not_exist_when_field_absent(self):
+        desc = self._desc()
+        assert desc.exists_fn({'x.com.samsung.da.status': 'Ready'}, {}) is False
+
+    def test_exists_for_empty_stub_rep(self):
+        """An empty {} rep is /device/0's not-yet-fetched-stub carve-out --
+        must be included-for-now, same as ENERGY_METER's fields."""
+        desc = self._desc()
+        assert desc.exists_fn({}, {}) is True
+
+    def test_value_joins_list(self):
+        desc = self._desc()
+        assert desc.value_fn(['E1', 'E2']) == 'E1, E2'
+
+    def test_value_passes_through_scalar(self):
+        desc = self._desc()
+        assert desc.value_fn('DA_ERROR_NONE') == 'DA_ERROR_NONE'
+
+    def test_value_none_for_empty_list(self):
+        """An empty error list means no value to show -- None (unknown),
+        not an empty string."""
+        desc = self._desc()
+        assert desc.value_fn([]) is None
+
+
+# ---------------------------------------------------------------------------
+# Cross-family bundles (UNIVERSAL / POWER) -- unpacked into every by_type
+# registry's _build([...]) call in place of the hand-duplicated capability
+# lists that used to live there.
+# ---------------------------------------------------------------------------
+
+
+class TestUniversalAndPowerBundles:
+    def test_universal_contains_the_no_conflict_capabilities(self):
+        assert set(common.UNIVERSAL) == {
+            common.ALARMS, common.ENERGY_METER, common.FIRMWARE_UPDATE,
+            common.SELF_CHECK, common.AI_ENERGY_LEVEL,
+            common.KIDS_LOCK_GENERIC, common.KIDS_LOCK_VS_FALLBACK,
+            common.REMOTE_CONTROL_GENERIC, common.REMOTE_CONTROL_VS_FALLBACK,
+        }
+
+    def test_power_kept_separate_for_airconditioners_sake(self):
+        """See common.POWER's own comment for why airconditioner opts out."""
+        assert set(common.POWER) == {common.POWER_GENERIC, common.POWER_VS_FALLBACK}
+
+    def test_no_overlap_between_the_two_bundles(self):
+        assert not (set(common.UNIVERSAL) & set(common.POWER))
+
+    def test_airconditioner_registry_does_not_include_power(self):
+        from custom_components.localthings.registry.by_type import airconditioner
+        bound_caps = {c for caps in airconditioner.REGISTRY.capabilities.values() for c in caps}
+        assert common.POWER_GENERIC not in bound_caps
+        assert common.POWER_VS_FALLBACK not in bound_caps

tests/test_cooktop_capabilities.py

@@ -0,0 +1,77 @@
+"""Tests for the read-only cooktop capability profile."""
+
+from custom_components.localthings.registry.adapter import flatten
+from custom_components.localthings.registry.by_type import cooktop
+from custom_components.localthings.registry.capabilities.cooktop import (
+    COOKTOP_MODE,
+)
+from custom_components.localthings.registry.discovery import discover
+from tests.conftest import _load_device
+
+
+def _state(resources):
+    bound = discover(
+        resources,
+        cooktop.REGISTRY.capabilities,
+        cooktop.REGISTRY.pattern_capabilities,
+    )
+    return flatten(bound, resources)
+
+
+def test_real_cooktop_fixture_has_expected_idle_state():
+    state = _state(_load_device('cooktop'))
+
+    assert state['power_state'] is True
+    assert state['any_burner_active'] is False
+    assert state['burner_0_state'] == 'Ready'
+    assert state['burner_5_state'] == 'Ready'
+    assert state['main_timer_state'] == 'Ready'
+    assert state['main_timer_current'] == 0
+    assert state['cloud_connected'] is True
+    assert state['paired_hood_connected'] is False
+    assert state['paired_hood_power'] is False
+    assert state['paired_hood_fan_speed'] == 0
+    assert state['paired_hood_light'] is False
+
+
+def test_run_operation_marks_any_burner_active():
+    resources = _load_device('cooktop')
+    options = resources['/mode/vs/0']['x.com.samsung.da.options']
+    options[options.index('OperationState3_Ready')] = 'OperationState3_Run'
+
+    state = _state(resources)
+
+    assert state['burner_3_state'] == 'Run'
+    assert state['any_burner_active'] is True
+
+
+def test_cooktop_profile_has_no_write_functions():
+    """A local integration must never expose unverified remote ignition."""
+    descriptions = [
+        desc
+        for capabilities in cooktop.REGISTRY.capabilities.values()
+        for capability in capabilities
+        for desc in capability.entities
+    ]
+
+    assert descriptions
+    assert all(not hasattr(desc, 'write_fn') or desc.write_fn is None
+               for desc in descriptions)
+
+
+def test_static_slot_superset_has_headroom_for_other_layouts():
+    keys = {desc.key for desc in COOKTOP_MODE.entities}
+
+    assert {f'burner_{slot}_state' for slot in range(8)} <= keys
+
+
+def test_variant_slot_outside_na9300k_layout_is_discovered():
+    resources = _load_device('cooktop')
+    resources['/mode/vs/0']['x.com.samsung.da.options'].append(
+        'OperationState7_Ready',
+    )
+
+    state = _state(resources)
+
+    assert state['burner_7_state'] == 'Ready'
+    assert 'burner_2_state' not in state

