Addresses the reuse finding skipped in the previous /simplify pass:
washer's bubble soak/pre-wash/intensive switches and dishwasher's storm
wash/auto release dry switches were two separate implementations of the
same '<prefix>_On'/'<prefix>_Off' read-modify-write-on-options[] contract.
Moved bool_option_write/bool_option_value/bool_option_exists/
bool_option_switch into laundry.py (same module that already owns
cycle_write/cycle_select for the identical 'Course' token), and pointed
both washer.py and dishwasher.py at it. washer.py keeps only its
washer-specific per-course validate_fn, passed into the shared factory
as a prebuilt callable -- the factory itself has no opinion on validation.
No behavior change; re-verified every existing assertion (washer toggles,
dishwasher storm_wash/auto_release_dry, dosing alarms) plus all golden
state-key sets by hand against the refactored code.
/simplify pass on the bubble soak/pre-wash/intensive switches:
- Move validate_fn dispatch from switch.py into coordinator.async_send_command,
next to the existing write_fn getattr -- every platform gets validation for
free instead of switch.py hand-rolling it alone, and it avoids building the
full resources snapshot twice per write (switch.py was calling
coordinator.last_resources twice; the coordinator now snapshots once, and
only when a validate_fn is actually present).
- Collapse the four per-switch factories (write/value/exists/validate) plus
the _AVAILABILITY_FIELD side-table into one _bool_option_switch() that
builds the SwitchDesc directly, so the three call sites read as one line
each instead of six, and a typo'd prefix can no longer silently KeyError
against a separate lookup table.
- Rename _dosing_alarm_exists to _option_exists and reuse it for the new
switches too -- it was already the exact same "is this token present"
check the toggles need.
No behavior change; re-verified write_fn/rep_fn/exists_fn/validate_fn against
the same fixtures and golden state-key sets as before.
Add a validate_fn hook to SwitchDesc, checked in switch.py before dispatch
and surfaced as a ServiceValidationError so an unsupported write shows a
real error in the UI instead of the coordinator's silent log-only rejection.
Wired it into the three course-gated washer switches using their
availability bitmaps (BubbleSoakSet/PreWashAvailableSet/IntensiveAvailableSet),
which line up positionally with editCourseList. Turning a toggle off is
never blocked, and the check fails open whenever the course or bitmap can't
be resolved.
Also fixes a bug in _bool_option_write: it took a `p and 'On' or 'Off'`-style
truthy check, but switch.py always calls it with the string 'On' or 'Off' --
both truthy, so every write landed as 'On' regardless of intent.
A follow-up dump confirmed these ride as plain BubbleSoak_On/Off,
PreWashSetting_On/Off, and IntensiveSetting_On/Off tokens in the same
/course/vs/0 options array as the cycle select, so they're exposed as
self-gating config switches the same way other options-array fields are.
Per-cycle availability (BubbleSoakSet/PreWashAvailableSet/IntensiveAvailableSet)
lines up positionally with editCourseList but isn't used for gating, since
exists_fn only runs once at setup against whatever course happened to be
active then.
A washer/dryer combo user's editCourseList carries five Course_XX codes
that weren't named in washer_cycle: 36 (Wash+Dry), 37 (Air Wash),
38 (Cotton Dry), 39 (Synthetics Dry), and 1F (Intense Cold, distinct
from the existing 8F code used by non-combo models).
Closes the coverage-gap repair for two more room-AC boards (issues #37,
- TP2X_RAC_20K reports no oneUiVersion and no '_PRAC_' modelNum token, so
its device type went unrecognized -- add a '_RAC_' fallback token to
for_device_by_model.
- Bind the resources both dumps actually populate: mute-once (switch),
display light (switch), self-check (reused from fridge.SELF_CHECK), and
the circuit-breaker current-limit setting (read-only diagnostic sensors,
since its write contract isn't confirmed from the dump).
- Ignore the rest as plumbing/opaque/unconfirmed: control-set descriptor,
keepnormalstate flag, software-reset trigger, AI Sleep handshake,
absence-monitoring stubs, remote-data-control, remote-temperature,
reservation ruleset, and the welcome-temperature tracker.
Adds scrubbed fixtures + goldens for both dumps and extends the AC
capability/golden-regression tests to assert zero unbound hrefs.
Adds two small, additive fridge capabilities:
- AI_ENERGY_LEVEL: a select on /energy/ailevel/vs/0 exposing the AI
energy-saving level, gated behind supportedAiLevel actually offering
more than one choice (previously globally ignored since every dump
seen only reported a single supported level).