tests/test_coordinator_raw_write.py

@@ -0,0 +1,137 @@
+"""Tests for LocalThingsCoordinator.async_raw_write -- the debug-only
+arbitrary-href write primitive backing the options-flow debug panel
+(issue #54). It deliberately bypasses the remote-control block and every
+write_fn/validate_fn, so this only exercises the primitive itself: it
+POSTs exactly the caller's body, reads the href back, and validates its
+inputs.
+"""
+from __future__ import annotations
+
+from unittest.mock import AsyncMock
+
+import cbor2
+import pytest
+from homeassistant.core import HomeAssistant
+from homeassistant.exceptions import ServiceValidationError
+from pytest_homeassistant_custom_component.common import MockConfigEntry
+
+from custom_components.localthings.const import (
+    CONF_HOST, CONF_LEAF_CERT_PEM, CONF_LEAF_KEY_PEM, CONF_PORT, DOMAIN,
+)
+from custom_components.localthings.coordinator import LocalThingsCoordinator
+
+ENTRY_DATA = {
+    CONF_HOST: '10.0.0.199',
+    CONF_PORT: 49154,
+    CONF_LEAF_CERT_PEM: '-----BEGIN CERTIFICATE-----\nTEST-LEAF\n-----END CERTIFICATE-----',
+    CONF_LEAF_KEY_PEM: '-----BEGIN PRIVATE KEY-----\nTEST-LEAF-KEY\n-----END PRIVATE KEY-----',
+}
+
+
+class _FakeRawWriteSession:
+    """Stand-in for DtlsCoapSession: records every POST verbatim and
+    answers the follow-up GET with a canned representation -- no real
+    DTLS/network involved."""
+
+    def __init__(self, post_code: int = 0x44, get_rep: dict | None = None):
+        self.post_calls: list[tuple[list[str], bytes]] = []
+        self.get_calls: list[list[str]] = []
+        self._post_code = post_code
+        self._get_rep = {} if get_rep is None else get_rep
+
+    def post(self, path_segs, payload, timeout=None):
+        self.post_calls.append((list(path_segs), payload))
+        return self._post_code, b''
+
+    def get(self, path_segs, timeout=None):
+        self.get_calls.append(list(path_segs))
+        return 0x45, cbor2.dumps(self._get_rep)
+
+    def pace(self):
+        pass
+
+
+@pytest.fixture
+def coordinator(hass: HomeAssistant) -> LocalThingsCoordinator:
+    entry = MockConfigEntry(
+        domain=DOMAIN, data=ENTRY_DATA, unique_id='localthings_RAWWRITE-TEST',
+    )
+    entry.add_to_hass(hass)
+    coord = LocalThingsCoordinator(hass, entry)
+    # async_raw_write kicks a full refresh after the write; a real refresh
+    # would try to poll a session that doesn't exist for this unit test, so
+    # replace it with a no-op the same way the reference test setup does.
+    coord.async_request_refresh = AsyncMock()
+    return coord
+
+
+async def test_raw_write_splits_href_and_posts_exact_body(coordinator) -> None:
+    fake = _FakeRawWriteSession(post_code=0x44, get_rep={'x.field': 'after'})
+    coordinator._session = fake
+
+    body = {'x.com.samsung.da.field': 'value', 'n': 1}
+    code, new_rep = await coordinator.async_raw_write('/course/vs/0', body)
+
+    assert len(fake.post_calls) == 1
+    posted_path, posted_bytes = fake.post_calls[0]
+    assert posted_path == ['course', 'vs', '0']
+    assert cbor2.loads(posted_bytes) == body
+
+    assert code == 0x44
+    assert new_rep == {'x.field': 'after'}
+    coordinator.async_request_refresh.assert_awaited_once()
+
+
+async def test_raw_write_reads_href_back_for_ground_truth(coordinator) -> None:
+    fake = _FakeRawWriteSession(post_code=0x45, get_rep={'value': 'confirmed'})
+    coordinator._session = fake
+
+    code, new_rep = await coordinator.async_raw_write('/washer/vs/0', {'a': 1})
+
+    assert fake.get_calls == [['washer', 'vs', '0']]
+    assert code == 0x45
+    assert new_rep == {'value': 'confirmed'}
+
+
+async def test_raw_write_returns_coap_code_from_post_not_get(coordinator) -> None:
+    """The returned code reflects the write's own response, even though a
+    follow-up GET (which could carry a different code in principle) runs
+    right after it."""
+    fake = _FakeRawWriteSession(post_code=0x80, get_rep={'value': 1})
+    coordinator._session = fake
+
+    code, _ = await coordinator.async_raw_write('/test/vs/0', {'a': 1})
+
+    assert code == 0x80
+
+
+async def test_raw_write_rejects_empty_dict(coordinator) -> None:
+    with pytest.raises(ServiceValidationError):
+        await coordinator.async_raw_write('/washer/vs/0', {})
+
+
+async def test_raw_write_rejects_non_dict_payload(coordinator) -> None:
+    with pytest.raises(ServiceValidationError):
+        await coordinator.async_raw_write('/washer/vs/0', ['not', 'a', 'dict'])  # type: ignore[arg-type]
+
+
+async def test_raw_write_rejects_empty_href(coordinator) -> None:
+    with pytest.raises(ServiceValidationError):
+        await coordinator.async_raw_write('', {'a': 1})
+
+
+async def test_raw_write_rejects_root_href(coordinator) -> None:
+    with pytest.raises(ServiceValidationError):
+        await coordinator.async_raw_write('/', {'a': 1})
+
+
+async def test_raw_write_validation_errors_do_not_touch_the_session(coordinator) -> None:
+    """A rejected call must fail before ever reaching the network -- no
+    session needs to be connected at all for validation to run."""
+    assert coordinator._session is None
+
+    with pytest.raises(ServiceValidationError):
+        await coordinator.async_raw_write('/washer/vs/0', {})
+
+    assert coordinator._session is None
+    coordinator.async_request_refresh.assert_not_awaited()

tests/test_coordinator_send_command.py

@@ -0,0 +1,94 @@
+"""Tests for LocalThingsCoordinator.async_send_command's optimistic-apply
+step, specifically for x.com.samsung.da.options[] writes (issue #54).
+
+The write itself only needs to carry the single changed token -- confirmed
+on real hardware, the device merges by prefix and evicts the stale token
+itself. But observe.ObserveManager.apply() does a shallow {**cached, **rep}
+field merge, so handing it that same minimal single-token body would
+overwrite the *whole* cached options[] field, wiping every sibling option
+(other courses/levels/toggles packed into the same array) until the next
+real poll lands. async_send_command must pre-merge the token into the
+cached array itself before applying it optimistically, while still POSTing
+only the minimal body over the wire.
+"""
+from __future__ import annotations
+
+from unittest.mock import AsyncMock
+
+import cbor2
+import pytest
+from homeassistant.core import HomeAssistant
+from pytest_homeassistant_custom_component.common import MockConfigEntry
+
+from custom_components.localthings.const import (
+    CONF_HOST, CONF_LEAF_CERT_PEM, CONF_LEAF_KEY_PEM, CONF_PORT, DOMAIN,
+)
+from custom_components.localthings.coordinator import LocalThingsCoordinator
+from custom_components.localthings.registry.capabilities import laundry
+from custom_components.localthings.registry.discovery import BoundEntity
+
+ENTRY_DATA = {
+    CONF_HOST: '10.0.0.199',
+    CONF_PORT: 49154,
+    CONF_LEAF_CERT_PEM: '-----BEGIN CERTIFICATE-----\nTEST-LEAF\n-----END CERTIFICATE-----',
+    CONF_LEAF_KEY_PEM: '-----BEGIN PRIVATE KEY-----\nTEST-LEAF-KEY\n-----END PRIVATE KEY-----',
+}
+
+
+class _FakeSendSession:
+    def __init__(self):
+        self.post_calls: list[tuple[list[str], bytes]] = []
+
+    def post(self, path_segs, payload, timeout=None):
+        self.post_calls.append((list(path_segs), payload))
+        return 0x44, b''
+
+    def pace(self):
+        pass
+
+
+@pytest.fixture
+def coordinator(hass: HomeAssistant) -> LocalThingsCoordinator:
+    entry = MockConfigEntry(
+        domain=DOMAIN, data=ENTRY_DATA, unique_id='localthings_SENDCMD-TEST',
+    )
+    entry.add_to_hass(hass)
+    coord = LocalThingsCoordinator(hass, entry)
+    coord.async_request_refresh = AsyncMock()
+    coord._session = _FakeSendSession()
+    return coord
+
+
+async def test_options_write_posts_only_the_changed_token(coordinator) -> None:
+    href = '/course/vs/0'
+    coordinator._observe.apply(href, {
+        'x.com.samsung.da.options': ['DeviceType_0167', 'Course_16', 'GMT_04'],
+    }, source='poll')
+
+    desc = laundry.cycle_select(translation_key='dryer_cycle', icon='x')
+    bound = BoundEntity(href=href, capability=None, desc=desc)
+
+    await coordinator.async_send_command(bound, '1D')
+
+    posted_path, posted_bytes = coordinator._session.post_calls[0]
+    assert posted_path == ['course', 'vs', '0']
+    assert cbor2.loads(posted_bytes) == {'x.com.samsung.da.options': ['Course_1D']}
+
+
+async def test_options_write_optimistic_cache_keeps_sibling_tokens(coordinator) -> None:
+    """The regression this guards: applying the minimal wire body straight
+    to the cache would wipe DeviceType_0167/GMT_04 until the next poll."""
+    href = '/course/vs/0'
+    coordinator._observe.apply(href, {
+        'x.com.samsung.da.options': ['DeviceType_0167', 'Course_16', 'GMT_04'],
+    }, source='poll')
+
+    desc = laundry.cycle_select(translation_key='dryer_cycle', icon='x')
+    bound = BoundEntity(href=href, capability=None, desc=desc)
+
+    await coordinator.async_send_command(bound, '1D')
+
+    cached = coordinator._cache.get(href)
+    assert cached['x.com.samsung.da.options'] == [
+        'DeviceType_0167', 'Course_1D', 'GMT_04',
+    ]