- selfcheck_error: a diagnostic sensor on the existing SELF_CHECK
capability surfacing x.com.samsung.da.error from the last self-check,
for hardware that reports it.
This does not touch FLEX_ZONE, /mode/vs/0, or /icemaker/status/0.
Covers the #19-#27 fridge/washer coverage-gap batch: FlexWash (WV) and
washer/dryer combo detection, the CV_FDR_ flex-zone fix (also closes#32),
the Cool Select Zone pantry select, and the new energy sensors.
Review follow-up (Opus + /simplify) on the previous commit:
- power_energy_kwh/energy_saved_kwh/energy_last_month_kwh/
energy_this_month_kwh used a plain `field in rep` exists_fn, unlike their
siblings power_watts/energy_kwh in the same capability. Per
entity._is_included, an explicit exists_fn bypasses the stub carve-out
entirely -- an empty {} rep at platform setup (device/0 returned a
not-yet-fetched stub) would permanently drop these entities for the
session instead of picking them up once a sub-poll populates the
resource. Restore the same `not rep or ...` guard used above.
- fridge._flex_zone_current/_flex_zone_write independently rebuilt the same
supportedOptions set; factor into _flex_zone_supported.
- note in a comment that the flex-zone match assumes at most one
modes/supportedOptions overlap (true on every dump seen); add the
missing negative assertion that dry_level self-gates off on a plain
washer (was only positively asserted on the combo fixture).
Six new diagnostics dumps, six gaps closed:
- refrigerator: bind /diagnosis/vs/0 (reuse dishwasher.DIAGNOSIS -- same
shape) into the refrigerator registry; it was never wired up there,
tripping the coverage repair on any fridge that reports it (#20, #26).
- refrigerator: add PANTRY_ZONE for the Cool Select Zone pantry compartment
(/status/pantry/one/vs/0, x.com.samsung.da.mode/supportedOptions) -- same
shape as BEVERAGE_ZONE but a distinct resource/field set (#20).
- refrigerator: generalize FLEX_ZONE to identify the current mode by list
membership in supportedOptions instead of a hardcoded
CV_TTYPE_RF9000A_ prefix check. TP1X/Bespoke-class fridges use a
CV_FDR_ prefix instead, which the old code didn't recognize -- the
select existed but always read as unknown, and writing to it would have
appended a duplicate CV_FDR_ flag rather than replacing the existing one
(#26, #27; also closes#32).
- common: add energy_saved_kwh (x.com.samsung.da.cumulativeSavedPower) and
power_energy_kwh (x.com.samsung.da.cumulativeConsumption) to the shared
energy meter, plus fridge-only energy_last_month_kwh/energy_this_month_kwh
(monthlyConsumption/thismonthlyConsumption) -- all self-gating on field
presence (#26).
- by_type: add the WV consumer-model prefix (FlexWash twin washers, e.g.
WV55M9600AW) to the by-model fallback map. These report no oneUiVersion
and previously matched no prefix at all, so they fell all the way
through to the unrecognized-device registry with zero capabilities
bound (#19).
- washer: add a self-gating dry_level select to WASHER_SETTINGS for
washer/dryer combo units, which carry a writable dryLevel field
directly on /washer/vs/0 with no separate dryer resource or course
(#22).
The reset-water-filter button and "ice type vs. two named icemakers"
requests from #26/#27 are left alone -- no write contract or exclusivity
behavior is evidenced in either dump, and both icemakers report On
simultaneously on the Bespoke unit, so synthesizing a single-select would
be a guess rather than a fix.
Adds scrubbed fixtures + goldens for FlexWash, a washer/dryer combo,
ARTIK051_REF_17K, and TP2X_REF_20K, plus unit tests for the new/changed
capabilities.
- WV consumer-model prefix (FlexWash twin washers, e.g. WV55M9600AW)
wasn't in the by-model fallback map, so these units fell through to
the unknown-device registry with zero capabilities bound (#19).
- Washer/dryer combo units carry a writable dryLevel field directly on
/washer/vs/0 with no separate dryer resource; add a self-gating
select for it, off supportedDryLevel presence, so plain washers are
unaffected (#22).
Covers the air-conditioner support (#17) and the washer dosing-select /
diagnostics fixes (#9). main was still advertising 0.6.0 despite the AC work
already merging, so this moves it for the next release.
Quality-only cleanups on the air-conditioner support, no behavior change:
- climate.py: reuse common.normalize_temp_unit for the C/F unit read (also
handles the "Celsius"/"Fahrenheit" long forms); collapse the three
fan/swing/preset read properties into _read_mode/_read_modes and the three
write setters into _set_mapped, removing the copy-paste.
- Single source of truth for the climate-consumed hrefs: they lived both as
constants in climate.py and as a list in airconditioner.py. Declare them
once in airconditioner.py (HREF_* + CLIMATE_CONSUMED_HREFS, which also builds
the COVERAGE caps) and import them into climate.py, so a new sibling read
can't drift out of sync with its coverage entry.
Two fixes for issue #9 (WW90T634DHE washer):
- washer dosing selects: the four detergent/softener dosing selects read their
current value from `<Prefix>LevelCtrl_<code>` (un-padded, e.g. "3") but their
options from `Supported<Prefix>LevelCtrl_<hexpairs>` (zero-padded, e.g. "03").
HA's SelectEntity renders a select "unknown" whenever current_option is not in
options, so all four sat "unknown" (idle and running) even though every other
select worked -- which is why it was only those four. Normalize the current
value to the supported code with the same integer value so it matches an
option (and its translation); convert back to the device's native un-padded
format on write.
- diagnostics: pkg_version("smartthings-local") reads package metadata off disk
(listdir + open + read_text), tripping HA's event-loop blocking-call detector.
Offload it to the executor. Audited the rest of the package: config_flow's
socket/crypto and every coordinator DTLS call are already offloaded via
async_add_executor_job -- this was the only blocking call left on the loop.
Also documents air-conditioner support in the README (device table, capability
module list, platform list), missed when that support landed.
Updates the washer dosing tests to the corrected value/write format and adds a
current-option-is-a-valid-option regression; adds a diagnostics test asserting
the version lookup runs off the event loop.
Add support for Samsung room air conditioners (ARTIK051_PRAC-class), the
first device whose core controls map onto a single Home Assistant `climate`
entity rather than a scatter of switches/selects/numbers.
- New `climate` platform + `ClimateDesc`: one composite entity that reads
power, HVAC mode, current/target temperature, fan (wind) strength, swing
(wind direction) and the convenient-mode preset across several OCF
resources and writes back to each. On/off folds into HVACMode.OFF /
TURN_ON/OFF; convenient mode folds into preset_mode. The entity binds one
primary resource (/mode/vs/0) and reads its siblings from the coordinator
snapshot, reusing the cross-resource read pattern from number/select.
- New `airconditioner` capability module + by_type registry, routed via the
`_PRAC_` modelNum token. Reuses common ALARMS/ENERGY_METER,
fridge.FIRMWARE_UPDATE and dishwasher.DIAGNOSIS; air purify and auto clean
as config switches; air dust filter status/usage as diagnostics (usage
normalized to a percentage of rated capacity).
- Climate-consumed and all-zero/ambiguous resources (temperature/wind,
/sensors, /humidity) are declared as AC-scoped coverage so every href in
the dump binds or is covered -- no coverage-gap repair.
- Fan/swing modes map onto HA standard constants (auto-localized); the
custom fan `turbo`, presets `quiet/smart/speed`, and the filter-status
enum get translations in strings.json + translations/en.json.
- Scrubbed fixture, golden, and tests: registry routing, zero unbound
hrefs, the climate write contract, and filter-% normalization.
Review follow-up. An explicit exists_fn bypasses entity._is_included's
empty-{} stub carve-out, so the sentinel-aware energy meter would drop
power_watts/energy_kwh when /device/0 returns a not-yet-fetched stub for
/energy/consumption/vs/0. Restore the carve-out (`not rep or ...`), and
hide power_watts when instantaneousPower is absent from a populated rep
(not just when it's the -500 sentinel) so a partial rep can't spawn a
phantom power sensor.
First full dryer dump (issue #14, DV90BB5245AES1) surfaced 5 unbound
hrefs and an "incomplete capability coverage" repair. Handle them and,
while here, make the washer/dryer/dishwasher families consistent instead
of each carrying a bespoke variant of the same controls.
Dryer coverage:
- /power/0, /kidslock/0, /remotectrl/0: bind via the OCF-native + vendor
fallback pairs (prefer the standard OCF resource, fall back to -vs).
- /buzzersound/vs/0: new Buzzer sound select.
- /course/vs/0: cycle select shared with washer/dishwasher; ignore the
/st/dryercourse/vs/0 re-encoding (mirror of /st/washercourse/vs/0).
Consistency / de-duplication:
- Move generic OCF controls (power/kids-lock/remote-control fallback
pairs, energy meter) into common.py; every registry uses them.