tests/test_discovery.py

@@ -158,6 +158,46 @@ def test_discover_match_fn_decline_is_not_logged_as_gap():
     assert seen == []
 
 
+def test_discover_pattern_cap_reads_name_field():
+    """A pattern cap's name_field normalizes a device-given instance name
+    (e.g. an ice maker's "CUBED_ICE") for use in the entity's display name,
+    independent of the href-derived key (issue #27)."""
+    cap = Capability(
+        href=None,
+        href_prefix='/icemaker/',
+        name_field='x.com.samsung.da.iceMaker.name',
+        entities=(BinarySensorDesc(key='enabled', field='x.com.samsung.da.iceMaker.state'),),
+    )
+    resources = {
+        '/icemaker/one/vs/0': {
+            'x.com.samsung.da.iceMaker.state': 'On',
+            'x.com.samsung.da.iceMaker.name': 'CUBED_ICE',
+        },
+        '/icemaker/two/vs/0': {
+            'x.com.samsung.da.iceMaker.state': 'On',
+            'x.com.samsung.da.iceMaker.name': 'ICE_BITES',
+        },
+    }
+    bound = discover(resources, {}, pattern_caps=[cap])
+    names = {b.href: b.instance_name for b in bound}
+    assert names == {
+        '/icemaker/one/vs/0': 'Cubed Ice',
+        '/icemaker/two/vs/0': 'Ice Bites',
+    }
+
+
+def test_discover_pattern_cap_name_field_absent_leaves_instance_name_none():
+    cap = Capability(
+        href=None,
+        href_prefix='/icemaker/',
+        name_field='x.com.samsung.da.iceMaker.name',
+        entities=(BinarySensorDesc(key='enabled', field='x.com.samsung.da.iceMaker.state'),),
+    )
+    resources = {'/icemaker/one/vs/0': {'x.com.samsung.da.iceMaker.state': 'On'}}
+    bound = discover(resources, {}, pattern_caps=[cap])
+    assert bound[0].instance_name is None
+
+
 def test_discover_rt_filter_gates_binding():
     """Cap with rt_filter must not bind a rep whose rt list does not match."""
     oven_mode_cap = Capability(

tests/test_dishwasher_capabilities.py

@@ -28,9 +28,7 @@ class TestCycleOptions:
         rep = {'x.com.samsung.da.options': ['DeviceType_0001', 'Course_0E', 'GMT_04']}
         path, body = desc.write_fn('90', rep)
         assert path == ['course', 'vs', '0']
-        assert body == {
-            'x.com.samsung.da.options': ['DeviceType_0001', 'Course_90', 'GMT_04'],
-        }
+        assert body == {'x.com.samsung.da.options': ['Course_90']}
 