- Move shared laundry controls (buzzer, job-beginning-status, and the
/course/vs/0 cycle-select machinery) into laundry.py; washer and
dishwasher stop hand-rolling their own copies.
- Energy meter is now sentinel-aware everywhere: the dead '-500'
instantaneousPower reading no longer shows a misleading 0 W (fixes it
on dryers and dishwashers, matching the earlier washer fix).
- Job-beginning-status reads x.com.samsung.da.currentStatus, the field
every dump actually carries; the dryer sensor was previously blank.
Adds a scrubbed dryer fixture, golden, and capability tests, plus an
.claude/skills/adding-device-support skill capturing the dump-reading,
OCF-vs-vendor, entity-taxonomy, and coverage workflow. Bumps to 0.6.0.
The config flow only probed 49154/49155, so appliances whose local
CoAP/DTLS API binds elsewhere in the ephemeral range (e.g. a dishwasher
answering on 49153) could never be added.
Add a fast UDP liveness sweep across 49152-49160 that uses the ICMP
port-unreachable / ECONNREFUSED asymmetry to find the live port(s)
before attempting the expensive DTLS handshake. Closed ports fall out
immediately; a live-but-silent port is kept as a candidate. The real
handshake then runs only against discovered ports, preferring the
historically known 49154/49155 when several look live.
Also drop the probe's /device/0 GET deadline from a bare 15s literal to
a named PROBE_GET_TIMEOUT_S constant (10s) — the slowest observed full
dump is ~8s, and 10s matches the per-resource read timeout used
elsewhere.
Bumps version to 0.5.0.
machine_state was rendering the raw lowercase OCF values (idle/active/
pause) untranslated in the UI. Add device_class=enum, options, and a
translation_key matching the existing pattern used by ice_making_status
and connection_mode, in both the shared operational.py capability and
oven.py's separate machine_state sensor.
Bump patch version for this fix plus the ice_type 'off' translation and
iot_class correction earlier on this branch.
The refrigerator fixture's x.com.samsung.da.iceType.supported list
includes "Off" alongside the whiskey_iceball_* values, but strings.json
only translated the whiskey_iceball options, leaving "Off" to render
untranslated in the ice-type select.
Coordinator prefers CoAP OBSERVE push notifications (observe.py) over
polling when the device supports it, falling back to polling only when
observe mode isn't available or drops.
Assumes the LevelCtrl code scheme is None/Low/Medium/High (00-03) on both
dispensers -- code 00 has no on-screen equivalent in the app's 3-choice
Faible/Moyen/Élevé picker, assumed to be what "Activation" off collapses
to -- and Level2Ctrl is Soft/Medium/Hard for detergent water hardness,
1x/2x/3x for softener concentration. detergent_quantity and
softener_quantity share one translation_key (same vocabulary), same
pattern as fridge.py's shared 'brightness_level' key.
Not cross-device verified: only one dump + screenshot set (issue #9) to go
on, and the softener concentration reading doesn't cleanly match its
screenshot (assumed to be a setting changed between dump and screenshots,
not a different code scheme -- see the comment in washer.py).
progress_percentage lacked the active-state gate already applied to
progress/cycle_active/finish_time, so it kept showing a stale device value
(e.g. 1%) while idle -- now zeroed the same way. Shared by dryer/dishwasher/
oven via operational.py's OPERATIONAL_STATE.
Also exposes detergent/softener auto-dispense quantity, water hardness/
concentration, and low-reservoir alarms from /course/vs/0's options array,
using the same decode/RMW helpers already used for course selection and
drum-clean tracking. Gated by exists_fn so washer models without these
fields (e.g. the existing test fixture) are unaffected.
Water consumption is unaffected -- common.WATER_METER is already wired
into the washer registry; this reporter's device just doesn't expose
/water/consumption/vs/0.
Washer (#6): instantaneousPower is a dead sentinel ('-500') on every
TP1-class washer dump collected so far, and cumulativePower is absent
outright on at least one model. WASHER_ENERGY_METER now hides both
sensors instead of showing a misleading "0 W"/perpetual "unavailable".
Fridge (#7): temperature sensors/setpoints hardcoded '°F', ignoring the
unit each device actually reports per-reading -- fixed via a new
unit_fn hook read live from the resource. Also corrects
DEFROST_BLOCK_STATUS's polarity (DEFROST_BLOCK_ON means actively
defrosting, not "blocked", confirmed against live dumps) and adds
REFRIGERATION_FALLBACK for /refrigeration/0, closing the last unbound
href surfaced by issue #7's diagnostic dump.
Oven: applies the same live-unit-reading fix defensively to
OVEN_SETPOINT, which shares the same aggregate resource shape.
Was left at 0.1.0 across the last two releases. Also de-hardcode the
diagnostics test's expected version so this doesn't happen again --
it now reads manifest.json directly instead of a copy-pasted literal.
Adds cycles-until-due and last-cleaned sensors decoded from the same
options[] array the course selector already reads (DrumCleanProposal_N -
WashingTimes_N for cycles remaining, DrumCleanLog_<iso> for last-cleaned),
verified byte-for-byte against a live app screenshot ("Potreba cistenia po
37 cykloch" / "Naposledy cistene pred 10 dnami").
Course selection is now a writable select entity sourced from each
device's own x.com.samsung.da.editCourseList (via a new options-as-callable
form on SelectDesc, reading the coordinator's full resource snapshot
instead of just the entity's own href), rather than a hardcoded course
table baked into Python. A MostUsed_ field on the same resource was
considered as a fallback but rejected after byte-level analysis showed it
doesn't reliably encode a course list. When a device never populates
editCourseList, the selector isn't created at all (exists_fn now takes
(rep, resources) to check a sibling href, matching the existing
match_fn(rep, resources) pattern).
Display names moved out of Python into strings.json/translations under
entity.select.{washer,dishwasher}_cycle.state.*, matching this
integration's existing translation_key convention (fridge.py's ice_type,
flex_zone_mode, etc.) instead of hardcoding English names in code.
discover() flagged /cycleinterface/vs/0, /drlc/0, and /operational/state/0
as unbound on real washer dumps, which would surface a spurious device
coverage gap for washer owners. All three are noise: cycleinterface is
empty on every dump seen, drlc/0 is an OCF-native duplicate of the
already-ignored /drlc/vs/0, and operational/state/0 is a read-only
OCF-native duplicate of /operational/state/vs/0 (already modeled by the
richer, write-capable operational.OPERATIONAL_STATE).
_normalize() lowercased every select's options/state for display, but
that's only needed for entities with a translation_key (whose
strings.json lookup requires lowercase keys, per hassfest). Untranslated
selects (Cycle, Smart Dry, Sound mode, LED brightness) had no lookup to
protect and were just getting mangled -- "AI Wash" became "ai wash",
"ExtraHigh" became "extrahigh", etc.
Replace with _display(), which only lowercases for translation_key
entities and otherwise passes the device's own casing through, with two
cosmetic fixups: a fully lowercase wire value (e.g. "voice") is
title-cased, and a PascalCase value (e.g. "ExtraHigh") gets a space at
the case boundary. Already human-friendly values pass through
untouched. Avoids hand-authoring strings.json translations for
open-ended, per-model option lists (e.g. dishwasher cycle names) that
would silently regress on any value we didn't enumerate.
x.com.samsung.da.delayStartTime is HH:MM:SS until the cycle starts
(e.g. "01:00" means 1 hour from pressing start), not a time of day. It
was wired up as a time entity with a suspicious hour % 24 wrap -- a
sign it was never really a clock time. Replace with a number entity
(0-24h, 1h steps) that reads/writes the field as elapsed hours.
Home Assistant 2026.3+ serves brand icons/logos for custom integrations
from a local brand/ directory before falling back to the CDN (see
developers.home-assistant.io/blog/2026/02/24/brands-proxy-api). Copied
Samsung's existing icon/logo assets from home-assistant/brands'
core_brands/samsung so the integration shows proper branding instead of
a placeholder. No manifest.json change needed -- has_branding is
auto-detected from the directory's presence.
Exposes whether a device is currently in observe (push) or poll mode,
for troubleshooting the observe-mode feature without digging through
logs. Disabled by default since it's not everyday-use information.
Replace the breadth/silence downgrade heuristic with a simpler rule: a
still-live OBSERVE session is never torn down on a sweep/cache mismatch
(the 30s sweep already corrects the cache regardless of mode) -- only a
proven reconnect invalidates subscriptions. A mismatch instead triggers
extra hot/warm subpolls this cycle as a bounded fallback.
Also stop treating a summary-poll block-level ACK timeout as session
death: distinguish TimeoutError (transfer was progressing, session
likely alive) from ConnectionError (session actually closed), backed by
a consecutive-timeout counter so a genuinely dead channel still
recovers. This was causing a flaky/slow device (e.g. a dishwasher) to
flap observe<->poll every ~45s on nothing but a slow blockwise GET.
Also remove the dead is_active/active_when scaffolding (never wired
into the coordinator) and add DEBUG logging for each OBSERVE notify
received, including its href.
Marc Billow