 
 class TestDishwasherOptions:

tests/test_dryer_capabilities.py

@@ -59,11 +59,17 @@ def test_power_watts_gated_for_dead_sentinel():
 
 
 def test_course_bound_to_shared_course_vs_0():
-    """Dryer course uses the shared /course/vs/0 cycle select with dryer_cycle
-    translations, consistent with washer/dishwasher."""
+    """Dryer course uses the shared /course/vs/0 cycle select, with the
+    translation key built from the device's own course table (see
+    laundry.cycle_select) -- confirmed dryers report Table_03, matching
+    the shipped dryer_cycle_table_03 translations, consistent with
+    washer/dishwasher."""
     assert dryer.DRYER_COURSE.href == '/course/vs/0'
     desc = next(e for e in dryer.DRYER_COURSE.entities if e.key == 'cycle')
-    assert desc.translation_key == 'dryer_cycle'
+    assert callable(desc.translation_key)
+    table_03 = {'/st/dryercourse/vs/0': {'x.com.samsung.da.st.courseTable': 'Table_03'}}
+    assert desc.translation_key(table_03) == 'dryer_cycle_table_03'
+    assert desc.translation_key({}) == 'cycle'
     assert desc.options is laundry.cycle_options
     rep = {'x.com.samsung.da.options': ['Course_16', 'GMT_02']}
     assert desc.rep_fn(rep) == '16'

tests/test_entities.py

@@ -1,6 +1,6 @@
 from custom_components.localthings.registry.entities import (
     SensorDesc, BinarySensorDesc, SelectDesc, SwitchDesc, ButtonDesc,
-    NumberDesc, TimeDesc, ClimateDesc, PLATFORM_OF,
+    NumberDesc, TimeDesc, ClimateDesc, FanDesc, PLATFORM_OF,
 )
 
 
@@ -28,6 +28,7 @@ def test_platform_mapping_covers_all_subclasses():
     assert PLATFORM_OF[NumberDesc] == 'number'
     assert PLATFORM_OF[TimeDesc] == 'time'
     assert PLATFORM_OF[ClimateDesc] == 'climate'
+    assert PLATFORM_OF[FanDesc] == 'fan'
 
 
 def test_select_carries_options_and_write_fn():

tests/test_entity_naming.py

@@ -0,0 +1,51 @@
+"""Tests for translated entity naming and dynamic instance placeholders."""
+from custom_components.localthings.entity import LocalThingsEntity
+from custom_components.localthings.registry.capability import Capability
+from custom_components.localthings.registry.discovery import BoundEntity
+from custom_components.localthings.registry.entities import BinarySensorDesc
+
+
+class _FakeCoordinator:
+    device_serial = 'TEST-SERIAL'
+
+    def __init__(self, last_resources=None):
+        self.last_resources = last_resources or {}
+
+
+def _make_entity(desc, href='/x/vs/0', key_override=None, instance='', instance_name=None):
+    capability = Capability(href=href, entities=(desc,))
+    bound = BoundEntity(href=href, capability=capability, desc=desc,
+                         instance=instance, key_override=key_override,
+                         instance_name=instance_name)
+    return LocalThingsEntity(_FakeCoordinator(), bound)
+
+
+def test_descriptor_key_is_the_default_translation_key():
+    """A descriptor names itself through the catalog, keyed by its own key.
+
+    Nothing sets _attr_name: that would take precedence over HA's
+    translation catalog and make the entity untranslatable.
+    """
+    desc = BinarySensorDesc(key='enabled')
+    entity = _make_entity(desc, instance_name='Cubed Ice')
+    assert entity.translation_key == 'enabled'
+    assert not hasattr(entity, '_attr_name')
+
+
+def test_device_instance_name_becomes_translation_placeholder():
+    desc = BinarySensorDesc(
+        key='enabled', translation_key='instance_enabled', use_instance_name=True
+    )
+    entity = _make_entity(desc, key_override='icemaker_one_enabled',
+                           instance_name='Cubed Ice')
+    assert entity.translation_key == 'instance_enabled'
+    assert entity.translation_placeholders == {'instance_name': 'Cubed Ice'}
+    assert not hasattr(entity, '_attr_name')
+
+
+def test_href_instance_name_becomes_translation_placeholder():
+    desc = BinarySensorDesc(
+        key='enabled', translation_key='instance_enabled', use_instance_name=True
+    )
+    entity = _make_entity(desc, key_override='icemaker_one_enabled')
+    assert entity.translation_placeholders == {'instance_name': 'Icemaker One'}

tests/test_fridge_capabilities.py

@@ -171,6 +171,7 @@ class TestTp1xNativeDuplicateResources:
         assert 'ice_maker_enabled' not in state
         assert state['icemaker_one_enabled'] is True
         assert state['icemaker_two_enabled'] is True
+        assert state['selfcheck_error'] == 'DA_ERROR_NONE'
 
 
 class TestPantryZone:
@@ -228,3 +229,68 @@ class TestArtik051AndTp2xFixturesHaveCompleteCoverage:
         assert unbound == []
         state = flatten(bound, resources)
         assert state['flex_zone_mode'] == 'CV_FDR_BEVERAGE'
+
+
+class TestRefrigeratorAiEnergyLevelFixtureCoverage:
+    """AI energy-saving level (common.AI_ENERGY_LEVEL, see
+    test_common_capabilities.py) is exercised end-to-end here against the
+    refrigerator fixture/registry.
+
+    refrigerator_device.json's supportedAiLevel was extended to two entries
+    (['1', '2']) specifically to exercise the select branch -- the real
+    captured TP1X_REF_21K_US dump only ever reports one entry (switch
+    branch), so the select is synthetic-fixture-only for now."""
+
+    def test_synthetic_fixture_has_complete_coverage(self):
+        from custom_components.localthings.registry.adapter import flatten
+        from custom_components.localthings.registry.by_type import refrigerator
+        from custom_components.localthings.registry.discovery import discover
+        from tests.conftest import _load_device
+
+        resources = _load_device('refrigerator')
+        unbound = []
+        bound = discover(
+            resources,
+            refrigerator.REGISTRY.capabilities,
+            refrigerator.REGISTRY.pattern_capabilities,
+            log=unbound.append,
+        )
+        assert unbound == []
+        state = flatten(bound, resources)
+        assert state['ai_energy_level'] == '1'
+
+
+class TestSwitchOffIsNotInverted:
+    """Regression: several fridge SwitchDesc write_fns used ``'On' if p else 'Off'``.
+
+    The switch platform passes the literal string ``'Off'`` on turn-off (and
+    ``'On'`` on turn-on). ``'Off'`` is a non-empty, truthy string, so
+    ``'On' if p else 'Off'`` always evaluated to ``'On'`` — turning the switch
+    OFF silently re-sent ``On`` and the switch could never be turned off. The
+    guard must compare ``p == 'On'`` (as the other capability files already do).
+    """
+
+    # (switch descriptor, payload key it writes)
+    CASES = [
+        (fridge.ICEMAKER_NIGHTTIME.entities[0], 'ice.night.status'),
+        (fridge.STATUS_LOCK.entities[0], 'x.com.samsung.da.ado.devicecontrol'),
+        (fridge.STATUS_LOCK.entities[1], 'x.com.samsung.da.device.sound'),
+        (fridge.DEFROST_DELAY.entities[0], 'x.com.samsung.da.delayDefrost'),
+        (fridge.WELCOME_LIGHTING.entities[0], 'status'),
+        (fridge.CABINET_LIGHT.entities[1], 'light.dimming.status'),
+        (fridge.ICEMAKER_STATUS_FALLBACK.entities[0], 'x.com.samsung.da.iceMaker'),
+    ]
+
+    def test_turning_off_sends_off(self):
+        for desc, key in self.CASES:
+            _segs, payload = desc.write_fn('Off', {})
+            assert payload[key] == 'Off', (
+                f"{desc.key}: OFF must send 'Off', got {payload[key]!r} (inverted)"
+            )
+
+    def test_turning_on_sends_on(self):
+        for desc, key in self.CASES:
+            _segs, payload = desc.write_fn('On', {})
+            assert payload[key] == 'On', (
+                f"{desc.key}: ON must send 'On', got {payload[key]!r}"
+            )

tests/test_golden_regression.py

@@ -7,7 +7,9 @@ GOLDEN = Path(__file__).parent / 'fixtures' / 'golden'
 
 
 def _new_state_keys(name, resources):
-    from custom_components.localthings.registry.by_type import for_device, for_device_by_model
+    from custom_components.localthings.registry.by_type import (
+        for_device, for_device_by_model, for_device_by_resources,
+    )
     from custom_components.localthings.registry.discovery import discover
     from custom_components.localthings.registry.adapter import flatten
     otn = resources.get('/otninformation/vs/0', {})
@@ -19,6 +21,8 @@ def _new_state_keys(name, resources):
             info.get('x.com.samsung.da.modelNum', ''),
             info.get('x.com.samsung.da.description', ''),
         )
+    if reg is None:
+        reg = for_device_by_resources(resources)
     if reg is None:
         from custom_components.localthings.registry.registry import CAPABILITIES
         caps, pats = CAPABILITIES, []
@@ -81,6 +85,18 @@ def test_registry_reproduces_golden_state_keys_for_airconditioner():
     )
 
 
+def test_registry_reproduces_golden_state_keys_for_cooktop():
+    from tests.conftest import _load_device
+    resources = _load_device('cooktop')
+    golden = json.loads((GOLDEN / 'cooktop.json').read_text())
+    state_keys = _new_state_keys('cooktop', resources)
+    assert set(state_keys) == set(golden['state_keys']), (
+        f"state_keys mismatch:\n"
+        f"  extra:   {sorted(set(state_keys) - set(golden['state_keys']))}\n"
+        f"  missing: {sorted(set(golden['state_keys']) - set(state_keys))}"
+    )
+
+
 def test_registry_reproduces_golden_state_keys_for_tp1x_ref_21k_us():
     from tests.conftest import _load_device
     resources = _load_device('refrigerator_tp1x_ref_21k_us')
@@ -95,6 +111,18 @@ def test_registry_reproduces_golden_state_keys_for_tp1x_ref_21k_us():
     )
 
 
+def test_registry_reproduces_golden_state_keys_for_range_hood():
+    from tests.conftest import _load_device
+    resources = _load_device('range_hood')
+    golden = json.loads((GOLDEN / 'range_hood.json').read_text())
+    state_keys = _new_state_keys('range_hood', resources)
+    assert set(state_keys) == set(golden['state_keys']), (
+        f"state_keys mismatch:\n"
+        f"  extra:   {sorted(set(state_keys) - set(golden['state_keys']))}\n"
+        f"  missing: {sorted(set(golden['state_keys']) - set(state_keys))}"
+    )
+
+
 def test_registry_reproduces_golden_state_keys_for_washer_flexwash():
     """FlexWash twin washers (WV-prefix consumer model, e.g. WV55M9600AW)
     report no oneUiVersion and previously fell through for_device_by_model's
@@ -153,6 +181,119 @@ def test_registry_reproduces_golden_state_keys_for_tp2x_ref_20k():
     )
 
 
+def test_registry_reproduces_golden_state_keys_for_ac_tp1x_da_ac_rac_01011():
+    """Newer AC firmware (Tizen Lite, oneUiVersion "7.0 Air conditioner"; model
+    TP1X_DA-AC-RAC-01011) reports temperature via the vendor /temperatures/vs/0
+    items[] resource and adds a /light/vs/0 display light, with extra vendor
+    housekeeping hrefs -- issue #17 for this model class (PR #36)."""
+    from tests.conftest import _load_device
+    resources = _load_device('airconditioner_tp1x_da_ac_rac_01011')
+    golden = json.loads(
+        (GOLDEN / 'airconditioner_tp1x_da_ac_rac_01011.json').read_text()
+    )
+    state_keys = _new_state_keys('airconditioner_tp1x_da_ac_rac_01011', resources)
+    assert set(state_keys) == set(golden['state_keys']), (
+        f"state_keys mismatch:\n"
+        f"  extra:   {sorted(set(state_keys) - set(golden['state_keys']))}\n"
+        f"  missing: {sorted(set(golden['state_keys']) - set(state_keys))}"
+    )
+
+
+def test_registry_reproduces_golden_state_keys_for_tp2x_rac_20k():
+    """TP2X_RAC_20K (issue #37) -- reports no oneUiVersion; resolved via the
+    '_RAC_' modelNum token fallback in for_device_by_model."""
+    from tests.conftest import _load_device
+    resources = _load_device('airconditioner_tp2x_rac_20k')
+    golden = json.loads((GOLDEN / 'airconditioner_tp2x_rac_20k.json').read_text())
+    state_keys = _new_state_keys('airconditioner_tp2x_rac_20k', resources)
+    assert set(state_keys) == set(golden['state_keys']), (
+        f"state_keys mismatch:\n"
+        f"  extra:   {sorted(set(state_keys) - set(golden['state_keys']))}\n"
+        f"  missing: {sorted(set(golden['state_keys']) - set(state_keys))}"
+    )
+
+
+def test_registry_reproduces_golden_state_keys_for_caww_tp2():
+    """A-CAWW-TP2-20-COMMON (issue #52, System AC / multi-indoor-unit
+    commercial install) reports no oneUiVersion and no '_RAC_'/'_PRAC_'
+    token; resolved via the '-CAWW-' modelNum fallback in
+    for_device_by_model. Otherwise binds cleanly against the existing
+    airconditioner registry -- same TP1X/TP2X-class resource surface, plus
+    one SAC-only installation-topology resource (ignored)."""
+    from tests.conftest import _load_device
+    resources = _load_device('airconditioner_caww_tp2')
+    golden = json.loads((GOLDEN / 'airconditioner_caww_tp2.json').read_text())
+    state_keys = _new_state_keys('airconditioner_caww_tp2', resources)
+    assert set(state_keys) == set(golden['state_keys']), (
+        f"state_keys mismatch:\n"
+        f"  extra:   {sorted(set(state_keys) - set(golden['state_keys']))}\n"
+        f"  missing: {sorted(set(golden['state_keys']) - set(state_keys))}"
+    )
+
+
+def test_registry_reproduces_golden_state_keys_for_tp1x_rac():
+    """TP1X_DA-AC-RAC-01001_0000 (issue #38) -- fuller RAC board with display
+    light, self-check, mute-once, and a current-limit setting."""
+    from tests.conftest import _load_device
+    resources = _load_device('airconditioner_tp1x_rac')
+    golden = json.loads((GOLDEN / 'airconditioner_tp1x_rac.json').read_text())
+    state_keys = _new_state_keys('airconditioner_tp1x_rac', resources)
+    assert set(state_keys) == set(golden['state_keys']), (
+        f"state_keys mismatch:\n"
+        f"  extra:   {sorted(set(state_keys) - set(golden['state_keys']))}\n"
+        f"  missing: {sorted(set(golden['state_keys']) - set(state_keys))}"
+    )
+
+
+def test_registry_reproduces_golden_state_keys_for_range():
+    """Range/cooktop-oven combo (model TP1X_DA-KS-RANGE-0102X, issue #44) --
+    reports no oneUiVersion; resolved via the '-RANGE-' modelNum token
+    fallback in for_device_by_model. Reuses the oven family's cavity/
+    setpoint/mode/operational-state capabilities and adds range.py's
+    per-burner capabilities for the 4 burners this dump reports."""
+    from tests.conftest import _load_device
+    resources = _load_device('range')
+    golden = json.loads((GOLDEN / 'range.json').read_text())
+    state_keys = _new_state_keys('range', resources)
+    assert set(state_keys) == set(golden['state_keys']), (
+        f"state_keys mismatch:\n"
+        f"  extra:   {sorted(set(state_keys) - set(golden['state_keys']))}\n"
+        f"  missing: {sorted(set(golden['state_keys']) - set(state_keys))}"
+    )
+
+
+def test_registry_reproduces_golden_state_keys_for_air_purifier():
+    """ARTIK051_TVTL_18K (issue #56) -- reports no oneUiVersion; resolved via
+    the '_TVTL_' modelNum token fallback in for_device_by_model."""
+    from tests.conftest import _load_device
+    resources = _load_device('air_purifier')
+    golden = json.loads((GOLDEN / 'air_purifier.json').read_text())
+    state_keys = _new_state_keys('air_purifier', resources)
+    assert set(state_keys) == set(golden['state_keys']), (
+        f"state_keys mismatch:\n"
+        f"  extra:   {sorted(set(state_keys) - set(golden['state_keys']))}\n"
+        f"  missing: {sorted(set(golden['state_keys']) - set(state_keys))}"
+    )
+
+
+def test_registry_reproduces_golden_state_keys_for_oven():
+    """Wall oven (model TP1X_DA-KS-OVEN-0107X, issue #55) -- reports no
+    oneUiVersion; resolved via the '-OVEN-' modelNum token fallback in
+    for_device_by_model, mirroring the '-RANGE-' fallback added for
+    issue #44. Before that fallback existed the device type came back
+    'unknown' and every href fell through to the global CAPABILITIES
+    registry instead of the oven family's own."""
+    from tests.conftest import _load_device
+    resources = _load_device('oven')
+    golden = json.loads((GOLDEN / 'oven.json').read_text())
+    state_keys = _new_state_keys('oven', resources)
+    assert set(state_keys) == set(golden['state_keys']), (
+        f"state_keys mismatch:\n"
+        f"  extra:   {sorted(set(state_keys) - set(golden['state_keys']))}\n"
+        f"  missing: {sorted(set(golden['state_keys']) - set(state_keys))}"
+    )
+
+
 def test_resources_from_batch_preferred_over_flat():
     from tests.conftest import _resources_from_dump
     dump = {